CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1949 CJ-3A Sherwood, Or $2200

• CATEGORIES: CJ-3A

Only 17k miles on this very stock CJ-3A.  Sherwood is southwest of Portland.  Seems a pretty good price.

"1949 Willy's Jeep, mostly original, runs like a top. Have new soft top and doors still in box, all new brake hydraulics and linings, 17K, 2 sets tires, master cylinder, wheel cylinders, brake hoses, etc. replaced recently. Carburetor overhauled. Runs well. Call Dave at 503-572-9725 or respond to post."

http://portland.craigslist.org/wsc/rvs/721135208.html 

 
To Top

1951 CJ-3A Jasper, GA **SOLD**

• CATEGORIES: CJ-3A

UPDATE: **SOLD** Was on eBay.

“This is a 51 willys jeep, the good it has fresh tuneup on the flathead 4 cly. New carb , starter,battery,dist and exsaust. New front hub’s and new tire’s and wheel’s. The jeep run’s and drives good. It has been converted from a 6 volt to 12 volt charging system. The 4 wheel drive work’s good. There is no rot anywhere. The bad, it needs a paint job and passenger seat bracket. This jeep is sold with bill of sale only. No warranties. I will try to answer any question’s you may have. Thank’s and good luck.”

View the pics on eBay

 
To Top

Fiberglass Flatfender taken apart, Chicago eBay

• CATEGORIES: CJ-2A, CJ-3A • TAGS: .

UPDATE:  The seller has reposted this on eBay with more pics.

This looks to be the same fiberglass body as my first jeep.  The seller is correct; this body is light — I used to move the body myself by crouching underneath it and picking it up on my back (my current body is somewhat heavier).  However, I disagree with the seller; this body makes a fine jeeping body.  But, if used for jeeping, tie a cage to the frame and use the cage to help support the body.

“1949 Willys CJ 2 A/B, I have one title with no vin plate, Two Straight solid frames, Light weight single wall fiberglass body tub (not my recommendation for serious off road use, good for a sand buggy), Overhead valve inline 4 cylinder engine (from a 3B or early CJ-5), 2 T 90 transmissions with transfer cases, 2 sets of stock willys axles, one of which has new brake shoes and hardware”

 
To Top

1951 & 1952 CJ-3A, Forks Wa, $1750

• CATEGORIES: CJ-3A

UPDATE:  Tom Florenz just let me know that these jeeps are still available. 

These will require a closer look.

"2 for the price of 1. Clear titles. Don't run. Have extra transfer case with pto. 52 needs an engine, clutch and one of the transfer cases installed, and the steering finished converted. The 51 looks to be as stock as I know with the L134 engine. After I got it home and cleaned out the junk I found most of the engine parts. It will need to be rebuilt. the 51 could be towed the 52 will have to be trailered. More pictures available. originally purchased to honor a fallen Marine (former student). No heart to finish the job."

http://seattle.craigslist.org/see/car/642259969.html 

 
To Top

1949 CJ-3A Vancouver, Wa $2250

• CATEGORIES: CJ-3A

This sounds like a pretty fair price for a flat fender in good working condition.  Not many comments about the body, so that will likely need closer inspection.

"This is a 1949 Willys CJ3A Jeep that runs and drives good. Has original flathead 4 cyl engine, T90 3 speed trans and model 18 twin stick transfer case. New 12v alternator, voltage regulator, battery and the original starter has been overhauled and works like new. Has front bucket seats and a rear seat as well. Roll bar, bikini top, spare tire w/ carrier and fuel can carrier. All wiring, gauges, blinkers and lights work fine…. 360-513-9824"

http://portland.craigslist.org/clk/car/714826867.html

======== 

This same seller has the following parts for sale:

Complete running F134 engine carb to oil pan $250 Willys CJ3A frame in great shape $250
Willy's stamped hood for CJ2A or CJ3A $35
Dana 25 front axle from CJ2A $75
Koenig PTO unit rebuilt W/ mounting bolts $225 360-513-9824 

http://portland.craigslist.org/clk/pts/714817726.html

 
To Top

1951 CJ-3A San Francisco $8500

• CATEGORIES: CJ-3A

What I found interesting about this jeep was that it appears to be a standard wheel base running a chev 327 and TH-400. That's a pretty tight fit.  Must be a short rear driveline.  Note the driver's side fuel inlet in the back.  Looks like some good work all around.  I'd like to see some more pics of this jeep.

"$8500.00 OBO, Super clean, Fully restored, Rootbeer Brown Paint, Brown leather High bucket seats, 327 chevy corvet engine, Automatic Turbo 400 Transmission with over drive, 33 inch Dune tires custom wheels, tow winch and never been off road since restored, CD player plus extra's.  CALL DON 209-652-6193"

http://sfbay.craigslist.org/eby/car/702949234.html 

 
To Top

2 Jeeps in Minden, NV **SOLD**

• CATEGORIES: CJ-3A, MB

UPDATE: **SOLD** was $3500

These two jeeps have been for sale for a few months, though they haven’t been listed in a while.  Both jeeps have full cages.  One jeep comes with a winch.  Both bodies appear in at least decent shape.  Unfortunately, Minden is a bit out of the way.  Given the price of gas, I doubt too many people are going to drag their haulers down to Minden unless the price drops further.”

 
To Top

1951 CJ-3A Maryland eBay

• CATEGORIES: CJ-3A

This sounds like a great jeeper.  It could probably use an overdrive, but otherwise sounds ready to hit the trails.

"225 V6 motor (runs good), t-90 3-speed transmission, Dana/spicer model 18 transfercase, dana 44 front axle, 4.88 gears, detroit locker, disc brakes, full-floating dana 44 rear axle, 4.88 gears, detroit locker, drum brakes, shackle reversal (front), spring-over conversion (with wide leaf springs) and more …."

View all the pics here 

 
To Top

1951 CJ-3A Phoenix, AZ **SOLD**

• CATEGORIES: CJ-3A

UPDATE: **SOLD** Was on eBay

“29K original miles and has CA title.  Restored to original color – Luzan Red – and Burnt Maple Wheels. These colors were offered on a 1951 original Jeep paint chip chart and look great as you can see!  Purchased this vehicle October 07 in Visalia, CA from Original owner’s son-in-law. See #1, #2 photos for condition at that time. Was running condition but not being driven….”

 
To Top

1951 CJ-3A Jamestown, NC eBay

• CATEGORIES: CJ-3A • TAGS: .

The bid is only at $610 as of Sunday morning.  The equipment could use some cleaning, but looks to be a complete package.  I haven't seen trenching equipment for sale that is in such good shape.

"1951 CJ3A Jeep A Trench with The Auburn Willys Overland authorized Trencher attachment.  Jeep is complete.  Has approx $2,000 worth of hard to find vintage options like Govenor, rear tractor box PTO, Hub PTO, etc…alone.  Jeep used until the motor failed, then parked, resulting in the Jeep staying complete.  Have owned for over 5 years and was bought from an off road equipment dealer.  Unique piece of Jeep Willys history for a collector…"

See all the pics on eBay 

 
To Top

Stainless Steel Flatfender Camas, Wa ** Sold **

• CATEGORIES: CJ-2A, CJ-3A, Unique Jeeps

This is probably being sold by a seller who has been trying to sell a couple other nicely finished jeeps and stainless jeep parts.

“Stainless steel willys jeep very rare call for details.will trade for muscle car,hotrod,pro street car,nice lifted rubicon wrangler rockcrawler,beach property. *** SOLD***”


 
To Top

1953 CJ-3 (A or B?) Bush Prairie, Wa $500

• CATEGORIES: CJ-3A

Just posted this morning.  Maybe there's something worth saving?  Bush Prairie is just south of Olympia.

"GREAT PROJECT. ALL PARTS THERE. NEEDS WORK. $500.00 OBO. YOU HAUL AWAY."

http://portland.craigslist.org/clk/car/649253598.html