No description.

http://stlouis.craigslist.org/cto/4536265735.html

UPDATE: **SOLD** Was $1500

(12/08/2012) I don’t have a manual in front of me, but I’m pretty sure the radiator mounts in a slightly different spot.

“Selling a Jeep Willys for a friend, please call the listed phone number and ask for Doug, he has all of the specific information on this vehicle if you are interested.
The Jeep does run, plow works nicely and it has a crane jack on the back. The Jeep can be sold with or without the plow and crane.”

UPDATE: **SOLD** Was $3500.

Run, drives and stops.

“UP FOR SALE AGAIN..PREVIOUS BUYER BACKED OUT….CAN BE SEEN AT EAST COAST WILLYS RESTORATIONS IN SILER CITY
RUNS DRIVES STOPS NEED SOME BODY WORK BUT IS IN GREAT CONDITION HAS 4 CYC F-HEAD IN IT”

No pics provided.

“1958 Jeep; FC-170 Restorer or parts rig.No engine or transmission,Frame mounts for Chev. small block.Body has some rust but definitely not terminal.It has possibilities but is a project.Clear Washington title.”

http://portland.craigslist.org/clk/cto/4522747256.html

UPDATE: **SOLD** Was $750.

Looks like it has parts value.

“I have a 1956 FC-170 Forward Control Willys Jeep with a flat bed. It is 4 wheel drive with a 6 cylinder engine. The engine is not running, something is broke inside. It only turns over so far and stops. I’m asking $750.00 or OBO. I have the title to it.”

UPDATE: Make Offer.

(05/30/2014) Does not include tow boom.

“For sale or trade is a 196 ??? Willys Jeep FC150 Cab Forward pickup. Not sure the exact year, title is in safe deposit box, and will have to get. The Transmission was taken out prior to my buying it, unknown why possibly clutch ??? Trans is in the back. I have not had this vehicle running. The windows are out, and I have them. Will accept best cash and or trade offer. Feel free to come see it, as many others already have. Clear Nevada title.

Note !!! The tow boom does NOT NOT NOT go with the sale. It will be pulled off prior to competion of this sale. 

I am selling this because I have to many projects, and because of so many calls on this vehicle when people saw it in the back ground of other vehicles that I have listed.”

http://reno.craigslist.org/cto/4494147522.html

UPDATE: **SOLD** Was $17,000.

Here’s an unusual setup.

“Custom 61 Willys Jeep! Everything New on this Beast ! Come see it for yourself !
350 Chevy Motor Bored over with Holley Double Pumper less than 2000 miles ! 
Lots of custom fabrication on this truck ! This is a One of a Kind HotRod ! Lots of Chrome ! Stacked Exhaust ! Have Receipts! Serious Inquiries Only Please ! Mama says its time to Let it Go ! 
Will Trade for the Right Vehicle ! Tell me what you got !”

UPDATE: Was $2400. **Status Unknown**

Nonrunning project.

“ bought several of these cool, pug-nosed Willys Jeep FC170s, FC150s and a BUNCH of related parts to get the stuff I want/need for my own project. This one is rough, but in my opinion, restorable. I’ll sell this truck complete (with title), or will consider selling parts for the right price.

This is considered a 3/4-ton pick-up with a Dana 44 closed-knuckle front axle, and a Dana 53 rear axle. The truck rolls free (axles/brakes are NOT locked up), and the drivetrain (engine/transmission/transfer case) is still installed, although I have no idea as to the mechanical condition. Engine is the Super Hurricane inline 6-cylinder mated to a T90 3-speed manual trans.

The frame looks good on this truck, and the cab appears to be repairable, although it’s arguably rough (common for Midwest vehicles of this vintage). Someone retrofitted what appears to be a ’50s GM dash into the truck, and did a pretty good job doing so. If you’d prefer to go back to a stock dash set-up, I have interior parts available.

NOTE: Parts in the rear of the truck will be cleaned up before it’s sold.

I have a few FC170 vehicles available, along with a nice FC170 rolling frame, a couple FC cabs (one FC170, and one FC150), and lots of parts. If you’re looking for a custom project, consider putting one of these classic FC cabs on a late-model chassis, much like I’m doing with my project: http://www.pirate4x4.com/forum/jeep-non-hardcore/1558953-jeep-fc170-patina-rod-mutt.html

Located in Cedar Springs, Michigan (49319), just north of Grand Rapids.”

http://grandrapids.craigslist.org/cto/4512800342.html

UPDATE: **SOLD** Was $1950.

(05/14/2014) This has a 4-speed and a hydraulic lift. Doesn’t sound like it runs.

“1964 Willys Jeep FC 150 was originally a flatbed truck. This truck had a very limited production in only nine years. It was not even listed in NADA guide books, they had never heard of it! They are now adding it to their 2014 September model update. They were originally built on the same frame as the CJ 5 so it has a wheelbase of only 81″. This truck also has a rare hydraulic lift for the bed and the rear counter weight which is also rare. It has a Hurricane 4 engine which is stuck from sitting, but has been soaking in Marvel Mystery oil. It has a 4-speed Borg-Warner T-98 manual transmission. The front axle is a Dana 27 and the rear is a Dana 44. Does it have rust? Yes, it is a 1964 so it has rust in the typical places, but this truck still exists. These trucks are becoming harder and harder to find. “

UPDATE: Still Available

(05/16/2014) It’s been disassembled, but still appears to be a good price.

“1962 FC 170 with snow plow and Stahl utility box bed. No longer a priority project and letting her go. Please review video. DISASSEMBLED. Cab, chassis, and bed separated, all else in storage shed.
$1000.00 you load and haul away. have signed title previous owner.

http://youtu.be/rt6Oh_GbV-o, http://youtu.be/k3aJv4g9Jto, http://youtu.be/F41349p84Rw

http://washingtondc.craigslist.org/mld/cto/4485791926.html

Here’s what it looked like assembled:

UPDATE: Still Available

(05/17/2014) These are being sold as a pair.

“for sale 1957 willys jeep fc150 with western snowplow and it even has a parts book to them the other one has a tilt bed and a winch great project sold as a pair both run”

http://nmi.craigslist.org/cto/4465430036.html

UPDATE: Still Available. It runs.

“willys pickup year?
huricane 4
frame solid
exterior rust
with plow”

http://westernmass.craigslist.org/cto/4477404405.html

UPDATE: Was $600. **Status Unknown**

Seller has other FC parts coming up for sale, too.

“ picked up this 1961 Willys FC170 truck in December to use the cab for a custom “Patina Rod” project I’m working on (build thread here: http://www.pirate4x4.com/forum/jeep-non-hardcore/1558953-jeep-fc170-patina-rod-mutt.html). I have since bought — as a “package deal” — several FC150s and FC170s, and will be using one of those for my project instead.

I do *not* have a title for this truck. The cab is rough, but has GREAT patina and vintage/retro “Dan’s Snowplowing” graphics (the truck had been parked in the St. Ignace area for decades, it appears). The closed-knuckle Dana 44 front and Dana 53 rear axles are locked up (brake drums, I’m certain), and the frame is thin in some areas. This is most likely a “parts truck” more so than a “restore candidate”. That being said, the cab could be fixed by someone with the right skills.

The glass is all in-tact, with the exception of the driver window being cracked. The (rare) windshield is in-tact, but has some scratches from the wiper arms, and a small stone chip (I believe a local glass place could repair both). There are only one or two companies in the U.S. that offer windshields (about $480 shipped). Both door windows roll up & down well.

The engine, transmission & transfer case are still in the vehicle, but haven’t run for years…condition is unknown.

Buy this whole rare Jeep for $600, or make an offer on parts (I’d prefer to sell complete). I will have several other FC parts/vehicles available very soon.”

http://grandrapids.craigslist.org/pts/4488240416.html

UPDATE: Was $100. **SOLD**

Glass looks good.

UPDATE: Was $3200. **SOLD**

“FC-150 Jeep 1962 Forward Control Jeep Pickup. This is a very rare great shape restorable vehicle! Original Hurricane F134 overhead 4 cylinder gas engine, three speed transmission, transfer case, Dana 44 axles

Drove it around in high and low case about 2 years ago. The drive train worked great but the engine needs some work.

The body is mostly rust free except typical cab corners, etc. Removed vinyl trim around inside windshield corners, some typical rust. Windshield and door windows glass cracked. Extra parts – front bumper – drivers door – etc. The fan ran into the radiator and needs fixed.”

UPDATE: **SOLD** Was $2000

(05/14/2014) Hasn’t run in a while.

“Classic Jeep, needs restoration. Restoration had been started many years ago, but hasn’t been worked on for sometime. I am unsure if the transmission or engine was previously worked on. See pictures. These are pretty rare jeeps, I am selling because I don’t have the time or space to restore it. Email if interested. We have equipment on site, will need to be loaded onto trailer for transport. Clear Michigan Title.”

UPDATE: **Status Unknown** No price was listed.

No pics provided.

“hi i have a 1963 jeep fc170. this is a project but very hard to find. have all parts. email phone number and i can text you pictures. thanks”

http://inlandempire.craigslist.org/pts/4477914857.html

UPDATE: Status Unknown. Was $3300

Runs, but needs some work.

“!!! VERY RARE 1961 JEEP WILLYS FC150 4×4!!! Great Project for any TRUE JEEP Lover. This is a 1961 Jeep Willys FC150 4×4. This is a flat nosied jeep that was used mostly up North and not in the Florida area. You would have a very hard time finding this truck in Florida. I bought it from the original owner and had to have it shipped from South Carolina. This is a great truck which turns heads every time I open the Garage. Truck RUNS but needs body work, good solid wood bed. I bought the truck to restore it but have not had the time to put into it. This would be a great Ratrod Truck or restoration project. If you are looking for that one of a kind truck that everyone asks “What Is That” this is the one.”