Seller will sell both for $2500 or $1250/each.
https://www.facebook.com/marketplace/item/243928811615237
“Both Jeeps are not running, but have complete engines and drive trains. Will sell separately. $1250 each, OBO.”
Seller will sell both for $2500 or $1250/each.
https://www.facebook.com/marketplace/item/243928811615237
“Both Jeeps are not running, but have complete engines and drive trains. Will sell separately. $1250 each, OBO.”
Update: **SOLD** Was $7500. …. Navy, not Air Force like I mistakenly put down. I saw the plane on the back and didn’t look closer.
This appears to be an Navy-themed CJ-3A.
“Frame-off rebuild by a shop instructor, lovingly. F-head, 134 CID, 4 cylinder “Hurricane.” Runs great with a nice warm-up. Seats, Lock-out hubs. No top. More pictures on request. 7500 OBO”
Not sure what model of top that is.
https://www.facebook.com/marketplace/item/818564979930622
“Been garage kept for last 20 years comes with few extra parts including two Willy’s industrial L134 engines has had top doors and heater. Has clean title”
I assume “loose” means the engine is free?
https://www.facebook.com/marketplace/item/842382743717981
“1951 Willys Jeep with snowplow blade. 4 cylinder. Chevy motor is loose. Body is in good shape. Bill of sale. No title.”
A parts jeep that might be worth a look.
https://www.facebook.com/marketplace/item/245500894721821/
“1949 CJ3A body, frame, axles. Nice patina. Some extra parts included. No title. Price is firm.”
Unclear if there is much value, but appears to have an early head.
https://www.facebook.com/marketplace/item/986019492482178
“195? Willys CJ3a non running project jeep. Missing data plate will come with bill of sale. Located Auburn,AL”
UPDATE: Price dropped to $2850.
(05/25/2023) Doesn’t run at the moment.
https://www.facebook.com/marketplace/item/350376067339175
“Complete. All parts are here. Was turning the flywheel to tighten bolts and it got stuck. Not sure what the problem is but there was no impact, just a slow turn by hand. Should be an easy fix. The previous owner told me that the engine had been rebuilt. I never got far enough to find out. It rolls and stops. The 12 volt battery is good. I bought a new regulator and stater for 12 volts. About $400 for those. Running would b worth over $5,000. I am thinking $3,000 or the best offer close to that. Clear title. Kept indoors.”
This is a classic Fresno-area build with the oversize glass in the windshield, the doors, and more. It may include a soft top. I see no evidence it includes a Muller top.
https://fresno.craigslist.org/cto/d/fresno-1951-jeep-cj3a/7672608100.html
“Very clean Jeep CJ3a, 2nd owner, owned by the seller over 50 yrs.
SBC 350, Turbo 400, Spicer 18 transfer case, Warn overdrive 25%,
Dana 30 front, fresh Dana 44 rear
(new bearings, gears and LSD), Warn winch, big brakes, clean paint, good tires, and new dual fuel tanks. Upholstery and carpet is 4 yrs old with very little use.
Can be seen by appointment in Fresno CA.
You don’t see many like this one for sale. Odometer just rolled over last week, perfect starting point for the new owner”
This sounds like it needs some work, but unclear the scope needed.
https://portland.craigslist.org/clk/cto/d/brush-prairie-1950-jeep/7670067054.html
“The Jeep was a project for our father who was dealing with some family health issues. This Jeep was like a model he had in the early years. We had a local shop do what I would describe as a makeover. They cleaned and painted the interior and visible exterior surfaces. They made what repairs were required to make it run and drive. In the process we replaced the canvas top, seats, gas tank, tail gate, starter motor, emergence brake kit among other smaller items.
The family enjoyed seeing him driving the Jeep on our property and it was a great distraction for all of us. If you’re interested in a project like this, the makeover we did would be a great first step towards a restoration project. There is the usual body erosion to deal with. The original engine, running gear and steering gear will require repairs to some degree.”
Seller doesn’t appear to know what they have or what it is worth. My guess is that it has been sitting there a while. Value unclear.
https://portland.craigslist.org/mlt/pts/d/gresham-49-jeep-willys/7666835790.html
“Selling for my brother in law. No idea what I’m selling.”
I feel like we’ve seen a jeep with a similar top that is or was for sale.
https://www.facebook.com/marketplace/item/697927085170328
“CJ3a project vehicle. It is very complete and fairly straight. Minimal rust. Has pto winch on it. Not running, NO TITLE!”
UPDATE: Price dropped to $5200.
(07/15/2023) This one has some mods.
https://www.facebook.com/marketplace/item/1439337639962836/
“Oh1953 Jeep CJ3A Four wheel drive Buick V6 Runs and drives Good project vehicle Pink slip in hand”
Quentin’s got this jeep and parts. He notes that “Shipping for any of these can be arranged through Fastenal at Ogdensburg New York 13669″. Contact Quentin via P# at 343 777 4971 or by email at quentin.wyne @ trufficulture.ca (remove spaces from around the @).
1. 1952 CJ3A – Asking $12000 USD. Located in Ottawa Ontario Canada.
2. Newgren lift, frame only. , tag number 3625 $750 USD
3. Monarch Hy Lo pump. (not the one in this image, but exactly like it.) $75 USD.
4. PTO Rear Gear Box with Companion flange to drive shaft. $500 USD
5. Rear Draw bar set up for early CJ5, but will fit 2A and 3A. $100 USD
No title. Has some rust.
https://www.facebook.com/marketplace/item/202394672674728
“1950-52 Jeep CJ3A, runs , new suspension and carburetor, plow , some parts, 1949 Jeep CJ3A for parts, no paperwork”
This has a fiberglass body that I’m guessing was made on the east coast. I’ve seen a few of these. It has the wide rim around the back and a slight angle to the dash.
https://www.facebook.com/marketplace/item/976316976948231
“CJ3A military windshield, V6 engine, turbo 400 transmission, stretched to 12 inches, 1973 renegade rears. Mileage unknown”
Lacks an engine, but still may be worth a look.
https://www.facebook.com/marketplace/item/1253607305338356
“1952 Willy’s flat fender sand jeep selling it as a Roller, which means No Motor so don’t ask if it runs. Has a built power glide trans shifts firm with no hesitation. All gauges work, all the switches on the switch panel work. Will come with the electric water pump and fender well headers for your motor. Is set up for a Small Block Chevy. If you have any more questions please message me if your interested. Do not have a title will provide bill of sale”
Unclear how much value is here. Thanks to TJ for spotting it.
https://www.facebook.com/marketplace/item/1362661867979640
““Barn find” last year licensed 2001. Set up as tow vehicle. Has a Buick? V6. Needs gas tank, seats, tires and brake job. Has been barn stored since 2001 until recently. Sound body and frame”
UPDATE: Still Available.
(08/21/2023) This has a variety of updates.
https://www.facebook.com/marketplace/item/604883465089690
“1949 jeep willys good condition 4 wheel drive works high and low. Good tires. Radio works and heater works also comes with a top and doors for winter time.”
UPDATE: **SOLD** Was $1500.
Seems like there should be some value here.
“The Willys on left is a 1950 The Willys on right is 1959 is running and has a 4 Cylinder hurricane engine , has only the front drive shaft  and title in hand for the 1959. The 1950 has a great body doesn’t have an engine and has front and rear drive shaft and comes with bill of sale”
This is likely a 1948 CJ-2A, but not 100% sure.
https://www.facebook.com/marketplace/item/658446376253951
“PRICE IS OBO (O MEJOR OFERTA) New Carburetor, New Radiator, Distributor, Brake Boosters Runs and Drives”
Runs, no brakes or title.
https://www.facebook.com/marketplace/item/971068804215052
“Willys jeep for sale🎉 (Do not have Title) Engine runs great and transmission is also great condition. Needs new water pump, battery, and will eventually need new tires. (Do not know mileage) Brakes do not work. This is a manual transmission.”
This looks to be a CJ-3A based on the drain gutter on the front of the cowl under the hood. No description provided.
This has an aluminum body and a Ford 4cyl engine.
https://www.facebook.com/marketplace/item/847814566707531
“Cool project hand built body out of aluminum don’t know much about it hit me up with cash or trades ”
Only the one pics provided.
https://sfbay.craigslist.org/scz/cto/d/watsonville-1949-willys-cj3a/7656714941.html
“1949 Willy’s CJ3A .older restoration. Power steering tucked under hood appearing stock outside except for wheels, 11 inch disc brakes front, 11 inch drums in rear. Stock running gear. New wiring, gauges, rubber parts,fuel system, brakes. New tub, absolutely no rust. Was lots of fun but time to let it go. Sits in barn most of the year. 8k B/O”