To Top

1946 GPW Phoenix, AZ $16,000


Joe-in-Mesa’s friend is selling his GPW. It’s in good shape.

“Only selling due to health changes, willing to negotiate, please make a fair offer. Can deliver for extra fee. This is a WW2 Jeep with low miles, runs like a dream. Very fun to drive in the desert. Recently restored. Majority is original 1940s-1950s parts. Has canvas top in good condition. Military vehicle great for collectors, historical, and the black out lights work too!”

1945-gpw-phx-ariz6 1945-gpw-phx-ariz7 1945-gpw-phx-ariz8 1945-gpw-phx-ariz9

To Top

1958 CJ-3B Athens, TN $12,000


This could be worth a look.

“Restored classic Willys. Clear title and registered. This vehicle is been kept in Athens TN”

1958-cj3b-athens-tn8 1958-cj3b-athens-tn9

To Top

Braden Capstan Winch Palmyra, TN $1200


Tom shared this Capstan winch for sale.

“Working winch very rare item, selling as is make an offer”


To Top

1947 CJ-2A Fordyce, NE $5000


This runs on propane.

1947-cj2a-fordyce-ne7 1947-cj2a-fordyce-ne8 1947-cj2a-fordyce-ne9

“1947 Willys Jeep. Converted to propane. Runs good. New tires. Miles on it are Exempt. Only Serious inquiries please”

To Top

1947 CJ-2A Dually Blackwater, VA $1500


There might be some value here given the rear duallies.

“If it’s listed it’s still available! no title bring a trailer Willy’s Jeep 4cyl 3speed 4wd Dual real wheels”

1947-cj2a-blackwater-va8 1947-cj2a-blackwater-va9

To Top

1950 Jeepster Ray, OH $13,000

• CATEGORIES: Jeepster

It’s been parked for a few years.

“1950 Willys Jeepster, Jeep ran when it was parked about 5 years ago. Needed break lines. Pads swelled up wile it sat. Had to pull them to get it to roll. I’m posting this for my mother. I forgot to look at the mileage. I believe it’s around 40k. If posting is still up, it’s available. The longer it’s here, the more I’ll get done to it. I plan to get it running first. Then it will get brake lines. Which also means the price goes up. Please, don’t send us low ball or pointless messages offering half price. I get messages constantly. We have planned to sell this for over a year. I’ve watched the auctions. I’ve seen some that are far worse go for 20k. The price is 13k… That’s what we need. Show me one for less.. And it’s yours for the price.”

1950-jeepster-ray-oh5 1950-jeepster-ray-oh6 1950-jeepster-ray-oh7 1950-jeepster-ray-oh8 1950-jeepster-ray-oh9

To Top

1951 CJ-3A Springville, IN $1000


Given it includes a couple engines, maybe there is some parts value here.

“Comes with a couple motors and transmissions extra set of axles and doors needs lot of love !!”

1951-cj3a-springville-in7 1951-cj3a-springville-in9 1951-cj3a-springville-in8

To Top

1958 FC-150 Rushsylvania, OH $5000

• CATEGORIES: FC150-FC170-M677

The body will certainly need work.

“1958 Jeep Willy’s FC150: will need towed away. Needs fuel tank and brakes will start. Selling this for a co-worker. $5,000 OBO!!!!”

1958-fc150-rushsylvania-oh5 1958-fc150-rushsylvania-oh6 1958-fc150-rushsylvania-oh8 1958-fc150-rushsylvania-oh9

To Top

Porter & Reed Hardtop Cleves, OH $300


Could be worth a look.

“Aluminum top and doors produced by Porter and Reed for a Willys CJ2A . Don’t know much about it, make me an offer.”

porter-and-reed-hardtop110 porter-and-reed-hardtop11 porter-and-reed-hardtop12

To Top

1948 CJ-2A Sedgwick, KS $1250

• CATEGORIES: CJ-2A, Last Ride

This one is rough.

“Early civilian Willys Jeep in rough shape. Parts, project, wall art, yard art, Rat, the choice is yours. Has rust holes but it’s not a salty rot box. Floors have been patched all around. What you see is what I have. No title. Might be able to help with that for expenses,but you would need to help me confirm year and model and serial location correctly so I don’t have it wrong. Not sure of the exact model or year built. I know it’s the internet but please don’t roast me. I’m a Ford/Mopar/GM guy LOL.”

1948-cj2a-sedgwick-ks7 1948-cj2a-sedgwick-ks8 1948-cj2a-sedgwick-ks9

To Top

1946 CJ-2A Cedar Rapids, IA $10,000


UPDATE: Price dropped to $10,000.

(05/25/2021) Is there a little rust along the driver’s side? I can’t tell for sure.

1946-cj2a-cedarrapids-ia6 1946-cj2a-cedarrapids-ia7 1946-cj2a-cedarrapids-ia8 1946-cj2a-cedarrapids-ia9

“***I am helping a friend sell this, please be patient and I will answer questions as I am able to relay them and get a response*** VIN: 38222 1946 Jeep Willys CJ2A 77 year old vehicle in fantastic condition has minor dings here and there but no major dents or damage to body or frame. Has some surface rust on undercarriage as shown. Needs a little TLC and can be a great winter project. Starts every time, but can be a little touchy with a one barrel carburetor. Numbers matching engine, original dash information tags included. Mostly original except basic maintenance items. Also unsure about the paint being original. Unlikely, unless the paint is very faded because research suggests the factory blue would’ve been much darker. New battery in 2019, whole fuel system replaced, fuel filter, fuel tank all done by Hubbell’s Auto Repair in Marion, IA. Had professional welder check over undercarriage and did frame brace welding work. Factory storage bin under passenger seat was professionally refabricated and welded by the same welder and he did a great job. Factory bikini top included. Originally 6V converted to 12V prior

To Top

1947 CJ-2A Central City, NE $5000


UPDATE: Still Available.

(12/24/2022) This has a variety of mods.

“Has a 4 core aluminum radiator, 77 Buick 231 even fire, Muncie Sm 420 4 speed transmission, original transfer case and axils 2 inch lift springs, front disc brakes, power steering, has some rust, needs a master cylinder and a little electrical work, runs good. Mainly needs cosmetic. Clean title”

1947-cj2a-centralcity-ne47 1947-cj2a-centralcity-ne48 1947-cj2a-centralcity-ne49

To Top

1942 GPW Seattle, WA **sold**


Update: **Sold** was $2500.  turns out this was an 1942 GPW.

Includes a Capstan winch. Thanks to David for sending this one. The grille is likely from a DJ-3A.

“Barn Find……Willys Jeep MB, approx. 1946 with Arctic Cab, factory capstan winch, rear hitch, solid cross members underneath. Unknown mileage. Manual and a few parts. Includes 2 rusty 9 slot grills. Who needs a cool project? No registration found…..yet. Estate clearance. Must move. $2500. Best to phone.”

year-mb-seattle-wa5 year-mb-seattle-wa6 year-mb-seattle-wa7 year-mb-seattle-wa8 year-mb-seattle-wa9


To Top

Racer Progress Pedaling Along

• CATEGORIES: Builds, Features • TAGS: .

More progress made on the racer this weekend. The floors are installed and mostly bolted. The pedals are all in place. The steering was in place, but I was unhappy with the final angle of the front support bearing, so I plan to redo that support so that it angles differently. Hopefully, I will get that done and installed today.

Here’s how the rear top crossmember that holds the rear fire extinguisher looks. The two holes on either side are the shoulder strap attachments.


Here are the three pedals (with the steering drive shaft disconnected from the quick-turn unit).


One thing I still need are a brake and clutch pedal pad. Any recommendations on what I can use that has a similar mount point and size? (these were from the yellow racer .. I didn’t like the other racer’s pedals). These look to be rubber casings over metal pedals, but both pedal bolts are in bad shape. this is the good one …

pedal2 pedal1

The master cylinders are attached (the brakes are ready to go). I have to get an adapter to connected the clutch line to the clutch master cylinder. Everything is fitting well. I have to say the fire wall turned out better than I thought. Remember, I flattened the old firewall from the yellow racer and re-bent it into the shape I wanted.


Here side view of the gas pedal setup. One thing I learned from my first race jeep was that having a firm, stable gas pedal was greatly beneficial when racing, due to the bouncing. I could plant the bottom of my foot firmly, while using the top of my foot to feather the gas. This setup is based on what I built for Biscuit, but heavier duty.

Continue reading

To Top

Mahindra’s Thar.e EV

• CATEGORIES: Features

Bill shared this article about Mahindra’s EV Prototype called “Thar.e”. Some folks seems to like the design, but I can’t say I’m a big fan. To angular for my tastes. I expect it will have 4 wheel drive or All wheel drive, but those details haven’t been released (or so indicates the article below).


To Top

1960 CJ-3B Hutchinson, KS $18,500


Not 100% original, but appears pretty original.

1960-cj3b-hutchinson-ks7 1960-cj3b-hutchinson-ks8 1960-cj3b-hutchinson-ks9

“This is an original 1960 Willy’s CJ3B in excellent condition. Has 39,780 actual miles and runs, drives perfect. I bought it from the 2nd owners, an elderly couple who were retired and not using it any longer. It had been stored in their heated garage for the last 32 years and started or driven occasionally. It looks exactly like it does in the photos and starts and runs perfect. It’s a rare high hood 3B and in original condition. Has has had a very rare passenger side fuel tank installed and looks factory. 4X4 works perfect, heater works, and stops like it should. Original 16″ wheels with new 700×16″ non-directional tires(100 miles). Seats do not have any rips or tears on them and the floorboards have no rust. Has horn and blinkers. We drive it about 2 times per week for ice cream outings. Nothing to do to this jeep but drive it. Will sell for $18,500 or consider trade for nice 60s or 70s muscle car.”

To Top

1949 Jeepster Hawk Point, MO $7500

• CATEGORIES: Jeepster

Seller says it has a vibration problem. Might be worth a look.

“I bought this but have other jeep priorities. It starts and runs but had a vibration at over 25 mph. It’s been in my barn for 2 years. Firm on the price. Thanks. Would consider interesting trade”

1949-jeepster-neomesha-mo6 1949-jeepster-neomesha-mo7 1949-jeepster-neomesha-mo8 1949-jeepster-neomesha-mo9

To Top

1986 Mitsubishi J53 Leavenworth, KS $12,000


JW is selling his J53, because he bought an M-38 (which he found on eWillys).

“This 1986 J53 diesel Jeep is in great shape and it runs fantastic. Truly a rare Jeep, there are not many like it in the United States. It has more power than a flat fender but still has classic Willys style. If you own this you’ll have the most unique Jeep in the group. Original 30443 Km on the odometer, which is 18,916 miles. Clear title in my name. Why buy a side by side ATV or a UTV when you can have a street legal turbo-diesel Jeep!”

1986-j53-leavenworth-ks5 1986-j53-leavenworth-ks6 1986-j53-leavenworth-ks7 1986-j53-leavenworth-ks8 1986-j53-leavenworth-ks9

To Top

1949 Truck Basehor, SD $28,000

• CATEGORIES: Willys Trucks • TAGS: , .

Someone spent a lot of time and/or money working on this truck.

“1949 Willys Pickup · Truck · Driven 800 miles Frame off restoration Rebuilt F4-134 Engine T90 Transmission Negotiable”

1949-truck-basehor-sd6 1949-truck-basehor-sd7 1949-truck-basehor-sd8 1949-truck-basehor-sd9

To Top

1962 CJ-3B Durbin, WV $2500


This might be a good price.

“jeep runs and drives needs brake work and gas tank engine is good and drive train the body needs either new rear panels or a new tub. Top is like new. My son and friend took the pics i don’t have a camera so this is all the pics that will be taken so if you’re interested come look, I was going to restore it because it was my dad’s but just don’t have time”

1962-cj3b-durbin-wv7 1962-cj3b-durbin-wv8 1962-cj3b-durbin-wv9

To Top

1947 CJ-2A Lawrence, KS $11,000


Interesting sun shade on front of the windshield. The sticker in the back driver’s side corner suggests  this was a California jeep at one time.

“My grandfather restored the jeep in the early 80’s. Runs great.”

1947-cj2a-lawrence-ks-5 1947-cj2a-lawrence-ks-6 1947-cj2a-lawrence-ks-7 1947-cj2a-lawrence-ks-8 1947-cj2a-lawrence-ks-9

To Top

1949 CJ-3A Tea, SD $5000


This is only 2WD for some reason. Maybe it is related to the automatic transmission?

“2wd, auto transmission,rear 10gallon fuel tank, 1951 jeep seats, 4 cylinder, miles are unknown”

1949-cj3a-tea-sd7 1949-cj3a-tea-sd8 1949-cj3a-tea-sd9

To Top

Hobart Welder w/ Willys Engine Kennewick WA $450

• CATEGORIES: Industrial-Welder-Generator

Seller doesn’t have a way to load it.

“Hobart 250 generator welder with jeep Willy’s 4cyl motor factory motor for welder. No idea if it works or not. Weighs about 1200lbs Everything is there. Must have a way to load it.”

hobart-welder-kenn-wa8 hobart-welder-kenn-wa9

To Top

Year? CJ-2A Vilonia, AR $4500


Listed as a 1945, It appears later than that. No description provided.


To Top

1949 CJ-3A Malmo, NE $6000


It’s powered with an f-head. It appears to need work.

“Very rare! Runs and drives. Great project for someone with more time than I have. Brand new battery, brakes need attention, does come out of high and low while driving, (I use wire to keep it in gear while driving). First with cash in hand takes it away! $6000 or best offer, no low ballers, serious buyers only.”

1949-cj3a-malmo-ne5 1949-cj3a-malmo-ne6 1949-cj3a-malmo-ne7 1949-cj3a-malmo-ne8 1949-cj3a-malmo-ne9