UPDATE: **SOLD** Was $270.
I can’t tell if this fits CJ-5/6 or CJ-2a/3a.
“Willys Jeep roof and behind the seats enclosure is a little rusty but in usable condition or could be restored. Other sheet metal parts available.”
UPDATE: **SOLD** Was $270.
I can’t tell if this fits CJ-5/6 or CJ-2a/3a.
“Willys Jeep roof and behind the seats enclosure is a little rusty but in usable condition or could be restored. Other sheet metal parts available.”
Old stock glass.
“Willys Glass Vintage Truck & Wagon
Recently Acquired 60 pieces of 40’s through 60’s old stock glass.
Windshield two piece Split only.
Wing none.
Doors.
Cargo Sliders & Stationary.
Cargo curved.
Cargo rear hatch.
Cab back truck none right now
Price @ twenty five to 55 per size & condition.
Prefer phone call will reply to emails with request for phone calls.”
Ted posted these Monroe 3 Point parts on eBay. View all the information on eBay
1. Monroe 3 Point View all the information on eBay
2. Monroe 3 Point Arms View all the information on eBay
Mike has these parts left over from a project he just completed.
“Left over parts from a Willys Jeep rebuild. Parts include: two 6V windshield wiper motors, M151 speedo meter gear kit (new), steering wheel, air cleaner passover tube, fan belt pulleys, 6V cigarette lighter, distributor for 225/231 6 cylinder Buick engine with wires, 2 distributor caps, speedometer gear, flywheel, hood clamps, ammeters,fuel gauge(6V and 12V),12V Accel coil, brake cylinder (needs rebuilt), other misc stuff also.
Call for individual prices or take all for $250.”
UPDATE: **SOLD**
Seller has a variety of parts.
“T-1 air compressor for military willys jeeps, Has the motor mount with it . Many other old willys jeep accesories like post hole digger, capstan winch, koenig winch, cj2a rare parts, middle seat for cj5 interested email or call I might the piece you are looking for. many rare willys jeep parts for sale”
UPDATE: **Status Unknown**
“Willys Overland Truck, Wagon parts 1950 – 60’s.
Picture are of parts stored on open shelving not intended to represent all available.
I also have body parts listed on Craig’s.
A 1950 Willys Wagon, running project & a 1948 Willy Truck, restoration project are also listed.
Parts are old stock, some will fit pre-1950 trucks wagons, jesters, cj’s, primary exceptions are fenders, grill, & lighting parts.
Parts came from dry Central OR. sources.
Parts acquired with other jeeps, off parts trucks, or separately, some from project replacements.
Parts priced on sight are negotiable per condition, haggling expected.
Prefer phone call will reply to emails.
Items deleted if not available”
UPDATE: **SOLD** Was $500.
This model 330 has the vertical rear doors.
“Original hard top and doors for 1948ish Willy’s Jeep. Very straight good condition.”
UPDATE: Was $185. **SOLD**
Looks in good shape.
“1950/52 Willy’s flat fender jeep hood.
Raised design for air filter clearance. Silver color. Fiberglass. Front latches not included. Hood ONLY.”
It needs some work.
“Monroe 3 point hitch with reservoir and lines. The hydraulic housing is cut but can be repaired by an experienced welder. The cylinder, lines & reservoir all were full of oil and move freely.”
UPDATE: **SOLD** Was $450.
These are rechromed bumpers that Dan spotted. I’m sure someone could use them.
“All pieces have new chrome, brackets have been blasted & have fresh paint-
Rare embossed “Willys logo”-
Excellent condition!!-”
UPDATE: **SOLD** Was Make Offer.
Looks like a DJ top.
“I am selling the hard top off of my CJ2A. Generally in good condition, however could use a paint job. Make me an offer.”
UPDATE: **SOLD** Was $500.
The seller believes this is a Beck cab, but the rear top piece is angled. I couldn’t find a top that had a similar rear piece. http://cj3b.info/Hardtop.html “Steel full cab off a CJ3B. I believe it is a Beck cab. Rear door sandblasted and painted.”
UPDATE: **SOLD** Was $100.
(11/18/2014) A rare fiberglass hood type.
“Jeep CJ2A hood, fenders fiberglass. If interested have a body tub as well for an additional price.”
UPDATE: **SOLD** Was No Price.
Maybe some value here.
“Im listing this for a friend. the pictures that are here are all I have but if your interested feel free to email.”
Needs work.
“Willys Jeep Aluminum Hartop and Doors, super light weight, came with a CJ3A, needs some work which is why they are cheap but has a lot of potential.”
UPDATE: **SOLD** Was $300
The hubs include a storage box.
“These vintage 1950s WARN hubs are used to convert jeeps and other Willys vehicles from full-time four wheel drive to two wheel drive by replacing the grooved 4WD hub with a non-grooved hub. An integral needle bearing and a separate bushing support the splined axle end in the non-grooved hub.
They are called “summer” hubs because owners would remove the early full-time 4WD hubs from their vehicles during the summer when 4WD was not required, to increase gas mileage, and to reduce wear on tires and drive train parts. They are also attractive with the “waffle” pattern and script “Warn” on each shiny aluminum hub.
UPDATE: Pics now provided.
“47 Willys Fiberglass Jeep tub and hood. Need some fiberglass repair in the firewall, but no cracks. In good condition. $700.00”
UPDATE: **SOLD** Was For Trade.
Seller wants Linkbelt setup.
“Want to trade a NOS Braden capstan winch for a Linkbelt setup.”
Eliecer has listed some GPW parts on eBay.
1. T-84 transmission gasket kits:
UPDATE: **SOLD** Was $300.
Daryl has this halfcab for sale at a good price.
“This is a halfcab in good shape. All glass is intact and door windows roll up and down.
Fits CJ5 from 1955 to 1975. Will also fit M38A1.”
The black one is 800 and the other is 600
“I have two willys jeep tubs for sale
Also have other body parts and jeep stuff for sale
niether body is perfect but are good starts”
Bob Christy has got this for sale on eBay.
“This is the head from a World War II ford GPW jeep. This will fit a willys jeep flathead motor but is made and stamped for the ford version of the Willys mb jeep. It is an “F” script marked part. The casting number is GPW 6050.
This head has been stored for about 30 years in a building. I cleaned it up a bit, took the plugs out of it. Other than that I know nothing about this head, other than it goes on a gpw. The spark plug holes are nice and clean and the gasket surface looks to be in good shape with no pitting or anything. It does not appear to have any cracks or anything but should be checked thoroughly before being installed on your jeep.”
UPDATE: **SOLD** Was $275.
Here’s a vintage Scheneker Snowplow at a good price.
“Complete 7′ snow plow off Willys CJ-2A Jeep. Includes the complete blade with skids, upper frame, lower frame, pump, hose, and pump mounting bracket. Works good. It is a nice design that includes braces for the Jeep frame and an easily removable lower frame to improve ground clearance. A small piece of the cutting edge is broken off on one side. The blade was a 6′ and was widened to 7′ many years ago. It could be easily cut back to 6′, but my Jeep pushes it fine. The pump originally mounted on top of the generator on the motor, but I made 2 brackets to attach to the original flathead motor or a Jeep Dauntless V-6. One of these with it if you need it. The unit was made by Scheneker Iron Works.”
UPDATE: **SOLD** Was $400.
Has potential. Includes doors.
“I am selling a hardtop that came off of a 53 Jeep M38a1. It was on my 73 CJ5 and it looked good.
The hardtop is old and needs paint but the glass is in good condition. It is priced to sell at $400.”
No pics provided.
“1941-45 WILLYS JEEP top and doors w/ windows
These are in perfect condition for your restoration project!
Good glass and rubber. NO RUST!
You gotta see these!
Make an offer”
http://seattle.craigslist.org/tac/pts/4813002430.html