To Top

1958 Cutlas Power-Lock Brochure on eBay

• CATEGORIES: Advertising & Brochures, Features • TAGS: .

This Power-Lock was the first hub patented, copyrighted, and sold under the Cutlas brand. As I mention in my Free-Lock article, for reasons unknown, the president of Free-Lock became the president of Cutlas. Even more curious, the last two model of Free-Lock hubs were WL-57 and WL-58.

And, what was the Initial model of the first Cutlas hub you ask? That would be WL-6, shown below:

View all the information on eBay

cutlas-powerlock-hub-brochure1 cutlas-powerlock-hub-brochure2

 

 

8 Comments on “1958 Cutlas Power-Lock Brochure on eBay

  1. Maury

    It’s interesting that Cutlas chose to number their original 1958 hub for Jeeps using the WL prefix. This is the same prefix that Warn began using in 1953 when they introduced their initial locking hub, the WL-2, a model number they continued to use until the late 1960s. It would seem likely that “WL” stood simply for “Willys Locking”.

    It could be merely coincidental that Cutlas chose this same model number prefix. On the other hand, it could be that Cutlas wanted to use the same prefix as Warn did, but followed by higher digits than Warn used, to make it appear to some that their hubs were later models, and were perhaps further advanced than the Warn models.

    Another possibility could be that Kaiser Jeep got involved with the model numbering, and assigned those model numbers to the manufacturers for their respective Jeep-approved hubs. This could have been done to help Jeep dealers avoid confusing the various approved hub models they were selling.

    Any thoughts on this, Dave?

  2. David Eilers Post author

    In my email to you yesterday, I spaced that Warn was also using that prefix. I can’t imagine that would be a coincidence, but I don’t see any evidence Willys motors forced any other third party products to follow a model or naming scheme.

    WL for Warn would make sense, maybe standing for Warn Locking hubs??? Free-Locks early hubs didn’t have model designations, but the later hubs WL-57 and WL-58 did. But, why would Free-Lock use those letters?

    It’s a head scratcher.

  3. Maury

    Yeah, you’re right – I hadn’t thought of that, but the WL prefix could be short for “Warn Locking”. After the WL-1, Warn’s initial Automatic hub was model WA-1, and the first Lock-O-Matic hub was model WO-1.

    Toward that end, it would be interesting to know how Warn’s early manual locking hubs for Dodges, which were introduced around the same time as the WL-2’s, were numbered. I don’t have any literature which would indicate that, do you?

  4. Maury

    I think you’re definitely right about the “W” being for Warn, rather than for Willys. The enlargement from the 1964 Warn catalog linked to below shows the model numbers for the Chevy, Dodge, and Ford hubs – and they are all over the place. There are WL numbers in each of those columns, but also D, F, and K prefix’ed model numbers. It’s not surprising that Warn later converted all their hubs to M-prefixed model numbers!

    https://www.beamingpix.com/images/2019/02/06/1964-Warn-Pg-4-partial-enlargement.jpg

  5. Bill Shaw

    I have those Cutlas with the 2 big slot screws – great hubs, very mechanically simple. If anyone sees the decals, let me know

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe without commenting