News Research Archives

To Top

1948 CJ-2A Farmersville, OH $8000

• CATEGORIES: News • TAGS: This site contains affiliate links for which I may be compensated.

The maker of this midwest, rear-flared fiberglass body is still a mystery to me.

https://www.facebook.com/marketplace/item/795507745468000

“tock drive train,new exhaust manifold, thermostat ,pinion seals,transfer case seals,all fluids changed,gauges,runs perfect,warn lock outs,full cage- not tied to frame full fiberglass body 3 inch body lift on 35 s ,have full set stock wheels and tires,same as the spare,rear fuel cell,seats have quick release for easy removal, call if have questions, too much list,cash only,no trades 937 4sixteen 5650 we are moving, needs a new home,price is pretty firm”

1948-cj2a-farmersville-oh6 1948-cj2a-farmersville-oh7 1948-cj2a-farmersville-oh8 1948-cj2a-farmersville-oh9

 
To Top

1946 CJ-2A Project Three Rivers, MI $2500

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Lots of assembly needed.

https://www.facebook.com/marketplace/item/552566193343706

“Complete 1946 CJ2A chassis and powertrain. No body. Most of the wiring is there along with gauges, switches, etc. Steering column and box. Newer shocks. Engine was supposedly rebuilt but leaked engine oil pretty bad out of the rear main. I did drive it once before disassembly. Has a newer aluminum radiator. I have a new seal and pan gasket that comes with it. Frame is in really good shape. I did have to cut a small piece to rescue the original serial tag for my new frame I’m building. Ask questions price is $2500.”

1946-cj2a-threerivers-mi

 
To Top

Taking a Week Off

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Between the race jeep, more planters for Ann, and getting our irrigation systems running, we are pretty busy, so I’m going to take a week off of eWillys. See ya next week.

 
To Top

1954 CJ-3B Spokane, WA $4000

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

A ran-when-parked situation.

https://www.facebook.com/marketplace/item/243597098165129

“1954 Willy’s CJ3B jeep. Small block Chevy 305 engine, turbo 400 automatic. New NDT tires, freshly powder coated original wheels. New seats that need bolted in. Ran when parked but needs tank cleaned out, can fire it up to show you it runs on starting fluid. Will need to trailer it home. Clean title.”

1954-cj3b-spokane-washn2 1954-cj3b-spokane-washn3 1954-cj3b-spokane-washn4

 
To Top

1948 CJ-2A Kruger, TX $2000

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Unclear how much value is here.

https://www.facebook.com/marketplace/item/559604209420868

“Older Jeep in pieces. Tub, 2 frames one custom made to accept a chevy v6. Original motor and Trans with it. Will entertain offers, and trades. Dakota truck, bangs, ammo. Title is included. If it’s posted it’s available. Moving sale. Will post more items.”

1948-cj2a-krugerville-tx954 1948-cj2a-krugerville-tx96 1948-cj2a-krugerville-tx97 1948-cj2a-krugerville-tx98 1948-cj2a-krugerville-tx99

 
To Top

UPDATE: Anyone near Allentown

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE: A big thanks to Bill who located Frank near the seller. Frank was happy to pick up the items for me and put them in the mail. So many great folks out there!

There is a seller who has a collection of Willys booklets (some manuals and a Willys Equipment binder) that he is willing to sell me for $125, but he’d prefer to have someone local pick them up.

So, is there anyone who could drop by his place in/near Topton, PA, pay him, pick them up, then mail them to me? I can PayPal or send you a check for the gas, time and postage.

 

 
To Top

1948 CJ-2A San Antonio, TX $400

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

No title, but there seems to be value.

https://www.facebook.com/marketplace/item/752548176328779

“CJ-2A jeep project, have in storage. Have no time and moving. Don’t have title, but have data plate. Great for restoration or parts. Doesn’t run and mission grill and seats. Asking $400 OBO Will need a trailer to hual it. If you have any questions DM me.”

1948-cj2a-satx1 1948-cj2a-satx2

 
To Top

Blocked or Denied Comment Screen

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Anyone run into the following message after trying to comment?

cerber-error

Apparently, that’s a new feature for one of WordPress’ security plugins (or new to me). Essentially, as I understand it, if too many bots attack the user login screen, a blanket “citadel” is activated, blocking comments (and probably other things). I too had problems trying to comment just now, and figured out that the “citadel” was blocking me. So, if you see that, feel free to email me and I’ll get it fixed.

 
To Top

1947? CJ-2A? Grayling, MI $5000

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

The title is for a 1947, but this looks like a CJ-3A.

https://www.facebook.com/marketplace/item/5506785249427496

“Frankenjeep. Titled as 47 but body type a 52. New master cylinder, front linkage. Runs and drives. Has electric leak so there is on/off switch to battery under dash. Needs TLC. Currently in storage and won’t be able to get to it till weather breaks. $5,000 or best offer. Wife says I have to many toys so it must go”

1947-cj2a-grayling-mi6 1947-cj2a-grayling-mi7 1947-cj2a-grayling-mi8 1947-cj2a-grayling-mi9

 
To Top

1975 CJ-6 HYuma, AZ $8500

• CATEGORIES: News • TAGS: This site contains affiliate links for which I may be compensated.

This may be a project.

https://www.facebook.com/marketplace/item/213502254590295

“Jeep CJ6 has drivetrain. Missing seats but have seats that I will let go with it.”

1975-cj6-yuma-az6 1975-cj6-yuma-az7 1975-cj6-yuma-az9

 
To Top

No Updates Today

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

No updates today. I got too busy yesterday with the race jeep. Sway bar is done. The gas tank frame and battery box frame will be done by end of day today. After that, on to the floor and cowl.

Also, last night, we agreed to get a pair of kittens from a friend who fosters cats. We will pick them up after they are spayed next week. Hopefully, that helps Lizzy, as she is still dragging around Tom’s toy and looking for him.

2023-03-14-cats

 
To Top

1949 CJ-3A Meridian, ID $10,000

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Runs and drives.

https://www.facebook.com/marketplace/item/882110509737904

“1949 Willys Jeep halfway through restoration. Only driven 95 miles. It clearly needs body work but it drives. We rebuilt the engine, installed new brakes, and a new fuel line in 2019. It might have 25 miles since then. I haven’t had time to mess with it so the battery is dead. It needs either a trickle charge, new battery, or just to be trailered. My dad has the title. It is his so make an offer and I’ll relay it to him.”

1949-cj3a-meridian-id-9 1949-cj3a-meridian-id-6 1949-cj3a-meridian-id-7 1949-cj3a-meridian-id-8

 
To Top

Sunday Departure

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

We’ve moved up our departure date to Sunday. Though we have a pretty good, but narrow band, of good weather on the way down, we are going to reduce our daily drive distances. While there will likely be an occasional post, I don’t plan on doing any type of daily diary like we have in the past, mostly to reduce my work load and because we don’t plan on doing anything all that interesting on our way. We expect it to be a rainy cold drive until we hit Arizona. Instead, I’ll repost some posts from earlier years.

 

 

 
To Top

Enjoy the Break?

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE: Comments are now fixed.

I hope everyone enjoyed the temporary break! It is easy to forget that a website is always one corrupted file away from going down.

Speaking of breaks, we have a week trip planned to Arizona starting Monday. It won’t be a slow winding trip, as 1) we need to get down and back in a week’s time (cows and home responsibilities) are a big reason for the quick trip; 2) we have a small not-bad weather window for coming back; and 3) we have reduced our social interactions, because both Ann and I had some sucky, lingering long-covid issues last year (so, we reduced our exposure to folks and take pre-cautions; I am finally feeling like my old self).

One of our objectives is to pick up a Muller top frame in California that Mike has been kind enough to save for me. I plan to rebuild one for Biscuit following the original plans (probably next fall or winter, which is likely when I’ll have time to finally address Lost Biscuit.

fresno-jeep-club-muller-top-lores

Our second objective is to test drive and purchase a new vintage jeep. I look forward to sharing the news should everything go as we expect!

 
To Top

1948 CJ-2A Boise, ID $6000

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

It’s a project.

https://www.facebook.com/marketplace/item/1217326612243711

1948 Willys CJ2a. Good shape, yard runs and drives. Comes with a ton of extra parts. New tires, radiator, wiring harness, etc. Has early Ford GPW engine installed that is worth $$$$. Lost interest in the project and would like to see it go to. A good home.”

1948-cj2a-bois-id

 
To Top

Year? CJ-2A Body Selah, WA $500

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

May have some parts value.

https://www.facebook.com/marketplace/item/492994446369073

“Willys tub, fenders, hood and frame. Have a Cj2a windshield frame for it as well. No axles, motor or transmission. No paperwork, good for parts. $500 o.b.o”

cj2a-body-selah-wa1

cj2a-body-selah-wa2

 
To Top

No Updates until later

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Well, I got too busy working on the jeep to write posts about them (and am behind on emails), so updates delayed until probably Friday afternoon or who knows ….. on the good side, I have a plan for the floor, almost finished the seat setup (have to finish other stuff under the jeep first), almost finished the tail light setup, and rebuilt the driveshaft safety loop. Good day for small stuff with plenty more small items to go, such as a YJ sway bar is on the way, so I will be able to install that.

 

 
To Top

Hub Loks Hubs Whiteville, NC **SOLD**

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $175.

These are very hard to find hubs which I believe were manufactured by the Dana-Spicer Corp

hub-lok-locking-hubs-nc7 hub-lok-locking-hubs-nc8 hub-lok-locking-hubs-nc9

“Original vintage late forties – early fifties Willy’s Jeep Locking Hubs
10 Spline Dana 25 Axle
Appear to be in working order.
Will need good cleaning, lubricating, and new gaskets.

Have been in my garage in dry storage for more than 25 years.
I’m cleaning up and they need to go.

I have a Paypal account and will ship if you pay shipping.”

 
To Top

1947 CJ-2A La Junta, CO $1000

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Seller indicates they must sell. Unclear how much value is here, but I doubt much over the asking price.

https://www.facebook.com/marketplace/item/854559672482215

1947-cj2a-lajunta-co8 1947-cj2a-lajunta-co9

“*800 dollars tonight!* *Selling for a friend* Need gone within a few days. 1947 cj2 Willy’s jeep with a 302 engine under the hood. No Transmission. Needs complete restoration from interior seats, soft top and exterior body work. Lost of rust on tail end with a dent by left taillight. Jeep enthusiast from Denver came to look at it and his opinion on value would be 3800 with transmission 2800 without. But said a serious buyer would probably start around 1700. Vehicle has No title as original owner ( 2 great grandfather never could find it) He Passed away in 1965 However it is a true Willy’s original make with a fantastic history behind it. He is willing to negotiate a bit due to condition but not willing to let a piece of history and family heirloom go for free. Please message me or let me know if you have any additional questions. Located in la junta and it will need to be trailered out. Potentially willing to meet Halfway from whatever destination for an additional fee if needed”

 
To Top

1948 CJ-2A Foxboro, MA $3500

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

This is a project.

https://southcoast.craigslist.org/pts/d/foxboro-cj2a-project-jeep/7574351001.html

“This is a 1948 Jeep CJ2A. It is an unfinished project. It runs and yard drives.Needs brake work suspension work welding etc. It has a poor frame but comes with a good original CJ3A frame for replacement. Has new seats,water pump, fuel pump, ignition parts.Comes with a new master cyl. and has a clean Mass. Title.
Being sold as pictured. See pics. for information and condition and ask questions. Call or E-mail. No texts will be answered. Thanks”

1948-cj2a-foxboro-ma5 1948-cj2a-foxboro-ma6 1948-cj2a-foxboro-ma7 1948-cj2a-foxboro-ma8 1948-cj2a-foxboro-ma9

 
To Top

Happy New Year 2023 Edition

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Happy New Year 2023!

Normally I write a large rehash of the previous year, then provide previews for the coming one. However, jeep-wise I didn’t do a whole lot in 2022, other than post to eWillys every other day or so. I expect the posting trend to continue, that of new content every other day or so. What I really need to do is downsize my server (it’s $100/month), and move as much good content to a place where it can be preserved (though I am not sure where that will be).  But, I don’t expect to tackle that task anytime soon.

For the most part, our winter and spring 2023, will mostly involve us staying around our place. With the new lighting (see below), I should be ready by early next week to begin work on the racer again. We also have one quick trip planned for 2023, a jaunt to the Southwest, to hopefully pick up a new jeep (we still need to test drive it). Assuming everything goes as planned, I know you all will be excited to see what we get.

In other news, one thing I’ve been wanted to do since we bought this place is replace the dying fluorescent lights in the shop with LED lights. Well, yesterday I began that process.

I was going to rent a lift to do it, but then I realized I could use my tracier+fork lifts with a tall aluminum ladder to reach the lights. You may notice that the ladder is strapped to the forks, which made it feel very secure (the garage floor is sealed and kind of slick as a result, so securing the ladder was important). The whole setup worked really well and was simple to reposition.

2022-12-31-replacing-lights-shop1

2022-12-31-replacing-lights-shop2

I elected to go with the LED replacements that removed the ballast and required rewiring, but in the end I felt they would be the simplest (no more ballast) to maintain. To complete the replacement, besides the lights, I also had to buy replacement holders. So, I swapped out the old holders, wired up the new ones, and inserted them where the old ones were.

For bulbs, I went with stock# PLTS-11961 from https://www.1000bulbs.com
5400 Lumens – 42 Watt – 4000 Kelvin – 8 ft. LED T8 Tube Lamp – Type B
And for new holders I went with these from Amazon: https://www.amazon.com/gp/product/B06XT7ZJLV

 
To Top

My Evolution Metal Chop Saw

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

One of the tools I acquired a few months ago to work on my cage was a metal chop saw. After doing some research, I settled on the Evolution chop saw, as it had a bunch of good reviews. I found the best price through the manufacturer site itself: Currently it is priced at $379.99

A couple days ago I finally had time to pull it out of its box and give it a test on a piece of angle iron. Holy Smokes! It cut right through the mild steel angle iron, faster than I expected. I don’t know how long the blade will last, but this tool will sure come in handy! It sure beats a hacksaw!!!

I should note that I am just reporting on my experience. I have no association with Evolution nor do I receive anything for promoting this product.

2022-12-26-metal-chop-saw

 
To Top

1948? CJ-2A? Rogers, AR $1665

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Listed as a 1948, it appears to be a CJ-3A.

https://www.facebook.com/marketplace/item/5316472551796412

“Willys Jeep for sale or trade. Selling my projects and this cool Jeep is one V6 motor and 3 speed Has lots of rust on body but frame looks great Was told starter is not working but have not had any time to work on it Would make great hunting rig or Completely restore it I don’t know much about the Jeep”

1948-cj2a-rogers-ar95 1948-cj2a-rogers-ar96 1948-cj2a-rogers-ar97 1948-cj2a-rogers-ar98 1948-cj2a-rogers-ar99

 
To Top

Hacker Boat with Willys Engine Milton, NH $8500

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Andy shared this boat (a Hacker) that sports a Willys 4 cyl engine. Unclear whether it is an L-head or F-head.

https://nh.craigslist.org/boa/d/milton-wood-project-boats/7543342274.html

Early 18′ Hacker design 2 cockpit aft, engine forward 4- cylinder Willys $8,500.- 1935 18′ Chris Craft model 301 split cockpit Gray Marine 4 -cylinder $4,000.- 1949 18′ Ventnor with Chrysler 6 -cylinder. $1,500.- Hacker and Chris are in N.H the Ventnor is in Ct.”

boat-milton-nh2 boat-milton-nh1

 

 
To Top

The Qualls’ Roadtrip Part II

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

(<– See pics from the westward trip here, Part I)

A few days ago, the intrepid Team Qualls reached the western destination: Ventura, California. This pic celebrates that achievement:

2022-09-30-roadtrip-ventura

Wasting no time, they turned north along Highway 1, a magnificent coastal drive I’ve had the pleasure of making several times, but never in a topless jeep!

2022-09-30-roadtrip-coast1

2022-09-30-roadtrip-coast2

It appears Randy and Carson kept driving north until they crossed over the Golden Gate Bridge. There, they discovered first hand the thick summer fog that often inundates the central coast, turning the weather from warm to near-frigid and the views from beautiful to a grayish-soupy-fog (where I lived in Aptos, California, from 2003-2006, the afternoon fog arrival was a near daily summer event).

Eventually, the pair turned east towards Yosemite National Park. Here are a few pics:
2022-10-01-roadtrip-yosemite3

Continue reading