UPDATE: Still Available

(02/24/2014) It’s definitely a project.

“Here is a unique project vehicle. 1958 3/4 ton Kaiser Jeep FC-170 Forward Control Pickup. I’ve had this since 2000 but several other projects have taken priority. I have several 4×4’s and was considering turning this into a slammed 2WD cruiser truck, but I now need to thin the herd. This is a pretty solid starting point. Set up for a small block Chevy/TH400. They have been pulled but are still available for additional cost. I traded original 9′ bed for a beat up one, intending to use the base to create a flat/stake bed. All 8 pieces of glass intact except for passenger door window, which is easy to have made. Comes with additional NOS windshield with rubber included ($500 10 years ago) Also comes with these add’l parts: front fiberglass fender flares, set of 5 stock wheels with zero miles roller tires, pair of stronger Chevy axles- corporate 10 front w/discs, 12 bolt rear, both 4.56 gears. (or upgrade to pair of 3/4 ton Dodge 44 HD front w/flat knuckles for xover steering/ Dana 60 full float rear, both 8 lug 4.10 gears), set of steel 8 lug wheels. 327 Chevy small block w/TH400 negotiable. Clear title, pink in hand. $2,500 w/o options.

I also have a ’65 Jeep Wagoneer in another ad.
Ed 7sixzero six8five 44onefive”

http://sandiego.craigslist.org/nsd/pts/4381756908.html

UPDATE:  **SOLD** Was on eBay (in 2016 listed in Colorado)

“1960 WILLYS/JEEP FC-150 Project for the 4×4 person looking for that special vehicle with a great look. Sits 9′ tall and has 44″ ground hog tires; 400 ford motor; automatic trans, power steering. tilt steering , steering has shimmy. 9″ ford rear end and chevy blazer front end, but missing front drive shaft , heavy duty front bumper with mounting area for winch, duel exhaust . Cab has some rust areas. Have new gas tank not installed and ram and pump to make bed a dump if wanted. Cab tilts with hydraulic hand pump but needs hold downs for cab.Tags are up to date and title is clear. Truck has been sitting for long time but ran back then ,will need fuel system and brakes gone thru”

UPDATE: **SOLD** $1400.

It looks like there’s some parts value here.

“I have for sale OR POSSIBLE TRADE two (2) FC 150’s w/titles. Make offer or would possibly trade for a good Willys truck w/title. Mostly testing the waters for what is out there as far as Willys trucks go, but would possibly sell for the right price.”

UPDATE: **SOLD** Was listed at $1800.

(02/25/2014) Engine is locked.

“I hate to part with this jeep but due to unforeseen circumstances I am letting it go. This long box (9 feet) 3 ton, Jeep is very restore able. Engine is a straight 6 hurricane Flathead, locked but complete. FC170 four wheel drive with title.”

UPDATE: **SOLD** Was listed at $1100. Ran when parked.

“For Sale: 1957 Willy FC-170 pickup.
It’s in need of a full restoration. It ran and drove when we parked it at its last storage spot.
The body is complete as is all the drivetrain.
It has a plow installed as well.
I have a clear title for it.”

UPDATE: **Status Unknown** Was ‘Make Offer’

“Hard to find 1958 and 1960 Willys Jeep Cab forward pickups, cab and numerous parts for restoring. Seller is extremely negotiable on price, even better price if you take everything!”

UPDATE: **SOLD** Was $3200

(02/09/2014) It’s a project.

“Up for sale is a 1957 Jeep FC150 project truck With an AMC 360 V8. The axles and transmission, transfer case are from a Jeep Wrangler. This is a project it is not complete needs work to be finished. It does run, move and stop . I am selling because I have lost interest in the project and I figured I would see if anyone is interested in it. I am not desperate I would just like to see it go to some one who will finish it. If I can’t get a reasonable offer I will finish it myself.”

Doesn’t run.

“Rare 1960 Jeep FC 150. Does not run needs full restoration or use for parts. Please call six15 four 85 four four o9 Thanks. $1000.00”

http://nashville.craigslist.org/cto/4335919778.html

UPDATE: **SOLD** Was $1200.

There looks like value here.

“1957 Jeep FC150 FWD
with after market dually wheel set up.
4 cylinder Jeep Engine. 3 Pieces of Stake bed in place”

UPDATE: **SOLD** Was $1000

(10/16/2013) Looks like some good parts there.

“rare fc150 for parts or restoration. not running some parts missing, was Bellvadere fir dept. truck. $1000 offer or trade for ?”

UPDATE: Still Available

“FC170 cab over jeep Fair condition Missing flywheel- has cracked windsheild Have clear title $1500.00 Also have ford 1/2 ton 4X4 running gear with C4 auto trans with transfer case $600.00 Will sell both for $1500.00 Call 1360 9210678 NO TEXTING”

http://portland.craigslist.org/grg/cto/4324081717.html

UPDATE: **SOLD** Was $3500.

(12/13/2014) Both are projects.

“I have two Willys FC170’s for sale. I would also consider trading even for a J series pickup truck or a toyota 4×4 truck. I have 3 of these forward controls and I have come to realize I will never fix up all 3 of them. I am keeping the one I have the most money and time in and letting the other 2 go. They are projects and I have not messed with either of them or tried to get them running. They are both fairly complete with enough to make one complete truck if you combined the two easily. The orange truck is in really nice shape body wise (if I had got it first I would have used it as it is worlds better than what I am working with). The green truck has some body damage but its not very rusty either. Both are flathead 6 with the t90 three speeds and dana18 transfer cases. Green one is 1959 and Orange is a 1960.”

UPDATE: **SOLD** Was $800

This runs!

“Runs good needs a water pump and radiator just rebuilt the carb it has a three speed transmission with all time 4wd it has high and low”

UPDATE: **SOLD** Was $2850.

It needs some parts.

“No engine or transmission very little rust, windshield has a nick in it. rear glass good, door glass cracked. awesome wheeling project. Tim Allen just paid 40000 for a completely restored one in Arizona. clean colorado title”

UPDATE: Was $3500. Status Unknown.

“When was the last time you saw one of these ? Original drive train , flat head super 6 / three speed , full time 4×4 , low neutral high transfer case with PTO . Minimal rust , very low on rear cab corners and drivers floor . 7.50/16 deep lug tires , like new. Cool old truck – the only reason it’s for sale is to raise funds for a 46 Chevy COE wrecker project.”

UPDATE: Was $2500. Status Unknown.

“Up for sale is our 1957 Jeep FC170, forward control. This was to be a project for my son and I but the body work is over our head. This truck is highly collectible and complete, everything is here including a new windshield and service manual. This is a 4wd vehicle with locking hubs in the front. The engine is the 6 cylinder with a 4 speed manual transmission and 2 speed Dana Spicer transfer case.

This would make a great father and son project, or can be used for parts. The body is extremely rusty and will need extensive work. I’ve attached as many photos as possible so that you can see everything.

We would consider a trade for something of equal value, possibly another Jeep CJ, Wrangler, Land Cruiser, Trooper, MG, sports car, Triumph, or other 4×4.”