To Top

1947 CJ-2A Hornbrook, OR $2500


No pics provided.

“1947 cj2a flat fender jeep. Sound running gear. Excellent motor. Many extra parts. Pictures on request. Almost 100% original. Great project.”


To Top

1948 CJ-2A Mineral, OR $1800


Includes a 2nd L-head.

“Jeep Project (Parts or Restoration)
48 Willys Jeep
Drive Train
Most body parts, with extra body parts as well as additional parts
Extra ORIGINAL Engine (two Go Devil 4 cylinder)
Buick V6 engine, (included but not original)
Excellent Tail gate, no rust, no dents
Extra front clip and hood in excellent condition (not pictured) Pictured fenders and Hood (Good)
Lots of small miscellaneous parts
$1800 or possible trade for F/A or MO”

1948-cj2a-mineral-ca7 1948-cj2a-mineral-ca8 1948-cj2a-mineral-ca9

To Top

1946 CJ-2A Verdii, NV No Price


It doesn’t run at the moment.

1946-cj2a-verdii-nv8 1946-cj2a-verdii-nv9

“Has a 225 v6 from a 70 buick
4 speed Manual
Dana 44s
Power steering
33x15r front driver side rotted out
Good rack
Couple dents needs some floor pan work by the trans
Seat are complete all gauges are intact

Needs work to run, starter and fuel lines to the tank/new tank and carb rebuiI have the original link slip 46 year

Trade welcome for
4×4 Quads
2 seater Side by sides
Skidoo 800 rev chassis 08 newer
Asking $4-$5k don’t need to sell
Trades plus cash on my end or your end welcome thanks”

To Top

1951 M-38 Gardnerville, NV $3800


It’s a project.

“1951 Willys M38 project my son and I started a few years ago. He has since moved away and is busy building his career, so it is time for the M38 to go. It had a Buick V-6 oddfire which was no good, so we built up a GM slightly later model V-6, which is currently in the longblock stage. Have most of the parts and sheetmetal, just needs someone to finish. Have title.”

1951-m38-gardnerville-nv7 1951-m38-gardnerville-nv8 1951-m38-gardnerville-nv9

To Top

PTO + Gearbox + Drum Pulley Spokane Valley, WA $2000


The seller has the governor handle, but not the governor assembly (if I understand correctly).

“1949 CJ3a PTO assembly with the Belt Drive adapter.

Still currently mounted in the jeep so it can be used and shown to work, planning on pulling it sometime this month. Only thing missing is the Novi Governor under the hood. I don’t intend to restore this jeep to factory and it doesn’t suit any need I have other than looking really cool.

This PTO should mount to any CJ jeep or most older Jeeps that have the Dana 18 transfer case from what I know.

I’m selling just the PTO assembly, not the whole Jeep”

pto-gearbox-drum-governer1 pto-gearbox-drum-governer2 pto-gearbox-drum-governer3 pto-gearbox-drum-governer4

To Top

1953 CJ-3A Naches, WA Best Offer


UPDATE: Still Available.

(10/10/2023) It’s a project that sounds like it must be sold.

1953-cj3a-nache-wa5 1953-cj3a-nache-wa6 1953-cj3a-nache-wa7 1953-cj3a-nache-wa8

“Selling my jeep due to divorce. I started complete down to frame restoration, I did all the no fun work leaving only the fun remaining. I have every nut and bolt. L 134 FLATHEAD MOTOR, I purchased 2 years ago and drove it home for disassembly, have changed the oil and filter, ready to roll. New carb, complete brake overhaul including new wheel cyclinders, shoes, springs, etc.. new master cylinder, radiator refurbished, new wiring harness, new ignition spark plug ignition wire set, fuel sending unit, speedo cable, brake lamp switch, anti squeak kit, body mounting rubber kit, accelerator linkage kot with throttle rod, many new parts im forgetting. frame wire brushed, painted, Cab rhino lined, bumpers, gas can spare tire rack sandblasted and powder coated. Entire body soda blasted and painted. Have original seats and custom seat with roll bar. I also have the overdrive for it. Have oringinal hard top, tires, doors, etc..This can be one nice jeep and actually already is. Just needs someone to complete it. I paid 7500 for it, prolly have another 2500 (at least) in new parts, and too many hours to mention.”

To Top

1957 CJ-6 Lodi, CA $4500


UPDATE: Still Available.

(10/10/2023) It doesn’t run.

“1957 Willy’s Jeep doesn’t run, nice project. Have the title 4500.00”

1957-cj6-sac-cali5 1957-cj6-sac-cali6 1957-cj6-sac-cali7 1957-cj6-sac-cali8 1957-cj6-sac-cali9

To Top

1948 CJ-2A Rock Island, WA $8500


UPDATE: Still Available.

(08/09/2023) I’m not sure if the driver’s side has body filler or uneven paint.

“1948 C12A
Willys Jeep

New tires and wheels
77 years old
Have more stuff
See pictures

Not texting
Not emailing
Please call”

1948-cj2a-rockisland-wa6 1948-cj2a-rockisland-wa7 1948-cj2a-rockisland-wa8 1948-cj2a-rockisland-wa9

To Top

Testimonial: A Jeep on Cemetery Duty

• CATEGORIES: Documents, Features • TAGS: .

UPDATE: This was first published just over 10 years ago on October 17, 2013.

This testimonial comes from a cemetery in Springfield, Massachusetts, that espouses the lawn-friendliness of the jeep.



To Top

Postcard of Texas CJ-6 Hunting Jeep on eBay

• CATEGORIES: CJ-6, Features, Postcards • TAGS: .

The CJ-6 shown on this postcard is described as the “typical hunting rig used throughout the Valley” and by valley they mean the Lower Rio Grande Valley of Texas.

View all the information on ebay

“Vintage Postcard – Hunter Hunting – Rifle – Jeep – Lower Rio Grande Valley Texas – TX
Standard Size Postcard
Condition – This is a vintage postcard. Please allow for age and wear.”



To Top

1946 CJ-2A New Carlisle, OH $13,500


This 2A includes a rear PTO setup with a sprayer.

“Vehicle frame off restored in 2010 has some scratches no rust. Has a PTO with Sprayer engine rebuilt in 2010 extra rebuilt starter and radiator along with extra parts including governor.”

1946-cj2a-newcarlisle-oh5 1946-cj2a-newcarlisle-oh7 1946-cj2a-newcarlisle-oh 1946-cj2a-newcarlisle-oh9

To Top

1953 CJ-3B Ocala, FL Copart Auction


The current bid price on this one is $600 with 5 days left.


To Top

1951 M-38 Gonzales, TX Auction

• CATEGORIES: M-38 • TAGS: , .

This October 28 estate auction in Texas includes a wide assortment of interesting items, including this M-38 and a 1981 CJ-7 Laredo.


To Top

1948 CJ-2A Fenton, MI $8500


This has a Worman hardtop and a Warn OD.




“1948 CJ2A Jeep it is in go devil run ready condition with its original 134ci flat head engine. It has a modern high torque starter and 12v alternator, Front and rear differential lockers, front axle has early WARN locking hubs and has been upgraded to spicer u-joint axle shafts. The Jeep also has a WARN overdrive. The brakes have been upgraded to 11in self adjusting drums from a 70/80 Cj, 3/16th plate rock sliders and step reinforcements, all lights work, large shaft Dana 18, m38 folding rear seat, has 5 new 7.00×16 proper biasply tires. This Jeep has been on many trips in the last few years, been used as a daily driver in the summer and has done lots of back road driving with my family.
Has an original aluminum hard top and is ready for winter.
Can be combined with the other Jeep parts I have for sale.”

To Top

1948 CJ-2A Lima, OH $6500


Needs some work, but might be a solid rig.

“My father is selling his 1948 Jeep Willy’s CJ2A. Needs some work but has a rebuilt motor that runs. Needs brake work, possibly suspension, and has been stored in a garage for many years. Not sure on mileage. $6500 OBO”

1948-cj2a-lima-oh5 1948-cj2a-lima-oh6 1948-cj2a-lima-oh7 1948-cj2a-lima-oh8 1948-cj2a-lima-oh9

To Top

1946 CJ-2A VEC? Corydon, IN $3700


This has a column shift on it. Note the Allstate hubs. They were made by Husky.

“1946 Willys cj2a column shift Solid old Jeep straight sides decent floors Engine bay mostly original. Doesn’t run somone has had head off not sure why. Rare Allstate locking hubs. Clean title in hand.”

1946-vec-cj2a-corydon-in4 1946-vec-cj2a-corydon-in5 1946-vec-cj2a-corydon-in6 1946-vec-cj2a-corydon-in7 1946-vec-cj2a-corydon-in8

To Top

1942 GPW May, TX $9000


This GPW had a “pending” added to the post, so it may be sold. Thanks to Joe-in-Mesa for forwarding this one.

“For sale:  $9000.00. Authentic Ford GPW WWII Military Jeep. Clear Texas blue title. SN on frame matches SN on tab on glove box lid. Both SN match the title. Frame is in excellent condition. Drive train is complete. Fuel system is complete. Body tub is in great shape, it does have some rust in front of the gun turret, but you can see in the pictures it comes with a brand new Beachwood canvas floor pan, not pieces but the entire floor pan. The OEM Ford “F” script military windshield is absolutely pristine. The L-134 gear driven engine comes with the jeep. The free-spinning gear-driven motor has a Ford GPW cylinder head on it and a rebuild tag as shown. All the parts, including a brand new clutch and pressure plate shown go with the Jeep”

1942-gpw-may-tx6 1942-gpw-may-tx7 1942-gpw-may-tx8 1942-gpw-may-tx9

To Top

Year? CJ-2A Florence, Al $4000


It runs. It’s listed as a 1952, but is more likely a 1946 CJ-2A.

“Factory motor runs good. I have the original paperwork where it was bought new. It does not have a lot of rust. It does need a little work.”

year-cj2a-florence-al8 year-cj2a-florence-al9

To Top

Year? FC-170 Raymond, NE $1000

• CATEGORIES: FC150-FC170-M677

There seems to be parts value here.

“Jeep fc-170 for sale , been sitting 10 years or so – No Title $1000 obo located by Raymond Nebraska – can load on your trailer”

year-fc170-r-ne6 year-fc170-r-ne7 year-fc170-r-ne8 year-fc170-r-ne9

To Top

1948 CJ-2A Mt. Holly, NC $2750


Only the one pics provided.

“1948 willys cj2a complete will need rust repair on tub floor frame is good engine not locked up but have not tried to fire this is a project but its all there let me know if you would like to setup a time to see it thank you”


To Top

1959 Wagon Meridian, ID $2000

• CATEGORIES: Willys Wagons

TJ spotted this wagon that may make a good project. Only one pic provided.

“Jeep Willys Wagon 4×4 Project Great metal. Good start for very cool project”


To Top

1947 CJ-2A Fenton, MI $1600


Project or parts.

“This is my fathers project Jeep, it has a f134, t90 and Dana 18. Body is just sitting on frame. Comes with extra parts.”

1947-cj2a-fenton-mi6 1947-cj2a-fenton-mi7 1947-cj2a-fenton-mi8 1947-cj2a-fenton-mi9

To Top

1951 CJ-3A Milwaukie, WI $2500


This has a government plate on the dash.

“I KNOW IT ISN’T a JEEP PATRIOT but FB doesn’t list Willys and you can’t post an add unless you select SOMETHING so… Frame and tub are in pretty good shape. Needs motor. Rolls and steers easily. If you are looking to restore this model or make it an army jeep this is a pretty good platform to start with. Body panels are in good shape and the tub floor needs some work but is fairly solid. Frame underneath looks okay. This was supposed to be a restoration project but I realized I don’t have the knowledge or time so I would like to pass it on to someone else before the snow flies. Sat indoors for many years until about two years ago. Stays covered since. No title.”

1951-cj3a-milwaukee-wi95 1951-cj3a-milwaukee-wi96 1951-cj3a-milwaukee-wi97 1951-cj3a-milwaukee-wi98 1951-cj3a-milwaukee-wi99

To Top

1952 CJ-3A JeepRod Mayfield, KY $2500

• CATEGORIES: CJ-3A, Jeep Rods

Unclear how much value is here.

“1952 jeep willys rat rod jeep. We bought it to finish it and just don’t have the time It has 305 with automatic trans got a 350 to go with it it ran when I parked it. I have the front gril and radiator which I just had worked on”

1952-jeeprod-mayfield-ky1 1952-jeeprod-mayfield-ky2

To Top

1950 CJ-3A & 1947 CJ-2A Hubbard, OR $2750

• CATEGORIES: CJ-2A, CJ-3A, Wood bodies

UPDATE: Still Available.

The CJ-2A’s body is wood from a Sears & Roebuck kit. Seems we have run across one of those kits before.



“Package deal of tona of parts and three Willy’s Jeeps. One ’47 CJ2A (white) complete but half the body is a plywood kit from Sears Roebuck. No title. Engine has lots of rust but repairable with a hot tank and time. Needs work but good frame and lots of good parts, or make it run again if you want.

One ’47 CJ2A just the body have the windshield, fenders, grille, seats, tailgate, and other metal for it.

And one ’50 CJ3A complete with title runs and drives but has bad tires, no brakes, no steering (the front crossmember is busted off, planned to chassis swap with the white 2A.) Grille is unbolted as is left fender to work on car. Has new starter and new ignition parts. Runs like a top stock fuel pump even works.

Planned to use the running gear from green one, body of the tub and parts, and chassis from the white one to make one nice stock jeep easily then use the remaining parts to build the remaining parts into crawlers or something fun.

Parts include:
Engine block in good shape will need cleaned up, cranks, cams, pistons, rods, oil pans, transfer cases, I think transmission, drive shafts, radiator, tons of body metal such as hoods fenders doors windshields (including glass) tailgates, parts to put a canvas top on, basically three entire jeeps worth of parts including lots of new parts worth ~450 from Kaiser Willy’s with receipt.

May split stuff. Yes the VW stuff is for sale too.