This was a surprising find. Bulletin 256 by Koenig touted add-ons for the DJ-3A. I can’t imagine many DJ-3A owners purchased a winch. I can’t think of any DJ-3As that I’ve seen with a body extension either.
This was a surprising find. Bulletin 256 by Koenig touted add-ons for the DJ-3A. I can’t imagine many DJ-3A owners purchased a winch. I can’t think of any DJ-3As that I’ve seen with a body extension either.
Not sure how much value is here.
https://www.facebook.com/marketplace/item/2680099778939849/
“1940s Willy DJ3A 2wd dispatcher Jeep. Has engine and transmission. Has column shifter but not hooked up. Body has obvious rust and not currently running.”
This has a few DJ-3A parts on it. Given the column shift, this could have been a convertible. It’s still 2WD.
https://www.facebook.com/marketplace/item/544927796452107/
“1958 Willy’s jeep with a 283 bored 40 over with small cam aluminum intake Holley 600 Vac carb 350 turbo transmission 8inch ford with mini spool 50miles on new motor 2 wheel drive title in hand”
Given the windshield handles, this might have been a Surrey.
https://www.facebook.com/marketplace/item/626283744631982/
“1960 Jeep Surrey, rare vehicle, only 1420 made between 1960-1965, original 4 cylinder flathead runs great, you have to see in person, it’s a put back to original project but has good bones to build on, a restored one like it sold for $48k, don’t have the time or $ to do it”
As reported in this post, in 1962 the Tonka company launched the jeep models many of us owned as kids (and some of us still own as adults). It didn’t take long for Tonka to introduce specialized packaging as well. The August 1962 issue of Playthings Magazine highlighted three different Dispatcher Tonka Toys, with Hatari-themed boxes, that were for sale in the lobby of movie theaters while Hatari played in theatres.
View all the information on eBay
The article appeared on this page:
UPDATE: Price dropped to $12,000.
(01/17/2020) Has a few updates, but a lot of stock DJ-3A Convertible, including the rare air filter. Note also the Kaiser speedometer (has a big K on it, but I don’t know what model used it). It doesn’t look all that bad (better than a new speedo would).
https://www.facebook.com/marketplace/item/164627788316274/
“Rare Find! 1959 Willys Jeep CJ3
I purchased in 1959,
been in STORAGE!!
ORIGINAL paint..RUST FREE
Always in Alabama
12 volts, Less than 20,000 miles”
UPDATE: **SOLD** Was $12,000.
This is a late model convertible DJ-3A that’s has all its convertible top related parts removed. It’s also missing hubcaps.
“Jeep is like new, Frame off restoration in 2002. Perfect for a resort or campground maintenance vehicle or just to take to your local cruise night. 3 spd Manuel on the Column. You will not be disappointed.”
No pics provided.
https://roswell.craigslist.org/pts/d/whites-city-dj3a-2wd-jeep-rolling/7115202508.html
“No body parts included. Includes motor, transmission, 3rd member, steering, gas tank, small bucket of misc. parts and frame. Was running poorly when I parked it 8 or 10 years ago. Tires are bad.”
UPDATE: **SOLD** Was $1700.
The seller’s description suggests this was originally a Surrey DJ-3A. There is some pink on the inside. Appears to be a good price.
“This is a rare Willys Model DJ-3A. Originally was pink with pink and white striped interior. Top is a Super rare steel Koenig Iron Works too from the 40’s or 50’s. It has roll up door windows and window sliders on the sides and a hatch back”
Seller has two jeeps for sale, but not pics of the “1947” DJ-3A (probably a DJ-3A body on a CJ-2A chassis). Seller also has a CJ-3B project for $4000 as shown below.
https://www.facebook.com/marketplace/item/191686408802732/
“Titled 1957 Jeep Willys CJ3B PROJECT, Frame is immaculate..Dauntless v6 engine, all fresh T350 automatic transmission and torque converter, with Novak adapter to twin stick Dana 18 transfer case, updated cj5 axles with disc brakes and s.s. braided brake lines, Brand new in the box B&M shifter that needs to be installed.. headman headers with dual side exit muffler, 3.5in suspension lift, (5) 32×10.50×15 bfg all terrians mchrome CJ7 Laredo wheels with matching center caps, custom spare tire carrier, roll cage, cd player, newer soft top and soft doors.havent gotten this one fired up yet its close.. moving.. no time to finish.. 4000.00 cash.
Several other Jeeps / Rollers / parts available..!! 1946 thru 2006”
What may be a 1948 CJ-2A chassis has a DJ-3A body on it.
https://www.facebook.com/marketplace/item/580068685934206/
“Old WW2 era Jeep! Lots of usable parts! Possible full resotoration? Has engine, transmissions, transfer case, axels etc. working on getting salvage title. Body in rough shape. Hood, grill, dash good shape etc.”
UPDATE: Price dropped to $300. This looks to be the sliding type, based on the additional pic that shows the handle at the front of the door. Technically, this is the DJ-3A version. The CJ-5 version of the top had windows. But, I believe this would fit a CJ-5.
(07/25/2019) There’s some rust on this top, but I can’t tell how deep it is.
https://hudsonvalley.craigslist.org/pts/d/somers-cj-5-hardtop-and-doors/7095069567.html
“Rare model jeep postal dispatch DJ3a hardtop, windshield, and doors
Windshield glass perfect, drivers door glass pefect… tailgate glass perfect…. passenger door glass missing and the door itself is a bit rough”
UPDATE: Price dropped to $6500.
(02/18/2020) This chassis has a approx 1957 (based on the KS 0-9 speedo) DJ-3A convertible body, windshield, and front clip (or at least the grille) on it.
https://sandiego.craigslist.org/csd/cto/d/santee-willys/7095134936.html
“Willys Jeep restored frame off. Fresh v-6 too very clean 8000 or best offer new tires. Please no emails due to scammers texts are fine. Real nice condition”
Looks like this has a 3B or a replacement windshield. Looks to be a post 1959 given the passenger side air intake. Am I just sleepy or does this have an odd heater setup?
https://www.facebook.com/marketplace/item/249721556045204/
“Old Jeep. Needs everything. Delivery possible. In 21625 zip”
UPDATE: **SOLD** Was $1700.
Not sure how much value is here. It’s got plenty of rust.
“Flat Head 4 Cyl. Engine
3 Speed Transmission on the column
Seats in good condition
All original condition
Ran when parked
96000 correct miles
Original title
A real barn find!
$1700 OBO”
UPDATE: Still Available.
(10/16/2019) This looks to have an Szekely APU hood and possibly a DJ-3A body (I can just make out the DJ-3A parking brake hole on the dash).
https://winchester.craigslist.org/pts/d/bluemont-1947-willys-jeep-project/7083676648.html
“1947 Willy’s project
On a 1969 jeep chassis with mounts set up for the 1947 body.
327 Chevy motor
Dana 18 transfer case
1969 jeep axles
A bunch of other new and used parts.
The fenders, hood, body, etc is not bolted to the frame. I just set them on for the pictures.
I was planning on buying a new steel tub for it or you can fix the one it has. It comes with a title.”
UPDATE: **SOLD** No price provided.
Jim spotted these jeeps for sale. They were listed as part of a garage sale last month, but the ad is still up so maybe some or all the jeeps are still there. I’ve included a pic of the FC and of what appears to be a former airport baggage handling DJ-3A.
See how the passenger rear side is flat on top and angles toward the back? Examples: http://www.ewillys.com/2018/03/07/dj-3a-airport-baggage-handler/ & http://www.ewillys.com/2016/11/20/year-dj-3a-albuquerque-nm-1500/
“Have a few jeeps for sale. B/o
Some run some don’t.
Garage sale at 7 pinewood rd Howell nj 07731.
Sat 10-6
Sun 10-6
Lots of other stuff
More stuff
Chevy trucks
E z dumper
Vw bug
Lawn mowers.”
Despite it’s wretched shape, there’s some useful parts on this convertible DJ-3A (not $1500 worth though), including remnants of the convertible top, a topic about which we DJ guys would like to know more.
Thanks to Nick for spotting this garage sale. It occurred last weekend, but maybe some jeeps remain. The FC has potential. The yellow DJ-3A appears to have been a cargo loader.
https://newjersey.craigslist.org/for/d/howell-willys-jeeps/7066405763.html
“Have a few jeeps for sale. B/o
Some run some don’t.
Garage sale at 7 pinewood rd Howell nj 07731.
Sat 10-6
Sun 10-6
Lots of other stuff”
This has a DJ-3A body and front clip. It may be a DJ-3A chassis, as it appears to have the rear tank in back. So, it may have a DJ-3A that has been converted to 4WD.
https://www.facebook.com/marketplace/item/293802601591842/
“Frame s/n 10248 good condition, no title, no motor, front and rear propelled axles with drive propellers, T90 transmission, model 18 transfer case, shift levers damaged, by previous owner, both cases will need to be gone thru for possible repairs. Body has holes in flooring and in hat channels, but can be readily repaired with just a little mig welding skill. 4 good CJ rims, axles roll easily. Also offering a CJ2A early block, s/n 23555 if not wanted, will deduct 200$ from 800$ total! Block has no cracks, face original never resurfaced, no pitting on head gasket surface area.”
UPDATE: **SOLD** Were $300.
After a closer look, it appears the serial number makes the DJ-3A a 1962 (#56337 22581).
“Here’s a rare 60/40 or split front seat out of my 1964 DJ3A. It needs restoration or recovering. My DJ3A was a surrey originally and you can see the original pink and white stripes under the tan. Frame has been repaired at some point. Perfect for your surrey restoration.”
UPDATE: Price dropped to $850.
(12/30/2020) This DJ-3A has been chopped a bit. I’d have to guess that the front axle has been added to the DJ chassis. It looks like the rear axle is a standard 4-lug DJ axle.
https://www.facebook.com/marketplace/item/149711186670249
“I have a 1956 Willys . Roller no motor are trans . Vary solid starter has 30117 on dash . Asking $900”
UPDATE: More pics and new link.
(The ‘GPW’ appears to be the one with the DJ-3A convertible body on it (brown).
https://tucson.craigslist.org/pts/d/los-lunas-jeeps-early-parts-flat-fender/7054645858.html
“I have a lot of Jeep parts for sale. Mostly CJ3A stuff, but other stuff too. Call or text .5o5388.893l.
Axles, Fenders, Grill, Hood, tail gates, Transmissions, Transfer cases, Tool Box lids, Steel Hard top, Soft top frames, flathead 4 engine parts, M38A1 Frame, trailers made from jeep truck beds, lots of small stuff, etc.
Also 3 complete running Jeeps for sale…..
1. 1968 CJ5, no rust, original V6, heater, runs good and powerful. 5k
2. Ford GPW, titled as a 48 Ford, runs like a top, original GPW flathead 4 cylinder motor, California Black Plates, No rust. 6k
3. 1949 Willys CJ3A, converted to small block Ford V8, Borg-Warner overdrive. Runs. 5k”
UPDATE: **SOLD** Was $3000.
Appears to have a DJ-3A body with an early KS 0-10 speedometer.
“1947 willys jeep. 4cly 3speed 4wd.new tires,brakes,lines.fuel tank and much more.runs and drives great.”
UPDATE: **SOLD** Was $150.
Looks like a good price for these hard-to-find items.
“Hub Caps and Headlight Rings for1957 Willys Jeep. Good Condition, original. $150 for all”