UPDATE: Lee has another set of four slot rims like the ones pictured below.

https://cosprings.craigslist.org/wto/d/pueblo-jeep-bronco-15×7-slotted/7480936710.html

“MAKE OFFER for this vintage matching set of (4) slotted aluminum 15×7’s that are 5 lug hole 5×5.5 inch bolt pattern. The 5×5.5 inch bolt pattern should fit the early and later Ford Broncos and F-100, F-150 Pick-Up Trucks. I believe that theses may also fit Jeep, Jeep CJ Renegade, Jeepster Commando, CJ5, CJ6, CJ2A, CJ3B, CJ3A, and CJ7.

Also, the lug holes look good and the center hole measures approximately 4.25 inches. 5 on 5.5 inch bolt pattern. Back spacing is 3 and 3/8ths inches.
“

These are getting hard to find.

https://portland.craigslist.org/clc/wto/d/oregon-city-15×8-steel-wheels-5×55/7475470418.html

“15×8 Steel Wheels, 4” Backspace, 5×5.5 bolt pattern.
Powder coated black back in ‘07, some rusting coming through the powder coating, will need refinished if want perfect…. Vintage wheels Came off my old GPW, fits a lot of old Jeeps, Dodge, Ford trucks as well as some Geo, Daihatsu etc. Awesome rat rod or 4×4 wheels !!”

Someone was looking for 16″ rims.

https://buffalo.craigslist.org/pts/d/mars-willys-jeep-cj2a-cj3a-wheels/7464077151.html

“I am selling a set of four Willys CJ3A (can also be used on a CJ2A) that are in excellent condition. These have been in an interior storage facility for years and have no rust or the typical pitting. I don’t see any significant areas of rust, etc. These wheels are 16″ x 4 1/2″.

These need a quick blasting and will be ready to paint. I have some older CJ2A wheels and can include a fifth wheel if you need a complete set. Please drop me a note or call if you have any questions. Open to reasonable offers, but please keep in mind that repo wheels of this era run about $180 ea.

I also have a very nice F-134 engine with T90 transmission and Dana 18 transfer case. I will be listing those in a few days.”

UPDATE: **SOLD** was $500.

Maybe somebody can use these?

“4 new (been in storage 40 years) buckshot wide mudders.8.5 wide.850 tread 32.5 tall.p78-16lt 6 p”

Blaine spotted these rims. I think there are 4(?) rims?

https://portland.craigslist.org/clc/wto/d/clackamas-rare-16×9-slotted-aluminum/7357118956.html

“Rare 16×9 slotted aluminum mags 5×5.5 … Old school 5×5.5 wide center hole aluminum slotted mags with lug nuts. I had these on my 1981 Dodge Power Ram. They will fit Jeeps, Dodge, some Fords and a few other 4 wheel drive vehicles. Center hole is 4″ for large hubs.”

Blaine found this ad. It could be a good price on Kelsey Rims.

https://ventura.craigslist.org/pts/d/ojai-jeep-parts/7334956648.html

“1967 CJ 5 parts
7- Jeep cj5 wheels 5×5.5 bolt pattern 2 with tires holding air 25 each
4- Jeep yJ wheels 5×4.5 bolt pattern with out tires
Fly wheel & clutch $75
Exhaust manifold $50
Rear end Dana 44 $175
Front Dana 27 $175”

These look like a good price.

https://www.facebook.com/marketplace/item/484457745994598

“4 – 1981 Jeep CJ7 factory aluminum wheels 15″ x 9″ – $300 for all 4”

UPDATE: **SOLD** Was $30.

If you need some cheap rims, these ought to work. Seller has a bunch of other jeep parts, but isn’t specific about what.

“Solid wagon wheels removed from the 1983 CJ seven, i’ll do a width and backspacing addition to the listing later but they’re pretty standard,I have many jeep parts please ask and I’ll check my storage I have too much crap to even remember”

UPDATE: **Sold** Was $200.

I haven’t seen turbine rims pop up for sale in a while.

“Vintage aluminum 15”x10” Western Turbine Hurricane wheels with 5×5.5” bolt pattern. These wheels fit a variety of trucks and SUVs including certain Dodge, Ford, Jeep, Kia, Mitsubishi, Willys, and other vehicles. Check your wheel hub for the 5×5.5” bolt pattern or do a GOOGLE search to check your specific application. These work and look good on both an old-school or late-model ride if you’re running a large format all-terrain or mudder tire. Asking $200 OBO for the set. Phone, text, or email me for additional information, thanks.”

Maybe someone can use these?

https://seattle.craigslist.org/see/pts/d/lynnwood-willys-jeep-repro-combat-rims/7325568073.html

“New in box reproduction MB or GPW combat rims 6 x 16 . $300 for both”

UPDATE: **SOLD** Was $150.

Looks like a good price.

“I have a set of 4 15×12 5×5.5 deep dish steel wheels with a 3.75″ backspacing for sale. They fit old ford dodge & jeep. Asking $150obo”

UPDATE: **SOLD** Was $360.

Maybe someone can use these?

“This is a set of Kelsey Hayes steelies which measure 16×4.5 and have a 5 on 5-1/2” bolt pattern. I am asking $90ea for a total of $360. The exterior face has been reconditioned. Lug holes are all in great shape along with the valve stem holes. These wheels could be found on Military Jeeps, Internationals, Willys and other vintage vehicles from the 40’s up thru the 60’s. If you are restoring a classic and need a nice set of time period correct wheels, these just may fit the bill.”

UPDATE: **SOLD** Was $150.

Maybe someone can use these?

https://www.facebook.com/marketplace/item/1580735935449264

“These are 2 turbine rims for a vehicle with a 5×5.5 bolt pattern. All rims are in good shape with no cracks. Please ask any questions thanks for looking I only have 2”

Blaine spotted these rims. I’m sure someone can use them.

https://boise.craigslist.org/wto/d/boise-kelsey-hayes-15×8-jeep-wheels/7270697563.html

“Set of 5 15×8 kelsey hayes wheels that were factory on some models of jeeps. 5×5.5″ bolt pattern.”

There are folks looking for these.

https://www.facebook.com/marketplace/item/151832063126790

“Original Equipment, needs a good cleaning. The spare is banged up. See Pictures. Made by American Racing.”

UPDATE: **SOLD** Was $300.

Someone was looking for rims like these.

“5 original wheels with good traction tires from a 1953 Willys cj3b jeep.
Will fit 2a 3a 3b and cj5.
5 on 5 1/2 steel wheels–15 inch-ORIGINAL.
$300—–OBO”

These look in good shape. They came off of a 1960 FC-170.

https://twinfalls.craigslist.org/wto/d/bellevue-early-jeep-rims/7239041644.html

“Early vintage Willys Jeep 5 lug steel wheels. Set of four, 15” wheels. Sandblasted clean, no cracks one with small wrinkle on rim lip. One with hub cap clips. Stamped 15×4.50 E with 59 and 60, dates? Off 1960 Jeep Forward Control, I upsized to 16” rims.”

Seems like a good price.

https://boise.craigslist.org/wto/d/boise-set-of-2-jeep-combat-rims/7215122368.html

“Set of 2 JEEP COMBAT RIMS. Split original military 16 inch x 5 1/2 inch. Rims have been sandblasted and in Good Condition. Primer paint is on and ready for the final color. They fit the Willy’s MB and Ford GPW.”

Glenn spotted this ad and notes that the seller has a variety of Willys-related items in his warehouse.

View all the information on eBay

“This auction is for one pair in good condition 15″ X 4″ width 4 lug I have 2 pairs available. Fits 1952- 1955 Willy’s with 4 lugs. 1955-1965 DJ3 Dispatcher & Surrey, please review all photos before bidding. Shipping & Handling $ 46.50”

Mitch’s cousin has these terra tires stolen out of their grandmother’s shop. Feel free to email me at d @ deilers.com (no spaces around the @) if you see or know anything.

“Typical 31×15.50-15 terras. Stolen from Snohomish County, WA sometime in the last 2 months. Wheels are unique- widened Kelsey Hayes wheels as pictured. 3 have the correct centers, one has had the center crudely replaced with a Ford style center. Torched the opening larger for jeep fitment, crude welds maring the center to the rim.

Stolen from my cousin out of my grandma’s shop. Shop doesn’t get checked very often so we don’t know exactly when they disappeared, but he bought them less than 2 months ago. Should be easy enough to ID.”

Maury shared this ad for 4 Renegade rims. These aren’t too easy to find.

http://www.earlycj5.com/xf_cj5/index.php?threads/4-wheels-from-a-1971-cj-5-renegade.143487/

UPDATE: **SOLD** Was $150.

Seems like a fair price.

“A set of WWII combat wheels. Rusty and dirty but should clean up. Tires are shot, still have the beadlock rings inside.”