Jordan spotted this one. The body isn’t perfect and there are a few minor mods, but it looks in pretty good shape and includes an overdrive. It’s being sold by a dealer: http://newhavenautosales.com/
CJ-6 Research Archives
1956 CJ-6 Project San Diego, CA $10,200
UPDATE: Still Available.
(07/16/2019) Lots of time and money in this. Still more to do.
https://sandiego.craigslist.org/csd/for/d/san-diego-1965-cj6-jeep-4×4-classic/6988177174.html
“Complete frame off restore/mod 1965 CJ6 Jeep! Lots of amazing upgrades and work, not to mention $$$ (Receipts for over $18K in just parts/service!) has gone into this Jeep. I have almost all parts to complete it with a few exceptions. The pictures speak for themselves, but I’ve also listed more details below.
What it has:
>>>Zero rust!
>>> All Steel tub taken completely off and sandblasted, repaired, painted with POR on the underside, Raptor liner inside.
>>>Frame also sandblasted and treated with multiple coats of POR
>>>New front bumper with Superwinch 9.0
>>>New rear bumper with tire carrier.
>>>Custom built Currie Dana 44’s front and rear (86 CJ7 axles, 30 spline axles 3” housing), OX Lockers in front and rear, 4.56 gearing (All put together by MIT Drivetrain.)
>>>1988 Chevy 4.3L V6: Completely and professionally rebuilt by Wholesale Machine.
>>>T5 Trans, Dana 300 transfer case off an 86 CJ7, both rebuilt professionally by MIT Drivetrain.
>>>Advance Adapters headers.
1970 CJ-6 Eugene, OR **Status Unknown**
UPDATE: **Status Unknown** Was $4950.
Runs and drives, but needs work of some kind.
“Rare Jeep CJ-6! Runs and drives decently. Does need some work. No soft top. These Jeeps aren’t easy to find.
The Jeep CJ-6 features a 20-inch longer wheelbase than the CJ-5. Around 50,172 had been made when the series went out of production completely in 1975. Read Less”
1958 CJ-6 Lyons, CO **SOLD**
UPDATE: **SOLD** Was $6950. Now for sale here: http://www.ewillys.com/2019/11/14/1958-cj-6-san-gabriel-ca-9000/
This CJ-6 has the King Seeley 0-8 speedo with the broken pointer (not uncommon to see them broken). I’m surprised to see that speedo in a model as late as 1958, so it wouldn’t surprise me if this was actually an early 1957 model sold as a 1958.
“1958 Willys CJ6 Jeep For Sale.
4WD, original 4 Cylinder engine, full metal hardtop.
Just serviced with new battery, oil and fuel filters, distributor cap, rotor, points, plugs, condenser, plug wires, oil change, fuel and coolant flushes, etc..
Very little rust for a 61 year old jeep!
Ready to go. The perfect little “mountain goat” – ranch, cabin or hunting truck!”
1967 CJ-6 Beaverton, OR $9750
UPDATE: Still Available.
(08/19/2019) Appears solid.
https://portland.craigslist.org/wsc/cto/d/beaverton-1967-jeep-cj6/6979463168.html
“There were a limited number of CJ6 Jeep built by Kaiser Willys of which very few are still operating today. This Jeep has had a lot of work performed on it to get it back on the road. The CJ6 was 20″ longer than the CJ5.
The following work has been performed on this Jeep:
New Best soft top
New Smitty Seats
Front brakes upgraded to 11″ Drums
Front wheel bearings and wheel cylinders replaced
New rear 10″ brake shoes and wheel cylinders
New radiator
New HEI distributor
Rebuilt transmission
Remanufactured carb
New clutch and linkage
New 31” all terrain tires
New windshield frame, glass, and bulkhead seal
New wiper motor, linkage, switch, arms, & blades
New steering wheel
Finished a road trip this July from Colorado to Portland so jeep is ready for adventure.
Will consider reasonable offers.
1964 CJ-6 San Ysidro, CA $8500
Appears to have a nice hardtop.
https://sandiego.craigslist.org/ssd/cto/d/san-ysidro-jeep-cj6/6973386088.html
“I am selling a 1964 Jeep Cj6. It is a 4 cylinder practically untouched. I bought this but I find it hard to find time for it right now. It can be a great investment. I have cleaned the inside which I thought had rust is why I bought it at a reasonable price. I am just trying to get the money I have invested in it. It runs, new master cylinder, new fuel pump, clean title. To register in Cal is about $345. It is very simple to work on and parts are plenty since it is the same as a CJ5. Parts are very reasonable. Restored would almost double but cost less. Hate to see it go since last time I saw one in this condition about 3 yrs in Montana for $3500, they have surely gone up in 3 yrs. I may continue to work on it but price will reflect costs incurred.”
1958 Custom Hunting Rig Hockley, TX **SOLD**
UPDATE: **SOLD** Was $8200.
This is a highly modified rig the has some jeep parts (CJ-5 or 6 body?).
“This is a very cool unique vehicle. Well rigged out.
This is a 1958 modified Jeep body built by a professional roll cage shop.
The body was built to fit on a 1994 S10 truck 4×4.
4.3 Chevy V6… Fuel injected… 5 speed
It is not the prettiest but is very dependable… functionable… and rigged out nicely
Drives nice doesn’t pull or shake… steering is tight… brakes are good with nice tires… cruise even works
Tilt column is nice and tight.
Continue reading
1972 CJ-6 Lacey, WA **SOLD**
UPDATE: This has been relisted at BAT (not sure if it is by the original or new owner). Thanks to Chad for spotting it.
“This 1972 Jeep CJ6 was reportedly purchased new from Sanford Motors in Tacoma, Washington and is said to have later remained in storage for 31 years with its second owner. Power comes from a 304ci V8 paired with a three-speed manual transmission and a two-speed transfer case, and the body is finished in President Red with a white soft top over a black interior. The seller acquired the Jeep five months ago, and service in that time is said to have included a new brake light switch, an oil change, and a clutch adjustment. This CJ6 shows approximately 46k miles and is offered with a custom auxiliary fuel tank, a spare set of tires, removed parts, a service manual, and a clean Washington State title in the seller’s name.“
1957? CJ-6 Johnstown, CO **SOLD**
UPDATE: **SOLD** Was $9750.
Has upgrades. The title lists it as a 1954, so the seller isn’t sure why that is.
“Solid jeep, lots of new parts, just added power steering, new wiring, new brake master, new hydraulic clutch, new swing pedals, new tail lights, corner guards, seats (bucket front, bench rear). New heater/defrost, radiator, alternator, power steering pump, clutch, headers (outside frame), exhaust. Just repaired rust in floor pan and structure, repaired tailgate rust, new instrument gauges, new dash cover (hand made/fit), repaired firewall.
This is set up for jeeping, geared really low for off-road, not for highways. I have additional roll bar from CJ7, I was going to use for parts to create front cage at windshield, just haven’t gotten to it.
Paint in poor condition, former owner used bed-liner and rolled on lime green paint, comes off with ease though.
Additional pics available. Will take only reasonable offers.
The wierd thing, this is titled as a 1954, but CJ6’s weren’t made until 1955. VIN starts with 57, so I think that is what it is supposed to be.”
1956 CJ-6 Norco, CA $4000
This is a project sitting on Scout axles.
https://inlandempire.craigslist.org/pts/d/norco-1956-jeep-willys-cj6-350-block/6946454229.html
“1956 jeep cj6 original tub, grill, tailgate. Currently sitting on a scout frame and axles. Has 1 piece front end and full painless wiring kit. Has surface rust. Body is strait except. Rear corners has a 350 block, torque flight 727 auto and dana tcase. No tittle.”
Modified M-170 Body Big Bear, CA **SOLD**
UPDATE: **SOLD** Was $700.
This M-170 body has been modified on the passenger side.
“I have a cj6 or possibly modified m170 tub for sale … Basically a cj5 but 20 inches longer so it would be a great start to a jeep with more room for gear or people or both , plus way more stable on and off road… I have had it for about 7 years and had every intention of building it as I have loved the old cj’s forever but wanted more room for tools and camping gear.
I bought it right after my first kid was born and thought it would make a great family jeep and was going to take the drive train from my other old cj to build it… Sadly after the frame was stolen from my back yard, I put the project on hold and frankly waited too long because now my kids just want to go out in the other jeep so I don’t want to take it apart to build the cj6… It’s got some rust and some dings but its pretty solid…
1975 CJ-6 Hauser, ID **Status Unknown**
UPDATE: **Status Unknown** Was $12,500.
Appears in good shape.
“So Cal Jeep, restored several years ago. 82K original miles, inline 6 cyl engine , 3 speed trans, runs and drives great, 4WD works wonderfully, PS, disc brakes, Bikini top, set up to tow behind motorhome, comes with tow bar. No rust or corrosion anywhere. This Jeep is a show stopper!!”
1962 CJ-6? Watertown, MN $6500
I think this was a CJ-6 that’s been modified.
https://www.facebook.com/marketplace/item/1679005015579431/
“1962 Willys Jeep, Hurricane Inline 4 Cyl, 3 speed transmission, 4×4, Runs smooth, clear title”
1969 CJ-6 Santa Margarita, CA **SOLD**
UPDATE: **SOLD** Was $10,500.
(06/27/2018) Has a variety of updates.
“Restored and refurbished rare 1969 Jeep CJ6,”
1972 CJ-6 Bozeman, MT **SOLD**
UPDATE: **SOLD** Was $13,000.
(01/24/2019) Looks ready for some fun.
“1972 CJ-6 232 I6 New Gas tank, new exhaust, new Warn Hubs Had Dark Horse go through it all. Hard to come by set top. Have the doors also Only know issue is the exhaust manifold leaks, other than that it runs and drives good Toyo 33×10.50 Tires with steel wheels. Tub is great”
1958 CJ-3B & CJ-6 Frame Lancaster, PA $700
This may have some Kelly or Cutlas hubs.
https://baltimore.craigslist.org/pts/d/drumore-cj3b-1958/6929246955.html
“Needs tub, has good running V6 Buick engine. Clutch TO bearing seized on shaft. Also CJ6 frame for parts. Must take both. All for 700$”
1966? CJ-6 Houston, TX **SOLD**
UPDATE: **SOLD** Was $2500.
/Jay spotted this CJ-6. It seems to have potential.
“Selling my 1966 (i think) Jeep cj6. These are pretty rare and i have come to the conclusion i probably will never get to build it. Bill of sale. I do not have a title. It has the 4 cyl motor. Thats all i know when i bought it 2 years ago”
1959 CJ-6 Denver, CO **SOLD**
UPDATE: **SOLD** Was $5000.
It’s got lots of updates.
“1959 Jeep Willy’s CJ6
SOA lift
Black diamond springs
Wagoneer axles
5.13 gears locked front and rear
37 12.50 r15 pit bull rockstar tires
Full interior roll cage
Twin stick T18 tcase
Winters lockout racing shifter
Chevy 350 motor
Th400 transmission
Runs and drives great
Really capable crawler ”
1975 CJ-6 Underwood, WA $8000
UPDATE: Still Available.
(06/12/2019) Needs some work.
https://portland.craigslist.org/grg/cto/d/bingen-1975-cj6-trail-rig/6907008526.html
“My 1975 CJ6 8k OBO
Its got a laundry list of modifications, and she’s basically a trailer queen , but its legal to drive just not a fun long distance rig. I love this rig but I really haven’t driven it in years, I’ve been riding more on my motorcycle
Garaged since 94 ( I’m the third owner )
258 6cyl runs on propane, It has a 30 gallon vehicle tank and accepts forklift cylinders too
winch ( 8k)
Rust free body
Extended fender flares
Slip in ( AKA pin on ) mud flaps for the road
Ford T18 granny tranny ( using Jeep T176 bell housing to mount Ford tranny )
Advance Adapaters adapter mates the IH Dana 20 Transfer case with dual shiffters
37” Hummer ( good year wranglers ) wheels are hummer orignals , “trail Worthy Brand Rock rings ”
( spare tire 36″ gateway mudder on rim mounted on the back ) Continue reading
1963 CJ-6 Temecula, CA **SOLD**
UPDATE: **SOLD** Was $3000.
(06/24/2019) CJ’s got this CJ-6 with some updates for sale.
“Super Rare 1963 Jeep CJ6 . Not many made . Much like a CJ5 but longer in the back . This has good running Small Block Chevy engine with an automatic turbo 350 transmission the rest of the drive train is stock . This vehicle is not currently drivable . It needs a 12 volt battery , radiator , radiator hoses and a steering box”
Year? CJ-6 Waynesville, NC **SOLD**
UPDATE: **SOLD** Was $400.
That’s a rare Kelly/Beck half cab. There is some parts value here.
“I am selling a CJ-6 that I picked up a few months ago. In one of my weaker moments when I evidently thought that I had somehow found the determination to actually finish a project I drove to VA to get this.
Here is what I know about it.
I drug it home and pulled the head in an attempt to unlock the engine, but didn’t have any success.
Continue reading
1959 CJ-6 Cassville, AR $2200
UPDATE: Price dropped to $2200.
(07/28/2016) Check out chain driven winch.
https://springfield.craigslist.org/pts/d/cassville-1957-jeep-willys-cj6/6916690153.html
“I no longer have time for my project(s) 59 Willy’s cj6 jeep running and driving, motor is strong, has strong functional winch, along with 46 cj2a rolling frame, 3speed transmission, 2 stick transfer case, L head engine block seized had a cracked head, have decided to sell my project ”
1970? CJ-6 Madera, CA **SOLD**
UPDATE: **SOLD** Was $1600.
The seller included a pic of the serial number. You’ll note an “S” in the middle of the two number sets. That means it had smog equipment.
“1970 cj6 .v6 Buick factory .all original .very little rust .can deliver.bill of sale only .out of computer at dmv.no smog ever”
1980 CJ-6 Cleveland, GA $1400
Does not run.
https://www.facebook.com/marketplace/item/660048284434770/
“OBO. CJ 6 Jeep has a V8 motor and transmission that is not running. Does have some rust. It would be a great restoration”
1965 CJ-6 Adrian, MI $3500
The body, lacking a fuel inlet on the side, is newer than ’65.
https://jxn.craigslist.org/cto/d/adrian-1965-cj-6jeep/6907527175.html
“1965 CJ 6 Jeep, 4 wheel drive . Good shape and a fun project.”