CJ-2A Research Archives

CJ-2A, cj2a

To Top

2 Stainless Body Kits for Sale Oakland County, Mi $5000 each

• CATEGORIES: Body Parts, CJ-2A, CJ-3A, stainless/jewels • TAGS: .

Mark has 2 Stainless Kits still available at $5000 or both for $8000, which readers have likely seen listed previously.

However, this time I got curious, so I did some math.  I went to 4WD.com and priced out the cost of buying steel versions of the same parts, just to see a price comparison.  Here is the result:

$3400 for non willys stamped CJ-3A tub (includes fenders, body , tailgate, windshield frame)
$361 hood
$246 grille
$150 roll bar
$213 seat frame
$213 seat frame
$300 bumpers
$700 White Vinyl Top
$5583 total

Not included in that total are other parts that are included in the stainless kit:

$?  Frame
$? Grab bars
$? Other parts

So, $5000 is looking like a pretty good price for all those parts, especially given they are stainless steel.  To see how they look together, you can see 1 of several stainless jeeps Mark assembled below.

“For sale is a COMPLETE stainless steel cj2a jeep kit MINUS DRIVETRAIN. These kits were imported in from the Phillipines years ago, I have built 5 of them and lost interest in the last 3 so instead of them sitting in the corner of my garage for another 10 yrs I have decided to sell them. I sold one last year and now have 2 left.

The kit includes: mild steel frame, stainless tub, grill, fenders, hood, tailgate, windshield frame, seat frames, rollbar, grab bars, and TONS of other stainless accessories. the top is white vinyl.
Asking $5,000 CASH each, I will not ship but am willing to crate and help load when picked-up or if buyer arranges all the shipping details i will help load. Attached is a older pic, I can email more (having problem uploading them). Please feel free to PM or call with any questions, Mark 248-818-8560 Located in Oakland County, MI”



To Top

1948 CJ-2A Ozawkie, Ks $3000


This looks pretty good for the price.

“1948 Willy’s Jeep Overland …. New top … New roll bar….Engine runs excellant… 4 wheel good…New clutch. Original condition…Has some body rust. 785-213-1480”


To Top

1948 CJ-2A Astoria, Or $2950


This looks like a nice little rig.

“1948 Jeep Willys 4cyl flat head engine, all stock running gear, runs and drives great, come with soft top and soft doors. Just in time for summer 2950 obo. Call Wes at 503-298-9109 or email”


To Top

1946 CJ-2A Modesto, Ca **SOLD**


UPDATE: Was $5000. **SOLD**

(01/29/2011) This has a ’66 chassis.

“hi i have a 1946 jeep cj on a 66 chassi also have the 46 chassi new new tires still has the hairs on them there 33s 5 inch lift buik v6 t90 transmission dual stick transf new soft top new carb new seats custom full roll cage has rear light and front lights fully wired need to sell i have a yj im trying to fix willing to trade for another jeep”

To Top

Wanted: CJ-2A & 3A Parts Denver, Co

• CATEGORIES: CJ-2A, CJ-3A, wanted

Here’s a parts buyer.

“Im restoring my 1950 willys cj3a. I need many parts to get it back on the road. I also need a top/hardtop. Email me what you have.”


To Top

1947 CJ-2A Payette, ID **SOLD**


UPDATE: **SOLD** Was $6500.

Here’s a nice looking CJ-2A.

“47 willys I have owned this jeep for 25yrs, last spring I started bringing it to good driving condition , all new brake shoes wheel and master cylinders ,brake hoses , one new drum. from the steering box down all new joints. five new tires, new best top,new distributor , carburator,seats redone,rubber around windshield and coweling replaced.rebuilt starter, generator and regulator set to 8v,and new 8v battery . I would consider a reasonable offer or if you have something the arctic cat dealer will alow in trade I would consider dicounting for that. this jeep is almost totaly stock has original 4 cylnder go devil flat head engin.”


To Top

1948 CJ-2A Parts Elberfeld, In $200


Lots of parts.

“1948 Willys Jeep parts for sale. CASH ONLY. All prices are negotiable, always interested in unique trades.

I have a frame for a 1948 Willys Jeep, it has a clear Indiana title. I am parting it out. The frame has both a front and rear axle $100.00 each, wheels not included.

Steering column and box $75.00

3 good wheels $75.00 each, they are $100.00 each on line.

Transmission, transfer case not included, $75.00

Hood not rusted out but the support brace in back is broken and would need to be welded $75.00

Grille with turn signals and 1 headlight still in it, very good shape $200.00

Tailgate not rusted out but some slight damage $150.00

Pair of flat fenders, fair condition $100.00 each

Most motor parts.

Call 812-455-4578 or email put Willys in the subject line so I know it is not spam. CASH ONLY!!!”


To Top

1947 CJ-2A Rolling Chassis Chatham, Nj eBay


Steve’s got this chassis for sale.

“Rolling Chassis of what appears to be either a 1947 or 1948 Willys CJ2A.  The chassis has been modified by previous owner to use 8 Cylinder engine so front area has unoriginal modifcations to accomodate larger engine. (i.e. cross member is not original, engine mounts are not original).  Chassis has other issues – delamination of top and bottom straps on passenger side frame, crossmember brackets on frame have been modified.

Really selling for running gear, chassis parts – front bumper, rear cross member and tranny and transfer case. Tranny is a T-90 but it has been modified to fit onto an 8 cylinder engine, it appears that the main shaft is extra long to fit into larger engine. also has adapter on tranny for 8 cylinder engine bell housing.

Wheels and pintel hook on jeep do not go with it. I will supply non-original wheels and tires for transport. Sold as is, no guarantees, no returns. Local pickup only. No sales outside US. No scams, no trades no checks.”

View all the pics on eBay

To Top

1946 CJ-2A Republic, MO **SOLD**


UPDATE: **SOLD** Was $1000.

This runs and drives.

“1946 CJ2-A Willys Jeep… runs good, has original engine and ALL parts; I put an aftermarket carb on it and a reproduction fuel pump – however I have BOTH of the original pieces that can be re-worked and I’m sure they would work (I cleaned them both but just couldn’t get it to run with them).

New suspension all around, original military spec rims and good rubber. Have a new shop manual as well – plus lots of odds and ends parts. I have an extra fly wheel, extra front differential with hubs, extra steering wheel and neck assembly. I need to move to a smaller work shop and have to get rid of the project… come and get it!!”

To Top

1946 CJ-2A Casa Grande, AZ **SOLD**


UPDATE: **SOLD** Was $1400.

(09/21/2010) Needs work.

“i have a 47 willys the tube is in good shape,frame and drive train is in very good shape,all the drive train is there.it ran when i parked it but needs some work,it has the 4 cyl. its not a flat head its all there,2nd owner.”

To Top

1946 CJ-2A Berlin, NJ Status Unknown


UPDATE:  Status Unknown. Price dropped to $1595

(08/30/2010) This needs work.

“1946 CJA Jeep -Needs restoration. Original motor, trans, etc.  But there are enough spare parts that are included in the purchase that will make the restoration a breeze.”

To Top

1946 CJ-2A Palocedro, CA **SOLD**


UPDATE: **SOLD** Was $3500.

(03/30/2010) It appears this has a replacement body.

“1946 Jeep CJ2A, original 134ci flat head, many new parts, no rust, very good condition and very original.. $3500.obo ”

To Top

1948 CJ-2A Morris, Il $900


This looks like a good price.

“Jeep Willy CJ 2A 1948. V6 Jeep runs but needs some work. Call 815-693-6165.”


To Top

1946 CJ-2A Santa Fe, Tx **SOLD**


UPDATE: **SOLD** Was $4500.

It’s got some big tires.

“1946 willy jeep runs great…great for deer lease……35″ in. mud tires…..3,500 obo”

To Top

1946 CJ-2A Bay Area, Ca $4000


It’s an early ’46, but has been modified.

“1946 Jeep with 327 small block Corvette engine. Also has Chevy transmission with granny low gears. Has recently apholstered seats and driver side slightly modified to fit taller person. I got this to have a fun toy up at the property but just dont have the time to mess with it now. Perfect project for anyone who wants one of the first four wheelers ever made! Please call if you any questions. I need to sell this right away and have the pink slip here ready to sign. For more information please call Tom at 831-750-9674”


To Top

1946 CJ-2A Cobalt, Ct $3500


UPDATE:  Still Available

(11/18/2010) This looks like a replacement body.

“1946 Willys Jeep. This is a rare early # column shift jeep. This Jeep was rebuilt in the 80’s and still shows good. I have all service records from 1980 to today. It was also converted to 12V. and it has 33″ tires side bars and roll bar. Truck Runs good but needs the following to be put on the road. Brake work. 1 windshield glass. Rear springs. Exhaust. I have a set of springs I will throw in and also a brand new full exhaust system still in the box. Please call and feel free to come take a look. 860-301-9707. Thank you.”


To Top

1948 CJ-2A/m38 Montrose, Co **SOLD**

• CATEGORIES: CJ-2A, M-38 • TAGS: , , .

UPDATE: **SOLD** Was $4500.

(06/24/2010) This looks good.

“1948 Willy’s CJ2A, Ford 2300CC 4 cyl, Rancho lift, Supertrack muffler, stock 3 spd tranny, waren winch, new soft top, new 32×11.50 tires, aluminum mod wheels. “

To Top

Year? Flattie Elma, Wa $7500


UPDATE:Still Available

(02/15/2011) This looks like a nice build.

“Small block Chevy with 3 speed manual; All services reciently done; Call for more info


To Top

1947 CJ-2A Coopersburg, PA **SOLD**


UPDATE: **SOLD** Was $400.

There might be some value.

“1947?? willys flatfender
original 4cyl flathead engine
original t90 3spd n transfercase
frame is not rotted the body however is shot.
if you are interested in just th rolling chassis i can pull the body off.
$400 OBO NO TITLE!!!!!”

To Top

1947 CJ-2A Piscataway, NJ **SOLD**


UPDATE: **SOLD** Was $400.

Needs a body and some work.

“1947 Jeep CJ2A rolling chassis. Frame has rust in the usual places and needs some work. The motor needs to be rebuilt a L-134 straight-4 Go-Devil.
Transmission, transfercase, suspension, rear, four wheels (only 3 tires) . No title or registration ! For parts or project ! Cash only ! Leave me your name & number & best time to reach you and I’ll get back to you.”

To Top

1947 CJ-2A Marysville, WA **SOLD**


UPDATE:  **SOLD** Was $1000

(02/16/2011) This looks like a solid foundation.

“Been stored in garage; frame and body all metal no rust. Has everything but engine; tires in great condition. $1,000.00 ”

To Top

1947 CJ-2A Crawler Reliance, WY **SOLD**


UPDATE:  **SOLD** Was $8000

(06/30/2010) Here’s a crawler.

“47 cj2a based rock crawler v8, auto, locked, new tires, hydro steer assist, runs on propane. plus lots of new parts!!!!!!!!! installed befoure easter. we are looking for a cummins truck, or a 4 seat sand rail, or mini rail”

To Top

1946 CJ-2A Springfield, MO **SOLD**


UPDATE: **SOLD** Was $3000.

It runs and appears pretty stock.

“1946 CJ2-A Willys Jeep… runs good, has original engine and ALL parts; I put an aftermarket carb on it and a reproduction fuel pump – however I have BOTH of the original pieces that can be re-worked and I’m sure they would work (I cleaned them both but just couldn’t get it to run with them).

New suspension all around, original military spec rims and good rubber.

Have a new shop manual as well – plus lots of odds and ends parts.

I have an extra fly wheel, extra front differential with hubs, extra steering wheel and neck assembly.”

To Top

1946 CJ-2A Eureka, Mt Call for Price or Offer Trade


Area code is 406.  Looks like a solid rig.

“Fun summer toy, runs great, goes anywhere
big mud tires, winch, dana 44, arb lockers, extra axels and tire
we need a couple snowcats and we already have too many summer toys so would be up for a trade
This is the funnest off road toy around, play in the mud, climb some hills, awesome articulation
been garaged all winter, well taken care of
Never been stuck or on its lid!! and its been in some crazy places. thats how good it is.
please call Dustin 406-291-1945 or 406-889-3589
can email more pics”


To Top

1946 CJ-2A Roanoke Rapids, NC **SOLD**


UPDATE: **SOLD** Was on eBay. Here’s another militarized jeep.  Note there is no reserve on this. The bid price has already reached $5,665.  I’m kind of surprised that the bidding has hit that height already.  The ‘gun’ looks really fake in this one photo.  The summary text seems fair.

It looks like in this case someone has taken a flattie in poor condition (which likely explains the missing rear wheel body areas) and turn it into something reasonably cool without investing too much money.  Jim was  one of the best at doing that.

“Great little jeep 98% restored as MB.  Engine restored, NEW tires, intake/exhaust manifold, carb, head, fuel pump, wiring harness and rear suspension. New paint job, little rust on frame.  Comes with all things seen in photo.”