Body Parts Research Archives

To Top

2 CJ-2A Tubs and Other Parts Kittitas, WA $200

• CATEGORIES: Body Parts, CJ-2A

Both are a little rough.

“Two tubs; $200 each. Two fenders, one windshield and one hood and two grills; $50 each. $500 total if you buy all. Bring a strong friend and trailer or truck for hauling.”

https://yakima.craigslist.org/pts/6123358257.html

cj2a-tubs-kittitas-wa

 
To Top

1946 CJ-2A Body PartsSpokane, WA $1500

• CATEGORIES: Body Parts, CJ-2A

Initially, I thought this was a whole jeep.

“I have a CLEAN, proper title… No frame, great tub for restoration. Comes with a hood, two windshield frames, one decent drivers fender and a rough passenger side fender. One grill. Two tailgates.”

https://spokane.craigslist.org/cto/6115011808.html

1946-cj2a-parts-spokane-wash1 1946-cj2a-parts-spokane-wash2

 
To Top

CJ-2A Tub & Front Clips Peoria, AZ $450

• CATEGORIES: Body Parts, CJ-2A

Parts will need work.

“these are leftovers from a project. The tub has an excellent rear floor and inner fenders. the front floor have been patched at some point and could be used as they are, but really need repaired. the rear corners are pretty beat up, and the rest of the tub is very solid.

the hood is dented and has had a hole cut in it probably for a larger engine at some point.

the grill is not too bad and would clean up easily

one fender is excellent and the other is really poor condition”

https://phoenix.craigslist.org/wvl/pts/6111427737.html

1947-cj2a-body-peoria-az

 
To Top

1945 MB Body Roy, OH **SOLD**

• CATEGORIES: Body Parts

UPDATE: **SOLD** Was $1400.

Needs work.

“Willys MB body tub, fair+ condition. Has rust around fuel tank well and on some cross members. Also evidence of filler and fiberglass in a few places. Included but not installed a new fuel tank well and Y channel for underbody.”

1945-mb-body-troy-oh1

 
To Top

Fiberglass CJ-3B Bobcat Hood

• CATEGORIES: Body Parts • TAGS: .

This hood has Don Prine’s business card within the resin.

“Never used but has garage wear and tear. This was probably made in the 70’s judging be the phone number on business card. Fiberglass jeep hood for WILLYS cj3b, or if you cut it down it’ll fit a cj3a or cj2a.”

https://seattle.craigslist.org/tac/pts/6012377954.html

bobcat-cjb-hood0 bobcat-cjb-hood1 bobcat-cjb-hood2

 
To Top

1943 MB Body East Haddam, CT **SOLD**

• CATEGORIES: Body Parts, MB, Parts

UPDATE: **SOLD** Was $4999

(02/01/2017) Looks in good shape.

1943-mb-tub-easthaddam-ct

“Up for sale is what I believe to be a model year 1943 Willys MB jeep body.  I took it apart about 30 years ago as it was on a GPW Ford frame.  It is original and in excellent condition for a 70+ year old, mass produced combat vehicle for the government.  These were never made to be like a Porsche and had dents and scratches on delivery.  Please note there is a puncture hole above the airfilter mounting bracket at the transition to the cowl.  It looks like a small forklift fork hit it, but I don’t know. The rear floor (cargo area) was replaced when I got it.

Continue reading

 
To Top

CJ-2A Hood and Body Parts Cape Coral, FL **Status Unknown**

• CATEGORIES: Body Parts

UPDATE: Status Unknown. Was $150.

The hood looks in good shape.

“Hood, Body Parts, ……..”

cj2a-hood-bodyparts-fortmyers-fl

 
To Top

Fiberglass Body and Parts Jonesboro, AR **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE: **SOLD** Was $400.

Rob’s got the fiberglass body and parts for sale. Looks like a good price.

“For Sale – Fiberglass CJ2A body including fiberglass fenders. Also included are metal hood (with a hole cut in it), metal fenders left and right, metal grille, metal windshield frame, and a metal dash.”

fiberglass-body-jonesboro0 fiberglass-body-jonesboro1 fiberglass-body-jonesboro2 fiberglass-body-jonesboro3 fiberglass-body-jonesboro4

 
To Top

VEC CJ-2A Body Spring, TX **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE: **SOLD** Was $799.

(01/29/2017) Looks in good shape.

“I have an old Jeep Willys body for sale, don’t know much about it, it does have rust, figured it would make a cool rat rod like pictured or a great military looking re-build. Even perfect for a kids bed, many possibilities. No title,
Just is what you see in the pics, I have a friend that has a hood and grill that would probably work out depending on what your building. ”

cj2a-vec-body

 
To Top

Fiberglass Tub Fort Worth, TX **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE: **SOLD** Was $750.

Looks in great shape. Doesn’t look like it has ever been mounted. It appears to be a lightweight body similar to the racing body I used to have. But, mine worked great for jeeping, too.

“Found this fiberglass replacement body in my uncle’s barn while cleaning it out after he sold the ranch. He said he bought it for a ’43 Willys he was planning to restore (but clearly never did). I don’t know much about these but it seems in good shape – needs a fresh coat of paint, but there are no cracks or breaks that I can see. Body and hood only – no fenders.”

fiberglass-body-tx

 
To Top

1948 CJ-2A Tub Charlotte, NC **SOLD**

• CATEGORIES: Body Parts

UPDATE: **SOLD** Was $500

Maybe someone can save this?

“1948 CJ2A Tub, Fair condition but restore-able. ”

cj2a-tub-charlotte-nc

 
To Top

The Mystery Jeep Utility Body

• CATEGORIES: Body Parts, Features, Fire/Police/Industry Vehicles, Unusual

UPDATE: Ted got a hold of this a few years ago. No one seems to know who modified or for what purpose. Now he wants to let it go. If interested, email him at willysted@charter.net.

He wrote, “I was lucky enough to a be in the right place at the right time and have some interesting items to trade towards purchasing this really unique Willys body. Not really sure on origin or history on this oddball as it came from a buddy of mine who also didnt have much history on it, but I knew it was really cool and thought it would be the ultimate foundation for a great Yard -plow Jeep.

I thought it would be a great Jeep to have all your tools, torches, jacks, etc etc in to minimize walks back to the garage to get something while working on stuff out in the woods or yard. I was going to start with a good rolling and running 2a frame and make it mechanically sound and mount a Plow or Snow Scoop on front with a rear mounted PTO winch hoisting Boom on back of Jeep for a great little Utility Jeep.

Unfortunately my unfinished projects and Jeeps that need attention have got me forced to part with some of my future projects that Im never gonna have time for. This Body is very unique and definitely deserves to be restored and put to use somewhere. I think with a good rolling and running 2a or 3a frame and some work it would be a great Winter project for someone looking for a cool Willys build. My loss is going to be someones gain.

Make me an offer !!! Email any questions and I will try to help

Continue reading

 
To Top

MB/GPW Body Boise, ID $150

• CATEGORIES: Body Parts

Sides are rough according to seller.

“This is a world war II jeep tub. Good for parts or for a retro rockcrawler project. no data plates, no script, 1943 or 44.
tub sides are bondo. looks good in the picture but sides are rough. cowl is great. floor is rusty. This is a fab situation, not bolt on.
I will help you load this or deliver locally if necessary. i can’t help you if your wife gets mad. mine will be happy its found a new home.

folks always ask if I have other ww2 jeep parts. I have center parts of a cut frame (no front or rear), a front axle, hood that Is covered in bondo and that’s about it.

IF THIS AD IS UP, ITS AVAILABLE. Email me pls, that’s how I communicate best. don’t ask if its available. come look at it. ”

http://boise.craigslist.org/atq/5798302770.html

mb-body-boise-id

 
To Top

1942 GPW Body Kankakee, IL **Status Unknown**

• CATEGORIES: Body Parts, GPW (Ford MB)

UPDATE: **Status Unknown** Was $450.

Needs some work, but better than some I’ve seen.

“I have an early 1942 Ford script GPW tub for sale.
Tub is in overall good condition with a lot of work already done. Body is solid with no rust with a thin coat of body filler used to fill in dents on side and rear panels. Tool boxes just replaced, only needs floors replaced and it’s good to go! New side handles, pioneer tool brackets, glove box lid, tool box lids along with locks for all three lids.
No title, no data plates come with this tub, sold as is. ”

1942-gpw-body-kankakee-il1 1942-gpw-body-kankakee-il

 
To Top

CJ-2A Half Cab Pepin County, WI $300

• CATEGORIES: Body Parts • TAGS: .

UPDATE: Price dropped to $300.

(08/30/2016) It includes a sticker on the door, too.

“Half cab with doors off of a 1949 CJ2A Willys. All metal is solid but does have a few areas that have some surface rust. Doors are in decent shape on outside and the glass rolls up. The inner door panels will need to be replaced.”

http://minneapolis.craigslist.org/wsh/cto/5642436047.html

half-cab-cj2a-pepin-wi2 half-cab-cj2a-pepin-wi

 
To Top

1948 CJ-2A Body Fort Worth, TX **SOLD**

• CATEGORIES: Body Parts, CJ-2A

UPDATE: **SOLD** Was $200.

Looks like a good price.

“1948 CJ-2A Willys body tub. Straight and generally rust free. Typical rust in floor pans. ”

1948-cj2a-body-fortworth-tx

 
To Top

Fiberglass Tub Edinburg, PA **SOLD**

• CATEGORIES: Body Parts • TAGS: .

UPDATE: **SOLD** Was $500.

(01/19/2016) Needs some repairs. Looks like a lightweight glass body similar to my first jeep.

“I have and early Willys jeep fiberglass body with a one piece front end I am selling. It will need repaired on driver side and passenger side above the back of the doors asking 500 for it call or text ”

fiberglass-btub-edinburg-pa

fiberglass-body-clip

 
To Top

CJ-3B New Repro Tub Narvon, PA $2000

• CATEGORIES: Body Parts, CJ-3B, Features

Daryl’s got this tub for sale.

“We have a CJ3B new, reproduction body tub for sale. Regularly $2,400, currently $2,000 picked up in Narvon, PA. If shipped, $100 for crating plus motor freight to your location. This tub has the 5-hole dash.  Photos attached. If interested, email Daryl@DLBensinger.com or call 610-286-9545.”

cj3b-tub-pa3 cj3b-tub-pa2 cj3b-tub-pa1 cj3b-tub-pa4 cj3b-tub-pa5

 
To Top

Year? CJ-2A? Albuquerque, NM **Status Unknown**

• CATEGORIES: Body Parts

UPDATE: **Status Unknown** Was $150.

Might be worth a look at this price. Can’t tell if it is a 2A or 3A.

“I have a Jeep Willy’s tub that is in decent shape. I believe the tub is from 1955. It would make a perfect platform for a rat rod, rock crawler, or whatever else you can dream up”

tub-albuquerque-nm2

 
To Top

CJ-7 or Wrangler Fiberglass Body Old Brooklyn, OH $800

• CATEGORIES: Body Parts • TAGS: .

Looks like a strong body. Bob spotted this one.

“For sale is one fiberglass body tub that will fit a CJ7 or Wrangler (YJ) Jeep. Never been drilled or installed, has a few blemishes from being moved around. Cost $1650 when purchased, selling for half that price.”

http://cleveland.craigslist.org/pts/5435083107.html

fiberglass-tub-cleveland-oh1 fiberglass-tub-cleveland-oh2 fiberglass-tub-cleveland-oh3 fiberglass-tub-cleveland-oh4

 
To Top

CJ-2A Body Union, OR $500

• CATEGORIES: Body Parts

No pics provided.

“For sale as is one tub(body) for a Willy’s CJ-2A. Will take reasonable offer.”

http://eastoregon.craigslist.org/pts/5376357525.html

 

 
To Top

GPW New Repro Body Chickamauga, Ga $1950

• CATEGORIES: Body Parts, GPW (Ford MB)

Has a small dent on one side.

“This is a brand new reproduction body tub for the WWII Ford GPW. (G503). This is the mid-war or standard body. This is just the tub. There is a very small dent on the cowl and good sized one on the top edge of the left quarter. This is out of the original shipping crate and will NOT be shipped. This is a pick up item only. We have the means to load it in your truck or trailer. This is a one time deal only!!! NO trades, NO Holding, NO down payments, NO farm animals, Cash and Cary only. This item is on ebay as well and can be pulled at any time if it sells. This is sold as is. Please calls only NO Texts, 8 to 5 week days. Four two three seven six two five eight five eight. We are located at the south entrance of the Chickamauga battlefield. Quarter Ton Parts”

http://chattanooga.craigslist.org/ptd/5363185511.html

gpw-tub-chickamauga-tn

 
To Top

CJ-3B Body Chickamauga, GA $1970

• CATEGORIES: Body Parts, CJ-3B

Seller will not ship.

“This is a brand new reproduction body tub for the mid-1952 – 68 CJ3B and M606. This is the high hood jeep with the 134F overhead valve four cylinder motor. This is just the tub. Everything you see on it comes with it. This is included the floor pans. This is ready to scuff up paint and install. This will need the gauge holes cut as well as the floor pan holes for the clutch, brake and accelerator pedals. Remember there are several different configurations of dash and gauges for this model. This is out of the original shipping crate and will NOT be shipped. This is a pick up item only. We have the means to load it in your truck or trailer. This is a great deal. This is a one time deal only!!!!
NO trades, NO Holding, NO down payments, NO farm animals, Cash and Cary only. This item is on ebay as well and can be pulled at any time if it sells. This is sold as is. Please calls only no Texts 8 to 5 week days.”

http://chattanooga.craigslist.org/ptd/5322851882.html

cj3b-body-chickamauga-ga

 
To Top

Reproduction Tub Denver, CO $2000

• CATEGORIES: Body Parts

I suspect this has been sitting for many years. It’s a repro tub with civilian ribs on the floor, the M-38-like toll indents on the passenger side, and an MB/GPW dash glove box.

“CJ2A reproduction tub, complete floor plates, minor surface rust in one fender well never mounted has been in storage for several years, these are $2500 and up online”

http://denver.craigslist.org/pts/5268608782.html

repro-cj2a-tub0 repro-cj2a-tub1 repro-cj2a-tub2 repro-cj2a-tub3

 
To Top

1943 MB Tub Pollock Pines, CA **SOLD**

• CATEGORIES: Body Parts

UPDATE: **SOLD** Was $300.

Maybe someone can use this?

“1943 willy’s MB- TUB ONLY”

1943-mb-tub-sacramento-ca