CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1951 CJ-3A Center Moriches, NY $10,000


UPDATE: Still Available.

(11/07/2021) There might be some rust on the driver’s side or just peeling paint.


“1951 Willys JeepCJ3A nearly in original condition. Original 4 cylinder engine is strong, starts easy and runs real well. Solid body. New wiring harness that includes turn signal lights has been installed. A new speedometer/odometer was installed along with a new fuel gauge. New front springs and four new shock absorbers have been installed. Lap belts added. Four wheel drive operates well. There are locking hubs. New York registration and inspection are current. Clear title. This vehicle is an eye catcher and fun to drive.”

1951-cj3a-center-moriches-ny0 1951-cj3a-center-moriches-ny1 1951-cj3a-center-moriches-ny2 1951-cj3a-center-moriches-ny3 1951-cj3a-center-moriches-ny4

To Top

1949 CJ-3A San Diego, CA $2500


No pics provided. I”m assuming the 10-inch wheels are the width?


“Willys CJ3A 1949, L-head, 6-volt, rusty, non-op, clear title. 10″ wheels.”

To Top

1951 CJ-3A Luther, OK **SOLD**


UPDATE: **SOLD** Was $6900.

This body has the dash ignition hole for a 2A, so likely a 2A body. But, given the updates, it doesn’t really matter much. The gas tank has been been moved to the rear.

1951-cj3a-luther-ok0 1951-cj3a-luther-ok1 1951-cj3a-luther-ok2 1951-cj3a-luther-ok3 1951-cj3a-luther-ok4

“Great running Willys Jeep! Clean OK title. Has a 283 Chevy V8 so it’s a bit of a hot rod. Body is in good condition. Paint job is just rattle can OD green. Tires are excellent. Tight steering and good brakes with new master cylinder. All lights including turn signals are functional. Seats were recovered fairly recently and it has seat belts installed for a bit of added safety. Drivetrain is stock other than the engine, so it’s geared low, but will cruise down the country roads nicely. Also has a PTO driven winch up front. Not interested in trades. No shipping, local cash sale only.

To Top

1951 CJ-3A Fort Cobb, OK $1500


UPDATE: Price dropped to $1500.

(12/14/2021) Unclear how much value is here.


51 jeep cj engine transmission 4 wheel drive worked when parked engine locked up from sitting needs a lot of work body pretty straight no title would do trade”

1951-cj3a-fortcobb-ok1 1951-cj3a-fortcobb-ok2 1951-cj3a-fortcobb-ok3 1951-cj3a-fortcobb-ok4

To Top

1953 CJ-3A Nampa, ID $15,600

• CATEGORIES: CJ-3A • TAGS: , , , , .

UPDATE: Still Available.

(04/19/2018) This one was purchased out of Clovis. You can see the ad from 2013 here.


“1953 Willys Jeep. Professional restoration done in Clovis California. In great shape. $3000 custom top. Has power steering straight body and ghost flames. Chevy v6 engine firm on price that is the low. Please no story tellers tire kickers or lookers..”

1952-cj3a-clovis-boise-id1 1952-cj3a-clovis-boise-id2

1952-cj3a-boise-ida1 1952-cj3a-boise-ida2 Continue reading

To Top

1952 CJ-3A Tonasket, WA $10,000


UPDATE: Still Available.

(12/08/2021) Looks solid.


“1952 CJ3A Willy’s Jeep. 95% original. Runs good, minimal rust. It was restored in the late 1980’s. It has the original engine and tub. Bantam trailer can sell with the Jeep or separately. $10,000 for Jeep and trailer.”

1952-cj3a-tonasket-wa1 1952-cj3a-tonasket-wa2

To Top

Flattie Project/Parts Middleton, ID $1500


Not sure how much value is here.


“Older flat finder jeep project 2 body’s has 327 with 4 speed and transforcase mostly in tack this is a project.no title 1500.00 or trade”

flattie-middleton-id1 flattie-middleton-id2 flattie-middleton-id3

To Top

1952 CJ-3A Phoenix, NY Make Offer


Lots of updates to his tall riding 3A.


“Power steering power brakes updated pedals and steering column original engine and running gear best top and doors custom bumpers and winch 34 inch Super Swampers axle under springs lift this would be a awesome vehicle for someone with a lot of property because the chances of getting it stuck are small was appraised for 20,000 make a reasonable offer”

1952-cj3a-phoenix-ny1 1952-cj3a-phoenix-ny2 31952-cj3a-phoenix-ny 1952-cj3a-phoenix-ny4

To Top

1952 CJ-3A DeLand, FL $5400


Not sure how much value is here.


“1952 Willys CJ3A Jeep. Solid, but needs lots of sorting out. Been in dry storage for over 15 years, but ran well and everything except brakes worked well when parked. Original flathead engine replaced years ago with Willys overhead valve 4 cyl. A great project that needs a new home. May trade for a nice gas powered golf cart. Leave your contact information and we’ll get back to you with details.”

1952-cj3a-fl1 1952-cj3a-fl

To Top

1959? CJ-3A? White Oak, TX $700


The body appears to be a 3A. I’m not sure why the chassis is being stored upside down? I figured that was just odd enough to post about it.


“Willis jeep for parts. Frame and engine is bad. Yes it has a clear title. Message for info. $700 OBO ”

year-cj3a-tx1 year-cj3a-tx2

To Top

1952 M-38/CJ Cookeville, TN **SOLD**


UPDATE: **SOLD** Was $7500.

Tom shared this one. This has a CJ chassis (maybe 1952 CJ-3A?) and an M-38 body.

“1952 Willys Jeep. 4×4, 4 cylinder, 3 speed, plus high and low, runs great, 4×4 works great. Clean Tennessee title $7.5 k or obo. Will also trade for old 70’ to late 80’sToyota Land Cruiser or Maybe a side by side.thank all for looking”

1952-cj3a-m38-cookeville-tn0 1952-cj3a-m38-cookeville-tn1 1952-cj3a-m38-cookeville-tn2 1952-cj3a-m38-cookeville-tn3 1952-cj3a-m38-cookeville-tn4

To Top

1949 CJ-3A Belgrade, MT **SOLD**


UPDATE: **SOLD**. Was $11,500.

Debbie is selling this nearly completed rebuild of a CJ-3A. It runs and drives, but still needs a few things completed. It has a new body kit.

1949-cj3a-belgrade-mt1 1949-cj3a-belgrade-mt3 1949-cj3a-belgrade-mt4

“My husband inherited this Jeep from his father and was in the process of doing a complete restoration when he passed away suddenly. He was always a meticulous worker and I think the pictures of the frame, engine, drive train, steering and brake assemblies show the quality of work he did. He completed all the mechanical and electrical work.

The engine was rebuilt and I have the receipt from the machine shop. It has a Saginaw steering conversion, a new dual master brake cylinder, and many other new parts which can be seen in the pictures. I have many receipts for the new parts he bought and installed. The body that was on it when he inherited it was very rusty, so he bought and installed a reproduction tub, fenders and rear seat frame. He saved the original serial number plate and body number plate from the firewall of the old body. I have those and they will be included in the sale.

The hood, grill, windshield frame, front seat frames and tailgate are the ones that were on it when he inherited it. I’m sure there’s other work he did that I haven’t mentioned. The picture showing the Jeep running with the headlights on was taken in September 2021. It runs great and just needs paint, upholstery, window glass, etc. to complete the restoration. I’m hoping it will be purchased by someone who enjoys these old Jeeps and will appreciate all of the fine work my husband did. I have a clear Montana title in my name, the VIN on the title matches the serial number on the firewall plate I have. $13,500.00”

To Top

Year? CJ-3A Tustin, CA $4500


It’s a project.


“willys cj3a WITH TITLE non op. new oil lines, fuel line, filter, fuel pump, carb rebuild kit “I have a W-O carb for it”, and a complete brake over haul kit “everything” and a bunch of other new used parts ready to go. $4500 firm no if ands or buts. I dont have it running yet either.”

year-cj3a-tustin-ca1 year-cj3a-tustin-ca2 year-cj3a-tustin-ca3 year-cj3a-tustin-ca4

To Top

1948 CJ-2A & 1950 CJ-3A Palm Coast, FL $2000


The price appears to be for both. No pics provided.


“A 1948 and a 1950 CJ3A for sale ! These are both project vehicles in rough shape no title the 1948 has a straight six engine 1950 no engine no transmission ! Call for details”

To Top

1949? CJ-3A Ex-Racer Hood River, OR $3000

• CATEGORIES: CJ-3A, Racing • TAGS: .

UPDATE: Still Available.

(10/10/2021) This looks like an old PNW race rig.


“Mug bogg dragger has ford 9 rear end Danna 44 front built 350 with hurst shifter just needs back yoke on rear end and gas. Looking to trade for a 4by4 truck or cash”

1949-cj3a-hoodriver-or7 1949-cj3a-hoodriver-or8 1949-cj3a-hoodriver-or9

To Top

Year? CJ-3A APU Robertsdale, AL $700


Darron spotted this APU jeep for sale. It still has the dash gauges.


“1946 Willys Navy Jeep no engine but rest of drivetrain there, has been used as yard art and started to build rat rod at one time.”

year-cj3a-apu-robertsdale-al1 year-cj3a-apu-robertsdale-al2 year-cj3a-apu-robertsdale-al3 year-cj3a-apu-robertsdale-al4

To Top

1949? Custom Jeep SC $2000


This custom project looks like a fair price.


“49 willys rock crawler project needs motor runs but has knock no title off-road use only. I was going to put a k5 drivetrain in it but I’ve lost interest”

1949-custom-sc1 1949-custom-sc2 1949-custom-sc3

To Top

1951 CJ-3A Seale, AL $2500




“It’s not running right now,it was running,”

1951-cj3a-seale-al2 1951-cj3a-seale-al3 1951-cj3a-seale-al4

To Top

1976 Stainless Flattie Jacobsburg, OH $18,000

• CATEGORIES: CJ-2A, CJ-3A, stainless/jewels

This has been available for a while, but it’s the first time it has popped up on my searches.


“1976 Jeep, Stainless steel, Straight 6, 3 speed manual”

1976-stainless-flattie-jacobsburg-oh1 1976-stainless-flattie-jacobsburg-oh2 1976-stainless-flattie-jacobsburg-oh3 1976-stainless-flattie-jacobsburg-oh4

To Top

1952 CJ-3A Georgetown, IN $7500


Needs a fuel pump at the very least.


“Good shape, solid, custom built aluminum fuel tank, runs, needs a fuel pump. Have title in hand.”

1952-cj3a-georgetown-in1 1952-cj3a-georgetown-in2 1952-cj3a-georgetown-in3 1952-cj3a-georgetown-in4

To Top

1952 CJ-3A East Jordan, MI $11,500


This has been available for a while, but it only recently popped up in my searches.


1952-cj3a-eastjordan-mi0 1952-cj3a-eastjordan-mi1 1952-cj3a-eastjordan-mi2 1952-cj3a-eastjordan-mi3 1952-cj3a-eastjordan-mi4

“For sale: 1952 willys cj3a jeep. 6 volt. Clear title. Professionally rebuilt WO carter carburetor. New points ,plugs ,condenser and coil. Almost entirely stock except for oversized seats and swing out tire carrier. The gas gauge works sporadically . Probably a ground wire issue. I don’t drive it more than 14 miles at a time so has not been a problem for me. The only other suspect part is the generator. The jeep only uses the battery to start it unless you use the lights. I just charge it up once a week to make sure it’s topped off. Everything else works as it should. Garage kept and only taken out in nice weather. I’ve had fun with it for 5 years, time to share with someone else. Asking $11,500”

To Top

1948? CJ-2A? Rapid City, SD $6000


Listed as a 1948 CJ-2A, the body looks to be CJ-3A. The front frame rails lack the gussets. Might be a good price.


“1948 Willys CJ2A, 6 volt, start easy and runs great, drives, 4×4 HI & Lo work, all 3 gears & rev work, almost all OEM motor, Need to see, hear, and drive to appreciate, Nice little toy, clear title in hand.”

1948-cj2a-rapidcity-sd-5 1948-cj2a-rapidcity-sd-6 1948-cj2a-rapidcity-sd-7 1948-cj2a-rapidcity-sd-8 1948-cj2a-rapidcity-sd-9

To Top

2 CJ-3A? Bodies, 3 Frames Casper, WY $600

• CATEGORIES: Body Parts, CJ-2A, CJ-3A, Parts

It appears to be $600 for all. The white body looks to be a 3A. I can’t tell what the bottom body is. At least one frame is a 2A.


“Two jeep tubs and 3 frames. No titles. Year unknown.”

bodies-frames-casper-wy1 bodies-frames-casper-wy2 bodies-frames-casper-wy3

To Top

1951 CJ-3A Summerset, SD $6500


The pics suggest this is still a project.


“***$6500.00 firm or 5k + trade!!!*** 1951 Willys CJ3a SBC 350 400 HP, Rebuilt Turbo 350 with shift kit, NP205 transfer case, Power Steering. 33” Super Swampers SX’s on the rear & Boggers on the front. Heavy duty Transmission cooler, Disk brakes front and rear, B&M Shifter. New fuel tank, Holley 650 Street Warrior carb, plugs, wires, MSD HEI distributor, all new fluids, alternator, Edelbrock fuel pump. Body is pretty straight, Runs and drives great 4wd works good. I have a set of Dodge Dana 60 front axles I was going to use to set up rear steer for $700 extra”

1951-cj3a-summerset-sd1 1951-cj3a-summerset-sd2 1951-cj3a-summerset-sd3 1951-cj3a-summerset-sd4

To Top

1950 CJ-3A The Dalles, OR $4000


UPDATE: Price dropped to $4000.

(12/05/2020) A ran-when-parked specimen (though looks like it was parked many years ago). It includes a set of rare X-Style Desert Dogs which look little used. Unclear how much value is here, but the price seems to overestimate the value.


“1953 flat head ford v8, Was told it ran when it was parked. The more I put into it the more I will raise the price. Elec front winch, pto rear winch. If your interested i will get it started before I sell”

1950-cj3a-thedalles-or0 1950-cj3a-thedalles-or2 1950-cj3a-thedalles-or3 1950-cj3a-thedalles-or4 1950-cj3a-thedalles-or5