Mike shared an interesting document. This January 5, 1958, Service Bulletin discusses a wagon side-panel heater installation.

This is supposed to be an original document.

View all the information on ebay

“1950 Original Willys Four Universal CJ-3A Tune Up chart by AEA, (Not a Reproduction). Both sides are shown in the photographs. The photos are of the exact item you will receive Measures 8.5 x 11 inches, two-sided single sheet.”

Mike shared this June 18, 1962, Willys Motors Service Bulletin that has an updated 1000-mile inspection checklist. It’s both a handy checklist for the inspection of your current vintage jeep or for use when checking out a new jeep.

PDF Version of Checklist
(or an Alternative Checklist create by a reader years ago)

Below are there additional Meyer-related Installation, service and instruction documents. First is four-page Form No. I-318R for installation of Meyer Power Angling:

Next is Form No. 1-119R9 for installation of snow plow lifts powered in several different ways:

Continue reading →

These there documents should help someone service their ElectroLIft units for the Meyer Snowplows.   Neither has a date, but I would guess these are close to 1960.

There are two ElectroLift control types, one mechanical and one electrical, so make sure you know what type you have. This first form provides installation instructions for the mechanical type. It is Form Number 1-101. Page 2 shows only. a partial electrical diagram. I’m not sure why only the partial diagram shows.

Continue reading →

The following Monarch hydraulic schematics and parts documents were included in the Meyer products binder. Hopefully, they will help someone out when rebuilding one of these units.

1. This first page covers the Monarch Hy-Lo Hydraulic Power Control Type UHT-JA. It is dated August 01, 1959:

2. The next page covers the Monarch Hy-Lo-Jack Hydraulic Power Control Type HFC-5. It is dated August 01, 1959:

Continue reading →

Below are Meyer plow install instructions and parts lists for various Jeep models, including CJs, trucks, wagons, FCs, and J-series jeeps.

First up in the  two-page Form No. 1-103r5 for the CJ-2A-CJ-6:

Next is four-page Form No. 1-109r6 for trucks and wagons:

Continue reading →

Chris has posted some jeep parts and items on eBay. Here’s a link to his items:

https://www.ebay.com/sch/elijah12012/m.html?_nkw=&_armrs=1&_ipg=&_from=

One of the more interesting items is this jeep logo placement poster:

This contains a variety of parts information, including “models 67/71 Jeepster, 62/71 Universal, 72 & 73 Commando CJ DJ 5 6 (various open body, fire engine, gas, diesel, convertible, roadster, station wagon, full cab, pickup, half cab, etc.” So, it might have some interesting info.

View all the information on eBay

“Item Description: Original Jeep Dealer Parts Catalog, 1962 – 1973, with original reddish heavy 3 metal post binder “American Motors / Jeep Parts Catalog”. Covers: models 67/71 Jeepster, 62/71 Universal, 72 & 73 Commando CJ DJ 5 6 (various open body, fire engine, gas, diesel, convertible, roadster, station wagon, full cab, pickup, half cab, etc.). Illustration and Text, parts only, no price list. About 4″ thick. September 1974 print date. Good for looking up NOS part numbers. Good condition, light wear, metal and edge darkening, scuff, small plastic tab on binding edge 1″ top gone. Item has reddish covers, pages are whitish color (camera error kept trying to correct color to reddish background). Inside printing all good condition.”

UPDATE: **SOLD (fast)** These were on eBay.

These are copies, but are priced as such. I’m sure they would be interesting to someone. They ship from GB.

“Over the years my interest in British ww2 airborne troops has been high, and amongst my collection I converted my jeep to full glider-borne specifications
The drawings I used were from originals which I copied and give full details on the placing of parts and how to make them, with measurements and good details
They’re on A3 paper and come as 10x sheets. They cover:
Pannier carrier
Spare wheel carrier
Bonnet ammo carrier
Steering wheel quick release
Front bumper
Positioning of parts in the jeep
Jerry can carrier reposition
Radio aerial/battery carrier base
A frame for towing”

I thought I would win this auction, but I didn’t bid quite high enough. It looks like an interesting book. The guy who sold it on eBay said he used it to build a “bullet proof” AMC 360 engine. This book was printed in 1993.

Here are the pics posted on the auction:

There are three different auctions for FC-170-related PTO mechanical drawings.

1. 1963 FC-170 PTO Drawings $29.95:
   Excellent Condition
   Mechanical Drawing
   ‘Jeep’ FC-170
   PTO INSTALLATION
   923931
   Measures about 21 ¼ x 11 inches and folds to8 ½ x 11 inches
2. 1960 FC-150 PTO Drawings $39.95:Mechanical Drawing
   WILLYS MOTORS
   FC-150 P T O INSTALL
   This original Mechanical drawing measures about 21 ½ x 11 inches
   Dated 9-16-60
   
3. 1960 FC-170 PTO Drawings $39.95:
   “Mechanical Drawing
   WILLYS MOTORS
   FC-170 P T O INSTALL
   This original Mechanical drawing measures about 21 ½ x 11 inches
   Dated 9-16-60”