Body Parts Research Archives

To Top

CJ-2A Body Spring Valley, CA **SOLD**

• CATEGORIES: Body Parts, CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $600.

It’s not perfect, but maybe someone can use this.

“1947 Willys CJ2A body tub, front fenders, hood and grille for sale. All has ratty-looking flaking white/blue paint, bondo, old fiberglass, surface rust, etc. but has been repaired structurally to be usable, or suitable for more restoration.

Tub floor and hat channels have been replaced but the lower sides need attention unless you want to go the Rat Jeep route. Front fenders are a little rough, but repaired and usable until you find better ones. Hood has had a hole repaired and is also usable. Grille is in good condition, but headlight buckets are missing. Will throw in remains of a later tailgate to complete the ratty set. All pieces but tailgate have matching “patina” as noted.

Asking $600 for the lot, mainly because of the hours in the tub floor. Have a couple equally ratty matching windshield frames for extra $.”

cj2a-body-sd-ca

 
To Top

Year? GPW Body Troutdale, OR $350

• CATEGORIES: Body Parts, GPW (Ford MB), Parts This site contains affiliate links for which I may be compensated.

Needs work.

“I have a willys body that needs work
I have been working on it and just decided to buy a new one don’t have the time to mess with repairing it
will come with extra parts to repair it”

https://portland.craigslist.org/mlt/pts/d/gpw-willys-jeep-body/6372573098.html

gpw-body-troutdale-or

 
To Top

M-38A1 Body Houston, TX **SOLD**

• CATEGORIES: Body Parts, M-38A1 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $750.

Appears in good shape.

“M38A1 Jeep Body. Approximately 1953-1955. Tub with front fenders, grille, and hood. Also includes floor parts Mand most of the wiring harness. Small amount of rust on the body, generally in good condition. $750.00 cash only”

m38a1-body-parts-houston-tx

 
To Top

CJ-2A Tub St. Louis, MO $200

• CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.

Maybe someone can use?

“$200.00 obo for rat rod or ? has rust to clean up. Tub only.”

https://stlouis.craigslist.org/pts/d/1948-jeep-tub-for-rat-rod/6362575942.html

1948-cj2a-tub-mo

 
To Top

1942 MB Body Anderson, SC **SOLD**

• CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was No Price.

Appears to have some rust.

“1942 Willys Jeep body. Includes tub, window frame, fenders and hood. I was going to use it for a project but decided to go another direction”

1942-mb-body-anderson

 
To Top

1963 CJ-3B Tub Keizer, OR $250

• CATEGORIES: Body Parts, CJ-3B This site contains affiliate links for which I may be compensated.

Should be good for someone.

“NEED GONE! GOOD FOR PROJECT! Come and take a look.
63 Willy’s cj3b tub for sale”

https://salem.craigslist.org/wto/d/willys-tub-high-rise-hood/6342810431.html

cj3b-tub-salem-or

 
To Top

CJ-3B Body Rathdrum, ID **SOLD**

• CATEGORIES: Body Parts, CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $600.

(03/30/2017) Interesting story. The 3B hood with the louvres is unusual.

“I purchased this to turn into my dream FrankenWillys, stretched to allow 3 rows of seats. When I called the Idaho DOT, everything went well until I said “stretch”. Apparently that makes it a new vehicle, that would need to meet current safety standards (airbags, etc.). So I set my dream aside and bought a CJ8 as a compromise. I need to get the CJ3 out of the garage, so I can get the CJ8 fixed up.

Most of the CJ3 B body has been sandblasted. If it is gray in the picture, it is likely sandblasted. The floor has rust, see pictures, but overall it is in good condition for an old Willys. Comes with Koenig steel top. The top comes with a set of full doors. There is also a set of half doors. There is a spare firewall to replace the original firewall that was cut out for a V8.”

cj3b-body-rathdrum-id2 cj3b-body-rathdrum-id3 cj3b-body-rathdrum-id4

 
To Top

Custom Aqualu Aluminum Body Houston, TX **SOLD**

• CATEGORIES: Body Parts, Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6500.

Well this is interesting. That body might fit nicely on a post 1972 stock CJ-5 Frame.

“Custom Aqualu CJ2A Body
– Tub – 4″ wider and 6″ longer than stock, 3″ of length added to door area, 3″ of length added to rear wheel area
– Grill – 4″ wider than stock
– Hood – 4″ wider, 3″ longer than stock
– Windshield Frame – 4″ wider than stock
– Front Fenders – 3″ longer than stock
– Storage Tailgate – 4″ wider than stock
Custom CJ2A frame
– 139″ long (end to end including bumpers)
– 29.5″ between rails
– Rear section (including angled taper into center section) – 40″ long
– Front section (including angled taper into center section) – 38.5″ long
– Front and rear sections are 2x4x0.188″ wall rectangle tube, center section is 2x6x0.188″ wall rectangle tube
– Setup for leafs with the frame side plates, but those could easily be cut off for links (that was my ultimate plan)

The body package was over $9k from Aqualu.

$6500 OBO
$8500 OBO with Jeep TJ Rubicon Axles and Heim Joints for Suspension”

custom-aqualu-aluminum-body3

custom-aqualu-aluminum-body1 custom-aqualu-aluminum-body2 custom-aqualu-aluminum-body4

 
To Top

GPW Tubs Lodi, CA $900

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

No title tub for sale.

https://sacramento.craigslist.org/pts/d/willys-mb-ford-gpw-tub-body/6655434340.html

gpw-tub

“I no longer need this tub, so needless to say, here it is for sale. It’s an original 1945 ACM2 tub, which was used on late 1944 through 1945 Ford GPWs and Willys MB WW2 Jeeps. And based on the drilled holes on the floor, this was used for a radio-equipped Jeep.

A previous owner had it sandblasted and it sat outside after that. The brown coating you see is surface rust. The body needs some repairs on the floor, but I have to say . . . it’s extremely straight! The reproduction footrests and shipping plate are not included. The tub is located in Lodi, CA. Local pickup is preferred.

Note: There is no title with this tub. It never came with one and rightfully so. At least in California, a VIN is based on a vehicle’s frame and this is obviously a tub.”

 
To Top

CJ-3A Body Parts and Rebuilt Chassis Uvalde, CA

• CATEGORIES: Body Parts, CJ-3A This site contains affiliate links for which I may be compensated.

No pics of the chassis. The tub/fenders/hood are $800 together.

“1950 JEEP TUB AND FENDERS AND HOODS FOR SALE
ALL $800
HOODS $100 EACH
FRONT FENDERS $50 EACH
TUB IN VERY GOOD SHAPE $600
ALSO HAVE CHASSIS WITH REBUILT ENGINE TRANS AND TRANSFER CASE
WITH REBUILT DIFFS, NEW BRAKES, TIRES ALL FRESH PAINT $3000.
ALL YOU NEED IS A GRILL RADIATOR AND WIRING AND YOU HAVE A COMPLETE JEEP”

https://sanantonio.craigslist.org/pts/6121606677.html

cj3a-hood-uvalde-tx

 
To Top

2 CJ-2A Tubs and Other Parts Kittitas, WA $200

• CATEGORIES: Body Parts, CJ-2A This site contains affiliate links for which I may be compensated.

Both are a little rough.

“Two tubs; $200 each. Two fenders, one windshield and one hood and two grills; $50 each. $500 total if you buy all. Bring a strong friend and trailer or truck for hauling.”

https://yakima.craigslist.org/pts/6123358257.html

cj2a-tubs-kittitas-wa

 
To Top

1946 CJ-2A Body PartsSpokane, WA $1500

• CATEGORIES: Body Parts, CJ-2A This site contains affiliate links for which I may be compensated.

Initially, I thought this was a whole jeep.

“I have a CLEAN, proper title… No frame, great tub for restoration. Comes with a hood, two windshield frames, one decent drivers fender and a rough passenger side fender. One grill. Two tailgates.”

https://spokane.craigslist.org/cto/6115011808.html

1946-cj2a-parts-spokane-wash1 1946-cj2a-parts-spokane-wash2

 
To Top

CJ-2A Tub & Front Clips Peoria, AZ **SOLD**

• CATEGORIES: Body Parts, CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $450.

Parts will need work.

“these are leftovers from a project. The tub has an excellent rear floor and inner fenders. the front floor have been patched at some point and could be used as they are, but really need repaired. the rear corners are pretty beat up, and the rest of the tub is very solid.

the hood is dented and has had a hole cut in it probably for a larger engine at some point.

the grill is not too bad and would clean up easily

one fender is excellent and the other is really poor condition”

1947-cj2a-body-peoria-az

 
To Top

1945 MB Body Roy, OH **SOLD**

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1400.

Needs work.

“Willys MB body tub, fair+ condition. Has rust around fuel tank well and on some cross members. Also evidence of filler and fiberglass in a few places. Included but not installed a new fuel tank well and Y channel for underbody.”

1945-mb-body-troy-oh1

 
To Top

Fiberglass CJ-3B Bobcat Hood

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD**

This hood has Don Prine’s business card within the resin.

“Never used but has garage wear and tear. This was probably made in the 70’s judging be the phone number on business card. Fiberglass jeep hood for WILLYS cj3b, or if you cut it down it’ll fit a cj3a or cj2a.”

bobcat-cjb-hood0 bobcat-cjb-hood1 bobcat-cjb-hood2

 
To Top

1943 MB Body East Haddam, CT **SOLD**

• CATEGORIES: Body Parts, MB, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4999

(02/01/2017) Looks in good shape.

1943-mb-tub-easthaddam-ct

“Up for sale is what I believe to be a model year 1943 Willys MB jeep body.  I took it apart about 30 years ago as it was on a GPW Ford frame.  It is original and in excellent condition for a 70+ year old, mass produced combat vehicle for the government.  These were never made to be like a Porsche and had dents and scratches on delivery.  Please note there is a puncture hole above the airfilter mounting bracket at the transition to the cowl.  It looks like a small forklift fork hit it, but I don’t know. The rear floor (cargo area) was replaced when I got it.

Continue reading

 
To Top

CJ-2A Hood and Body Parts Cape Coral, FL **Status Unknown**

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was $150.

The hood looks in good shape.

“Hood, Body Parts, ……..”

cj2a-hood-bodyparts-fortmyers-fl

 
To Top

Fiberglass Body and Parts Jonesboro, AR **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $400.

Rob’s got the fiberglass body and parts for sale. Looks like a good price.

“For Sale – Fiberglass CJ2A body including fiberglass fenders. Also included are metal hood (with a hole cut in it), metal fenders left and right, metal grille, metal windshield frame, and a metal dash.”

fiberglass-body-jonesboro0 fiberglass-body-jonesboro1 fiberglass-body-jonesboro2 fiberglass-body-jonesboro3 fiberglass-body-jonesboro4

 
To Top

VEC CJ-2A Body Spring, TX **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $799.

(01/29/2017) Looks in good shape.

“I have an old Jeep Willys body for sale, don’t know much about it, it does have rust, figured it would make a cool rat rod like pictured or a great military looking re-build. Even perfect for a kids bed, many possibilities. No title,
Just is what you see in the pics, I have a friend that has a hood and grill that would probably work out depending on what your building. ”

cj2a-vec-body

 
To Top

Fiberglass Tub Fort Worth, TX **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $750.

Looks in great shape. Doesn’t look like it has ever been mounted. It appears to be a lightweight body similar to the racing body I used to have. But, mine worked great for jeeping, too.

“Found this fiberglass replacement body in my uncle’s barn while cleaning it out after he sold the ranch. He said he bought it for a ’43 Willys he was planning to restore (but clearly never did). I don’t know much about these but it seems in good shape – needs a fresh coat of paint, but there are no cracks or breaks that I can see. Body and hood only – no fenders.”

fiberglass-body-tx

 
To Top

1948 CJ-2A Tub Charlotte, NC **SOLD**

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500

Maybe someone can save this?

“1948 CJ2A Tub, Fair condition but restore-able. ”

cj2a-tub-charlotte-nc

 
To Top

The Mystery Jeep Utility Body

• CATEGORIES: Body Parts, Features, Fire/Police/Industry Vehicles, Unusual This site contains affiliate links for which I may be compensated.

UPDATE: Ted got a hold of this a few years ago. No one seems to know who modified or for what purpose. Now he wants to let it go. If interested, email him at willysted@charter.net.

He wrote, “I was lucky enough to a be in the right place at the right time and have some interesting items to trade towards purchasing this really unique Willys body. Not really sure on origin or history on this oddball as it came from a buddy of mine who also didnt have much history on it, but I knew it was really cool and thought it would be the ultimate foundation for a great Yard -plow Jeep.

I thought it would be a great Jeep to have all your tools, torches, jacks, etc etc in to minimize walks back to the garage to get something while working on stuff out in the woods or yard. I was going to start with a good rolling and running 2a frame and make it mechanically sound and mount a Plow or Snow Scoop on front with a rear mounted PTO winch hoisting Boom on back of Jeep for a great little Utility Jeep.

Unfortunately my unfinished projects and Jeeps that need attention have got me forced to part with some of my future projects that Im never gonna have time for. This Body is very unique and definitely deserves to be restored and put to use somewhere. I think with a good rolling and running 2a or 3a frame and some work it would be a great Winter project for someone looking for a cool Willys build. My loss is going to be someones gain.

Make me an offer !!! Email any questions and I will try to help

Continue reading

 
To Top

MB/GPW Body Boise, ID $150

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

Sides are rough according to seller.

“This is a world war II jeep tub. Good for parts or for a retro rockcrawler project. no data plates, no script, 1943 or 44.
tub sides are bondo. looks good in the picture but sides are rough. cowl is great. floor is rusty. This is a fab situation, not bolt on.
I will help you load this or deliver locally if necessary. i can’t help you if your wife gets mad. mine will be happy its found a new home.

folks always ask if I have other ww2 jeep parts. I have center parts of a cut frame (no front or rear), a front axle, hood that Is covered in bondo and that’s about it.

IF THIS AD IS UP, ITS AVAILABLE. Email me pls, that’s how I communicate best. don’t ask if its available. come look at it. ”

http://boise.craigslist.org/atq/5798302770.html

mb-body-boise-id

 
To Top

1942 GPW Body Kankakee, IL **Status Unknown**

• CATEGORIES: Body Parts, GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **Status Unknown** Was $450.

Needs some work, but better than some I’ve seen.

“I have an early 1942 Ford script GPW tub for sale.
Tub is in overall good condition with a lot of work already done. Body is solid with no rust with a thin coat of body filler used to fill in dents on side and rear panels. Tool boxes just replaced, only needs floors replaced and it’s good to go! New side handles, pioneer tool brackets, glove box lid, tool box lids along with locks for all three lids.
No title, no data plates come with this tub, sold as is. ”

1942-gpw-body-kankakee-il1 1942-gpw-body-kankakee-il

 
To Top

CJ-2A Half Cab Pepin County, WI $300

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $300.

(08/30/2016) It includes a sticker on the door, too.

“Half cab with doors off of a 1949 CJ2A Willys. All metal is solid but does have a few areas that have some surface rust. Doors are in decent shape on outside and the glass rolls up. The inner door panels will need to be replaced.”

http://minneapolis.craigslist.org/wsh/cto/5642436047.html

half-cab-cj2a-pepin-wi2 half-cab-cj2a-pepin-wi