To Top

Wrestling with the Mighty BIscuit

• CATEGORIES: Biscuit, Features This site contains affiliate links for which I may be compensated.

During my last visit to my parents’ house, I tried starting Biscuit.  The engine would turn over, but wouldn’t fire.  It didn’t take long for me to figure out that the electric fuel pump no longer worked.  So, I decided on my next visit I’d change from the electric to the stock manual pump.

Today, I took on that project.  While a very simple changeover in theory, the practice turned out to be more of a challenge than I expected.  For example, the first step in the process required me to break into my tool box, as the keys to my tool box disappeared during my move last summer.  After spending an hour searching for the keys, I finally gave up and ‘removed’ the lock’ (with hammer, screw driver, and little finesse).

It was surprisingly easy to remove the lock.  However, it was surprisingly difficult to get the lock portion of the drawers to unlock.  I won’t bore you with the embarrassing details, but let’s just say that it took us about an hour and half to finally get the tool chest unlocked.  Oh, good times!

Next, I had to start pulling off the electrical pump and installing the manual one.  It just seemed like I dropped every socked a hundred times, grabbed the wrong wrench with each reach, had to search through the barn to find rarely used tools I had stowed away, and more.  Nothing seemed to be easy about the project.

Finally, about 5pm, Ann wandered out to see how I was.  I was not good.  The socket has just slide off my socket wrench extension again, which meant I had to climb down onto the tarp, scoot under the jeep, and retrieve it, again.  I shared some choice words about Biscuit with Ann.  She decided to take a picture and post it on Facebook  Here is the picture and what she wrote:

Today, under a cloud of tools, grease, and a broken fuel pump came the flood of curse words and the exclamation from Mr eWillys.com himself…. David Eilers “hates Jeeps” 🙁

It took me until about 7pm, but I did finally get the fuel pump installed and the hoses attached.  Even better, everything worked.  So, now Biscuit and I are all lovely dovey again.

So, I’m done with jeeps for today.  Updates tomorrow.

 

 
To Top

The Earth Moved Under Paul’s Feet

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

Paul sent this to my inbox today. A couple days ago he removed his stainless steel body from his frame so he can complete the work on his frame.  It’s a good thing he listened to his intuition!

“I spent a few hours yesterday in the connex cleaning up my mess and double checking the security of the Willys body resting on the 2X4 support framework.  For the most part I felt the body was safely held three feet above the floor but my mind kept coming back to the thought “Would it stay in position during an earthquake?”  Since it’s much faster and easier to add additional support structure than it is to repair damaged stainless body panels I fitted eight more bracing legs to the existing body holder.  I really didn’t think any additional strength was necessary but I’d sleep easier with this bit of overkill engineering and the cost in time and money was negligible.  

While taking a shower this morning I was surprised when the house started rocking back and forth as several sharp jolts announced the arrival of an earthquake.  The quake was a small one, only about 4.6 but it was close to Anchorage (about ten miles away) and it was over quickly.  After getting dressed I hurried to the connex, opened the door and viewed a beautiful sight. The Willys body was safely resting on the framework undamaged and perfectly aligned on the supports.  

I realize rebuilding Jeeps can be an experience in frustration when money and time conflict with dreams but I really could do without adding earthquakes into the mix.  I’m slow enough as it is, I don’t need Mother Nature increasing my heart rate with exciting special effects.  On the other hand I’m happy the Willys is safe, the body support held and I don’t have to repair any damaged body panels.  Now all I have to do is to hurry to get the frame work accomplished and reattach the body to the chassis before anymore earthquakes visit my workspace.”

 
To Top

Layton’s Family Restaurant with a Willys Wagon Sign

• CATEGORIES: Advertising & Brochures, Artists/Drawings, Features This site contains affiliate links for which I may be compensated.

Gerald forwarded pictures of this sign (thanks!).  While the Willys Wagon is featured prominently on this sign, I couldn’t find any evidence of its existence elsewhere within the restaurant.  Layton’s is located in Ocean City, Md, and is supposed to be pretty good according to Urbanspoon.

 
To Top

The 3rd Annual Willys Overland Rally: May 18-20, 2012

• CATEGORIES: Event, Features This site contains affiliate links for which I may be compensated.

UPDATE:  JUST A REMINDER

Sign up now for the Moab Overland Rally, a tribute to Willys Wagon and Trucks.  Click on the picture to connect to the website, http://www.willysrally.com/

 
To Top

CJ-3A spotted in The Dalles

• CATEGORIES: CJ-3A, Features This site contains affiliate links for which I may be compensated.

On our way home from the WAAAM on Saturday we decided to drive through The Dalles, a small town whose name isn’t pronounced like ‘Dallas’ but rather like ‘The Dallzzzz”.  While driving through I took an unplanned turn, then crossed over to a side street where I spotted this CJ-3A (which of course required a few pictures).

 
To Top

Year? MB & Wagon Rising Fawn, Ga Each **SOLD**

• CATEGORIES: MB, Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200/each.

It’s a little rough, but plenty of parts there.  I can’t tell much about the Wagon.

“I have an antique Willis Sedan and a Willis WWII Jeep. Both were my dads but have been sitting for a long time, both have some parts missing. I would love to fix them both up but I dont have the time two. Im not sure what theyre worth but I know they are both rare so im thinking $1200 or the best offer. You would have to find a way to move them and I can help.”

 
To Top

Year? GPW? Iona, Id $1500

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

No pics.  Unclear just what this is.

“This is an old cj2a the model is actually a ford. All parts the same as jeep”

http://eastidaho.craigslist.org/cto/3016910900.html

 
To Top

1947 CJ-2A Williamsburg, KY **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000

It looks pretty solid.

“I have a 1947 willys its n great shape for its age it does run and drive all the factory gauges work nothing has been updated its all original. I don’t have the money or time to restore. Hoping to give it a good home”

 
To Top

1946 CJ-2A Mesa, AZ **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $3000

Not running.

“Complete truck, not running needs carburetor rebuilt. Couple extra parts. No rust, very nice body. Back bench seat is a little rough, but other than that its in great shape! ”

 

 
To Top

Willys Pedal Car Janesville, Wi **SOLD**

• CATEGORIES: toys This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD* Was $200.

Not much pedal car left.

“1950s Hamilton Army Willys jeep Pedal Car $200 obo”

 
To Top

1946 CJ-2A Portland, Or $1000

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

There looks like value here.  That appears to be a Bobcat Fiberglass Body.

“1946 Willys Jeep project
Everything is there it just needs to be put together and some TLC
I have a canvas top, front folding tow bar, rear tow hitch, and roll bar
4.3L V6 engine from a Chevy S10
Fiberglass tub”

http://portland.craigslist.org/mlt/cto/3017248110.html

 
To Top

1947 CJ-2A Shickshinny, Pa $400

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

Between the top and a few other parts there is some value.

“I have a 1947 CJ2A Willys jeep for sale. There is no motor and the body needs work. This would be a great restoration project for any Jeep enthusiast or just for parts. $400 or best offer. Call/text 57o-38o-4493 if you are interested or have any questions. Ask for Mike”

http://scranton.craigslist.org/cto/3017488480.html

 
To Top

1949 CJ-3A Newport, Mn $4000

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

This looks good.

“49 willys cj3a 4 cylinder “go devil” 3 spd. 12 volt gear reduction starter. could use new tires.stored inside for past 30 years. pretty good shape. turns alot of heads. kids love it! drives and runs well.”

http://minneapolis.craigslist.org/wsh/cto/3017660380.html

 
To Top

1958 Truck Isanti, Mn **Status Unknown**

• CATEGORIES: Willys Trucks • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **Status Unknown** Was $1300.

(11/30/2012) This runs and drives and looks good for $1300.  The bumper is a bit over the top though.

“1958 Jeep Willys Truck 4 Wheel Drive. Runs and Drives. Eng 226/6 cyl. plow attachment/no plow. Cab corners and floor boards rusty. Engine, transmission, drive train all solid. Plow attachment was on when purchased, no idea what type of plow fits on it.”

 
To Top

1946? CJ-2A Jefferson City, MO **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $950.

There might be value here.

“1946? WILLYS JEEP 4X4 HAS CHEVY V-6 ENGINE. THIS IS A PROJECT WITH NO TITLE. IT NEEDS A LOT OF WORK TO BE ROAD WORTHY. RUST IS NOT BAD FOR A MISSOURI VEHICLE OF THIS AGE. DOES NOT RUN BUT WILL TURN OVER AND FLUIDS LOOK GOOD. WOULD BE A GREAT HUNTING VEHICLE OR OFF ROAD TOY. ALSO HAVE AN ORIGINAL JEEP ENGINE AND ENGINE ACCESSORIES FOR SALE.”

 
To Top

1957 Truck Fernandina Beach, Fl **SOLD**

• CATEGORIES: Willys Trucks • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was 23,999.

This was a garaged truck, but the frame was rebuilt?  Looks like a fine truck, but I don’t see an argument for the high price.

“-3800 miles
-Original Flat head engine
-3peed drivetrain with low high 4×4 plus overdrive
-Original mufflem shocks
-Rebuilt frame
-Pleated interoir with installed radio
-Stanless steel bed and toolbox
-New Mickey Thompson Tires
-New paint job to compliment the old truck”

 
To Top

1946 CJ-2A Plainville, CT **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $8000

(03/13/2012) This looks very nice, solid jeep.  Lots of pictures.

“I have for sale a 1946 Jeep Willys CJ2A. Excellent condition and owned for 5 years. It is the original color, Luzon Red, has black vinyl seats, and white “best” top. It has a correctly detailed engine compartment and a custom built heater. Stored indoors, driven daily on nice days. Great summer fun Jeep.

New parts include:
– New Body
– 3 speed Transmission
– Radiator
– Complete Brakes system (from master cylinder to drums)
– rebuilt steering box”

 
To Top

1946 CJ-2A Redwood City, CA *SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $3500.

(09/30/2011) This has been modified slightly at the point where the bottom of the dash meets the entry point. It should slope rather than angle.

“Willies CJ2A 4X4 with original four cylinder flat head, three speed transfer case.
Locking hubs
New steering box located under front bumper
12 volt electrical system
New brakes, cylinders,& brake pads, changed from 9″ pads to 11″ pads.
New clutch
Roll bar
Two 5gal. gas tank racks
Tow bar
Jeep has been on private property for the last forty years and runs great. Replaced for a newer larger Jeep.”

 
To Top

1977 CJ-7 Towson, Md $9000

• CATEGORIES: CJ-7 • TAGS: , This site contains affiliate links for which I may be compensated.

HOG forwarded this nicely rebuilt CJ-7.

“Complete fiberglass body (minus original front grill)
4″ BDS Suspension Lift
33×12.50 BFG clone AT’s
Rebuilt 401 AMC V8
Brand new Best Top soft top and soft doors
Best Top front and rear seats
Bikini top
Custom front bumper
and some other items…

I do not need to sell this, but really only entertaining trades and full price offers. I am only interested in trading for 98+ Wranglers (preferably lifted/modded).”

http://baltimore.craigslist.org/cto/2971862282.html

 
To Top

1946 CJ-2A Texas $2500 w/ Trailer

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(05/10/2012) I haven’t seen a hood painted quite like that one.  I’ll bet this was a nice jeep at one time.  It looks like the seat covers matched the dark accent color, too.

“This was a go getter at one time- This is a good example of what happens to vehicles that are left unused for years- This is a 1946 Willys jeep that has not run for about 12 years- It comes with a M-416 2 wheel Military Trailer that still has all the Military hardware- The trailer is in good condition wih some rust out and some damage to front sheet metal- The Jeep has all the usual rust out places-The gas tank is no good-Has good back seat frame and passenger seat frame,drivers seat frame is pretty rusty-Floor boards are rusty- Has a tow bar,but you will need a trailer to haul it home- Frame is still solid with no rusted out places-Transmission and transfer case shift easily- Motor will need some work,but looks to be complete-Has been converted to 12 volts-Oil canister is missing-Radiator holds water- Down side ot motor someone tried to remove plugs and broke them off in head-Tires are dry rotted- Has whats left of a Canvas top and door frames, has all the top bows and mounting hardware for top-There are lots of good parts or you could get it running with a little work- SOLD AS IS – I do have a good Texas title for the Jeep”

http://dallas.craigslist.org/mdf/cto/3016912009.html

 
To Top

1949 CJ-3A Everett, Wa $5990

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $5990

(05/24/2010) This appears in good shape.  I suspect the body is a repro body.

“I am selling my 1949 CJ3A. It has a Buick 231 V-6, Warren overdrive, rebuilt T-18 transmission, NDT tires, power steering, and 11” brakes. It has a military grade canvas top (as shown; no full top).

Items that have been replaced within the last few years:
Brakes (including shoes hardware and wheel cylinders)
E-brake handle and cables
Clutch
Water pump
Steering column
Shocks
Flywheel
Bikini top
Motor mounts
Battery
Electronic ignition/ distributor
Most of the wiring and lights
Fuel pump
Fuel tank (RCI racing cell)
Tires (5 NDT military)
Carb (2bbl)
Hoses
Horn
Timing chain set
Additionally, it has new custom exhaust (really nice not some hack job).I have a lot of fun with this Willy’s and it runs/ drives well. For those not familiar with these old jeeps, they are very capable on the trail and are great to run around town. They are not equipped to drive on the freeway as they are geared very low (5:38 pinion gears).Like most vehicles of this age, it is not perfect. It has minor oil leaks and is one of my ongoing projects.

Thanks for looking.”

http://seattle.craigslist.org/sno/cto/3017627702.html

 
To Top

1942 GPW Inland Empire, Ca $3800

• CATEGORIES: GPW (Ford MB) • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available. Pics now provided.

(12/29/2011) “1942 FORD GPW JEEP stock 4 cyl. motor rebuilt with T-90 trans upgread new 32 inch BFG mud tires new seats rhion lined floor and new top $3800 OBO (909) 322-1937”

http://inlandempire.craigslist.org/cto/3017036046.html

 
To Top

1953 CJ-3A San Diego, Ca $1950

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(12/10/2011) It doesn’t run.

“1953 Willys Jeep – Perfect for a Rock Crawler project!!
Motor is incomplete, but was converted to a V6.
Basically a complete rolling chassis.

We have what you need!! Give us a call or stop by and speak with our Jeep Specialities!!Se habla espanol!

Hard Rock 4×4
920 Heritage Rd.
San Diego, CA 92154

619-661-8242
http://www.jeep911.com

http://sandiego.craigslist.org/csd/pts/3017756883.html

 
To Top

Modified Flatfender Palmyra, IN **SOLD**

• CATEGORIES: CJ-2A, Features, Unusual This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

This probably seemed like a good idea at the time ….

” For auction is my 1946 Willys CJ2A “modified”. This vehicle sits upon a cut down 1973 K-5 Chevrolet chassis. It has a cast iron 4 speed manual transmission and cast iron gear driven transfer case! Rear differential is 12 bolt limited slip and front is 10 bolt with manual lock outs. Disc brakes up front and drums in the rear. There is currently no engine!! It was last fitted with a 250 cid GM inline six. Just about anything with a Chevrolet bolt pattern can be made to fit! The top was custom fabricated and appears to be aluminum. The body has, what I would consider, a lot of rust, but is all there and still has many usable parts. Everything about the driveline worked fine when the engine was pulled in 2009. It has been sitting ever since (except to be towed).”

 
To Top

Window Defroster

• CATEGORIES: GPW (Ford MB), MB, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

stin forwarded this unusual item.   Some defrosting units were used during WWII, though those were 12 volt.  They vary in price from $35 to over $100 depending on condition and completeness.

“Defroster kit that attaches to windshield and has a switch that mounts under dash and a fuse protector. 12-Volt.
Made by Durkee-Atwood Co.
It comes in the original green metal box
Also have an extra defroster switch and the original green metal box”