CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1952 Flattie Issaquah, WA $24,997

September 19, 2021 • CATEGORIES: CJ-3A • TAGS: Dash, Fiberglass, Paint, Rollcage. This site contains affiliate links for which I may be compensated.

Lots of custom work on this stretched jeep. This may have a modified DJ-3A convertible windshield.

https://seattle.craigslist.org/est/ctd/d/issaquah-1952-willys-jeep-custom-off/7377672038.html

“This is an extremely custom 1952 Willys Jeep that has been extensively modified and is capable as a street, strip, or sand dune use.

It was a frame-off resto-mod project which features a boxed chassis, fabricated roll cage (certified), custom four link for rear suspension, and laser checked frame.

The engine is a professionally built (balanced and blueprinted) GM V8 Aluminum 406 ci / 7.0L block with aluminum DART heads, pro-comp high lift cam, Forged crankshaft/rods/pistons, and oversized oil pan. It has an Edelbrock intake manifold with 850 cfm Holley carburetor, Hooker headers with detachable mufflers/tailpipes

Continue reading →

To Top

1951 CJ-3A Salem, OR $8500

September 19, 2021 • CATEGORIES: CJ-3A • TAGS: Dash, Fiberglass. This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(06/24/2021) Looks solid. Has a fiberglass body.

https://salem.craigslist.org/cto/d/salem-1951-willys/7376232358.html

“1951 willys, Upgraded ! Newer frame , newer suspension, fiberglass body, 11″brakes, V6 , nostalgic daily driver. replaced odometer ,unknown miles .”

To Top

1953 CJ-3A Pendleton, OR $650

August 30, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

May have some parts value.

https://eastoregon.craigslist.org/pts/d/weston-53-willys-jeep/7369395330.html

“Title in hand
Project vehicle
Not Running
Call in the evenings before 8PM”

To Top

1949 CJ-3A Sumpter, OR $3995

August 30, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Needs some additional work to run.

https://eastoregon.craigslist.org/cto/d/sumpter-1949-willys-jeep/7359833323.html

“Nice little cj2a. Have been working on it but now priorities have changed. New water pump, break reservoir, points, plugs, rotor and cap and spark plug wires. Needs to hook a new fuel line from tank to fuel pump ( which also need replaced. the pump.). motor starts right up when you pour some gas into the carburetor. Great project if you want to restore or clean up and use as is. Mostly just surface rust. Only thru rust I’ve seen is in floorboard on passenger side, which has been plated under. If ad is up it’s available. CASH only and don’t need help selling and I’ve heard all the scams so don’t bother me with them.”

To Top

1952 CJ-3A(?) Petaluma, CA $3750

August 28, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

This has one fo the old aftermarket angled Flattie dashes, but it’s uncut.

https://sacramento.craigslist.org/cto/d/el-verano-1952-willys-jeep/7372084294.html

“1952 Willy’s Jeep project. Clean title on non op. 350 Chevy motor (not running), Real Muncie 4 speed trans with Hurst shifter, with Advance Adapter to model 18 transfer case, Dana 44 rear end with locker, model 25 front end with lockout hubs, power steering, fiberglass hood, bodywork complete, extra front and rear ends, and other extra parts.”

To Top

1951 CJ-3A Paso Robles, CA $5800

August 28, 2021 • CATEGORIES: CJ-3A • TAGS: Diamond-Plating. This site contains affiliate links for which I may be compensated.

It’s unclear how solid this body is, given the diamond-plate in the back and a patch on the side.

https://slo.craigslist.org/cto/d/paso-robles-jeep-willys-1951-cj3a/7371103112.html

“Rebuilt Buick 231 6cyl. even fire with less than 500 miles. The rebuild was 20 yrs ago and have all receipts. Three speed transmission with the 2 lever transfer case. New Rochester 2 barrel carb and plug wires. Motor runs perfect and is great for putting around in the country, For the street the jeep would require some attention.
Front bumper is plumbed into the radiator for additional water storage to prevent overheatings. Warn locking hubs and believe 538 gears. Have a 4 speed to go with it for extra $”

To Top

1951 CJ-3A Tustin, CA SOLD

August 28, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

A parts/project.

1951 cj3a it has a Vin tag Great starter project. Front clip is off and have start on freshing up the motor. I put the front clip temporarily back on for sale. I also have a box of parts I’ll upload later.. anything that came off is in there as well as new parts. I have a spare Trans too. If you didn’t want to rebuild the old one. Sold separately.. bill of sale. 2000 firm not a penny less. Might take trade PLUS CASH”

To Top

1953 CJ-3A Pasco, WA $10,000

August 4, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

This CJ-3A has a variety of updates. It includes a Bobcat fiberglass hood. You can see the front clip was extended to accommodate the longer frame.

https://www.facebook.com/marketplace/item/187630573405216

“1953 Willys on a 1970 CJ frame. 350 small block. Lockers front and rear and trusses. Selectable front & rear. 20 gallon gas tank. This thing is bad ass and will climb a tree. It was built to wheel. It’s too much power for me to handle. Includes full soft top and set of mounted mud tires. I have a file 3″ thick on all the stuff that was done to it.”

To Top

1951 CJ-3A Chico, CA Status Unknown

August 4, 2021 • CATEGORIES: CJ-3A • TAGS: Nice. This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was $14,000.

Has some updates.

“For sale is this beautiful 1951 Jeep CJ3, Original go devil 80hp – 4 Cyl, brand new phillipine body, original 3 speed manual , original Dana 44rear axle and Dana 30front axel, GM power steering, disc brakes, fule cell, new leaf springs, new tires, 6500lb winch, new shocks and stabilizer, new aftermarket gages, set up for toe bar.”

To Top

1951 Stainless CJ-3A Prineville, OR $10,000

August 4, 2021 • CATEGORIES: CJ-3A, stainless/jewels This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(07/12/2018) Interesting in that it has Hawaiian plates. Has some early Cutlas hubs.

https://www.facebook.com/marketplace/item/4193762177327357

“I’ll let the Pictures speak for themselves. Good story behind this Jeep
Stainless Body and Components. No Rust
Original 4 cylinder “Go Devil Engine”, and transmission. I was told it was original and research to me says it is.
3 speed transmission. Just so you know, top speed is about 45-50 mph.
Solid frame with some surface rust. Was Restored in the late 70’s early 80’s.
Some New parts on Jeep and in boxes. I bought it for the potential and don’t have time or a place to store it. But I will if I have to.”

To Top

1950 CJ-3A Divide, CO $2500

August 2, 2021 • CATEGORIES: CJ-3A • TAGS: bed-extension. This site contains affiliate links for which I may be compensated.

This looks like a good price. It appears to have a bed extension and some later model Free-Lock hubs.

https://cosprings.craigslist.org/cto/d/divide-1950-willys-jeep/7359513234.html

“Willys Jeep CJ2A with custom made truck bed and hydraulic pump for plow. It’s a restoration project and appears to be all original. Jeep is complete with drivetrain. It doesn’t run and didn’t when I purchased in 2008 from people in Crystola. I bought it to restore but didn’t get around to it.”

To Top

1949 CJ-3A San Antonio, TX $5000

August 2, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Runs and drives.

https://sanantonio.craigslist.org/pts/d/cibolo-jeep-willys/7355434290.html

“I have a 1949 CJ3A Jeep for sale. It runs and drives, has a blue bonded title. I got the parts to start the brakes, but haven’t installed them yet. It’s not a rust bucket and would be fine on a ranch as-is, but it needs work. It would be a fun project for someone who has the room and the mechanical ability for a do it yourself project. I am firm on the price.”

To Top

1951 CJ-3A Longmont, CO $7500

August 2, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

It sounds like the seller has put a lot of work into this refurbed Flattie.

https://boulder.craigslist.org/cto/d/niwot-willys-cj3a/7357785526.html

“EVERYTHING has been refurbished, rebuilt or replaced. No rust. My intention was to remain original (except it has functioning turn signals and a low-cut in speed alternator). If you’re interested, contact me and we’ll talk about it, or better, come see it. Clean Colorado title.

Work done / new parts:
Go Devil L Head 4 cylinder 134 Engine was rebuilt by PO
Rear differential rebuilt
Transmission rebuilt
Transfer case partially rebuild
KN air filter
New exhaust system
New Solex carburetor
New radiator
New wheels Continue reading →

To Top

1949 CJ-3A Bedias, TX $2000

August 2, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Not sure how much value is here.

https://collegestation.craigslist.org/cto/d/bedias-vintage-1949-jeep-willys/7355615537.html

“1949 Jeep Willys. Unregistered but will provide a Bill of Sale. It has been used as a farm vehicle for decades. Was last started 2 years ago. Needs some TLC. You will need to bring a trailer. $2000 cash only.”

To Top

1950? CJ-3A Union, MO $14,500

July 29, 2021 • CATEGORIES: CJ-3A • TAGS: Hardtop. This site contains affiliate links for which I may be compensated.

This appears to be a CJ-3A With a CJ-2A body OR a 3A body with CJ-2A bow holders(?). In any case, it looks in good shape with a Koenig hardtop.

https://stlouis.craigslist.org/ctd/d/union-1950-willys-door-utility-vehicle/7354187114.html

“This is a 1950 Willys 2 door 4×4 utility vehicle that has been redone. Fairly rare with the hardtop and no rust. A repaint and restoration in excellent condition. Mechanically good, the Willys runs and drives and everything works. The brakes will need some attention.”

To Top

1949 CJ-3A Easley, SC $12,000

July 29, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Has a variety of updates.

https://greenville.craigslist.org/cto/d/easley-1949-willys/7347665921.html

“RESTO MOD WILLYS
4.3 V6 T 14 trans . Jeep hits the road like a new one ! 60 mph cruising speed one hand on the wheel .She has power steering and tilt wheel ,bucket seats and console full size rear seat .new fuel tank and all guages work . This is like they should have been in 1949. Very nice solid jeep .”

To Top

1948 CJ-2A & 1949 CJ-3A Projects Leavenworth, WA

July 24, 2021 • CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

1: 1948 CJ-2A $2100:

2: 1949 CJ-3A $3400:

To Top

1949? CJ-2A? Covington, WA $5000

July 24, 2021 • CATEGORIES: CJ-2A, CJ-3A • TAGS: Bobcat, Fiberglass, Hardtop. This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $5000.

Lots of updates to this fiberglass bodied jeep. This has a Bobcat fiberglass hood and may well have a Bobcat body, too.

https://seattle.craigslist.org/skc/cto/d/kent-1949-willys-cj2a/7345982967.html

“1949 Willy’s CJ2A. Original frame and grill, fiberglass body. Has 6 point cage tied into frame with 3 beard suspension seats and 4 point harnesses. VERY rare Koenig Arctic top included. Needs to be sand blasted and repainted but no real cancer spots. Motor/trans: carbureted Chevy 327 with new plugs, wires, and alternator, dual electric fans, freshly rebuilt TH 350 mated to a Dana 18 T Case. Running gear: Dana 44 front (Detroit) and rear (spool) with 5.13 gears. Disc brakes all around with dual Wilwood master cylinders. Riding on Rubicon Express YJ leafs SOA with trac bar. 35×15 with tons of life left.

To Top

Year? CJ-3A Tacoma, WA $4750

July 13, 2021 • CATEGORIES: CJ-3A • TAGS: CJ2A-Truck, Diamond-Plating, Odd Body. This site contains affiliate links for which I may be compensated.

This jeep has been modified with a truck bed. It’s listed as a 1958, so maybe it was originally a DJ-3A or maybe it is a modified CJ-3B or CJ-5.

https://www.facebook.com/marketplace/item/197222075670198

“I am selling my one of a kind custom Willys Jeep. This Jeep has a CJ3A front end with a custom stepside Willys pickup style bed. It is powered by a Ford 302 v8 with a T150 three speed manual transmission. That is paired to a Dana 18 transfer case that puts power to a Dana 44 rear axle and a Dana 35 front axle. The Jeep has 33” tires with front locking hubs. Jeep runs, but needs a new battery and fuel, possible the carb cleaned. I’m asking $4750 or best offer.”

To Top

1950? CJ-2A? The Dalles, OR Auction

June 24, 2021 • CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

Blaine spotted this jeep up for auction. Bidding is at $2500. Listed as a 1950, it looks more like a CJ-2A to me.

https://auctionsalesco.hibid.com/catalog/280267/sunday-summer-2021-consignment-auction

“6V system, Needs breaks and battery Odometer Reads: 22977 VIN: 3J38407 Color: Yellow”

To Top

1952 CJ-3A Barstow, CA $7000

June 23, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(01/21/2021) Has some updates. It may have some rust, too (certainly at the driver’s step).

https://www.facebook.com/marketplace/item/415116223033896

“1952 cj3. Early 70s Buick oddfire v6 swap. Original running gear otherwise. New aluminum radiator, new tires, new battery, rebuilt transmission and transfer case, new carburetor, pertonix electronic ignition, new coil, new fuel pump, rebuilt steering gear. Needs minor body work. Set up to rock crawl or just enjoy a drive. Jeep is fully running and ready to go!”

To Top

1951 CJ-3A Dickinson, TX $3000

June 23, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No description provided. Lister isn’t the seller.

https://www.facebook.com/marketplace/item/966572847433327

“1951 Jeep Willy. I’m listing for the owner. PM me for the owners number.”

To Top

1952 CJ-3A? Las Vegas, NV $1500

June 23, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

It’s a project or parts. The body has rivets?

https://www.facebook.com/marketplace/item/151445143642246

“1952 CJ2a project. Jeep is set up for a small block Chevy. Currently it does not have an engine or transmission, however for another $500 I can provide one. Stock axels with the split windshield. Has cage bucket seats new headlight and tail lights spare tire mount. It is a clean tub and chassis to start a build with. No title, however does have VIN plate. Jeep is located in Las Vegas NV”

To Top

1953 CJ-3A Claremore, OK $3000

June 23, 2021 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

It’s a project.

https://www.facebook.com/marketplace/item/1367980540241525

“1953 Willys. 134 flathead engine. Was a project that we never finished. Tailgate, windshield, and second seat included. They were removed to begin restoration. Partially wired to 12 volt. Will need wiring. Sold as is with title”