UPDATE: **SOLD** Was $1500

This seems a great price for a good looking CJ-5.

“61 willys jeep 2” lift rebuilt 225 v6 @ transmission, 8000 lb. pto winch $1500.00 “

This looks like a nice cage.  The body looks in pretty good shape as well.  Includes a  front clip as well.

“1970’s jeep tub and front clip with newer frame. full cage and windsheild. Sorry no title. Was race jeep at one time. Great project has not been cut up. Please phone calls only!!!!!!!!!!! No email axcess. (509) 990-2730 front clip is sanded and ready to paint.”

http://spokane.craigslist.org/cto/961042186.html

It appears the front end is slightly f&*$ed up.  I’m pretty sure those front wheels should be going the same direction.  If you have a front end, this one might be worth snatching up as the seller sounds like they might be will to deal to get rid of it.  Maybe it’s just a broken tierod?  It appears that might even be a terra tire on the front left.

“I’m selling a 55 Willys. I bought it for 1200 I don’t have the time or the money to fix it. I need to sell fast. any question please call me 360-318-5755 1200 obo”

http://bellingham.craigslist.org/cto/941023243.html

Brian sent in this find.  He notes that CJ-5s like this in the midwest are hard to find without being plagued with rust.  As Brian note, it’s also likely to have the offset 30 spline axles.

“1971 CJ5 V-6 MOTOR 3 SPEED TRAN MILES UNKNOWN SPEEDO CABLE BROKE AT THE SIDE OF TRANS, THESE ARE THE WORKING ITEMS ON THE JEEP, FUEL GUAGE,LIGHTS,WIPERS SLOW SPEED AND FAST, HEAT LOW AND HIGH, TURN SIGNALS, LOW AND HIGH BEAM LIGHTS, WHATS THE BAD, CRACK IN WINSHEILD SPEEDO CABLE THATS IT. WHATS BEEN DONE TO IT WHILE I HAD IT, SANDED TO RIDE SOME RUST FULLY PRIMED AND PAINTED, ITS NOT A PERFECT PAINT JOB, BUT LOOKS GOOD AND CLEAN….”

http://detroit.craigslist.org/cto/934233661.html

UPDATE:  It turns out this ad is spam.  Thanks to Allen for discovering this.

“The exterior of this vehicle is VERY GLOSSY, dent free and Very nice all around! The interior is also Very nice and Clean! The condition of the body is Excellent.These are great cars and this one will give many years of reliable service. And super gas mileage !! Tires and brakes are excellent. It has just been inspected..all is fine.Im selling this car cheap anticipating a quick sale.Please email me anytime with any further questions at  MatthewBaker@vanmail.us.”

http://eastoregon.craigslist.org/cto/920454612.html

UPDATE: **SOLD** Was $1000

“I have an ’81 JEEP CJ5 for sale and it comes with a bikini top, good tires, 4speed, golden eagle brown, new spare tire, new brake master cylinder, new clutch master cylinder, new water pump, new thermostat, new heater coil; it drives nice all it needs is some TLC. So if you are a JEEP lover then come and get this one of a kind Jeep.”

That’s a good looking CJ-5 for only $1500.

“1968 – BUICK V6 ENGINE, 3 SPEED MANUAL TRANS, DANA 44 REAR, RUNS GOOD. WASHINGTON REGISTRY TITLE. Needs some work but runs and drives. Need to sell! Must fix my wrangler.”

http://portland.craigslist.org/mlt/cto/903214288.html

I don’t see any obvious issues with this CJ-5.  This appears to be a great price.  Minor note: the year in the title of the Ad differs from the year in the description.

“1964 willys jeep runs great serious inquireies please contact george at 360 275-2761”

http://seattle.craigslist.org/kit/cto/905976373.html

Yeah, it appears there’s some rust.  But, if it runs well, this may be a good find for someone.

“4-wheelin’ Rock ‘n’ Roll. Large V-6, 4 wheel drive. Mag wheels, roll bars, tow bar. *$1250 or Best Offer! Please call: 253-310-3823”

http://seattle.craigslist.org/skc/cto/896003229.html

This CJ-5 has got some great extras for jeeping, including posi front and rear, full cage, dual tanks and more.

“CJ 5 Jeep 1966. 4 speed, Chev. sm. blk. 4-sp./ 4 barrell carb. Full roll cage, bimini top. Bucket seats. Tilt wheel, stereo. Possi- front and rear. After market wheels. Headers. Call 503-740-7396 or 360-835-5467”

http://portland.craigslist.org/clk/cto/892377435.html

This early CJ-5, first year of production, appears very stock and in good shape.

“Rare 1955 Willy’s jeep with a flat head 4 cylinder engine. Manual hubs, high low transfer case, & 3 speed transmission. Was grandpas old jeep but after he suffered a stroke the jeep just sat in the garage for years. Now that he’s passed the jeep has become my responsibility & is not a restoration project I have time to complete. The jeep does run! Please call Casey the owner & make an offer @ 541-742-5915 or myself the computer gu-ru for more pictures through the e-mail.”

http://bend.craigslist.org/cto/892593407.html

It’s a parts jeep, but with new springs and CJ-7 disc brakes, it’s likely a great deal for the right person.

“’55 Willys “round fender” CJ-5,Body & frame with CJ7 disc brake axles, new rancho springs,tow bar, rolling chasis is towable, $500.00 / OBO – Contact Jim @ 541-292-4623 or email – additional photos by email on request – Tnx”

http://medford.craigslist.org/cto/885824612.html

UPDATE: **SOLD** Was $2950. 

“Jeep, 1980 Army (NATO) jeep with 17,000 miles 8,000 lb. winch, new canvas top and new mud and snow tires 6 cylinder, Army auto hubs. Runs great I got it directly from the army at the old Lowery bombing range when they shut it down $2,950.00

UPDATE: **SOLD** Was $1000.

For $1000, looks like a decent project.  Tires and rims look good, body appears pretty good, top looks in good shape.

“1964 Willy’s Jeep Project, no engine in the jeep at this time, but has (2) engines that come with it. (1) 4 cyl. with bad crank and new carb. (1) Buick v6 engine runs great. Has tranny in it. Has an older PTO wench.
Good vinyl top and doors. Nice looking wheels and ok MUDTRACK steel radial tires. Overall decent looking jeep (BLACK) for the year Pictures available upon request $1,000.00”

There’s 2 jeeps and lots of parts.

“64 Willys Title In Hand. Rebuilt 225 V-6, And Rebuilt 3 Speed Tranny, PTO Winch, xtra fuel cell as well as fuel tank under seat. Newer soft top, Newer seat’s, New Carburator, New wirering harness still in the box that needs to be installed, New Altinator still in the box also, 6 point roll cage, need a fuel pump. Master Cylander needs replaced ( Aka: NO BRAKES )Lots Of xtra parts twin stick transfer case. And Also with all of this I have a 73 CJ5 Part Jeep ( NO TITLE ), 225 V-6 has two dead cylenders needs rebuilt. Rolling Chassy $4000.00 For All Or Posibly Part out Or Seperate Please call 303-913-4586 Ask for Thomas Or 303913-4592 …. ”

http://rockies.craigslist.org/pts/861554030.html

This trail jeep seems reasonably priced.

“Selling my trail rig. It is street legal but I trailer it around. It has a built 360, T15/D20, d44/d30 locked in rear, New custom drivelines, 5in of lift (used to be S.O. w/36’s I lowered it back down) 33″ wildcats with spare. 10klb Warn winch with remote, Cd player, Full roll cage, I have the soft top for it, but it needs a little sewing work done (its all there though). It has all the lighting you will ever need, Engine runs at about 80-90psi oil presure. Oversized radiator means it never overheats on the trail. The is an awsome trail jeep. I just dont have time to use it anymore…. Les T. 253-905-5500”

http://seattle.craigslist.org/oly/cto/837551548.html

Some re-assembly likely required 🙂

“Mud Racing jeep with a small block Chevy. Make an offer and you can have it!!!Ran when parked about 5 years ago!!!! Call make an offer and its yours!!!!!!! 214-2834!!!!”

http://montana.craigslist.org/cto/835996009.html

There’s lots of value in this collection of parts.  It’s worth a look if you are putting updating a flat fender.

“’55 Willys “round fender” CJ-5, Buick V-6, Turbo 350, Dana 300,CJ7 disc brake axles, rancho springs, painless wiring harness, GM tilt column, tow bar, Advance Adaptors install kit for V-6 and trans, rolling chaisis is towable, needs assembly – $750.00 / OBO – Contact Jim @ 541-292-4623 or email – photos by email on request – Tnx”

http://medford.craigslist.org/cto/835393238.html

This is one of the stranger CJ-5s I've ever seen.  While the cage won't be sold with the jeep, it's not exactly a good advertisement for the kind of custom cage they are offering to make.  You gotta see all the pics to really appreciate this one.

"1953 Willys ready to finish your way or we can custom build to specs. We have various axels, motors, transfer cases, and trannys. Cage inside and rims do not go with rig. We can also custom build bumpers, tire carriers, cages, sliders to your original design. Or take it as it sits and restore. Tubs is in great shape no major rust. make offer. 406-887-2858"

http://montana.craigslist.org/cto/812578816.html 

The body on this looks straight.  I doubt there's been many changes to it.  This might be a nice restoration project.

"1960 running and driving cj-5, 134 f head motor, 3 speed transmisson, just serviced at oil can henerys (200.00) all fluids changed, 32×11.50×15" tires on newer 15×8 wheels, very reliable, title in hand. 1800.00 or best offer or trade for honda cb, cafe racer, yamaha xs, interceptor, kz 1000 police, or other street bike. may consider trade for vw bug 1970 and earlier. 541-490-3044"

http://portland.craigslist.org/mlt/cto/798897013.html 

The price will likely drop for this project, but the pictures suggest the seller is right:  This looks to be a good base for a project jeep.

"1969 CJ5 Jeep $3,500 Or Best Offer. Great start on an excellent jeep. Clear Oregon title, new mandrel bent box tube frame, new Rubicon Express springs, shackles and spring plates, small block chevy motor with turbo 400 transmission, locker rear end, complete tub that was media blasted with replaced floor and fire wall to fit motor. Has canvas top with doors and the wind shield is in excellent condition. This is a great foundation for anyone wanting to build a jeep. Contact Joe at 971-244-2755"

http://portland.craigslist.org/mlt/cto/786938691.html