To Top

1948 Truck Colorado Springs, Co $3000

• CATEGORIES: Willys Trucks • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  price dropped to $3000

(03/30/2012) This appears in good shape.  The upholstery looks nice.

“48 Willys Overland Pickup.New upholstery, 12 volt, rewired, new front springs, new fuel tank, new front tires, new gauges many others but not a complete restoration. Everything runs, engine, 4×4, heater etc. New Battery. Asking $3000”

http://cosprings.craigslist.org/cto/2991033258.html

 
To Top

1951 CJ-3A Escondido, Ca $3500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $3500

(07/24/2012) This has some good upgrades.

“This jeep goes anywhere. It runs perfect. Has 4.9 liter or 300ci ford inline 6. Bullet proof motor. Has cj7 chasi. Dana 30 in front axle and dana 44 in rear.4.10 gears.has grany low wich u can basically walk beside which is ideal for crawling. Tires in good condition. Has black rims with simulated bead lock. Has an original 6klb warn winch on front. Txt me for mor info at 7605048592 thnks ”

http://sandiego.craigslist.org/nsd/cto/3026201941.html

 
To Top

1948 CJ-2A Santa Clarita, Ca **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $3800

“This jeep has been used on a few TV shows…it looks like an army jeep but it is post war. it passes for a world war jeep with the exception of a few minor details, but if your looking for a rough tough great running toy this is it…has two tanks for long off road excursions that have just been flushed and acid washed and the Carb was just rebuilt so this thing starts every time and wont stop going…I have a roll bar if you wont to run one, it has a tow bar great behind an RV and a bikini top as well. The Jeep has a Ammo Can for a glove box and an extra Jerry Can for gas”

 
To Top

1945 GPW Santa Cruz, Ca $1200

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(02/18/2012) Needs Engine, but some value here.

“1945 GPW Jeep. Many good parts. Doesn’t run – needs engine. $1,200 Don 831 684-0489”

http://sfbay.craigslist.org/scz/cto/3025606647.html

 
To Top

1947 CJ-2A Hesperia, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000

(01/01/2012) The front frames horns might be in pretty good shape.  The rest looks rough.The windshield looks mb/gpwish.

“jeep is ready for restoration, 4cyl flat head, all parts are there, exept radiator.”

 
To Top

2012 Spring Midwest Willys Reunion

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Bob uploaded pictures from day 1 of the 2012 Spring Midwest Willys Reunion.  It looks like the weather was beautiful.  Bob said he’d try to upload more pictures tomorrow.

 
To Top

Fiberglass CJ-3B Body & Hood & Fenders Battle Ground, WA **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

This rare package also includes a CJ-3B shell.  This is all bobcat parts.

“Too many projects and not enough space or time to do them all. I have a Jeep body, tub, front fenders, and hood – all made of fiberglass and a steel grill. $1500 for the whole package.”

 
To Top

1949 Jeepster Edina, Mn $11,500

• CATEGORIES: Jeepster • TAGS: This site contains affiliate links for which I may be compensated.

The two large pictures suggest this is nice.

“’49 JEEPSTER CONVERTIBLE YELLOW BODY, BLACK TOP WITH RED INTERIORS. BUICK V6, BUICK AUTOMATIC TRANSMISSION. CALL: 612 751 7644”

http://minneapolis.craigslist.org/hnp/cto/3023836439.html

 
To Top

1951 CJ-3A Benton, Ks eBay

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

No engine.

“Had an original flat 4cyl in it, is now ready to bolt up a small block chevy motor.  Adaptor and bell housing come with the jeep.  I have spent some time and money building to drive around town but getting married and the wife says it has to go.  Does have Chevy disk brake conversion on the front axle with steel braided hoses.  Installed WARN overdrive for more ability to drive around.  Have redone fuel system with a custom fuel cell, liner in the back of the jeep along with new steel braided lines.  Interior has new Best Top seats along with seat belts that have been added, does have GRANT removable steering wheel. Has newer Best Top soft top and soft doors.  Exterior does have newer paint but has been subject to minor weather conditions so paint has a couple blemishes, hood has been modified for pro-scoop as pictured and is included with this auction.  Has newer exhaust with flamethrowers built into the custom side exit exhaust. Do have corresponding paperwork for after market components added to vehicle.  All paperwork goes with the vehicle.

Am listing this for my son, please feel free to ask any questions you may have before bidding.  I will get the answers to you as soon as possible.  You may also text or call 316-650-2470 if you would prefer.”

View all the pics on eBay

 
To Top

1958 CJ-3B Melrose, Fl **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Was $7500. **SOLD**

“Here is the backstory on this Willys as I understand it. I am the third owner. The original owner bought the vehicle as a farm Jeep for use in mid-Georgia. The vehicle was never titled for road use. It spent it’s working career as a chore vehicle, never leaving the farm. The second owner bought it some 15 years ago intending to restore it to original, but fell ill and never moved forward on the project. It spent it’s entire time with him in the garage. He titled it in Florida just before he sold it. I bought it in October of 2011 as a project Jeep, something to bring back to life and eventually restore.

Because of it’s origins it has less than 18,000 miles on the odometer. Engine, drive train and frame condition back this up. Compression is in the sweet spot, no rust or frame damage and it shifts and drives great considering it is a 56 year old vehicle. I have spent the past six months and $ 4K in parts getting it back into roadworthy condition. Here’s a partial list:

* All fluids, hoses etc. changed, some fluids twice. New oil pressure switch.
* Electrical: New wires, plugs, points, condenser, flasher, bulbs, wiring issues traced down and fixed, new regulator, new headlight switch. New battery cables. New coil. New generator mounting bushings. New horn button. New battery hold-down. New battery. New speedo cable.
* New heater hoses and radiator, new temp sender, new radiator cap.
* Brakes: New shoes all the way around including e-brake, new wheel cylinders. New brake light switch (twice now). Drums turned.
* Drive Train: New front pinion seal, new u-joints (all four). Front knuckles disassembled, cleaned, new kingpin bearings, new front left axle and all new gaskets. Tie rods pulled, cleaned and new boots. Drag link pulled and rebuilt. Bell crank pulled and rebuilt.
* Fuel: New fuel gauge sending unit. Carb kit and rebuild.
* Engine: New valve gaskets. New oil pressure switch. New oil filter and filter hose. New fan belt.
* Tires: Five new tires, one new rim and one new spare tire mount. Military style NDCC’s, original for that year.
* Body: New windshield, gasket and windshield frame to hood gasket.
* Wiper motor (original) pulled, disassembled, cleaned and painted. Still doesn’t work quite right though. Needs a rebuild kit (hard to find). New wiper blades and arms.
* Cosmetic: New hood blocks and tie-down. Sandblasted windshield frame, POR-50 then semi-gloss black which was original for the windshield. Sandblasted rims, primed and painted a matching white to original. Added lap seat belts.

What’s left mechanically? Speedo has quit working. Needs to be pulled and repaired. There’s a leak at the bottom of the water pump. I haven’t diagnosed it yet, hopefully just a gasket, but even if not it is a simple project to replace the pump. Very slight oil leak at the pan. I pulled the pan and cleaned and haven’t been able to get rid of the leak. Could use new springs and shocks. They look to be original. Springs are pretty flattened out. Shocks actually seem okay. Passengers seat pad is pretty well shot so a repair or new seats are in order. Idle knob is intact but the linkage at the carb is missing. On startup and occassionally after a long idle it blows a little blue smoke. I believe this is due to leak-by on the valve seals, not rings. Compression is too good. No top or doors. Also occasionally the gas pedal linkage gets stuck somewhere and it locks at a high rpm. Happens when I shift hard. The linkage is catching on something somewhere and I haven’t been able to figure it out. I just kick it down with the gas pedal, but it needs to be found and corrected.

It has the PTO shifter which does work, but no PTO shaft.

Things I’ve noticed: First, if you know these vehicles you will immediately see that the front and rear bumpers are not original. Both have been adapted for farm use. They are no doubt stronger than original, but if you intend to restore this to factory then you’ll have to cut them off and find old ones. Not hard, readily available. There’s a little backfire downshifting. Timing, I imagine.

The body, or parts of it is not original. A new floorboard is welded in and the side panels are not quite right. Seem to be new ones over the old ones. I can’t really tell. They are bolted on at the rear wheel wells, a dead giveaway. Taillights are not original. There is no tool box under the passengers seat, and I suspect the mounts for the seats have been modified to fit the new floor pan. The frame and floor inside have been undercoated and both are holding up well. I still need to align the front wheels. Also, I was not able to get the rear hubs off so I just greased them. They seem fine.

No lowballers please. Also, I am not interested in selling to someone who wants to jack it up and turn it into a mud truck or rock crawler. This vehicle is very close to pristine. For someone interested in a frame off, the majority of expense is out of the way. The rest is just labor and paint. With a little more work it will be a fine show car. Now that I have it back on the road I use it to run errands, etc. I look for excused to drive it. It’s amazing how much attention it gets. I don’t need to sell it, but other than the pleasure of driving it I just don’t really have a pressing need to keep it, so it would be nice for it to find a new home with someone who will continue the restoration. E-mail me with questions. I can supply additional photos.”

 
To Top

1942 GPW Alabama $17,000

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

This looks solid.

1942 Ford Jeep, nearly complete restoration – only lacks markings. All original, numbers match. Very little corrosion. New battery, just rebuilt carburetor and generator. Runs great! Location: South Alabama

Price: Asking $17,000 but make us an offer as the boss wants it gone.

Please contact Bob at: Phone: (251) 238-3067″

http://www.warjeeps.com/bd/sale/adwb191/adwb191.html

 
To Top

1958 FC-150 Stanfield, Or $800

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

There appears to be value here.

“Rare Jeep Forward Control (FC-150) pickup. This was someones project in the late 70’s that never got finished. Has the original frame, willys wagon axles, Ford inline 6 (believe it to be 170). The interior is gutted and there is no steering column or gauges. Bed would have to be modified around the fenders to fit because of the wider willys axles.

Previous owner had the truck since 1973. Clear title.  541-701-1781”

http://portland.craigslist.org/grg/cto/3024117348.html

 
To Top

L-134 Motor Orrville, Oh $250

• CATEGORIES: Engine This site contains affiliate links for which I may be compensated.

It is supposed to run.

“I have a Willys L134 Flathead motor that I pulled from a 1947 CJ2A.
The motor is complete from carb to pan and from fan to flywheel.
Motor is free and crank turns easily.
Do not know if it will run, selling as is for parts or repair.
Can load into your truck with my tractor.
Located in Orrville. Ohio 44667
Motor only as shown in the photos as Jeep is already sold.
Call anytime from 9AM to 9PM ask for Bob
330-208-6163”

http://akroncanton.craigslist.org/pts/3024320430.html

 
To Top

F-134 Motor Parks, Az $400

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Unclear if this was rebuilt.  It looks like it was cleaned and then sprayed.

“134 F head complete engine. Includes carburetor, generator. Runs good. See pics”

http://flagstaff.craigslist.org/pts/3022751581.html

 
To Top

1955 CJ-5 California $5500

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

Mark has this over at sellajeep.com.

“4 cylinder, 3 speed transmission, 4×4, yellow paint, many non-factory add-ons. Must see to appreciate! Price: $5,500 Please contact Juan at: Phone: (951) 672-3431 or email: batwin77@live.com

http://www.sellajeep.com/bd/sale/adsb194/adsb194.html

 
To Top

1946 CJ-2A Waxahachie, Tx **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3000

(05/15/2012) 1946 Willys CJ2A. Runs/Drives. Needs brake work and I have a new rebuilt starter ready for install. Smooth primer body with some rust on undercarraige. Texas title in hand and registered as an “antique vehicle” so no State inspection required!”

 
To Top

1946 CJ-2A Burbank, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1350

(07/06/2010) It might be worth a closer look if you are near Burbank.

“I have had this Willys Jeep since 1998. Drove it home and it got disassembled. It’s been a project ever since.  THIS IS A PROJECT

I would strongly discourage the average person; you need to be mechanically inclined to have fun with it.  *** I have a trailer and can provide delivery *** ”

 
To Top

1946 CJ-2A Placerville, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1900.

(05/08/2012) It doesn’t run.  The top is not included.

“Willys 1946 CJ2A Very solid Jeep, body and floors in very good condition, this is not a beat up rust bucket. This Jeep was parked inside a hanger and used at a private airstrip in Calpine CA, where it has been for 51 years. Front end has been rebuilt, new Warn hubs and aftermarket bell crank. At some point it had a V-6 Buick 225 engine installed, the rest of the Jeep is all stock. The Jeep has not run for about 12 years but was running when parked. Tires are still in great shape. Have original CA pink slip. Jeep has original black and yellow plates. Nice Jeep to restore for the price. With a new battery and a few hours of work you could have it back on the road.”

 
To Top

1948 CJ-2A Kennewick, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1800.

“48 Willys, Body Excellent, Buick V-6 replaced original Engine in the late 60’s. Chev steering with frame horn mods. Otherwise it’s all original Jeep/Willys. No seats. I have 1 original wheel and extra (or original) front axle. Bring you own wheels and tires. Make Offer.”

 
To Top

Newhouse Hi-Performance Equipment from 1952

• CATEGORIES: Engine, Features, Racing This site contains affiliate links for which I may be compensated.

Glenn forwarded a couple pages of this old catalog for hi-performance parts that included a few for the jeep.  He sent these to me after a short discussion with Scott, who races using F-head and L-head motors (more on that to come).

According to Scott, “I have bored them up to .092 oversized and I have had about 6 different cams made by crane cams.  The motor I have had the best luck with so far is .060 over with dome style pistons.  It has 1.7 ratio roller rockers.  It is a F head. I cut the side of the head open and welded the water jackets and built an intake manifold that is 8″ high.  With a 500 cfm holley ive been able to get 7000 rpm out of it.”

Scott’s experimentation has been done simultaneous to Sam at Flatfender Willys, who experimented, just for fun, with hi-po parts in a flat head with modern honda fuel injection. Sam did a few other things to the engine, but I don’t precisely remember what.  Sam and a friend drove the motor hard, before it finally gave out, though a couple transfer cases and a drive line gave out before the motor did.

Here are the two pages from Glenn.

 
To Top

Abbreviations 101 – Willys Horn Ass.

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

Robin shared this humorous advertisement.  The seller either carefully, or not, decided on a peculiar abbreviation for the word ‘assembly’.

You can read the original ad here:  http://willysforsale.com/ads/willys-horn-ass/

Here is a snapshot of it.

 
To Top

CJ-3B – Mahindra in India

• CATEGORIES: CJ-3B, Features This site contains affiliate links for which I may be compensated.

Buz spotted this Mahindra at the team-bhp website.

He notes, “The post below this one mentions “One will find hoards of such jeep rotting” in India. I guess they aren’t going to the scrap mill like over here.”

http://www.team-bhp.com/forum/vintage-cars-classics-india/15813-rust-pieces-pics-disintegrating-classic-vintage-cars-269.html

 
To Top

1946 CJ-2A Hager City, Mn $1200

• CATEGORIES: CJ-2A, Last Ride This site contains affiliate links for which I may be compensated.

The front cowl is so crushed that at first I thought I was looking at a Bantam prototype.  You can see the cowl damage in the last pic.

“For Sale 1946 Willys Jeep Rolling Chassis with Transmission and Transfer case.
Also included is steering wheel with steering gear.
Bumper also included.
Also comes with original body tub with front fenders.
Body tub is in poor condition, but tail gate is good and fenders are salvageable.
Also comes with original hood.”

http://www.ewillys.com/wp-admin/post-new.php

 
To Top

1947 Wagon Reidsville, NC **SOLD**

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $8000

This runs and drives, but still needs some work.

“I have a 1947 willys unfinished project, runs and drives. I have a good title. It has CJ-5 running gear, 304 amc V-8. low range kit in the transfer case. 456 gears front and back. rear lock right, limited slip in front, t18 four speed, 33 in mud grappler tires, body is in good condition, interior work needs to be finished, front wench will not be sold with it. Its a project, its drivable but not complete. The reason im selling is because i have to many projects going on.”

 
To Top

1952 Truck Boyne City, Mi **SOLD**

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4800

This lokos in good shape.

“This truck runs great and is ready for mud or sunday driving. No time to play with it anymore. needs a new garage. its lifted and has oversized tires”