Still has plenty of good Buick 225 parts.
https://www.facebook.com/marketplace/item/2426329497444533/
“Frose up make and offer have a 4 speed trans that’s also frose up make and offer or trade for Willys parts”
Still has plenty of good Buick 225 parts.
https://www.facebook.com/marketplace/item/2426329497444533/
“Frose up make and offer have a 4 speed trans that’s also frose up make and offer or trade for Willys parts”
Seller provides a detailed description of the engine.
https://www.facebook.com/marketplace/item/2369925726576970/
“This is a willys L134 Engine, short block. Not sure the year of the engine, it was removed from a 1948 Willys CJ2A.
Pros- Ran great when pulled, I have a video of it running. Great oil pressure, also have a video.
Block is solid, I can not see any cracks or leaks. It has been rebuilt at one point in its life, the cylinders sleeved back to stock standard 3.125” dia.
Only what you see in the pictures is included in the sale. All internal components are in the engine. Head, Carburetor, Fuel Pump, oil filter canister, oil filler tube not included in the sale.
Cons – One of the exhaust manifold bolts is broken off. One of the pistons has a chipped edge on the top groove, see picture. No shipping local pick up. $450.00 or Best offer, Cash or PayPay only. Thanks for looking, please message me with questions or requests for more pictures or videos. I am parting out (3) Willys so if you need other parts let me know what you need and I’ll see if I have it. L134″
Prices range from $150 to $400.
https://newlondon.craigslist.org/pts/d/bozrah-jeep-willys-engines/6957970573.html
“I have 4 F134 Jeep Willy’s Engines for sale. I assume all will need a rebuild, 2 turn by hand. One is missing the oil pan but the other 3 are mostly complete”
No pics, but this sounds like a good price if you want an upgrade over your existing engine. I’d put this in Biscuit if it weren’t so far away.
https://asheville.craigslist.org/pts/d/asheville-chevy-ii-cyl-engine/6959241104.html
“Chevy II 153 4 cylinder from 1962/63(?). The motor has been built as a high performance engine…has a 4 bbl intake, dual point distributor, header and (I think) the big valve head. Runs great and had it in an old Jeepster but replaced it with a V6. Seem to be hard to find as a lot were scooped up and built for dirt track racing. Ran fine in the Jeepster with good oil pressure and no over heating (has new water pump).”
<– Day 9 Aug 10: Primitive Camping | Day 11 Aug 12: All Good Things Come to an End –>
The crew spent the day doing some more exploring of Newfoundland. They began the morning on the beach at Gander Lake. It ended at Gros Morne National Park.
Gander Lake proved to be a beautiful place to begin the day.
While the beach is a romantic spot to camp, it’s not all that flat. So, Joe and Bill had to get creative with their equipment in order to have their beds passably level.
UPDATE: **SOLD** was $250.
Maybe someone can use these.
“134 cu in L head (flathead) out of a 1948 CJ2A. The motor is disassembled and has been checked out by a machine shop. The bore is currently .060 over, crank mains are .030 and the rod journals are .010. The block and head have been dipped and painted. I took two motors to the machine shop and had them pick the best parts to rebuild one motor. The leftovers are all usable. Motor still has to be rebuilt. Motor block with head, crank, cam and piston rods, oil pan, flywheel, manifolds, water pump, fan, and what you see in the picture.May trade, need a Weber carburetor.”
UPDATE: Status Unknown. Was $700.
This looks like a good price.
“NEW pistons, rings, valves, seats, bearings, dam, timing gears, previous owner passed, engine has not been started since rebuilding and has not been in vehicle since rebuild includes bell housing flywheel clutch”
UPDATE: **SOLD** Was $1000.
Jon shared this link. I wonder if that’s Canadian $$?
“Willys cj2a complete engine with alternater, ran great when pulled has fly wheel”
Has a crack under the distributor, but perhaps it could be patched/welded/sealed.
https://charlotte.craigslist.org/pts/d/shelby-willys-jeep-cj3a-flathead-4/6913344812.html
“Willys Jeep CJ3A engine as pictured. Serial number starts with 3J but can be used in other Jeeps. Has casting flaw or hairline crack under distributor. Engine turns over. Pick up in Western NC unable to ship. $300”
UPDATE: **SOLD** Was $200.
Maybe some value? Looks like it ran some kind of pump/generator/?.
“illys L-134 GO DEVIL engine , near complete . Good for parts might be a good block , won’t turn over but oil on the dip stick looks decent . I believe this is a CJ model and not G503”
UPDATE: Status Unknown. Was $300.
“This is from an early CJ 2a or cj3 Jeep from 1946 to 1955 era. Sitting for long, will need to be rebuilt most probably. AS IS
MUST PICK UP AND BE ABLE TO LIAD ON A PICKUP.’
UPDATE: **Status Unknown** Was $750 per engine.
Quite a collection of engines.
“Four Willys F-134 Hurricane four cylinder engines. All turn over and are complete (starter, generator, carburetor, and distributor) $750 each Email with needs as other parts are also available..”
UPDATE: Status Unknown. Was $800.
Maybe someone can use these?
“4 Willys engines for sale. I bought them for my project but I sold it and now I have to get rid of them. F4-134 Hurricane engines. What you see is what you get. You pick up.”
UPDATE: **SOLD** Was $500.
This Super Hurricane engine could be a good price.
“1962 Willys Wagon engine. Excellent condition.”
Mike share this link. It’s disassembled. The eBay ad includes a make offer option.
View all the information on eBay
“It was disassembled when we got it. Was told it is complete. There are parts everywhere. Tried to picture what I knew goes with it. If there is anything else you don’t see please ask and we will look for it. 100% WWII engine. I am guessing 1943 based upon the serial number but not sure. Stand comes with it.
Willing to ship at buyers expense or can drop off within a certain distance. Please contact me about shipping.”
UPDATE: **SOLD** Was $875.
Given the serial number, this appears to have been rebuilt at some point.
“Jeep CJ-2 Willys Industrial L134 Go Devil Engine Powered a Hobart Welder.
Model CJ2-A
905997
s/n RJ293377”
UPDATE: **SOLD** Was $600.
Appears worth a look.
“Complete 134 L head motor. From fan blade to bell housing and all accessories (starter, generator, rebuilt carburetor, original air filter, etc). Comes with tune up parts, gasket kit. Was a running/driving motor until it was pulled last fall. Stored indoors since then. Call for more details if interested.”
UPDATE: Status Unknown. Was $450.
Maybe someone can use this.
“Have a old willys motor that came with the jeepster i bought. Don’t need it”
Might be worth a look.
https://sacramento.craigslist.org/pts/d/citrus-heights-us-military-army-willys/6882914848.html
“Willys M-38 Army Jeep L134 engine, no cracks, complete block, head, pan, was running three days ago”
These might interest someone.
https://binghamton.craigslist.org/pts/d/harpursville-willys-jeep-motors-1-flat/6835468727.html
“I have 3 jeep motors all turn over $ 500.00 for all three, I think two will run.”
May be worth a look.
https://providence.craigslist.org/pts/d/exeter-willys-jeep-motor/6840033113.html
“Supersonic 4 cylinder flat head with manifold and water pump”
UPDATE: **SOLD** Was $800.
Runs. Appears in good shape.
“Selling a Jeep Flathead 4-cyl engine. This is WWII surplus. The engine has been covered, and still runs.”
UPDATE: **SOLD** Was $350.
Has a WWII head.
“Don’t turn, pick up as is if you can use it get it now.”