Industrial-Welder-Generator Research Archives

The Willys Motor was repurposed for a variety of uses, including Welders, Generators, Mowers, Auxiliary Power, Boats, and more.

To Top

WWII GPW-Engine Powered Schramm Generator Gilbert, AZ $4200

• CATEGORIES: Industrial-Welder-Generator

Santosh has this generator for sale.

https://phoenix.craigslist.org/evl/for/d/gilbert-us-navy-vintage-schramm-ford/7515420756.html

“SCHRAMM INC , west Chester PA manufactured Vintage world War 2 US Navy Generator powered by a ford GPW motor that if L134 flat head go devil engine used by Willy’s and ford for original Jeeps of the Second World War. This engine is rare and you seldom find one.
35 hp engine
Capacity 7,5
Generating 65 amps”

ford-gpw-generator-schram-gilbert-az

 
To Top

CJ-2A-Engine Powered Hobart Generator Williams Township, PA $1700

• CATEGORIES: Industrial-Welder-Generator

Looks in good shape.

https://allentown.craigslist.org/tls/d/durham-hobart-welder-cj2-willys-cyl/7511727864.html

hobart-cj2a-generator-williams-township-pa1 hobart-cj2a-generator-williams-township-pa2 hobart-cj2a-generator-williams-township-pa3 hobart-cj2a-generator-williams-township-pa4

“For sale one Hobart 4 CYL Willys gas powered welder.
Welder is rated at 250 amp @ 60% Duty cycle.
Look at the photo of the data plate.
It also has a 110-volt 1KW outlet so you can operate your grinder.
Tires have been replaced about a year ago.
Welder operates as it should. Family owned since the early sixties kept inside, used on the farm.
Bring your gear if you want to try it out.
Cash sale only. No trades.
Equipment Bill of sale will be conveyed to buyer.
Please look at all the photos before asking any questions.
I check my mail (once every morning) and will respond as soon as I’m able.
Low Ballers and tire kickers please don’t respond.
If you see this listing, It’s still available.
Thank you for looking.”

 
To Top

WWII Generator Burleson, TX $1000

• CATEGORIES: Industrial-Welder-Generator

This has been stored around 15 years.

https://dallas.craigslist.org/mdf/bar/d/burleson-wwii-generator/7512899963.html

wwii-generator-burleson-tx1 wwii-generator-burleson-tx2 wwii-generator-burleson-tx3

“WWII 1940’s. Willys Jeep Flathead 4 cylinder generator.
Been sitting in a barn for 15yrs +
I just pulled it out of the barn 2 days ago
It runs, it generates power as it should
Been sitting for all these years, so you know it will need some work, I’ve already spent the time to make sure everything works but it will need.
Spark plug wires
2 tires
Gas tank either cleaned or replaced, recommend replacement
Asking $1,000 obo
Will entertain trades but cash is king but not required. Text me only pls”

 
To Top

1947? Truck(?) Forklift Biggs, CA $5000

• CATEGORIES: Industrial-Welder-Generator, Willys Trucks

Andy spotted this unusual forklift. I’d have to guess it is a modified four-wheel-drive truck?

https://www.facebook.com/marketplace/item/601150087980159

“One of a kind 1947 jeep Willy’s forklift. 61 Ford falcon engine . Fuel line and hydraulics need replacement. Needs new tires. Serious offers only my grandpa built this himself and used it on our farm for many years .. feel free to ask questions”

1947-truck-forklift-biggs-ca1 1947-truck-forklift-biggs-ca2 1947-truck-forklift-biggs-ca3

 
To Top

Solid & Split Rims Jerome, ID

• CATEGORIES: Industrial-Welder-Generator, Tires and Rims

wIt’s unclear what the price on these two rims are. Also included in the ad is an industrial L-head engine (with a head marked by welds — probably fixing cracks)..

https://twinfalls.craigslist.org/pts/d/jerome-jeep-engine-and-rims/7492705803.html

“As-is welded block
Willies jeep engine flat head 4 for parts
And 2 different jeep rims.”

solid-rim-split-rim-jerome-idindus-engine-jerome-id

 
To Top

1944 Generators Narvon, PA

• CATEGORIES: Industrial-Welder-Generator

This seller is scrapping 4 1944 generators with Willys engines. If you need spare parts, he may have some to sell.

https://www.facebook.com/marketplace/item/2919881961635876

“I’m scrapping 4 of these gen sets. engines are sold. Anyone want other parts pm me with request and I will give you a price”

1944-generator-narvon-pa

 
To Top

Willys-Powered Hobart Welder Syracuse, NY $500

• CATEGORIES: Industrial-Welder-Generator

This looks like a good price.

https://syracuse.craigslist.org/tls/d/parish-hobart-welder/7462691708.html

“1950’s Hobart gp-258 pipeliner welder. Starts, Runs, and welds. Could use a carb cleaning. Newer battery. Powered by a willys industrial L134 engine. Auxiliary outlets is 120vDC. I’m not including the leads as I have other welders. Firm $500”

year-syracuse-hobart-welder

 
To Top

Willys-Powered Generator Hamilton, OH $600

• CATEGORIES: Industrial-Welder-Generator

Unclear how much value is here.

https://cincinnati.craigslist.org/for/d/hamilton-generator-for-sale/7462337030.html

genrator-oh

“Army Signal Corps generator for sale. Was stored inside old barn for the last many? years. Unit ran when stored. Flat head Willy’s Jeep engine with governor. Has oil in engine. $600.00 for the complete unit, or best reasonable offer. Local pick up, cash sale only. I can load on your trailer. Approximate weight, 1600 lbs.”

 
To Top

Holt Forklift with Willys Parts Rowena, OR $1750

• CATEGORIES: Industrial-Welder-Generator

UPDATE: Price dropped to $1750.

(08/30/2020) If you are looking for an unusual Willys-related project, this Holt forklift built using some Willys parts and unusual transferase might fit the bill.

https://portland.craigslist.org/grg/for/d/dallesport-willys-jeep-holt-forklift/7452150380.html

“Willys Jeep components made into a fork lift (70-80 years ago). 4 cylinder engine, 3 speed transmission, 3rd member, etc. unique transfer case not working…., 8 lug 16.5’s,”

holt-willys-forklift-rowena-o1 holt-willys-forklift-rowena-o2 holt-willys-forklift-rowena-o3 holt-willys-forklift-rowena-or4

 
To Top

Willys-powered Generator Hamilton, OH **SOLD**

• CATEGORIES: Industrial-Welder-Generator

UPDATE: **SOLD** Was $800.

Unclear how much value is here.

“Army Signal Corps generator for sale. Was stored inside old barn for the last many? years. Unit ran when stored. Flat head Willy’s Jeep engine with governor. Has oil in engine. $800.00 for the complete unit, $600.00 for the engine or best reasonable offer. Local pick up, cash sale only. I can load on your trailer. Approximate weight, 1600 lbs.”

generator-hamilton-oh1 generator-hamilton-oh2

 
To Top

Hobart Welder Clear Lake, MN $1400

• CATEGORIES: Industrial-Welder-Generator

Looks like a good setup.

https://eauclaire.craigslist.org/tls/d/clear-lake-hobart-250-dc-portable-welder/7410964702.html

“Hobart 250 DC Portable Welder. Runs great. New battery. 70 ft cables. Set up to carry torch. Jeep Willys engine”

hobart-welder-mn0 hobart-welder-mn01 hobart-welder-mn1 hobart-welder-mn2

 
To Top

1942? Hobart Welder Emmett, ID $1000

• CATEGORIES: Industrial-Welder-Generator

This appears to be sitting on some kind of jeep chassis-turned trailer?.

https://boise.craigslist.org/tls/d/emmett-1942-hobart/7399057978.html

“I have a 1942 Hobart welder. On a custom made trailer, a Willie’s motor and it welds great but has a loose wire connection. The trailer is worth 1000 by itself no loballers”

1942-hobart-generator-emmet-id3

1942-hobart-generator-emmet-id0 1942-hobart-generator-emmet-id1 1942-hobart-generator-emmet-id

 
To Top

1945 GPW Early APU … Parts Available

• CATEGORIES: Features, GPW (Ford MB), Industrial-Welder-Generator • TAGS: .

UPDATE: As of July 13, 2021, this GPW APU is now in Stefan’s hands in Germany. As you can see, by the time he acquired it parts had already been removed (see original post from 2017 at the bottom of this post). He does not want the APU parts. I figured it is a long shot, but that I would check to see if anyone had an interest in the APU-related parts (some are O.E. Szekely); Stefan is willing to part with them.  Comment below if interested or email me at d@deilers.com and I’ll connect you with Stefan.

Here’s how the jeep looked prior to pulling the parts:

apu-jeep-germany0 apu-jeep-germany1 apu-jeep-germany2 apu-jeep-germany4

Here are the parts related to the PTO:

PTO APU Cover:

apu-jeep-parts-germany20

Continue reading

 
To Top

Hobart Welder/Generator Chester, NJ $2000

• CATEGORIES: Industrial-Welder-Generator

This looks in good shape.

https://newjersey.craigslist.org/tls/d/chester-hobart-welder-generator-on/7317249845.html

“Up for sale is a Hobart welder that’s on a trailer, uses a gas Willies engine? Everything works great and is good to go.”

hobart-generator-willys-engine-nj0 hobart-generator-willys-engine-nj1 hobart-generator-willys-engine-nj2

 
To Top

Hobart Welder Redwood City, CA **sold**

• CATEGORIES: Industrial-Welder-Generator

Update sold: was $700.

Runs.

“Vintage Hobart gas powered welder. Powered by Jeep Willys engine.
It’s probably 1950’s era.
Runs and welds perfect. Comes with leads and mounted on a trailer. Located at 3519 Edison Way, Menlo Park.”

hobart-welder-palo-alto-ca1 hobart-welder-palo-alto-ca

 

 
To Top

1954? Siebert Willys Ambulance Utility Cars Brochure

This undated Siebert Willys Ambulance brochure was probably produced in 1954-or 1955, based on the grille design on page 4. There is no form number on it. Within the brochure the company describes three different ambulance options.

  1. One was called an Ambulance Utility Wagon and is featured on the backpage. It appears to be a basic sedan delivery with added first-aid/ambulance equipment.
  2. The company also produced a Willys Custom Ambulance, which included side windows and a “deluxe interior”.
  3. The third was called the Willys Ambulance Bus (originally called the Willys Ambulance in a 1951 brochure). It was a lengthened 4-door (with the rear doors set up as suicide doors), along with other mods.

1954-siebert-willys-ambulance-bus-brochure1-lores 1954-siebert-willys-ambulance-bus-brochure2-lores 1954-siebert-willys-ambulance-bus-brochure3-lores 1954-siebert-willys-ambulance-bus-brochure4-lores

Derek provides more information on the Siebert Ambulances and has additional pics on the CJ-3B page.

 
To Top

Hobart Welder Menlo Park, CA $1500

• CATEGORIES: Industrial-Welder-Generator

Still works.

https://sfbay.craigslist.org/pen/tls/d/menlo-park-hobart-welder/7280916528.html

“Vintage Hobart gas powered welder. Powered by Jeep Willys engine.
It’s probably 1950’s era.
Runs and welds perfect. Comes with leads and mounted on a trailer. Located at 3519 Edison Way, Menlo Park.”

hobart-welder-genertor-menlopark-ca

 
To Top

Hobart Generator/ Welder Waterbury, CT **SOLD**

• CATEGORIES: Industrial-Welder-Generator

UPDATE: Price dropped to $650.

Sounds like it runs.

“Hobart Welder – run by Willys Jeep Motor -“
hobart-welder-generator-ct0 hobart-welder-generator-ct1 hobart-welder-generator-ct2

hobart-welder-generator-ct01

 
To Top

Year? Hobart Welder/Generator Lake Worth, FL $375

• CATEGORIES: Industrial-Welder-Generator

Looks like an early 1950s l-head. Seller describes it as diesel, but I doubt that.

https://miami.craigslist.org/pbc/for/d/boca-raton-antic-hobort-willys-welder/7259633410.html

“It is a willys diesel motor needs a 6 volt battery to start needs some cleaning and paint photos will tell all .Someone told me it is the motor that the army uses for jeeps I would think it would have to be dependable.”

generator-welder-hobart-fl0 generator-welder-hobart-fl1 generator-welder-hobart-fl2

 
To Top

King Seeley Governor for Industrial Engine Conway, MA **SOLD**

• CATEGORIES: Industrial-Welder-Generator, Parts

UPDAATE: **SOLD** Was $20.

The Seller has more than one for sale. I imagine these are pretty rare?

“Vintage King-Seeley V54S-126D governor from Willys industrial engines. New in the box. Several available at $20 each.
OESCO Inc”

king-seeley-governor-industrial-engine1 king-seeley-governor-industrial-engine2 king-seeley-governor-industrial-engine3 king-seeley-governor-industrial-engine4

 
To Top

General Supply Generator w/ Willys Engine Coquille, OR $350

• CATEGORIES: Industrial-Welder-Generator

Blainse shared this General Supply Company generator. More on these here.

https://oregoncoast.craigslist.org/tls/d/coquille-portable-air-compressor/7225500954.html

“Portable Air Compressor
General Supply Company 260 gasoline powered air compressor.
Jeep 4-cylinder engine.
Has not been started in a few years, so will require some TLC.”

general-supply-260-generator-coquille-or0 general-supply-260-generator-coquille-or2 general-supply-260-generator-coquille-or3 general-supply-260-generator-coquille-or4

 
To Top

Industrial CJ-3A? L-head Engine Pocahontas, MO **SOLD**

• CATEGORIES: Engine, Industrial-Welder-Generator, Parts

UPDATE: **SOLD** Was $450.

Could be worth a look. Given the oil filter bracket, this may be a CJ-3A era engine.

industrial-lhead-mo

“Here is a Willys Jeep Industrial engine that originally powered a welder. The welder was bad and scrapped. This engine is loose and turns over but I’ve never heard it run; it was supposedly running when the welder unit failed. Should make a good engine for parts or might be restored. I understand these were used in the early Willys Jeeps including the CJ2A. Asking 450 or make an offer. It will part out for more than my asking price, so if it doesn’t sell soon I’ll just part it out. Text is best. If you are reading this ad then it’s still available; please be serious as I’ve dealt with all the deadbeats I want to.”

 
To Top

1940s Hobart Welder Catawba, NC $925

• CATEGORIES: Industrial-Welder-Generator

This looks in good shape. It also has a 110 volt outlet.

https://hickory.craigslist.org/tls/d/catawba-hobart-welder-jeep-cj2a-engine/7234588215.html

“1940’s Hobart G-261 welder. Good running Jeep CJ2A industrial engine. Purchased several months ago at an estate auction where it had been neglected in back corner of a garage for decades. Rubbed on it a little, installed new battery, poured water in radiator and in just a short time it started. Engine sounds great, good oil pressure. No water leaks, no oil leaks. Still working out kinks. Gas tank needs good clean out, will require sheet metal removal and I just have not gotten revved up for that yet. Have not tried to weld, have not attempted to test for weld current output. Have plugged a grinder in to 110 volt outlet and that did work.”

hobart-welder-g261-catawba-nc01 hobart-welder-g261-catawba-nc0 hobart-welder-g261-catawba-nc1

Continue reading

 
To Top

1943 Willys-Overland Fire Pump Little Rock, AR $400

This Willys-Overland Fire Pump needs an L-head, but it seems an unusual item. It looks like the trailer was not original to the unit, based on these two photos from G503:

willys-fire-pump1 willys-fire-pump2

https://www.facebook.com/groups/WillysSwapMeet/permalink/2800695516870376

“1943-dated Willys American fire pump. US Army Corps of Engineers, 250 GPM.
“Willys American” cast into the pump body. Enclosure is gone.
The base is the fuel tank. Mounted on a 2 wheel trailer chassis with antique tires and 2” ball hitch.
No suspension and old tires so needs to be hauled on a trailer.
Has WWII OD paint under the red paint.
I removed the engine and bellhousing for use in WWII jeep restoration. Selling with the engine front plate, manifolds & carburetor, governor, oil filter & bracket, fan and fan shroud and generator. You will need to supply a Willys L-134 motor and bellhousing to put this back in operation.”

willys-overland-fire-pump-trailer1

willys-overland-fire-pump-trailer2

willys-overland-fire-pump-trailer3

willys-overland-fire-pump-trailer4

Continue reading

 
To Top

Hobart Welder Southbury, CT $650

• CATEGORIES: Industrial-Welder-Generator

Seems like a good price.

https://nwct.craigslist.org/for/d/woodbury-hobart-welder/7223732344.html

“Hobart Welder – run by Willys Jeep Motor – $650 OBO”

hobart-welder-ct