Body Parts Research Archives

To Top

Flatfender Body Kit Bethlehem, CT **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE: **SOLD** Was $1100.

This is a hand made body advertised as a CJ-2A kit, but looking more like a MB/CJ-3a kit.

“What we have here is a complete body “kit” for a CJ2A or 3A. The tub was hand made by a guy in New Hampshire, THICK sheet metal, all custom welded, VERY solid, the fenders are again hand made in very thick steel, the hood, grille and windshield are all stock parts. All parts have some surface rust from sitting , but NO rot”

 
To Top

CJ-2A Tub Colorado Springs, Co $500

• CATEGORIES: Body Parts, CJ-2A

UPDATE:  Still Available

(12/03/2011) It’s been modified.

“I built this tub years ago for a rock crawler, and never finished it. Now the tub is sitting in my back yard rusting. It would make a killer rat rod, or finish it as a Jeep.

The entire floor has been replaced with 14 gauge diamond plate, and the rear has been moved up 6″ I have a windshield frame, grill, hood, a set of fenders, and a tail gate to go with it. The fenders are kind of beat, but the rest is great. Asking $500 for all of it, and will not separate! So far it has very minor rust, that’s only on the surface. I don’t have any pix in it’s current state, but can get some if you need them.

I do have all the paper work for a title on this one, so it can be street legal!”

http://cosprings.craigslist.org/pts/2754870556.html

 
To Top

CJ-3B Stainless Body Kits Myrtle Creek, OR

• CATEGORIES: Advertising & Brochures, Body Parts, CJ-3B, Features, stainless/jewels

UPDATE:  Back in May of 2011 Mike forwarded me the below ad.  This morning Craig pointed out that Dan over at Hemmings did a nice article about the stainless bodies along with the seller of these kits.

The buyer apparently bought out a stainless supplier in the Philippines. Call the seller for more info.

 
To Top

1946 CJ-2A Body Boring, OR **SOLD**

• CATEGORIES: Body Parts, CJ-2A

UPDATE: **SOLD** $150 … note the piece across the front of the rear wheel wells. I’ve seen similar installs on other jeeps. Unclear if this was an aftermarket piece or not.

“Cleaning out shop.
I bought this to get parts for another that I am rebuilding. This offering is for the tub/body only with good clear title, and it is probably only good for a mudder. There is no tailgate.
Please leave a contact number if replying to this ad due to all the spam.
Thanks
I will be posting other misc. stuff such as seats, grilles, radiators, gas tanks and windshields soon, as I have time to take pictures.
It can be seen at my work:
Alleycat Surplus
12255 SE 282nd. Ave.
Boring, Oregon 97009”

 
To Top

MB/GPW Fenders Mojave, Ca $50/per

• CATEGORIES: Body Parts

No pics provided.

“set of fenders for a mb/gpw 1941 to 1945 military jeep $50 each. will work on other flat render jeeps. also a cj3b hood $50”

http://inlandempire.craigslist.org/pts/2726056862.html

 
To Top

CJ-2A Body Cloverdale, CA **SOLD**

• CATEGORIES: Body Parts, CJ-2A

UPDATE: **SOLD** Was $350.

I can’t quite tell how good the condition of the body is.

“this is a clean tub with only surface rust no rot thanks frank”

 

 
To Top

Bobcat Fiberglass CJ-3B Body Eatonville, WA **SOLD**

• CATEGORIES: Body Parts, CJ-3B, Features • TAGS: , .

UPDATE: **SOLD** Was $2200.

This strikes me as a Bobcat body?  Whichever it is, it is rare.

“Willys Jeep high hood fiberglass body, hood & grill. Never used $2200.00 Call Tom 253-307-0374”

 
To Top

Fiberglass flattie body/hoods/grilles/fenders Puyallup, Wa $500

• CATEGORIES: Body Parts • TAGS: , .

oooh … the fiberglass hood shown is the same one I had on my first jeep. There have been only a few made.

“i got a fiberglass jeep tub, fenders, 2 hoods, 2 grills, a wind shield frame with cracked glass, and a cage. i stll have a rolling chassis but in rough shape and going to take to scrap if not interested.

please contact Brenden at 253-230-6846 call or text voice mail not set up, will respond asap to text

price is $500 or what i can get out of it”

http://seattle.craigslist.org/see/pts/2692902350.html

 
To Top

1953 CJ-3A Body/Frame Yamhill County, Or $650

• CATEGORIES: Body Parts, CJ-3A

There may be value here.

“I have a 1953 willys jeep I was gonna restore and other things have come up. It has some cancer and dents and still needs to be restored it’s all in pieces the parts I have for it include frame axles leaf springs pto winch tranny tub window frame wheels seat frames fenders and four boxes of misc. Interior parts like knobs gauges ect. This jeep has no title Would like to sell all at once but I will sell just parts text or call with any questions or for more photos 971-218-3212”

http://portland.craigslist.org/yam/cto/2579584879.html

 
To Top

Stainless Flattie Body Houston, Tx $3000

• CATEGORIES: Body Parts, stainless/jewels • TAGS: .

UPDATE: Still Available

“I have a 1949 willys jeep replica in stainless steel body brand new in box includes “tub doors fenders hood grill tailgate top rowbar lights dashboard” complete body. You are biding for the complete kit for more info plss contact me any time at 832 433 3512 thanx mark …”

http://houston.craigslist.org/cto/2579288211.html

 
To Top

Flatfender Body Knoxville, Tn **SOLD**

• CATEGORIES: Body Parts

Lots of pics on eBay.

“I have a new reproduction body that has been stored in a garage for 30 years,no rust. Includes: a good hood,solid with surface rust only windshield frame, one refurbished fender, grill,tailgate and original backseat. All in good condition. Good luck in your bidding! Call me at 865-966-9166 and leave a  message. 0 feedback bidders must call first before bidding or be blocked!!”

 
To Top

1947 CJ-2A Former long bed Body Wenatchee, Wa $100

• CATEGORIES: Body Parts, CJ-2A • TAGS: .

This is interesting.  This used to be an extended CJ-2A, but has been cut back down to a stock size.  The rollcage is only $50, which is a great price.

“Flat fender jeep body. Has the general rust under the passenger seat and drivers side. It was a rare long bed that in the 50’s I road in. But between then and when I bought it someone cut it down to a regular CJ2A size. the cut is just stitiched and needs finishing. Overall its not a basket case but will be a good project. I also have a roll bar that is custom for a 2A for $50 that is sitting on it and a windshield that needs the inner piece and a new panel across the front for $50. There are side diamond plate for the foot rest and along the side for $50 and some other 2A and 3A parts. I also have a complete project jeep for $1300. Body needs some work but for its age is better than most. You buy the project I will throw in the body listed above for any part it may need. I have L head motors that will need rebuilding for $300.”

http://spokane.craigslist.org/pts/2563910741.html

 
To Top

Free CJ-3B Tub Vista, Ca FREE

• CATEGORIES: Body Parts

UPDATE:  **SOLD** Was  Free

“FREE Willys Jeep CJ3B tub”



 
To Top

Parkette Body and Bobcat Hood (& more) Yakima, Wa **SOLD**

• CATEGORIES: Body Parts, Features, Racing, Roll Cage • TAGS: , .

UPDATE:  Last price was $1000. It sold.

The Parkette fiberglass body is an extreme rare, well made body.  One of the best things about this body is that a CJ-3A windshield will properly fit it, unlike the fiberglass Bobcat body.   During the 1970s, a friend of mine bought a Bobcat body, prepped it, and painted it.  When he stuck on the windshield he discovered the cowl was too flat to properly seat the windshield to the cowl.  To say he was angry was an understatement, because he felt he was mislead by the promises the manufacturer made.

So, after talking with the Parkette body manufacturer and getting assurances that the measurements were more accurate, he bought the body and has been happy about it ever since.

The body shownn below has had it’s rear wheel wells cut a bit.  It’s got a good looking rollcage that has been attached to the frame.  If this has been available when I was building biscuit, I would have started right here.

 
To Top

CJ-3B Body and Frame Pocola, Ok **SOLD**

• CATEGORIES: Body Parts, CJ-3B

UPDATE:  **SOLD** Was $250.

(07/13/2011) This looks like a fine price.

“Willys flat fender, cj3b “tall hood” body, frame, and rear axle only. Bought a few weeks ago to build up, but wife won’t leave me alone about it, so its for sale. Tub has some rust, front clip is good”

 
To Top

Stretched CJ-2A Body Garden Grove, CA **SOLD**

• CATEGORIES: Body Parts, CJ-2A • TAGS: .

UPDATE: **SOLD** Was $300.

It looks like this was stretched some time ago based on the rust.

“For sale is a Jeep CJ2A body that has been stretched to fit on a CJ7, Wrangler or Chevy Blazer frame. Come with vin tag. $300”

 

 
To Top

Flattie Parts West Cobb, Ga Free?

• CATEGORIES: Body Parts

No price listed.  They sound like they might be free.

“Original JEEP WILLYS parts – they belonged to my father who has pasted away.
I have 2 hoods, Fenders, entire windshiled frame, inner windshield and a tailgate
They are sitting in the garage taking up space, we would like them gone.”

http://atlanta.craigslist.org/atl/cto/2507712949.html

 
To Top

CJ-2A Back Seat Canton, Oh eBay

• CATEGORIES: Body Parts, Parts

Here’s a great looking seat.  The seller also has a NOS Chaff Screen for sale too.

“This is an almost like new seat that is the proper seat for a late CJ2A and will also fit the 3a and 3B. It shows little wear on the original upholstery and a few small scratches on the metal work. The vinyl is grey in color. You will need to figure out shipping but we would be more than happy to crate it for you. Local pick up would be preferred. eBay made me put a price in for shipping. I have no idea what it would cost to ship.”

View all the info on eBay

 
To Top

Fiberglass Flatfender Body Boscobel, Wi **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE:  Was $1500. **SOLD**

(10/05/2010) I’m not sure if this includes the front clip or not.

“1947 Willys fiberglass body for sale never been used: Make a mud bogger or use for restoration of Willys Jeep”

 
To Top

Replacement Flattie Tub? Gila Bend, Az $200

• CATEGORIES: Body Parts, CJ-2A, CJ-3A

This has the passenger side tool indents, but not battery box lid nor a tail gate.  I’m going to guess this is a replacement tub.

“I Have a willys jeep tub its in okay shape will need some work buts its worth what im asking for it. 200 OBO Will throw in the hood if bought for 200.00 Call,text or email at anytime (623)606-298six Thanks Pete”

http://phoenix.craigslist.org/wvl/pts/2444473925.html

 
To Top

1947 CJ-2A Wickenburg, AZ **SOLD**

• CATEGORIES: Body Parts, CJ-2A

UPDATE: Was $350. **SOLD**

It need some patching, but doesn’t appear too bad.

“1947 WILLYS JEEP tub.No title.Tub and windshield frame only. No other parts.”

 
To Top

MB Tub Mt. Shasta, Ca $550

• CATEGORIES: Body Parts, MB

This seller has other mb parts as well. Check out all the MB stuff here.

“WWII Willys MB Tub. No paperwork, No ID tag. Unmolested tub with all gages intact, handles and brackets. No seat frames, no gas tank.”

http://portland.craigslist.org/grg/pts/2425427893.html

 
To Top

Fiberglass Hood Flanders, NJ **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE: **SOLD** Was $100

(12/11/09) “Aftermarket Fiberglass Hood For Early Willys CJ2A or CJ3A. It would be fine for a M-38 also. Heavy duty late 60’s – early 70’s era manufacturing. Good condition, ready to paint and install. Put an end to rust problems with this fiberglass hood. $150.00. Too much? Please make an offer.”

fiberglass_hood_flanders

 
To Top

Willys Fenders and Parts Stockton, Ca $90

• CATEGORIES: Body Parts

Various parts.

“2 front fenders, muffler, bottom section of leaf spring, drive shaft and roll cage sections heavy gage stock. bob 209-601-3815”

http://stockton.craigslist.org/pts/2403771395.html

 
To Top

Willys Flattie Body and Fenders Granite Falls, Wa $300

• CATEGORIES: Body Parts

The fenders appear mb/gpw. If the body is military, it’s been cut in the rear and the steps modified (so it isn’t original as advertised).

“Selling my 40’s style willys jeep tub and fenders.. all original and straight.need alittle tlc but in great shape asking $300obo contact tj@ 1-425-367-1806 or 1-360-691-1396”

http://seattle.craigslist.org/sno/pts/2406826018.html