Parts Research Archives

To Top

CJ-5 Koenig Hardtop Auburn, ME $275

• CATEGORIES: Parts • TAGS: .

Not sure how bad the run is or isn’t.

https://worcester.craigslist.org/pts/d/koenig-jeep-willys-hard-top/6767863519.html

“Koenig hardtop and doors with glass off of a 1955 Willys Jeep”

koenig-hardtop-me

 
To Top

1948 CJ-2A Frame & Differentials Apex, NC $650

• CATEGORIES: Parts

Frame looks ready to go.

https://raleigh.craigslist.org/pts/d/1948-willy-frame-diffs/6764689813.html

“1948 Willy’s frame and the front and rear diffs. Frame has been sandblasted and primed. Everything has been kept inside and out of the weather.”

1948-cj2a-frame-nc

 
To Top

Meyer 6′ Snow Plow Lebanon, PA $1100

• CATEGORIES: Parts

Looks in good shape.

https://harrisburg.craigslist.org/pts/d/willys-vintage-snowplow/6734144764.html

“This 6′ Meyer plow rig is the original setup for the Cj2a Willys Jeep. It is in complete very nice condition. It should fit Jeeps from the 40’s up to the early Cj5’s from the 60’s. It will be a great accessory for your antique or you can use it to plow your driveway. Please email if you are interested and thanks for looking.”

meyer-snowplow-pa

 
To Top

CJ-5/CJ-6 Floor Pan Bella Vista, AR $650

• CATEGORIES: Parts

Maybe someone can use? A new one from Kaiser Willys is about $800 after the oversize shipping fee. This one does have a little notch cut out of it.

https://fayar.craigslist.org/pts/d/replacement-jeep-floor-pan/6761482410.html

cj5-floor-pan-mo

“STOP acting like Fred Flinstone. Replacement front floor pan for Jeep CJ5/CJ6/M38A1. FREE DELIVERY in NWA area!! $650 or best offer, reasonable offers will be considered. This is the floor pan with the removable transmission hump so you can work on your transmission without having to pull the tub off.

Stop staring at the ground rushing under your feet on those trail rides & resting your shoes on the frame rail and transmission, put in a new floor! Save yourself some money on shipping & get started on fixing your old Jeep tub! Adventure awaits!”

 
To Top

Porter & Reed Hardtop Redding, CA $700

• CATEGORIES: Parts • TAGS: .

This is one of the nicest Porter & Reed hardtops I’ve seen.

https://redding.craigslist.org/pts/d/jeep-cj-hardtop/6762255060.html

“Real nice aluminum hard top and full tool up doors. Came off a Willy’s Jeep
$700”

porter-and-reed-hardtop1 porter-and-reed-hardtop2

 
To Top

Cab Enclosure Hardtops

• CATEGORIES: Parts • TAGS: .

Here are the Cab Enclosure hardtops for sale.

  1. Silverton, OR $600: https://salem.craigslist.org/pts/d/willys-jeep-hardtop/6758438755.html
  2. Lexington, SC $350: https://columbia.craigslist.org/pts/d/willys-jeep-arctic-top/6759879301.html
  3. Gig Harbor, WA $750: https://seattle.craigslist.org/tac/pts/d/willys-hard-top/6758499587.html
 
To Top

Bumper Weight Tanner, AL $225

• CATEGORIES: Parts

Is this one thicker than other bumper weights I’ve seen. How many different types were there? Were their different weight amounts, too?

https://huntsville.craigslist.org/pts/d/original-jeep-farm-weight/6754949285.html

“Original front Jeep weight. Was told it is for a CJ2A, CJ3A farm jeep. Weighs app 285 lbs. Good original cond. No cracks, breaks or welds. 225.00
No TEXT or Emails.”

cj2a-bumper-weight-tanner-al

 
To Top

Bed Extender? Ham Lake, MN $150

• CATEGORIES: Parts • TAGS: .

I’ve never seen one this long.

https://minneapolis.craigslist.org/ank/pts/d/jeep-extendabed/6760319546.html

“Rare Jeep extendabed. Fit older CJ Willys Jeeps. $150.00 or B/O. Would like to sell before it gets covered up with snow.”

extended-bed-hamlake-mn1 extended-bed-hamlake-mn2

 
To Top

Meyer 5ft Blade Edwardsburg, MI **SOLD**

• CATEGORIES: Parts

UPDATE: Still Available.

https://toledo.craigslist.org/pts/d/jeep-willys-snow-plow/6750280247.html

“THIS IS JUST FOR THE BLADE.
Meyer 5 foot snow plow blade with angle cylinders and new hoses.
Was on a Jeep/Willys CJ3B/CJ5.
Plow was used 4 times last winter
Selling because putting snow blower on tractor
Email phone number and a good time to call you back
Price is firm and no trades
Cash only”

meyer-snow-blade-southbend-in2 meyer-snow-blade-southbend-in

 
To Top

Hickey Dual Wheel Adapters

• CATEGORIES: Parts • TAGS: .

The seller didn’t know the brand, but they look like the Hickey adapters.

“Dual wheels adapter set for willys jeeps Used New old stock . 5.37″ wide approx .Included 5 left and 5 right thread studs .Has no markings on adapters, paint has minor scratches.”

View all the information eBay

hickey-dual-adapters

 
To Top

New Tiger Top Fairburn, SD $500

• CATEGORIES: Parts

Sounds like a good price.

https://rapidcity.craigslist.org/cto/d/new-jeep-cj-mb-soft-top/6754443228.html

soft-top-tiger-top

“It’s a complete, brand new, Softop-Tiger Top with all the hardware, fabric deck, one-piece full fabric doors and windows. There’s nothing else to buy to get that classic look on your older Jeep. List price $949.99.

For 1941-1949 CJ-2A & MB models.
Durable reinforced snaps designed to fit factory-original snap placements in body tub.
Really cool clear zip-up 30-mil side panel windows and rear curtain window with tie straps.
One-piece full fabric doors with clear vinyl zip-up 30-mil windows.
Iincludes new frame hardware treated for resistance to corrosion and scratches.

Selling because I want to go back to Army canvas”

 
To Top

CJ-2A Half Top Glens Falls, NY $150

• CATEGORIES: Parts • TAGS: .

It’s probably later than a ’48 top, but should fit a ’48 CJ-2A.

https://www.facebook.com/marketplace/item/227495054729580

I have the doors all the door skirt parts Windsheild Half cab hard top paint peeling missing back window half windows have cracks in glass but metal is all in good shape besides windsheild which is in fair shap”

cj2a-halfcab-glenfalls-ny

 
To Top

Dualmatic Hubs Butte, MT $400

• CATEGORIES: Parts • TAGS: .

UPDATE: Still Available.

(11/14/2018) Kris has this set of rebuilt Dualmatic Hubs. Email him at wyantk@hotmail.com.

dualmatic-hubs--1 dualmatic-hubs--2 dualmatic-hubs--3 dualmatic-hubs--4

“These are a set of Dualmatic Lock-Out Hubs. 10 spline. They were taken off a mid-50’s Willy’s Truck. These are the “short model”. With the cap they’re about 2″ tall. This set has been fully restored. They have been thoroughly cleaned, wire wheeled, sand blasted then powder coated. Not Painted!! New Dualmatic sticker on the center of the cap. These will even come with the correct stainless steel dual-tab lock washers that have seemed to all but disappeared. The stainless steel mounting bolts are not included, however the cleaned originals will be. Continue reading

 
To Top

Edmund’s Dual Intake Fish Creek, WI $1850

• CATEGORIES: Features, Parts

Al’s selling this rare Edmunds 2X1 intake manifold. If interested, contact him at Lhead663@aol.com. (Was on eBay)

edmunds-dual-intake1 edmunds-dual-intake2 edmunds-dual-intake3

 

 
To Top

Boston Hardtop Placerville, CA $500

• CATEGORIES: Parts • TAGS: .

This is a Boston Hardtop that looks in good condition. Not many of these on the West Coast.

https://sacramento.craigslist.org/pts/d/flat-fender-jeep-hard-top-for/6756486986.html

“Hardtop for Willys Jeep. It is very well made. It is not a Koenig because the doors are suicide doors. It was on a 1946 CJ2A. It literally installs and uninstalls in less than 5 minutes. Six over-center clips to the rear tub and two wingnuts over the windshield and it is on or off. Very handy and very waterproof. Easy to lift off with two people. Suicide doors open right back to flush with the body.”

hardtop-placerville-ca0 hardtop-placerville-ca1 hardtop-placerville-ca2

 
To Top

Monroe 3Point Parts Cincinnati, OH **SOLD**

• CATEGORIES: Parts

UPDATE: **SOLD** Was $500.

“Monroe Hydraulic reservoir, valves, and pump for a Monroe 3-Point lift for a Willys Jeep.
Came off a 1948 CJ2A”

monroe-3point-oh

 
To Top

PTO and Rear Gearbox w/ Drum Pulley Jonestown, PA **SOLD**

• CATEGORIES: Parts

UPDATE: **SOLD** Was $650.

Does not include drive shaft.

“Original cast iron pulley, no drive shaft. Great for restoration project…they dont make these any more. Asking $650”

drum-pulley-and-pto

 
To Top

1960 Koenig Half Cab Madison, WI Make Offer

• CATEGORIES: Parts • TAGS: .

Has surface rust, but appears solid.

https://madison.craigslist.org/pts/d/1960-koenig-half-cab-for-jeep/6752044616.html

“Vintage 1960 half cab for Jeep …. good offer will take it home. You are buying only the Jeep top pictured… you are not buying Jeep truck just the cab off this Jeep.”

koenig-half-cab-madison-wi

 
To Top

Free-Lock Hub Parts

• CATEGORIES: Parts

These are parts for a later model Free-Lock hub.

View all the information on eBay
“These hubs were found on the shelf of an old jeep dealer, the one seems to work fine when tested on the bench, the other has some spline damage where it slides over the axle.”

freelock-hub-parts

 
To Top

Fiberglass Tub Dover, PA $500

• CATEGORIES: Body Parts, Parts • TAGS: .

UPDATE: Still Available.

It’s not clear to me who manufactured this tub, but I have seen a couple like this now.

https://www.facebook.com/marketplace/item/220299658683916

“This is a cj2a cj3b tub, hood fenders and grill. I will throw in a rolling frame with axles. Build your own rock buggy.”

fiberglass-body-dover1 fiberglass-body-dover2 fiberglass-body-dover3

 
To Top

PTO Equipment and Parts Bowling Green, KY

• CATEGORIES: Parts

Lonnie is selling some of his PTO equipment. He’s got some interesting items for sale. You can contact him via the phone number below or through the CJ-2A Page.

https://www.thecj2apage.com/forums/original-jeep-farm-equipment-for-sale_topic43682.html

“Cheap Jeep is selling his collection of Original Farm Equipment he has collected over the past 13 years. He gave each of the 6 Grandchildren a jeep and what equipment they wanted. The remainder is listed below for sale. Please email or call him personally for questions (270)-670-9038. His health has made it impossible to show any more.

Items:                                        Price:
Newgren Pond Scoop                $200
Stockton Pond ScoopSale           200
Concrete Mixer                             250
Stockton Grader Blade                 250
Monroe Lift                                  2300
Steel Belt Pulley                            600

He has several jeep parts and will add as inventory is completed.”

 
To Top

Anyone Recognize This Seat?

• CATEGORIES: Features, Parts

Robin just purchased this unusual seat. The seller told him it was removed from a jeep. Anyone recognize it?

unusual-seat-robin1 unusual-seat-robin2 unusual-seat-robin3 unusual-seat-robin4 unusual-seat-robin5

 
To Top

Koenig CJ-2A Hardtop Palisades, WA $400

• CATEGORIES: Parts • TAGS: .

Could be a good price.

https://wenatchee.craigslist.org/pts/d/koenig-cj2a-steel-top/6751572161.html

“Koenig hard top off ’47 CJ2A. Steel, windows roll up and down. Crack in cab window. Nothing fancy, but serviceable for those cold days coming. Bring someone with you to help load.”

cj2a-koenig-hardtop-palisades-wa

 

 
To Top

MB/CJ-B Hybrid Body on Chassis Bothell, WA $550

• CATEGORIES: Parts

Odd body. It may be an MB/GPW body that’s got a raised cowl?

https://seattle.craigslist.org/est/cto/d/1953-willys-cj3b/6750197329.html

“1953 Willys CJ3B tub, fenders, hood, and grille. Sitting on later model CJ frame and running gear. Have Washington state title.”

1953-cj3b-sea-wa1 1953-cj3b-sea-wa2 1953-cj3b-sea-wa3

 
To Top

Repro Body Kit Port Crane, NY $2250

• CATEGORIES: Body Parts, Parts

This painted, but never installed reproduction body has the M-38 indents with the MB/GPW dash. This should work well for someone. Interestingly, it does now have a gas inlet hole on the driver’s side.

https://binghamton.craigslist.org/pts/d/new-steel-jeep-body-kit/6749282778.html

“New steel Jeep body. This is a reproduction kit for a military M38 but could be used for any early Willys. The kit includes the new body, tailgate, hood, fenders and grill. The body has been painted but has never been mounted on a chassis. Everything is rust free so it would be a great way to restore your old Jeep without dealing with metal repair.”

steel-body-repro-kit-portcrane-ny0 steel-body-repro-kit-portcrane-ny1 steel-body-repro-kit-portcrane-ny2 steel-body-repro-kit-portcrane-ny3