Industrial-Welder-Generator Research Archives

The Willys Motor was repurposed for a variety of uses, including Welders, Generators, Mowers, Auxiliary Power, Boats, and more.

To Top

1943 Willys-Overland Fire Pump Little Rock, AR $400

This Willys-Overland Fire Pump needs an L-head, but it seems an unusual item. It looks like the trailer was not original to the unit, based on these two photos from G503:

willys-fire-pump1 willys-fire-pump2

https://www.facebook.com/groups/WillysSwapMeet/permalink/2800695516870376

“1943-dated Willys American fire pump. US Army Corps of Engineers, 250 GPM.
“Willys American” cast into the pump body. Enclosure is gone.
The base is the fuel tank. Mounted on a 2 wheel trailer chassis with antique tires and 2” ball hitch.
No suspension and old tires so needs to be hauled on a trailer.
Has WWII OD paint under the red paint.
I removed the engine and bellhousing for use in WWII jeep restoration. Selling with the engine front plate, manifolds & carburetor, governor, oil filter & bracket, fan and fan shroud and generator. You will need to supply a Willys L-134 motor and bellhousing to put this back in operation.”

willys-overland-fire-pump-trailer1

willys-overland-fire-pump-trailer2

willys-overland-fire-pump-trailer3

willys-overland-fire-pump-trailer4

Continue reading

 
To Top

Hobart Welder Southbury, CT $650

• CATEGORIES: Industrial-Welder-Generator

Seems like a good price.

https://nwct.craigslist.org/for/d/woodbury-hobart-welder/7223732344.html

“Hobart Welder – run by Willys Jeep Motor – $650 OBO”

hobart-welder-ct

 
To Top

Holt Forklift with Willys Parts Rowena, OR $2750

• CATEGORIES: Industrial-Welder-Generator

UPDATE: Still Available.

(08/30/2020) If you are looking for an unusual Willys-related project, this Holt forklift built using some Willys parts and unusual transferase might fit the bill.

https://portland.craigslist.org/grg/for/d/dallesport-willys-jeep-holt-forklift/7226150488.html

“Willys Jeep components made into a fork lift (70-80 years ago). 4 cylinder engine, 3 speed transmission, 3rd member, etc. unique transfer case not working…., 8 lug 16.5’s,”

holt-willys-forklift-rowena-o1 holt-willys-forklift-rowena-o2 holt-willys-forklift-rowena-o3 holt-willys-forklift-rowena-or4

 
To Top

Hobart Welder and Generator Easton, PA $500

• CATEGORIES: Industrial-Welder-Generator

Welder does not work, but the engine worked last year.

https://allentown.craigslist.org/pts/d/easton-old-hobart-welder-with-willys/7220747391.html

“Old Hobart welder (Welder part is no good) with Willys Jeep CJ2A flat head engine and governor. I had the engine running a year or so ago. Held good oil pressure but did smoke. Has antifreeze in it and no cracks in the block. Bring a trailer with a winch as the trailer that it’s on it not towable. The one wheel is frozen up and won’t roll.”

generator-allentown-pa1

generator-allentown-pa

 
To Top

Year? Hobart Welder Hudson, FL $500

• CATEGORIES: Industrial-Welder-Generator

Still welds.

https://tampa.craigslist.org/psc/tls/d/hudson-hobart-welder/7211828472.html

“This is an old but still functional Hobart wilder. It comes with the leads and an extra engine block. It has a Willies motor in it now and still turns over. It’s been in storage since my brother pasted. It was his.”

hobart-welder-tb-fl1 hobart-welder-tb-fl2 hobart-welder-tb-fl3

 
To Top

WWII Generator Mariposa, CA $500

• CATEGORIES: Industrial-Welder-Generator

Includes an MB engine #253438

https://merced.craigslist.org/pts/d/mariposa-willys-mb-engine/7219304891.html

“Willys MB engine in a WWII generator set. Engine serial number MB 253438. Engine oil clean and antifreeze in
the radiator. Generator was used up to a few decades ago until wood rats inflicted damage on the generator wiring
and controls. Engine turns freely. This is sold as an engine only as I do not think the generator is worth repairing.
I am not sure how correct the carburetor is.
$500 or offer”

willys-mb-generator

 
To Top

Hobart Welder Hudson, FL $550

• CATEGORIES: Industrial-Welder-Generator

This was last run about 6 years ago.

https://tampa.craigslist.org/psc/tls/d/hudson-hobart-welderwillies-motor/7164267834.html

hobart-welder-hudson-fl1 hobart-welder-hudson-fl2

“This welder has a willie motor in it and a engine for parts also comes with this purchase. It is model GPB-261. It was last run about 6 years ago but it still turns and has been kept inside.You could use this motor in your Jeep.”

 
To Top

Willys Powered Generator Kensett, IA $350

• CATEGORIES: Industrial-Welder-Generator

Sounds like it still runs.

https://masoncity.craigslist.org/for/d/hanlontown-military-generator/7202307070.html

“Military generator. 120/240 single phase or 120/208 three phase. Name plate is difficult to read but I believe it to be either 13.8 or 15.8kw. Has a flathead 4 Willys engine,antifreeze good to -40, Gasoline. Uses 2 12 volt batteries for start and generator field. Very reliable,but we havent used it in several years so it needs new batteries . Like all military equipment, very heavy.”

generator-willys-ia

 
To Top

Year? Hobart Welder w/ Willys Engine Seeley Lake, MT $500

• CATEGORIES: Industrial-Welder-Generator

Seems worth a look.

https://missoula.craigslist.org/tls/d/seeley-lake-1960s-welder/7185490032.html

“1960’s Welder, ran fine, but has not been fired up for 10-plus years, but kept under cover.
$500.00… OBO”

year-hobart-welder-willys-lakeseeley-mt

 
To Top

CJ-2A Engine in Welder Alexandria, VA $300

• CATEGORIES: Industrial-Welder-Generator

UPDATE Still Available.

(05/01/2020) There could be some parts value here.

https://washingtondc.craigslist.org/nva/pts/d/alexandria-willys-cj-2a-industrial/7199435664.html

“Complete Willys CJ-2A 4 cylinder flat head engine with all accessories and governor. This item sat in a shed for about 25 years and has been covered by a tarp for a couple of years after going out of service for fuel tank reasons. Item is stuck from sitting and is still attached to the arc welder it powered and on the trailer it is transported on. Sold as is. $300.00.”

cj2a-welder-alexandria-va1 cj2a-welder-alexandria-va2

 
To Top

1953 CJ-3B, Year? M-38, Generator Manhattan, KS $4500

• CATEGORIES: CJ-3B, Industrial-Welder-Generator, M-38, Parts

Lots of parts, but unclear just how much value is here. Has a Sears Deluxe Hardtop.

https://www.facebook.com/marketplace/item/637199820484975/

1953-cj3b-manhattan-ks0 1953-cj3b-manhattan-ks2 1953-cj3b-manhattan-ks3

1953-cj3b-manhattan-ks1

“1953 Jeep Cj3b · Suv · Driven 99,999 miles. 1953 Willys cj3b tub with fenders, with windshield with glass, F head 134 motor with starter and gen, trans, radiator, rolling chassis, new leaf springs new fender supports for front a tub support, seats including rear seat

Not sure of year but willys M 38 tub with left fender, L head 134 motor with starter and gen, trans, radiator, 2 windshields one I have glass and rubber, rolling chassis with good brakes excellent under carriage, Continue reading

 
To Top

2 1946 Hobart Generators Columbia City, IN $1000

• CATEGORIES: Industrial-Welder-Generator

UPDATE: Still Available.

(05/22/2020) There could be value here.

https://www.facebook.com/marketplace/item/237003434027074/

“I have 2 hobart GP-258 generator welders for sale both complete the one on the trailer has the arc sense throttle linkage NEITHER OF THEM RUN but wouldn’t take much to get going both engines are free and have compression uses a Willys CJ2A engine parts are easy to find at any auto parts store just lost motivation. Trailer included sells as a set will not separate”

2-hobart-generators-welders-columbiacity-in1 2-hobart-generators-welders-columbiacity-in2

 
To Top

Year? Hobart Welder/Generator Dorchester, WI $650

It runs. Could be a good price.

https://www.facebook.com/marketplace/item/1143669202682808/

“D.C. Generator/ Welder.needs a switch & cables,WILLY’S Jeep motor runs, a definite great buy. Located east of Colby”

Year-hobart-generator-welder-wi

 
To Top

Willys-Powered Hobart Welder Helena, MT $450

• CATEGORIES: Industrial-Welder-Generator

Could be a good price.

https://www.facebook.com/marketplace/item/1100508760323210/

“Good Old Working Welder”

hobart-welder-mt

 
To Top

Willys-Powered Fork Lift Lebanon, OR $2000

• CATEGORIES: Industrial-Welder-Generator

If you like to have all your toys Willys-powered, this might interest you.

https://www.facebook.com/marketplace/item/556704494926917/

“Gas forklift has willys motor 4 cylinder. Cold blooded. Runs good has minor oil Leak but otherwise works good”

willys-powered-forklift-lebanon-or

 
To Top

Willys Powered Hobart Welder Sarah, MS $600

• CATEGORIES: Industrial-Welder-Generator

No pics provided.

https://memphis.craigslist.org/grd/d/sarah-hobart-welder/7038082415.html

“Hobart Welder 1940’s dc generator willys jeep 4 cyc. Industrial motor liquid cooled with trailer.”

 

 
To Top

1946 Generator? Silver Springs, NV $400

• CATEGORIES: Industrial-Welder-Generator

It’s an industrial engine with a large saw attached to it.

https://elko.craigslist.org/pts/d/silver-springs-1946-willys-cj-motor/7029649795.html

1946-industrial-engine

“MUST SELL– 1946 Willy’s Engine SN:638632 W2, in front of serial number is 1-11 and after serial number is N1-CR. We are asking $400.00 obo

It is in running condition except it needs a little work. Needs some hoses and the radiator needs replace(new one sitting there for it) I am selling this for a friend (who has passed away) I don’t know much about it so it is best that you come look at it at the Antique Link store in Silver Springs. It is mounted to a trailer with a large Buss saw setup attached.

It can be towed as is. Trailer has an attached hitch.”

 
To Top

Hobart Welder/Generator Roseville, MN **SOLD**

• CATEGORIES: Industrial-Welder-Generator

UPDATE: **SOLD** Was $800.

This industrial engine also has the heat shield atop the carb.

“For sale is a Hobart G310 welder/generator. This unit has a Willies Jeep motor that could be pulled and used in something else. The welder/generator doesn’t come with leads”

hobart-generator-mn1 hobart-generator-mn2 hobart-generator-mn3 hobart-generator-mn4

 
To Top

Navy Generator Norwalk, IA $750

• CATEGORIES: Industrial-Welder-Generator

This Navy generator circa 1942-1944 includes a rare heat shield.

https://desmoines.craigslist.org/pts/d/norwalk-jeep-engine/7005906862.html

l-134-heat-shield2

navy-sk-radar-equipment-generator-norwalk-ia1 navy-sk-radar-equipment-generator-norwalk-ia2 navy-sk-radar-equipment-generator-norwalk-ia3 navy-sk-radar-equipment-generator-norwalk-ia4

“complete Navy military self contained Power Unit, about 1942 – 1944
Generator is powered by a Willys Jeep 4 cylinder gas engine
Filed the points, hot wired the distributor, attached oil pressure gauge, poured gas in the carb
Started right up, made oil pressure,
I did not try to get power from the generator.
Has all the steel panels to keep it dry.
Call to see it, if it’s listed it’s for sale.
15kv, 3 phase, 120 volts, General electric
Hour meter reads 0133.5
serial number 70
call to see/buy it,”

 

 
To Top

WWII Generator L-134 Santa Cruz, CA **SOLD**

• CATEGORIES: Engine, Industrial-Welder-Generator

UPDATE: **SOLD** Was Make Offer.

Seems worth an offer.

“Nice engine with less that 500 hours on it. It cam from a WWII generator that had little use. Was running when disconnected and comes with the radiator. Make me a fair offer.”

heat-shield-industrial-engine-wwii4

heat-shield-industrial-engine-wwii2 heat-shield-industrial-engine-wwii3

 
To Top

1944 Signal Corps Generator Chico, CA **SOLD**

• CATEGORIES: Industrial-Welder-Generator

UPDATE: **SOLD** Was $1600.

Runs.

“1944 pu-58 g Signal corps. Okeef &Merritt 3k generator
Powered by 4cyl jeep L-134
Runs good and puts out plenty of power 120-240 vac
Can easily run a house if the power goes out.”

1944-generator-chico-ca

 
To Top

2 Arc Welders Windfield, KS **SOLD**

• CATEGORIES: Industrial-Welder-Generator

UPDATE: **SOLD** Was $600.

Both for $600.

2-arc-welders-ks1 2-arc-welders-ks2

“2 old Arc welders
They have the old Willys 4 cylinder flat head motors
They need work
$600 for the two of them
502 E 6th Ave.”

 
To Top

Hobart Welder Wallace, MI $800

• CATEGORIES: Industrial-Welder-Generator

It welds and rolls on a trailer. Has a CJ-2A engine.

https://up.craigslist.org/grd/d/porterfield-hobart-welder-with-willis/6926673293.html

hobart-cj2a-engine-mi0 hobart-cj2a-engine-mi1 hobart-cj2a-engine-mi2

“welder runs good and welds good, has 110 volt outlet to run a hand grinder,with long welding leads on mobile home axle for easy transport”

 
To Top

L-134 Engine From Hobart Welder Huntsburg, OH $875

• CATEGORIES: Engine, Industrial-Welder-Generator

Given the serial number, this appears to have been rebuilt at some point.

https://cleveland.craigslist.org/wan/d/huntsburg-jeep-cj-2-willys-industrial/6878538274.html

“Jeep CJ-2 Willys Industrial L134 Go Devil Engine Powered a Hobart Welder.
Model CJ2-A
905997
s/n RJ293377”

cj2a-l134-hobart-welder

 
To Top

Hobart Welder/Generator Washoe Valley, NV $500

• CATEGORIES: Industrial-Welder-Generator

Does not mention if it runs.

https://reno.craigslist.org/tls/d/washoe-valley-1950s-hobart-welder/6880928212.html

“Willys Jeep 4-cylinder powered Hobart welder/generator”

1950-hobart-generator-nv