Features Research Archives

To Top

UPDATE: Slicer and Corral Panels

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

UPDATE: Ann’s family descended upon our place this past weekend. We are only catching up with everything now. The property worked great for the family event and should work great for a jeep event, once we get one organized. 

Earlier this week, we managed to collect all the corral panels Ann won at the auction, including the 24′-long heavy metal fence (with an added 12′ foot gate). With the help of a tractor bucket, I was able to carry it home on our 18′ trailer (Dave, we’ve put those straps you’ve sent us to good use!). 

While loading the gate, a man came by in a truck to check on us. It turns out, he is the owner of the auction facility (Mr. Booker of Booker auctions). He asked where we lived and we said Prosser. Given he’s a long time resident of the Tri-Cities, I jokingly asked if he knew the former owner of our property in Prosser, Merlin Brown, as he was a bit notorious around these parts. Sure enough, somehow Mr. Booker had met Merlin while camping one time. Mr. Booker noted, “I thought I was a pretty good bullshitter, but that Merlin, he was over the top”. 

2022-09-27-gates

Meanwhile, in “slicer” news … I discovered that when I plugged in the slicer, it didn’t work. After dissembling the power box, I found the power lines weren’t attached to anything (see lower left circle and arrow).  Why didn’t they at least cap or cut the ends?

2022-09-28-slicer

After some discussions with my uncle, we figured out that the former owner (Walmart) must have disabled/decommissioned before selling it by pulling the wire the power wire between the cord and the board (likely a safety thing). So, after unable to find any schematics online, we made and educated guess and I wired the hot and common wires to the board near that lower arrow on the left. Viola, it now works!

I also discovered one of the foots was an incorrect length (by half an inch see upper right arrow above), making the slicer unstable. It took a while to find at our local ACE store, but I finally found another 4″ metric Phillips bolt to properly adjust the footer to the correct length. 

========================

Originally Posted Sept 23: Ann’s family will be here this weekend, so the next updates will likely be Monday. So, we’ve been busily tidying up the property, inside and out. However, we did sneak away on Thursday to pickup some items Ann won at a local auction.

The principal purpose was to buy some corral panels (we couldn’t justify buying new ones at $200+ per panel), scoring about 200 feet of 12′ long panels at a great price. But, she also spotted a meat slicer for sale at the auction.

Ever since working at restaurants, I’ve always wanted a quality slicer, but it’s hard to justify the purchase. So, Ann surprised me by winning an auction for a Bizerba GSP HD 13″ slicer! Plus, it came with a stainless steel cart. Priced new (to my surprise) without the cart at between $4k-$7k. Meanwhile, a stainless cart goes for a minimum of $1500 all by itself. So, I was pretty shocked that she snagged the slicer plus a cart for less than $600.  I’d say she scored!

2022-09-21-bizerba-slicer2-lores 2022-09-21-bizerba-slicer1-lores

 

 
To Top

1974 ACME Jeep Poster

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

I finally found a good price on one of these ACME Jeep posters, so I snagged it. I’ll get a better pic of it when I get a chance. It is 29″ wide x 23″ tall.

1974-Acme-poster

 
To Top

The Qualls’ Cross Country Adventure Part I

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.
qualls-roadtrip1

Randy Qualls is on the left and Carson on the right. Here, they are just entering Arizona.

Randy and his son Carson are currently part way through a cross country trip in two flat fenders. Their journey began a few days ago in Jacksonville, Florida. Their western destination is Ventura, California. From there, they plan to drive back, heading slightly farther north through Utah and Colorado, before angling back south towards Florida. They’ve been documenting their trip on Facebook: https://www.facebook.com/ P?id=100085873092539

Here are a few pics.

This is a map of their route. They are currently in Arizona driving west along the yellow line.

qualls-roadtrip9-map

From Florida, they drove to Alabama, but had a few mechanical issues at one point.

qualls-roadtrip8-alabama

Then on to Mississippi:

qualls-roadtrip7-mississippi

They got caught up in some rain, but that didn’t stop them:

qualls-roadtrip6-rain

Soon, they were in Arkansas (cool stickers ;-)):

qualls-roadtrip5-arkansas

Eventually they hit Texas (and likely had good weather from there):

qualls-roadtrip4-texas

They’ve are equipped to camp at night:

qualls-roadtrip3-oklahoma

Continue reading

 
To Top

Jeep Station Sedan Model

• CATEGORIES: Features, Models This site contains affiliate links for which I may be compensated.

This rare Jeep Station Sedan model came from eBay. This seems to be a pretty rare item (I’ve never seen another one). Given the Station Sedan was produced in 1948, I imagine the model is from that year as well.

1948-jeep-station-sedan-model

As a reminder, here’s the color scheme for the Jeep Station Sedan:

Photos

 
To Top

Kubota V2203 Engines Battle Ground, WA $2200

• CATEGORIES: Engine, Features • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(12/04/2020) At the bottom you can see a video of a Kubota V2203 from a refrigeration unit installed in a flattie. You can learn more about this swap at overlanddiesel.com.

https://portland.craigslist.org/clk/pts/d/battle-ground-kubota-v2203/7574258337.html

“Engine will be strapped to a pallet.
These engines are easily swapped into Jeep’s, bobcats, or even used for standby generators. Perfect for projects

I can send a video of the engine running or you can come check it out.
Contact with any questions you might have.
These V2203 engines can be swapped in place of older V1902, V1903, V1702, V1703 models.
D1105 will include an inline electric fuel pump

All you need to run these are fuel and a battery. Fully mechanical. Fuel solenoid can be removed and blocked off, or you can wire into ignition power. All engines have a manual shutdown lever on the fuel rack.

SAE #4 Bellhousing pattern

If you are unsure if this model will be a direct swap, message me and I will let you know if it will work for your application. Engines are sold “as is” with no warranty.

Conversion kit links;
https://www.overlanddiesel.com/

https://kubotaswappers.myshopify.com/”

kubota-engine-v2203

==========================

Here’s the video of a used Kubota engine installed in a a flattie that I mentioned:

 

 
To Top

Jan 1950 Salesbuilder

• CATEGORIES: Features, Magazine • TAGS: This site contains affiliate links for which I may be compensated.

Finally, another Salesbuilder landed on eBay. This one is from January 1950. One of the interesting things to me was the 12-postcard campaign shown on page 17; I’ve only documented a handful of the postcards.

1950-01-salesbuilder-lores-01 1950-01-salesbuilder-lores-02 1950-01-salesbuilder-lores-03 1950-01-salesbuilder-lores-04 1950-01-salesbuilder-lores-05

Continue reading

 
To Top

1957 FC Brochures

• CATEGORIES: Advertising & Brochures, Features This site contains affiliate links for which I may be compensated.

This 1957 FC-150 Brochure is Form No. CS-4-57. I’m sure most of you have seen this brochure, but I hadn’t documented it. I got it off eBay and it came with an unopened FC-170 brochure Form No. CS 5-57 I.S.B. I’ll think I may have another one of those brochures. I’ll have to check my folders.

This is the front of the brochure:

1957-04-form-no-cs-4-57-fc150-brochure1-1-lores

This is the back:

1957-04-form-no-cs-4-57-fc150-brochure1-2-lores

The brochure opens horizontally:
1957-04-form-no-cs-4-57-fc150-brochure1-3-lores

Then, the brochure opens vertically:1957-04-form-no-cs-4-57-fc150-brochure1-4-lores

Here is the back fully open:

1957-04-form-no-cs-4-57-fc150-brochure1-5-lores

Continue reading

 
To Top

Nick’s Garage Works on a 1947 CJ-2A

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

Nick takes a look at this mostly stock 1947 CJ-2A. Note the unusual location the steering box mod (it does not appear mounted against the frame rail; rather, it is slid towards the passenger side six or more inches. I could only catch a few glimpses of it, such as time stamp 20:01-20:03 (there might be others). An additional cross member was welded between the bumper and the standard cross member, then a support was welded between the new crossmember and the bumper. It’s to that support that the steering box is attached.

 
To Top

Steve Magnante Video: CJ-5, Rollovers, and Other Info

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

Mike shared this Steve Magnante CJ-5 video about the later model CJ-5s. The CJ-5 portion starts at the 0:56 mark.

 
To Top

1959 Truck & Wagon Model Comparison Brochure

• CATEGORIES: Advertising & Brochures, Features This site contains affiliate links for which I may be compensated.

UPDATE: This may be the early version of the Value-rater. An updated version with 1960 dates was reportedly published in 1960 according to the March 1960 issue of Jeep News, page two.

This ebay brochure find is not one I’ve seen. Form No. 59-17, it details comparisons between jeep models (FC-150s, FC-170s, Wagons and Trucks) and the competition. I’ll update it with the real pics when I receive the brochure.

1959-17-comparison-brochure0

1959-17-comparison-brochure2 1959-17-comparison-brochure1

 
To Top

Jeeps and Parts @ Estate Sale Victor, MT

• CATEGORIES: FC150-FC170-M677, Features, Jeepster, MB, Willys Trucks, Willys Wagons This site contains affiliate links for which I may be compensated.

This estate sale started yesterday. It includes a variety of jeeps and a bunch of tools.

https://seattle.craigslist.org/est/gms/7534866000.html

“Come join us for this incredible sale. Starts 8 am Wednesday, September 21st. Check out the flyer in photos for specific vehicle makes, this sale is a doozy. WILLYS JEEP accumulation, several cabover jeeps and jeep trucks. (4) Ford pickup trucks, (2) 4×4 Kubota tractors, lawn tractor, equipment / implements, machinist / metalworking tools, Miller welders, alongside a whole house of antiques, furniture , clothing, sporting goods, and Books. Address will be released on Facebook and our website closer to the sale. Don’t miss this long standing Bitterroot estate going up for sale, keep up on our Facebook for updated photos.
Wednesday Sept 21st: 8am-6pm
Thursday Sept 22nd: 8am-6pm
Friday Sept 23rd: 8am-6pm 25% off
Saturday Sept 24th: 8 am open, 50% off, liquidation AUCTION @ 12pm noon”

jeeps-victor-mt3 jeeps-victor-mt2 jeeps-victor-mt

 
To Top

CJ-5 Koenig Model 555 Half-top Colfax, WI $500

• CATEGORIES: Features, Parts • TAGS: This site contains affiliate links for which I may be compensated.

Tim’s selling this Koenig model 555 half-cab. The doors do not include the window mechanisms. Colfax, Wisconsin is about 60 miles east of Minneapolis, MN. You can contact him by phone at 715 308 3207.

“I recently bought a second halfcab, a Koenig model 555, not realizing that my half-cab does not interchange with it. I have taken the window mechanisms from that cab, but have no use for the rest of it. It weighs almost 300 pounds, and is obviously bulky, even though it is completely disassembled. I can deliver it within reason”

IMG_1282

IMG_1288

IMG_1287

IMG_1286

Continue reading

 
To Top

1957 FC-150 Brochure

• CATEGORIES: Advertising & Brochures, Features This site contains affiliate links for which I may be compensated.

Somehow, I’ve never posted this brochure. I’m sure folks are fairly familiar with it. I’d guess it’s one of the first FC-150 brochures produced, so it likely arrived at some point around January of 1957. It is Form No. W-FC1-CS. It measure 8.5″ x 11″ folded and 25.5″ x 22″ when unfolded.

This is the front when folded:

1957-form-no-W-FC1-CS-1

This is the back when folded:1957-form-no-W-FC1-CS-2

The front unfolds horizontally to show this wide part of the brochure:1957-form-no-W-FC1-CS-3

The brochure unfolds vertically twice. First, these two frames appear:1957-form-no-W-FC1-CS-4

Then another third is folded down to reveal this full view:1957-form-no-W-FC1-CS-5

Here is the back unfolded: Continue reading

 
To Top

David’s Refurbed Knox Trailer

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

David recently refurbished his Knox trailer. Not a lot is known about these trailers, so we are still hunting for information on them. Rather than the standard round fenders, David’s came with some angular fenders, which we assumed replaced the stock round fenders.

Note the mural in the background; OKC is FULL of murals! Here are just some: https://www.camelsandchocolate.com/murals-in-oklahoma-city/

He writes, “I found it on Facebook Marketplace in Hot Springs Arkansas. Quite a drive, but it looked in decent shape. I didn’t know what it was, other than a vintage utility trailer. I replaced basically everything…axle, hubs, leaf springs, taillights, wiring, wood floor, etc. I sandblasted and painted the body Apple Red to match my Jeep. Replaced the 14 inch wheels with 16 inch. Sprayed the inside with bedliner.”

david-okc-knox-trailer1 david-okc-knox-trailer3

david-okc-knox-trailer2

 
To Top

Jeep Shop Parts Sale Oregon City, OR

• CATEGORIES: Features, Parts This site contains affiliate links for which I may be compensated.

Blaine let me know about this sale. The business formerly known as R&P has a big sale on parts this weekend (23rd & 24th). And and I visited the place back in 2014 when it was still R&P 4WD Parts. I’d like to check it out, but Ann’s family reunion is this weekend at our place (think chaos ..)!

https://portland.craigslist.org/clc/pts/d/oregon-city-willys-jeep-shop-sale/7535967277.html

https://portland.craigslist.org/clc/pts/d/oregon-city-willys-pickup/7535961156.html

https://portland.craigslist.org/clc/pts/d/oregon-city-willys-pickup/7535961156.html

parts4 parts3 parts2 parts1

 

 
To Top

Steve Magnante Video on the Hurricane Engines

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

Mike shared this video from Steve Magnante on the Wilys truck and Hurricane engine history.

 
To Top

1948 Jeep Station Sedan Demonstration Manual

• CATEGORIES: Advertising & Brochures, Documents, Features This site contains affiliate links for which I may be compensated.

I missed out on this 16 page very rare Jeep Station Sedan Demonstration Manual on eBay. I wonder if they produced similar documents for other models. Thankfully, the seller posted photos of each page.

1949-jeep-station-sedan-brochure0 1949-jeep-station-sedan-brochure1 1949-jeep-station-sedan-brochure2 1949-jeep-station-sedan-brochure3

Continue reading

 
To Top

Photograph of Modified Jeep

• CATEGORIES: Features, Old Images This site contains affiliate links for which I may be compensated.

This photo of a modified jeep was posted to Facebook last week by Morihisa Ochi on the G503 page. It looks like the custom parts could be taken off pretty easily.

https://www.facebook.com/groups/WWIIG503/permalink/10158379404956046/

odd-jeep-plane-fb

 
To Top

All American Wonder II Painting

• CATEGORIES: Artists/Drawings, Books, Features This site contains affiliate links for which I may be compensated.

UPDATE: Just to emphasize, this is a recreated version of the original painting.

Thanks to Scott for this link. The sale is for a 22 x 28 inch painting made by an artist named Daves from the original version of this image by Sessions. According to the seller, this painting was used as the cover image for Ray Cowdery’s book All American Wonder II.

https://willysforsale.com/ads/the-original-22×28-inch-painting-cover-of-all-american-wonder-ii/

daves-all-american-wonder-II-painting-ray-cowdery

“Here is the opportunity to own the original painting that was used for the by now iconic book on WWII jeeps ‘All American Wonder II’ by Ray Cowdery. The book is a ‘bible’ for any WWII jeep enthusiast and/or restorer. The author had this oil painting made by an artist of the name Daves to resemble a WWII Willys advertising by Sessions. It graces the cover of his book, and this painting is the only original in the world. On the back a large rubber stamp of the author and his former address. It looks amazing, the colors are vibrant, there are of course no holes or other damage. It looks amazing even unframed and will become a centerpiece in anyone’s jeep collection.”

 
To Top

CJ-5 Ashtray

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

Today I only listed one-third of the jeeps I found for sale (and I didn’t look that hard to find them). There are a lot of jeeps out there for sale right now!

In other news, I finally snagged one of these CJ-5 ashtrays off eBay at a reasonable price.

cj5-ashtray-lores-1 cj5-ashtray-lores-2

 
To Top

Jan 1948 Willys-Overland Sales News

• CATEGORIES: Advertising & Brochures, Features, Magazine • TAGS: This site contains affiliate links for which I may be compensated.

Here’s another wonderful early Sales News document saved and shared by Jan. Many thanks to him for these early pieces.

The initial article on the Station Sedan provides some additional history about it’s release and it’s position in Willys-Overland history (first six cal sold since 1932).

Page 7 shows a photo from the Paris auto show with a CJ-2A sporting a unique hardtop. Page 8 includes highlights the aluminum and steel hardtops from Worman. Page 10 introduced the City and City campaign and highlights W-O’s impact in the station wagon market. Page 16 has a photo in the lower-left corner that shows what may be a Woodie Top in action.

1948-01-willys-overland-sales-news-lores-01 1948-01-willys-overland-sales-news-lores-02 1948-01-willys-overland-sales-news-lores-03 1948-01-willys-overland-sales-news-lores-04

Continue reading

 
To Top

Al-Toy Truck on eBay **SOLD**

• CATEGORIES: Features, toys This site contains affiliate links for which I may be compensated.

This Al-Toy truck sold on eBay yesterday for $565.

https://www.ebay.com/itm/374244008832

altoy-truck-ebay4 altoy-truck-ebay5 altoy-truck-ebay6

 
To Top

Been a Busy Few Days

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

Monday I’ll have a regular update …

We’ve had family in town the last couple of days, so life’s been busy. The past week we also picked up Ann’s new Ford F-350 Lariat Dually, which will allow us to do some heavier towing, such as moving cattle around, pulling a tractor with our tilt trailer, and potentially towing a heavier jeep (more on this next month if everything goes as planned).

We happened to get lucky that Ann was at the Ford dealership testing out front seats on Wednesday when the new Dually was delivered from the factory, only to be declined by the person who had ordered it and put down a downpayment. That was good news for us, as there is an 8-10 month wait on these trucks. Ann loved the comfort of the seats, so that pretty much sold the truck. (We had been looking at a Cherry Red Silverado Dually 3500, which we really liked, but the seats weren’t very comfortable).

Here are just a couple pics:

2022-09-09-ford-f350-fx4-lariat-1 2022-09-09-ford-f350-fx4-lariat-2

This past week I also got this last of-the-big bunkhouse projects completed. The rear of the house wasn’t very good looking. The crawl space access had a wood lid that tilted down towards the house, so water could run into a portion of the crawl space. In the middle is a septic pump that moves waste from the bunkhouse to the septic tank. To the right of that is the crawl space access. In front of both items is an area where the septic pipe from the pump drops into the ground (so needs to be covered.

Perhaps the biggest challenge was using reclaimed, deformed and twisted pressure treated wood to build this. Between cutting down he pieces and using clamps, I was able to straighten the wood enough to make it usable.  Now instead of two different doors for accessing the pump and crawl space there is one larger door.

Before:2022-09-04-bunkhouse-rear

After:

2022-09-09-bunkhouse-rear

 

 

 
To Top

Year? ‘Jeep’ News Vol 1. No. 4

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

Thanks to Jan, we can have a look at the No. 4 issue of the ‘Jeep’ News. It’s unclear when this was published, but late 1947 seems most likely. The name Russ Borg is printed just above the ‘Jeep’ News name, though the H&R Repair Service out of Lohrville, Iowa, is listed on the back as a place to go for a free demonstration. The only reference I could find to Russ Borg was that he was involved with on in the Warner Brother’s movie studio.

1947-04-jeep-news-lores-01 1947-04-jeep-news-lores-02 1947-04-jeep-news-lores-03 1947-04-jeep-news-lores-04 1947-04-jeep-news-lores-05

Continue reading

 
To Top

1947 Jeep News Vol.1 No. 3

• CATEGORIES: Advertising & Brochures, Features, Magazine • TAGS: This site contains affiliate links for which I may be compensated.

Thanks again to Jan for sharing another early Jeep News magazine. This one is titled Milt. Henry’s ‘Jeep’ News. There is a reference to a jeep bought in early 1947, so my guess is that this was published sometime in mid 1947. The jeep-related company advertised on the back of this issue is Lincoln St. Garage, 7 Lincoln St., West Medway, Massachusetts.

1947-jeep-news-vol1-no3-lores-01 1947-jeep-news-vol1-no3-lores-02 1947-jeep-news-vol1-no3-lores-03 1947-jeep-news-vol1-no3-lores-04

Continue reading