Features Research Archives

To Top

1960 CJ-3B Ambulance Spokane, Wa eBay

• CATEGORIES: CJ-3B, Features, Fire/Police/Industry Vehicles • TAGS: , .

UPDATE:  Back on eBay

(03/25/2011) This is cool!  I found pics of a similar one on the CJ-3B Board from Macedonia.

“1960 Jeep CJ-3B Ambulance. It runs and drives. Imported from Turkey. Orange in color. doors still work. Needs fuel tank. Awesome and rare restoration project. Pictures tell it all. Email with any questions. Thanks”

View all the info on eBay

Continue reading

 
To Top

Reader Builds: Some Jeeps out of Hawaii

• CATEGORIES: Builds, Features • TAGS: .

UPDATE:  I’m running short of time tonight, so here’s a post from a couple years ago.

Here’s Frank’s flattie and some friends of his who have flatties as well.  The picture with multiple jeeps was from a run last October.  The next time you are vacationing in Hawaii, keep an eye out for these good looking jeeps.

frank_rodrigues1

frank_rodrigues3

frank_rodriques2

 
To Top

Unusual Willys Bugish thing from Cuba

• CATEGORIES: Features, Unusual

Ori forwarded me this image take by Danny Koro during a visit to Cuba.  You can see the ‘Willys’ stamp on the hood, which indicates the hood has been trimmed.  It sure is unusual.  You can see more info about the post here: http://www.carsforum.co.il/vb/showthread.php?t=372206

 
To Top

Eurpoean Junk Pile

• CATEGORIES: Features, Old Images

I spotted this image at several sites, but the largest version I found was at edinburghnapiernews.com.  I’m gonna guess, based only on the building in the right corner, that this pile of vehicles is somewhere in Europe.  Strangely, this image is used as a header image for an article on the importance of recycling and freecycling. And I think the image is supposed to reinforce the importance of recycling and the problems of waste.  I believe the irony of the use of this photo with the article is that these vehicles were in fact piled as a first step in their recycling process (for their reuse in steel).

 
To Top

Updated Verion of Lawrence’s Bellcrank Mod

• CATEGORIES: Features

Lawrence just finished adding his bearing mod to this newer bell crank for a customer.  He’s been working on jeeps for decades.  If you would like this done for your bell crank, let me know (d@ewillys.com) and I’ll provide his contact information.

 
To Top

Unusual MB found on Flickr

• CATEGORIES: Features, Old Images, Wood bodies • TAGS: , .

Here’s an unusual MB that I spotted on Flickr. I don’t remember seeing it anywhere else (but sometimes my memory isn’t all that good!).

 
To Top

A nice looking ‘Follow Me’ Slat Grille

• CATEGORIES: Features, Fire/Police/Industry Vehicles, MB • TAGS: , , .

Jeremy found these images as part of a great folder of jeep images touring Facebook.  You can learn more about them at Brian’s Military Jeep site.

 
To Top

“Will Work For Jeep Parts”

• CATEGORIES: Features

Chris spotted this funny shirt.  The Shirt says it all!

You can order them here on eBay

 
To Top

Willys Jeep Song

• CATEGORIES: Features, videos

HOG spotted this unusual ‘Willys Jeep’ song, which is a rewrite of Queen’s Bicycle Race song, over at Kaiser Willys Blog.

 
To Top

I Want a Rocking Jeep!

• CATEGORIES: Artists/Drawings, Features

Alex spotted this illustration of a rocking jeep a long time ago.  Thanks for sharing it.  I think these would sell . . .

 
To Top

A Cold Winter!

• CATEGORIES: CJ-2A, Features

This frigid CJ-2A suffered through consecutive days in the 20s in Columbia, South Carolina, this winter.  It was snapped on January 7, 2010 and published at wunderground.com.

 
To Top

Pounced: Biscuit Finally Has Its Name

• CATEGORIES: Biscuit, Features, How To

It was sometime around mid-summer of last year (maybe earlier) when I started the project to place ‘Lost Biscuit’ on the hood of my jeep. It took a little longer than expected, but I finally did it.
First I had to decide which font to use. Fortunately,  I got some very helpful input along the way from Dexter (thanks) and eventually decided upon the Marker Felt font. Okay, that was pretty easy.

Now, how to get the name on the hood. After hmming and haaaing over how I wanted to attach the name (hand drawn, stickers, stencils, pay someone else … ), I finally decided I would do it myself using paint.  But, I knew my freehand drawing and painting skills froze around the 2nd grade, so this wasn’t something I could improvise. Since I had no immediate solutions, I decided to put the project on hold (which explains the delay).

One day this past December I was watching American Restoration on the History Channel.  The American Restoration show is a spinoff of sorts from the Pawn Stars show and follows various restoration projects from Ricks Restoration out of Las Vegas.  In one of the episodes, called Buttered Up (you can view it here), Rick restores an old popcorn machine.

To repaint the front of the popcorn machine, the painter used a technique that dates back centuries called pouncing. Pouncing? My ears perked up!

Pouncing?  Never heard of that. As usual, my computer was on my lap so I instantly googled pouncing.  I learned,

Pouncing is where pounce — loose graphite or charcoal — is rubbed through a series of small holes punched in a paper pattern to transfer the design to an item to be decorated

Well, I thought that would work for Biscuit’s name.  After some more research, I found out that quilters use pouncing for some stitch patterns.  So, the next day I hit some quilt stores.  As you can imagine, the conversation went something like this,

“Hi, I’m here because I want to paint a name on my jeep,” says I.

Blank stare from cashier, “what do you need?”

“I need stuff for pouncing” says I, remembering now that I probably had not shaved, maybe, not even showered, and most likely wasn’t quite dressed like customers they normally help (however, to my credit, I didn’t have on my garage jeans).

Another blank stare, “you want to do what?” I think she even had her finger ready to dial ‘9’ (and then ‘1’ ‘1’)

It turns out, not everyone knows what pouncing is, even at the quilt stores.  Eventually, after visiting a couple quilt stores, I found what I needed (you will see my pouncing supplies in a picture below).

Here’s the synopsis of this project.

1. Design and Print the template.  Then, since I didn’t have a good awl, I created my own awl out of tape, a chopstick and a long push pin.

2. Next, I attached the template to a piece of cardboard.  Then, I poked holes around the outer edge of all the letters.

3. With the letters outlined, I tested out the template on different materials to make sure it worked.  It turns out pouncing is pretty easy!

4. Selecting paint was the next step. So, I visited my local art supply store and explained to them what I wanted.  They directed me to an Acrylic Titanium White Tube from Windsor Newton. Along with the paint, they also suggested an acrylic spray on sealer and finisher from Americana. I took the paint home and tested it on different materials.  At first, I didn’t like it, because it wasn’t as smooth as the typical oil based house paint I had expected.  Instead, it had texture like a canvas artist would want.  But then, after staring at it a bit, I warmed to the texture, because it gave the name a hand generated feel.

5.  Yesterday, with the weather a little warmer, it was time to paint the name.  I got out my template, my paint, and my pouncing supplies.  I taped the template to the hood and prepared to pounce.

Over the course of my tests, the technique I found most successful for pouncing was not tapping the pouncer, but rather dragging it slowly across the holes.  This kept the paper from popping up and blurring the dots underneath.

The pouncing equipment consists of a pouncer with a ‘handle’ on one side and a soft side on the other.  There’s also a plastic container that can hold pounce.  Lastly, there is the white chalk.

6.  Now it’s time to paint.  I put three coats on each side. This image was taken after the first coat.

This is after three coats.

There is still some small edges that need cleaning up.  Once I do that, I’ll spray it and hopefully that will protect it!

 
To Top

More on this unusual CJ-?A/MB Wagon in Bali

UPDATE:  Rudolf sent some additional pics of this rig. Steve gives a good analysis within the comments section.

Rudolf forwarded me this unusual CJ-?A/MB wagon.  Rudolf reports that this is titled a 1944 and was used for public transit in Bali.  Given the full floating rear end, the rearend might have been from a MB.  It reminded me of another vehicle with a similar wood rear end that is located in France  (see the red image below).

From France (CJ-3B Page, Offroadaction.ca)

 
To Top

Tavis Highlander’s Wagon

• CATEGORIES: Features, Jeep Rods, Willys Wagons • TAGS: .

Roadmonster.org wrote about designer Tavis Highlander and his wagon last year.  According to the post, his illustrations have been featured in Hot Rod and Car Craft Magazines.  In addition, he illustrated and then built the below wagon, which has been featured in Hot Rod Magazine, Truckin’ Magazine, and Radical Renderings.

Click here to see the entire post at Roadmonster.org

Click here to visit Tavis’s Website with a variety of pics from this build

Here’s Tavis’ concept drawing:

You can see here that this started with a pretty ordinary, rough wagon:

Here’s the completed project.  Click the pictures to see the build process.

Here’s a look at the motor (from Roadmaster.org):

 
To Top

Willys Images from Wikimedia

• CATEGORIES: Features, MB

At some point this image was uploaded to Wikimedia. I thought it was a nice, detailed, large image.  Click on the image and you can check out the details pretty closely.

 
To Top

One more set of pics from the Four Corners

• CATEGORIES: Features, Old Images Jeeping

This is the final set of pics from of the Four Corners from Alan.  I’ll combine these separate posts into one at some point.

 
To Top

1969 CJ-5 w/ Camper Harpers Ferry, WV **SOLD**

• CATEGORIES: Camping, CJ5, Features • TAGS: , , .

UPDATE: **SOLD** Was on eBay

“We have a 1969 Jeep CJ Camper They only made 336 of these  I have found on the  internet there only a hand ful of them left. they are rare as hens teeth. this a V6 engine with a three speed trans. It needs a complete restoration as you can see from the pics. it is being sold on a Bill of sale only it looks to be about 95% complete we do see it is missing some hub caps/ gear shifter knob/ some camper parts/  It did run when parked any questions please call me my name is Dannon”

 
To Top

Builds: 1945 Monster Garage Flattie By Jesse James

• CATEGORIES: Features, Jeep Rods • TAGS: .

If Jesse James and West Coast Choppers were to build a jeep, what kind of jeep would he build?  Well, we have the answer from remarkablecars.com. This unusual build was available for auction in 2008.  I can’t tell if it sold or not.  He did manage to use some original parts.  For example, that left fender sure looks like a WWII fender and there’s some original frame used too (you can make out the transfercase undercarriage mount near the rear tire).

SUMMARY: This authentic WWII Willys Jeep transformed into a twin-engined tractor-pulling behemoth is sure to bring home the Big “V” both on the race track and the front lines. Sold on a Bill of Sale only. Special conditions apply.

DESCRIPTION: In the Summer of 2003, Jesse James accompanied Kid Rock to a USO Show for the troops overseas in Iraq. While there, Jesse was bit by the inspiration bug and set his mind towards his next build, the transition of an authentic WWII Willys Jeep into a twin-engined tractor-pulling behemoth using a team composed entirely of Army gearheads (well, with the exception of a couple of civilian experts). It wasn’t just a walk through the park, or even a walk through the front lines. Nearly every piece had to be fabricated for this build. Plus, the rear end and rims had to be modified for pulling. The biggest modification was comprised of extending the Jeep frame from 86″ to 180″. Over twice it’s original length.

THE DESIGNERS: Jesse James, custom-bike builder/designer, West Coast Choppers in Long Beach, CA, Joe Eder, multi-engine tractor-pull builder from North Collins, NY, Keith Kaucher, industrial designer, Kaucher Design Werks in Santa Monica, CA, Chief Warrant Officer 3 Kevin Sargent, utilities operations and maintenance technician, Headquarters Company/1st Engineer Brigade in Fort Leonard Wood, MO, 2nd Lt. Brian Johnson, armor officer, 1st Battalion/16th Cavalry Regiment in Fort Knox, KY.

THE BUILDERS:
Jesse James, custom-bike builder/designer, West Coast Choppers in Long Beach, CA, Joe Eder, multi-engine tractor-pull builder from North Collins, NY, Pfc. Jesse Dugan, wheel vehicle mechanic, D Company/801st Main Support Brigade in Fort Campbell, KY, 2nd Lt. Brian Johnson/2LT, armor officer, 1st Battalion/16th Cavalry Regiment in Fort Knox, KY, Staff Sgt. Jeffrey Morin, light-wheeled vehicle mechanic, Headquarters Company/187 Ordnance Battalion in Fort Jackson, SC, Tim Porter, single-engine tractor-pull builder from Louisberg, KY, Master Sgt. Darrick Preston, mechanical maintenance supervisor, 16th Ordnance Battalion/Aberdeen Proving Ground in Abingdon, MD, Chief Warrant Officer 3 Kevin Sargent, utilities operations and maintenance technician, Headquarters Company/1st Engineer Brigade in Ft. Leonard Wood, MO and Spc. Benjamin Smith, metalworker, D Company/801st Mechanical Support Brigade in Fort Campbell, KY.

VEHICLE SPECS:
Make: Willys Model: Jeep MB Year: 1943 Height: 64″ Width: 85″ (including rear tires) Length: 211″ Ground Clearance: 6″ to headers (1′ to frame) Horsepower/Torque: approximately 2,000hp /2,1000 torque Moving Parts: Includes the engine coupler, primary transmission, secondary gearbox and dual supercharged 502 engines. Special Welds: The guys performed heavy-duty welds on the body-frame extension and towing hitch. Additional Acquired or Machined Parts: The team fabricated the engine coupler, towing hitch and straight rims.”

 
To Top

1964 King Midget Pt. Pleasant, NJ $5500

• CATEGORIES: Features

Need a car that’s a little easier on gas than your jeep?  How about this one cylinder car HOG spotted.  No, it’s not 4wd and it is smaller than some golf carts, but I figured I’d post it anyway.  Besides, even if you don’t like the car, check out the turn signal/running lights on the front.  Those might be a nice conversion option for older jeeps.

I have never seen a King Midget. There were 3 basic models of the Midget.  The first model was a one seater, like a mini-racing car from the early 1900s.  The second model expanded to two seats, along with other additional options.  The third model increased strength and horsepower.

The King Midget Car website has this video, which shows a variety of old Midgets:

httpv://www.youtube.com/watch?v=HJv0a7dUbIU&feature=player_embedded

“I am selling a 1964 King Midget, “Worlds Most Exciting Small Car”. The car is in outstanding condition and is a A.A.C.A Senior show winner. The engine is a One cylinder, with 2 speed auto trans; the car gets 60-90 miles per gallon! The odometer reads 5,226. If you are wondering, YES, this car is street legal and another interesting fact about the King Midget is that they were only available by mail order from 1952-1970. I am forced to sell the car due to a death in the family and am sad to see this “small” gem of a car go.”

http://jerseyshore.craigslist.org/cto/2299150667.html

 
To Top

VMSB244.com Honors some WWII Vets

• CATEGORIES: Features, Website

Alan has been sharing those great jeeping images from the Four Corners.  He  helps run a website called VMSB244.com where WWII men from the VMSB244 squadron are honored and remembered.  One cool feature is that they have scanned original letters written by the men of that squadron.

 
To Top

Photos from WWII at Ewa, Hi

• CATEGORIES: Features, Old Images

Here are some images taken by Alan’s grandfather during WWII.The first two appear to be a GPW.

Alan writes, “These WWII photos came from my grandfather while he was with VMSB 244 on EWA, HI. The guys would train at Ewa and then go on to Midway and many other Islands during their time in the Marine Corp.”

 
To Top

WWII Jeep at Small Museum in Auchonvillers, France

• CATEGORIES: Features, International, Museums

If you happen to be in France and staying at the Avril Williams Guest House, in Auchonvillers, France, you must take a trip across the street and visit the small museum.  There you will find a set of compact dioramas from several wars.  In the World War II diorama sits a restored MB or GPW of some vintage.

I found a pic of the jeep at this website, which follows someone’s journey through the battlefields of France.

 
To Top

Yakima Ridge Runners Early Jeeping Videos

• CATEGORIES: Features, Old Images Jeeping, videos • TAGS: .

JPZombie has posted several vintage videos on Youtube. Here are a few showing the club in the Naches Trail area west of Yakima in Washington State.

 
To Top

A FC Roundup of my own — My First Ride in a Forward Control

• CATEGORIES: FC150-FC170-M677, Features • TAGS: .

As I mentioned a couple days ago, the FC Round up was this weekend in Arizona.  Well, I didn’t have time to make it down there.  But, that didn’t stop me from having a FC Round Up of my own.

A reader asked me to check out a Forward Control for sale about 45 minutes north of me.  I had some time today, so I drove out to meet with the seller, Daryl, who was awfully nice and very informative.

Well, it turns out Daryl didn’t just have 1 FC, he had 5:  2 FC-170s, an FC-170 DRW, an FC-170 with an expertly extended frame and aftermarket Dually setup, and an FC-150.  Daryl had a story about each one and pointed out some things I didn’t know.  Daryl and his son developed an interest in them a few years ago, brought them home, and hope to get working on them soon.

The nicest one, which Daryl has for sale, runs and drives, so he took me for a ride.  It was the first ride in an FC for me and, hopefully, not the last! We cruised up the road a bit, then cruised back. I had hoped to take a video, but the video on my phone stopped working (turns out it was operator error, but I didn’t figure that out until later).

He said he didn’t mind if I posted a few pictures, so here they are.  Thanks for a fun afternoon Daryl!

Here’s a shot of their collection:

Here’s an FC-170 that was used for years by a farmer to feed his cattle.  But he had a problem, how could he stand on the back of the FC and toss the hay off the back and drive at the same time?  His solution was his custom auto pilot contraption. He would get the Jeep going, attached his ‘auto pilot’ and then climb into the back and throw out hay as he drove along.

This FC-170 DRW has a racheting system to raise and lower the spare tire. I don’t remember ever coming across other FCs with that.  Unfortunately, it was hard to get a great shot of this.

 
To Top

Brian’s 1945 MB on Display

• CATEGORIES: Features

In July of 2010 Brian found a 1945 MB on eWillys which he purchased.  After getting it home and getting some repairs done, he decided that it should go to work for him, so he’s been lending it out for people to use for photos or as a display.   So, many of you have probably seen pics of jeeps doing just about everything, but have you ever seen it used to sell books? I thought it was a great idea!

Brian writes, “I’ve actually rented the jeep out already to people for photos and display use – it all helps with the costs.  I recently rented it to be on display at a Book Launching (Surviving Your Serengeti by Stefan Swanepoel) attended by over 10,000 people.   There are also more photos from their book launch and people around my jeep at the Author’s facebook  http://www.facebook.com/album.php?id=99032510438&aid=332726″

Here are a couple pics: