Only the one pic.

https://sandiego.craigslist.org/ssd/cto/d/spring-valley-1953-jeep-willys/7003633480.html

“1953 Jeep Willys For Sale
Chevy motor and trans.
PS, OD, big breaks.
Price firm.”

Listed as a 1950 CJ-2A.

https://phoenix.craigslist.org/nph/cto/d/scottsdale-1950-jeep-willys-cj2a/7002479498.html

“350 Chevy Motor
350 Automatic Transmission
Headers
New seats and top, stored in garage.
Body has some rust.
Needs front transmission seal and carb. rebuild.
Was running when parked. Owned 12+ years.”

Based on the serial number, I’d say this is a 1950 Cj-3a, not a 1948 CJ-2A.

https://phoenix.craigslist.org/nph/cto/d/scottsdale-1948-jeep-willys-cj3a/7002469597.html

“Blue 1948 Jeep Willys CJ3A for sale!
We’ve owned this jeep for about 10 years. Not currently running. This would be a great project to take over!

2001 4.3 Chevy V6 with headers installed (electronics with motor, not hooked up).
SM420 transmission.
Transfer case adapter.
T18 transfer case.
Duel fuel tanks.
Duel rear mounted gas cans.
Body has very little rust.”

UPDATE: The consensus is that this is likely a 3A.

This has a governor cable.

https://www.facebook.com/marketplace/item/661328837718525/

“Selling all late 40’s to early 50’s Willy’s Jeep CJ3A parts we have on hand. 1949 Jeep Willy’s parts jeep (no title no motor) Radiator Gas Tank 1- Solex carburetor 1- Carter YF carburetor (4 cyl) 2- seats 6- 15″ Jeep rims (vintage) Transfer case Heater Lots of miscellaneous odds and ends $700 for everything”

Not sure how much value is here.

“good for. Someone that needs a project good title”

https://www.facebook.com/marketplace/item/560696964675736/

Lacks the frame-to-bumper gussets, so it could be a very late 2A or a 3A.

https://greatfalls.craigslist.org/for/d/fort-benton-willys-jeep/6993304652.html

“1949 Willys jeep in good shape runs and drives good. Seat dosent come with it. All tires hold air all original 3 speed with reverse high low tranfercase. Clean title. Would trade for a willys wagon”

Could be a good price. It runs, but no brakes.

https://cars.ksl.com/listing/5946817?ad_cid=4

“Selling my willys Jeep cj3a! Awesome little Jeep that is in pretty good shape!! Not nearly as rusty or beat up as most I looked at when
I was in the market! Almost all original. Running and driving. The original flat head 4cyl starts
Up and runs good, I haven’t even cleaned the original Carter carb! (Although I’m sure it could use a carb clean and a tune up after sitting for many years) the original gas tank is not rusted out like most. The engine does smoke a bit but is very strong, I think it could be old gas in tank or oil making it smoke. The transmission shifts great and stays in all the gears. Clutch works as it should. Jeep drives straight. Brakes do not work!
Really neat Jeep that would be fun to clean up, I just don’t have time with a few other Jeep projects going on.
No scams.
First come first serve”

UPDATE: **SOLD** Was $4000.

(09/02/2019) Springs have been reversed. Could be worth a closer look.

“1952 Jeep Willys CJ3A Flat Fender Project – new primed hood, tub, fenders, tailgate; partially boxed frame, roll cage, powered saginaw steering box, new 33×12.50 Cooper mud terrain tires plus new steel black wheels, Dana 20 transfer case with rebuild kit (torn apart to rebuild), GM SM 465 4-speed transmission with adapter kit to Dana 20 t-case (partially rebuilt), new GM bell-housing and new clutch kit, Dana 44’s front and rear, new CJ5 gas tank, new bimini top, and Painless wiring kit.
Title in hand.

Currently moving and do not have time to work on project anymore.”

UPDATE: **SOLD** Was $3000.

Has potential.

“1953 Willys CJ-3A Jeep- project condition.”

No pics provided.

https://losangeles.craigslist.org/sgv/pts/d/san-dimas-willy-jeep-cj-3-parts-car/6992287701.html

“Willy – Jeep Cj-3 Parts Car
1947 or so
Majority of vehicle present”

UPDATE: **SOLD** Was No Price.

This is located at Willys Works.

“Parting out a willys cj3a !!
Grille $150
Tub $250
Dana 44 rear axle $350
Dana 25 front axle $250
Frame $300
Transmission/ transfercase $550
Radiator $100
Starter $100
Generator $30
Wheels chrome spoke 15in $100
Roll bar $40
Jeep is located at willys works”

Only one pic included. No pic of the “spare” jeep.

https://rochester.craigslist.org/bar/d/farmington-willys-jeep/6985509747.html

“1949 Willy’s CJ3’s for sale, $7500. Run and drives. Price includes two complete Willy’s, a spare original all redone body and several new parts still in boxes. Price is firm, I hate saying that but I hate the guys who waste your time even more.”

It’s a project, but the engine runs.

https://seattle.craigslist.org/sno/cto/d/snohomish-1951-cj3a/6988605807.html

“I have a complete and all original 51 CJ3A project jeep. Perfect for a full restoration back to original, not to cut it up to make wheeler.

Yes I still have it.

I don’t have anymore pictures, so don’t ask. If you’re a serious buyer you’ll just come look at it.
Clean WA title in my name.

Been sitting inside shop for last few years.
Tub does have some rust.
Continue reading →

Looks like a nice rig.

https://cars.ksl.com/listing/5897760?ad_cid=15

“1952 Willy’s cj3a. Been in the family’s for over 40 years and has been a fun little toy. Body has recently been redone. Sitting on original running gear with a small block ford 260 v8 under the hood. 3 speed manual transmission with reverse and overdrive. 4×4 with manual hubs. Runs great drives great. It’s just time to let it go. Asking $8,500. Let me know if you have questions”

UPDATE: **SOLD** Was $5000.

(06/11/2019) Could be worth a look.

“Lots of extras , v6 , headers, extra set 2 1/2″ lift springs, 1/ 2 doors ,new top , spare , back seat ,new gas tank & exhaust , tow bar, 4spd stick , good little jeep”