UPDATE: **SOLD** Was $2000.

The body is pretty rusted. The engine compartment and engine looks in good shape. I’m not sure how much value is here.

“I’m ready to sell my 1947 cj2a now. I did a post a couple months ago to see about what it was worth, just so no one thinks it’s a scam, due to using the same pictures. Don’t know much about it. The guy that I got it from wanted to buy it back a year and a half or so ago for $2,150 but I didn’t want to sell it. I was going to use it as a bar/focal piece in my man cave. But I’m moving out of state now and just looking to sell. I’m not a mechanic so I can’t really tell you anything about it. I have the title. Located in sykesville Maryland. Asking $2,000 or best offer”

This is a project.

https://www.facebook.com/marketplace/item/1093667235043692/

“This is a project that I’ve started and haven’t finished I’ve got a V6 that’s been checked out with new gaskets and gone through new rebuilt transmission automatic rebuilt transfer case and the adapter for the transfer case and transmission needs a lot more work, but will be really sweet when it’s done all body parts are there”

UPDATE: Price dropped to $2500.

(05/07/2024) Parts jeep or project.

https://www.facebook.com/marketplace/item/339012795654054

“1946 CJ2A. This jeep has been sitting in a shed for close to 30 years. Has some kind of a 4cylinder Chevy engine in it. But it’s not mounted. Transmission has Chevy adapter installed and is mounted to the engine. someone was trying to install a power steering rack in it but it doesn’t look safe and will need to be replaced. The jeep is in overall good condition. It’s straight has minimal rust, minus the rot in the storage compartment under the passenger seat. There is NO PAPERWORK, NO ID TAGS NO LICENSE PLATE seats and fuel tank are gone as well. sold as parts jeep only. Tires hold air but are 30+ years old. I’m throwing in A spare tire with stock rim, two L134 Willy’s jeep engines (both buildable) one has a 2wd transmission bolted to it incase you wanted to build some kinda 2wd rat rod jeep..?”

This looks pretty solid. I expect it has an f-head.

https://www.facebook.com/marketplace/item/1548750649009309

“1948 Willy’s. Great shape for 76 years old. New tires and correct rims. Just rebuilt the shift tower with new springs and bearings. Runs and drives great. Extra windshield glass from Kiser Willy’s. Cash only and local pickup only. I do not need any help selling this. Call Rex at 208-8six1- 4five5six.”

UPDATE: Price drops to $8700.

(05/18/2024) Solid, mostly original CJ-2A.

https://www.facebook.com/marketplace/item/2695146160666071

“All original 1947 Willy’s Jeep, drives and runs great!! $9500! OBO”

it appears the includes an overdrive.

https://www.facebook.com/marketplace/item/787448420199762/

“46 Willy’s 327 SBC, manual gear box with twin stick transfer case. Also PTO. New leaf springs. 35/12.5/20 tires on 20/12 wheels. Also have a smaller set of tires if ya don’t want the bigger set. Soft top with 2 extra doors. Bikini top also which might be brand new.”

Looks like a solid jeep, though it has some kind of starting issue.

https://www.facebook.com/marketplace/item/1017621393123235

“1946 CJ-2A Willys Jeep all original other than electrical has been updated to 12v and wheels replaced engine and transmission in good shape has a fuel system problem but will start and drive around issue is probably just user error”

This appears to be built atop a later frame (and chassis?).

https://www.facebook.com/marketplace/item/1165160044525922

“1946/48 Willy’s Cj2A 225 Dauntless V6 disk front brakes new tires new soft top new seats new paint new dash and gauges some of the gauges need wiring hydraulic clutch”

Ted’s got this 2A for sale.

https://www.facebook.com/groups/837017479769475

“For sale is a 1947 Willys CJ2A,
Serial number 105348
The bad , body pretty rough but I’ve certainly seen much worse , motor bad I’m assuming as the previous owner pulled the plugs and then neglected to put ‘em back. I’m gonna mess with the motor and see if I can get it turning over. They most always will run if they turn over and have compression. But for all intents and purposes and purposes I’d say this one will need a rebuild.
The good , jeep has a very respectable frame under it somehow (see pics). Very nice frame with hat channels still intact and frame rails look pretty good
Jeep has what looks to be an early Newgren Three Point Hitch assembly on it
After doing some research and talking with some buddies that know more about the newgrens than I do it seems this one is early judging by the belt driven pump , and engine bay reservoir , control valve between seats. Ram is present and looks decent , it didn’t have adjusters and lift arms when I got it but have since made some for another Newgren I have and will include a very nice set of lift arm adjusters and Arms made better if anything than the originals as a lot of the Newgren stuff was pretty crude right from the get go.
Jeep also has a nice original Scheneker plow setup on it and blade included
Great candidate for a frame up restoration with motor rebuild or refurbish the Newgren for another jeep and start with the rolling frame.
I have other Willys PTO equipment to turn this one into a farm Jeep if desired for additional cost
I’m valuing the jeep at about what The Three point hitch assemblies have been bringing, with a good rolling frame , plow setup etc as I just sold a large collection of them
I can send additional pics if needed and I have another good hood to go with it as this one is shot
No title but will include a state of CT Bill of Sale etc
Located in Storrs CT
PM me for more info or to come get it , too many projects going
$3500
860 428 3265”

Sounds like a project.

https://www.facebook.com/marketplace/item/908928214578498

“1948 CJ2A 4 cylinder Have all the wiring for conversion to 12 volt system. New gages come with. Will have to be trailered away.”

No description provided. It is a project.

https://www.facebook.com/marketplace/item/609096671410552

“1948 Jeep Cj2a · Convertible”

UPDATE: Price bumped to $2400.

“05/24/2024” Looks like there is some parts value here.

https://www.facebook.com/marketplace/item/423586823952841

“1947 Willy’s jeep cj2a. I bought this already disassembled to restore but my new knees are not going to let me do the work for awhile. original 4-cylinder flat head, 2b windshield, usual rust in floor, couple of dents, but still very restorable. engine turns over with attached 12volt starter.it will be for sale complete until June first, then I will be taking offers on individual parts. message me any questions you may have. Paris Tennessee area. $1600 price is firm as I am taking a loss alread”

Looks like a nicely updated jeep. Some closer up pics would be better.

https://www.facebook.com/marketplace/item/1002335781295710

“I have for sale my 1948 Willy’s. I hate to sell but we bought a house and need the money for projects, this jeep is a “restomod” powered by a Buick dauntless v6 bolted to a t-18 4 speed and a Dana 20 transmission, the jeep also has a warn overdrive and Chevy axles. We have a soft top, bikini top and a spare wheel and tire to go with. Everything works as it should and boy does it get attention, I am not in a rush to sell however feel free to reach out with any questions thanks!”

Seems like a fairly stock column shift 2A (probably serial number in the higher 30000s range).

https://www.facebook.com/marketplace/item/1002944394947049/

“46 willy’s jeep column shift low serial number great driver clean title. 8k cash takes it. Nothing less.. have the doors and spare in garage.”

UPDATE: price dropped to $4500.

(06/26/2024) This has a replacement body, so there seems like value here.

https://www.facebook.com/marketplace/item/1862067244269544

“This is a 1948 Willy’s flat fender jeep. This jeep is a rolling project. New factory tub.Comes with custom bumpers, custom willys vynal seats. Custom dash pads and center console. New gauge cluster Custom hood scoop Fully enclosed frame. Full roll cage, steel chrome wheels, 305 engine and auto transmission. Installed. Over $12000 has been invested into this jeep. My loss is your gain. No time to finish. To many other projects. $5000 obo.”

UPDATE: Price dropped to $2700.

(06/24/2024) This 2A has some early Husky hubs. Note this has Wash State plates.

https://www.facebook.com/marketplace/item/1546736745871357

“1948 Willys CJ2A with GM Iron Duke engine. Has a welded in roll bar, power steering. Body is in great shape. Does not run and has no title. Was set up for trails but is street legal. Bought for parts, but is too nice to strip down.”

This may be worth a look. Has rear mounted custom tank.

https://www.facebook.com/marketplace/item/374736948716973/

“1946 Willy’s, has a Buick v6 motor plenty of power, new paint, new tires, nice seats, has the original running gear that works perfect, new fuel cell, been in the family since 1960, the ultimate side-by-side, if a tree gets in your way just mow it over, this thing is built to last, no flimsy A arms and tiny axles, it’s a tank, I had it lifted, with big tires and rims, it looked good but didn’t perform off road, back to a two inch lift with skinny tires, works the best, put chains on the front tires, and you will never get stuck. The motor so strong it will sling mud thirty feet in front of Jeep.”