emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: Price dropped to $6500.
(08/19/2022) This seems worth a look.
https://maine.craigslist.org/cto/d/brunswick-1948-willys-cj2a/7522346867.html
“Recent rubber, new battery, spare tire, 12-volt conversion, draw bar, back seat, two heaters, title, runs, drives and stops.
FWD & low range engage as they should. Time for it to go to a new home as not enough time to bring it to the next level.”
The passenger side has some rust. I can’t tell if it is surface or deep.
https://www.facebook.com/marketplace/item/1010565492978665
“1951 Jeep CJ-2A VIN: 451GB122992 Clean Title Flat Head-4, 3 Speed Runs, shifts, 4×4 also New brake lines installed. Frame only shows surface rust. All new wheel cylinders & brake pads replaced except rear driver side (for the life of me couldn’t get the drum off), all new preformed brake lines, rebuilt master cylinder, rebuilt carb, all fluids replaced including differentials, new hub bearings, headlights high and low, but no turn signals or brake lights. I put new taillights on as well but they have to be wired up, as well as a new turn signal stalk that’ll have to be wired up. Cleaned out and repainted the fuel tank, also installed a tach.”
Hasn’t run in years. It’s an older rebuild.
https://www.facebook.com/marketplace/item/755236139031733
“1946 CJ 2A Jeep, V-8 Chevrolet motor, new brakes and rebuilt transmission. Seats need redoing, has not run for 30 years.”
This will need work. Body has been patched in several places, including floors.
https://www.facebook.com/marketplace/item/851111692538814
“Complete Willys ran when parked, motor spins,extra parts.”
UPDATE: Still Available.
(08/17/2022) It has an f-head and a few other updates.
https://www.facebook.com/marketplace/107384699291109
“If it’s listed then it’s still available!! What I have here is a 1946 Willys CJ2A. Have title. It runs and drives and even stops. 4 wheel drive works. I did not cut the hole in the hood for the air cleaner. That’s the way I got it and that’s the way you are going to get it. I was told that it has a newer Jeep motor and it sits higher. That’s why The hole was cut in the hood for the air cleaner. Located in Howell NJ. If you figure out shipping then I will help load it”
UPDATE: Now Priced at $6200
(11/18/2021) It looks like there have been some repairs to the driver’s side. No title.
https://www.facebook.com/marketplace/item/1512337672519326
“1947 Willys CJ-2A converted into a 12 Volt with a 3 speed T90 transmission. Runs well, has 4×4, tires in great condition. New carburetor and brakes (brakes need to be tweaked) Price includes couple hundred bucks in parts. My son and I bought the Jeep with the intent of restoring it, but he’s joined the service. ”
Has the Kubota engine update.
https://www.facebook.com/marketplace/item/437304568360017
“‘47 Willys CJ2A with a Kubota v2203 turbo diesel engine swap. I used an Overland diesel swap kit. http://overlanddiesel.com/ It has the stock 3 speed T-90 transmission and Dana 18 transfer case, front lock right locker with locking hubs and an open rear end. Front disc brakes. Everything works and it works well on the roads. You could drive it home but the gears limit top speed. I have a ton of spare parts that will go with it for the right price.”
UPDATE: Price dropped to $4500.
(08/26/2022) It probably needs some brake work.
https://www.facebook.com/marketplace/item/2041836829343324
“1948 jeep cj2a v6 New carburetor, New aluminum radiator.don’t know what engine it is runs great good clutch and Tran stops slowly fresh oil change needs”
UPDATE: Still Available.
(07/17/2022) No description provided and only one pic.
https://www.facebook.com/marketplace/item/1053383198929938
UPDATE: Still Available.
(06/24/2022) Doesn’t run. Pics aren’t the most useful.
https://www.facebook.com/marketplace/item/710557843499008
“1946 Jeep cj2a Story that came with it this was “The hunting Jeep. Had an engine swap late 70’s early 80’s. Said to have a 350 v8 from a late 60’s early 70’s corvette that had been in a wreck.” Firewall is not cut out.. Very solid.. Little rust.. Engine will need overhauled.. Transmission shifts into gears. Jeep is very much a project. Does not run. Does not drive. Top and doors need reupholstered but frame work is there. Has removable center seat! Needs a new windshield frame and front hubs. This was a running driving unit before it sat in a field for years after original owner/builder passed away. Great start for restoration, needs to go to someone that’ll get to it sooner then I will hate to see it sitting. Trade for aluminum boat or 1962-1973 Ford Truck.”
Looks ready for some exploring.
https://www.facebook.com/marketplace/item/348487707357933
“Vortec v6, new tires new rims, disk brake conversion up front, transmission tranfer case all new rebuilt ,power steering ,custom aluminum radiador too many things to list must see in person”
Appears solid.
https://www.facebook.com/marketplace/item/1000854287283837
“1948 Willy’s CJ2A Flat head 4 “Go-Devil” engine. Starts and runs great. Many of the gaskets replaced. 3 speed manual Trans. 4wd comes with additional Transmission and transfer case coupled with Warner automatic over drive.”
It’s missing the front frame rails, but still may be worth look. No description provided.
https://www.facebook.com/marketplace/item/573056457847634
Seems worth a look.
https://www.facebook.com/marketplace/item/410717061051564
“47 Willey’s tub. Has fenders . Tub is rough. 500 but make me offer. Need cash”
Taar’s selling her father’s CJ-2A. It’s seen some repairs and doesn’t run at the moment. Unclear if the engine spins or not. You can email her at tara.dicken21 @ gmail.com (remove spaces around the @).
“My father recently passed away and left me with several vehicles I am now trying to find homes for. One if these is a 1946 jeep cj3a with a title. It’s not in good shape at all as it has been outside in a barn. Would love for it to go to a good home.”
Glenn spotted this rare and restored Mahl Loader and CJ-2A. There are a ton of detail photos at BaT’s auction page. Note that the serial number used for the title is an engine number and not the original serial number. So, a buyer might want to consider that it your state is extra picky.
https://bringatrailer.com/listing/1948-willys-cj-2a-18/
“This 1948 Willys CJ-2A is powered by a 134ci Go-Devil inline-four paired with a three-speed manual transmission and is fitted with a MAHL Jeep Loader attachment produced by Standard Iron & Wire Works Inc. of Minneapolis, Minnesota. The pair was acquired by the seller around 2010 and subsequently refurbished before installation of the loader in 2016. The truck is finished in black over green vinyl and features white-painted 16″ steel wheels, a fold-flat windshield, a dual-range transfer case, a power take-off unit, a Gre-Sen hydraulic pump, and cab-mounted hydraulic controls. This CJ-2A and Jeep Loader are now offered with an award, articles about the project, and a clean Minnesota title in the name of the seller’s company…..
The factory chassis tag has been replaced with a reproduction unit that shows a blank serial number, and the seller is unable to locate the chassis number on the vehicle itself. The last six digits of the VIN on the title—J172095—are consistent with that of a 1948 Willys CJ-2A.”
Here is a video:
More info on the Mahl Loader from the CJ-2A page: https://www.thecj2apage.com/forums/topic19682_post526669.html#526669
Here’s an article from the Dispatcher Magazine with more info from the auction:
And here are pics:
Here’s an unusual custom cab for sale spotted by Andy.
https://www.facebook.com/marketplace/item/609039380576173
“I have a 1946 Jeep cab $500. Need gone asap. You haul.”
Everything for $800. It looks to be one chassis and two CJ-2As?
https://www.facebook.com/marketplace/item/528134015665772
“Lots of willys Jeeps parts. 1 mostly complete jeep with broken suspension mounts on the front. The motor on it has ran on starting fluid. Body on it is solid just need frame fixed. Also pictured is another jeep body and frame. The frame has the transmission and transfer case but no motor. The second body is pretty rusted out but is salvageable. Have a box of miscellaneous Jeep parts that will come with the body’s. 800 come get it all. Located in North Mississippi.”
Listed as a 1947 CJ-2A, the body appears to be from a 3A, as it lacks the ignition switch hole on the dash. It also lacks frame horns on the front frame rails.
https://www.facebook.com/marketplace/item/813594109643512
“1947 Willys CJ2A. Starts, runs, drives, doesn’t stop real well. New master cylinder included. Engine; L4-134 “Go-Devil” Transmission; T-90 Transfer case; Dana 18 Front differential; Dana 25 Rear differential; Dana 41 I have upgraded to 12 volts. New alternator, New battery, new battery cables, new fan belt. I have gotten the title lined out in my name. With new reproduction Serial number plate, new reproduction body and frame tags and a new reproduction dash plate. Also has new in box steering linkage. Will need the wiring played with, lights, ignition switch and such. I have a video of it running on request”
This is listed as a 1949, but is a 1948 based on the serial number. Unclear how much value is here, but it does have a Sears/Allstate-branded deluxe top.
https://www.facebook.com/marketplace/item/1118204418790044
“1949 Willy’s Jeep CJA. Flathead 4 cylinder motor. It has been sitting but the motor moves freely. It’s all there, transmission, radiator, carburator. Would consider trade. DM any questions”
This is probably a 2A with some odd mods. Unclear what value is here.
https://www.facebook.com/marketplace/item/379484094337220
“Whole ruff jeep with extra motor and transfer case and axle it will bring close to this for junk”
Chris shared this PTO and rear gear box equipped CJ-2A.
https://www.facebook.com/marketplace/item/842319056700472
“Any message asking me if it’s available we’ll be deleted. Barn fresh 1946 Willys Jeep CJ-2A. It needs body work. Engine not stuck. I have been adding automatic transmission fluid to the cylinders over the last 6 months. The vehicle is 95% complete. Also has very rare PTO option in rear. I do have the windshield. An excellent project. $2,500 or best offer”
This customized CJ-2A was stolen.
https://www.facebook.com/marketplace/item/4666410326795020/
“STOLEN VEHICLE! Please keep an eye out for this Willy’s Jeep. It was stolen from my father-in-law’s property in Mound House, NV. It has been reported to the local authorities.”
UPDATE: **SOLD** Was $25,000.
This looks nice, though neither the windshield nor the body have been restored to original. The transmission shifter is on the floor, rather than the column.
“Looking to sell my cj2a 1945 Willys sn-601. 3606 miles from frame off restoration. 500 miles from new paint to 1945 color sheme. I have a binder of the details, spare tire mounted on extra tailgate, green canvas top, shop manual and assorted jeep stuff/parts that goes with it. It is great! Just looking for a new project to nerd out on. NADA has it between 26k and 43k. An offer between that and I’ll sell it. Located 19947. Meeting location will be at the Harbeson Royal Farms. Cash or Certified Check. I’ll remove listing once sold. Added more pics Friday night. Captured a video of it running. PM me and I’ll send it to you.”
