To Top

1946 CJ-2A San Diego, Ca $5000

• CATEGORIES: CJ-2A

1946_cj2a_sandiego5Nothing fancy, but sounds like a good, strong drive train.

“46 Willys Jeep Project, 4.3 vortex v-6 motor, sm465 trans, t18 transfercase, ford 9″ rear end, dana 30 front end. Serious offers only please call 619-933-6707 NO TRADES, More pics on request ”

http://sandiego.craigslist.org/esd/cto/1302088646.html

 
To Top

Year? CJ-2A/DJ-3A Salisbury, NC **SOLD**

• CATEGORIES: DJ-3A

year_flattie_partsjeep_salisburyUPDATE: Was $500. **SOLD**

I think this needs a little work.  DJ-3A?

“40’s model dj-2a flatfender willys jeep. complete body (tub is pretty rusty but fenders and grill are in pretty good shape). flathead 4cyl engine (disassembled but complete, comes with new clutch and pressure plate). frame and axles all still together.”

 
To Top

1947 CJ-2A Bloomington, Mn $6900

• CATEGORIES: CJ-2A

1947_cj2a_bloomingtonIt sure looks like this jeep has been well maintained by the same family for over 50 years.

“This jeep has been the family for over 50 years. The original 4 cylinder engine has 47,000 miles on it and runs great. It has the standard 3 speed manual transmission, transfer case with high and low range, 4 wheel drive, and lock out hubs. The soft top and tires are new. The 6 foot plow and a full size cover are included with the jeep. It has the original 6 volt system including lights, gauges, generator, and battery. I also added a 12 volt battery connected directly to the starter for easy starting even on the coldest winter days. This jeep has been well cared for and maintained over the years.”

http://minneapolis.craigslist.org/cto/1301877731.html

 
To Top

1946 CJ-2A Decatur, IN **SOLD**

• CATEGORIES: CJ-2A

1946_cj2a_decaturUPDATE:  **SOLD** Was $1000

Well, at least it runs …

“1946 Willys Jeep, Flathead Head 4 cyl engine, manual trans, full time front 4wd axle, the engine runs but needs overhauled. The brakes need work. The body is rusted but the frame is in good shape. It has been converted to 12 volts. Also includes an extra set of original style tires.”

 

 
To Top

Year? CJ-3B Delaware $3800

• CATEGORIES: CJ-3B

year_cj3b_delawareThis jeep has a warn overdrive as well.

“Up for sale is my CJ3B I picked up as a restore project. Runs great, only reason for selling is i’m looking for a jeep with a little newer features/more power. Completely redone brake system, new drums, cylinders, shoes, some lines, hoses, master cylinder. Hi performance intake filter recently put in. New optima battery w/ basically comepletely redone wiring and cables. Working horn. Working Wipers. Custom soft top, 265 tires (about 31’s). Jeep also has bedliner sprayed in to help water seal, as well as new racing seats and harnesses. New gas tank, full roll cage. Just went through Delaware inspection , good for 2 years….”

http://delaware.craigslist.org/cto/1304419880.html

 
To Top

1946 CJ-2A Wikieup, AZ **SOLD**

• CATEGORIES: CJ-2A

1946_cj2a_wikieupUPDATE: **SOLD** Was $5000

“rebuilt 231 v-6. 331 gears, front disk brakes, new paint and interior, new glass, runs and looks great. 4 wheel drive works good.”

 

 
To Top

1950 CJ-3A Crawler Idaho Falls, Id $17500

• CATEGORIES: CJ-3A

1950_cj3a_idahofallsSomeone put a lot of money, thought and work into this crawler.  The frame pic is worth reviewing.

“freshly rebuilt; custom frame and link suspensions front and rear, with fox air shocks and air bumps on all four corners; engine: chevy 4.3L rebuilt, bored .040 over, roller cam, lifters, and rockers; tranny: hydromatic 700r4 with jb conversions short shaft and adaptor; t’case: stak 4×4 3 speed mini monster box, with 5.11:1, 2.97:1 and 1:1 gearing …”

http://eastidaho.craigslist.org/cto/1304237149.html

 
To Top

1946 CJ-2A Brainerd Lakes, MN **SOLD**

• CATEGORIES: CJ-2A

1946_cj2a_brainerdUPDATE: **SOLD** Was $3600.

This looks like it has a nice, vintage top.  The rest of the jeep looks in good shape, too.

“1946 Jeep Willys. Small block V8. New muffler, alternator, wiring, lift – all professionally done.
Newer tires. Ultimate hunting vehicle.”

 
To Top

1946 CJ-2A Urbana, IL eBay

• CATEGORIES: CJ-2A

I doubt it will fetch the ‘buy it now price’ of $5400.  And, it has plenty of rust and dents that will require some work to remove, however there’s a lot to like about it.  Lots of pics on eBay.

“The current owner has owned this jeep for 25 years and it has 61,504 original miles. Fifteen years ago, the owner and his late wife took a road trip from Urbana, Illinois down to Cairo, Illinois and back up through Kentucky and Ohio. It ran perfectly the whole way. When the jeep was purchased in 1984 the title was in both the owner and his wife’s name and was re-issued in 1998 in his name only after his wife passed away…”

View all the pics on eBay

1946_cj2a_urbana

 
To Top

1946 CJ-2A Washougal, Wa $3800

• CATEGORIES: CJ-2A

No pics yet provided.

“Clean and mostly stock, engine overhauled, 12 volt, well worth looking at please E-mail for more info. Can get pictures in the next few days”

http://portland.craigslist.org/clk/cto/1303125778.html

 
To Top

1953 CJ-3B Okanogan, Wa $12500

• CATEGORIES: CJ-3B

UPDATE:  Price dropped to $12,500.  It’s been for sale for a year.

“1953 Willys Jeep CJ-3B, Buick 225 V-6 T-98 4 speed. Warren Overdrive. Power steering, power lock front and rear differential. Full roll cage, K-Line Top, swingout spare tire rack with gas cans. 8.5 alum wheels with 10.50×15 all terrain. Dana 44 full floater rear. Less than 3000 miles on total frame up restoration. Too much to list. Call 509-826-3676. No disappointments!! ”

http://wenatchee.craigslist.org/cto/1302443837.html

 
To Top

1945 MB Ferrisburgh, Vt $1200

• CATEGORIES: MB

UPDATE:  The price has dropped to $1200.

This is a dissembled project with a rough body that needs to go asap.

“1945 Willys MB, has been sitting in the garage for about 8years. I have take the gas tank, seats (not original) and wiring out. Does not run, but did. Body is shot, frame and running gear are in great shape. $1200 firm. You must trailer away. ”

http://burlington.en.craigslist.org/cto/1301503299.html

 
To Top

My Rebuild: Creating the Transmission Cover

• CATEGORIES: Biscuit, Features

Another of the projects I was putting off was the creation of a transmission cover. It’s really nice to be crossing these small projects off the project list. It’s not a thing of beauty, but it will do for now.

It turns out that the bad hood I had from one of the jeeps I purchased has been a great source of foldable, flat steel. So, I used a chunk of it to fold together a cover.

Before doing any cutting, I used some cardboard pieces to create a mockup. Here’s a look at most of the pieces in place (I actually had more, but removed them, then realized I hadn’t taken a pic, so I threw a few of them back on ..)

tranny_cover_mockup

Here’s a pic of the flat steel from the hood:

tranny_cover_beginning

Next, I drew some basic lines that I used as an outline for cutting and bending the piece. Then, I used a cutting wheel to create a rough cutout of what I wanted. Boy I wish I had had a cutting wheel for my first jeep! That little 4.5″ cutting wheel has been invaluable.

Once I did a rough cut, I made an initial bend (note the clean working space .. lol):

tranny_cover_cutting

Because of the odd and curved shapes, I cut a little, tested it, cut a little and tested it again. Once I was convinced it would work, I sanded it down and made some additional folds:

tranny_cover_bending

After testing it some more, I made the last fold and riveted it in place.

tranny_cover_almostdone

With it finished, I drilled the holes necessary to mount the rubber boot on top and to attach the cover to the body.

All that was left to do was to paint the piece with Herculiner to match the body floor. By this morning the paint was dry, so I installed the cover:

tranny_cover_final

And, from the other side:

tranny_final_cover2

Once I grab a rubber dual boot for the transfer case shifter (if any one has one of these, I’m open to a trade or cash!),  I’ll create a small piece to complete the cover.

 
To Top

My Build: Headlight Rebuild

• CATEGORIES: Biscuit

One of the projects I have been putting off is the rebuild of my headlight containers.  The headlight directional adjustment pieces were made of plastic. Two of the four had already broken, so I knew I’d have to fix them eventually.

After pondering the situation, I chose to remove the existing directional adjusters off the CJ-3A headlight containters I had.  I really hate damaging these original pieces, however I also knew that the oldsmobile units I use are even harder to find.

Here’s what the original headlight adjusters looked like:

headlight_old_pieces

Here’s a closeup of the plastic piece (out of focus):

headlight_old_piece1

Here’s the ‘new’ piece that has been cut down so that it will fit (another beautiful pic .. not)

headlight_piece_new

Here are the pieces riveted onto the headlight container.  One more rivet to go.  You can see the old, (blurry) rivets just underneath the new pieces.  Once these were installed, I painted them and put everything back together.

headlight_new_pieces

 
To Top

1942 GPW Madera, Ca $5500

• CATEGORIES: GPW (Ford MB) • TAGS: .

1942_gpw_maderaKind of a funky paint job, but it would probably clean up well.

“Rare 1942 Ford Jeep WWII. During WWII Willys-Overland Co. could not produce enough jeeps to meet the war demand, thus Ford starting producing jeeps in the exact image of the Willys model so that the parts were interchangeable. Sense limited production were produced these jeeps are a rare find. The jeep has been garaged and in our family for over 20 years. For those collectors out there this jeep can easily be restored to its original glory. I believe the seats and rollbar and rear bumpre are the only changes made. The jeeps body and engine are in great condition, I drove the jeep this past weekend around the farm. Please send me an email at katzjigs@yahoo.com or call 559-446-1071 and leave a message if you are interested and we can arrange a viewing.”

http://fresno.craigslist.org/cto/1300785489.html

 
To Top

Year? MB/GPW Pelham, NC **SOLD**

• CATEGORIES: GPW (Ford MB), MB

Aaron picked this jeep up for only $520 on eBay!

View all the pics on eBay

year_mb_pelham

 
To Top

1962 FC-150 Easton, Ct eBay

• CATEGORIES: FC150-FC170-M677

Here’s a great old FC-150.

“RED 1962 WILLYS FC150 JEEP.  ENGINE AND TRANSMISSION  NOT IN TRUCK. ENGINE ON GARAGE FLOOR RUNS SMOOTH AND QUIET! COMES WITH ANOTHER ROLLING PARTS CHASSIE.  SOLD WITH BILL OF SALE ONLY! I NEVER REGISTERED OR DROVE IT ON THE ROAD. ASK ALL QUESTIONS BEFORE BIDDING. DO NOT BID AND THEN WIN AUCTION AND THEN NOT PAY FOR IT!! ANY QUESTIONS YOU CAN CALL ME DURING THE DAY 8 AM TO 2 PM OR WEEKENDS BEFORE 8 PM. MIKE AT 203/268/4547. LOCATED IN EASTON, CONNECTICUT 06612.”

View all the pics on eBay

1962_fc150_easton

 
To Top

DJ-3A Body and Fiberglass Front Clip Tucson, Az $550

• CATEGORIES: Body Parts, DJ-3A

dj3a_body_fiberglass_clip_tucsonUPDATE:  Price dropped to $550.

This looks in great shape.  A DJ body in this good of condition isn’t easy to find.

“Willys flatfender style steel body with flip forward fiberglass hood/fenders. Comes as shown in pics without seatbelt harness. Pretty straight, very slight surface rust, no scaling. Not perfect but could be with some tlc, or use as it as is. Perfect for your project. No title/no frame. No other jeep parts. May entertain trades. Looking for a trailer for quads or hauling cars/trash. Price is firm. Thanks fer lookin'”

http://tucson.craigslist.org/pts/1290381554.html

 
To Top

1951 CJ-3A Dallas, GA **SOLD**

• CATEGORIES: CJ-3A

1951_cj3a_dallasUPDATE: **SOLD** Was $1000

This might not be a bad price.

“1951 willys jeep, was running a year ago needs carb cleaned and fuel lines and tank cleaned. supersonic L head engine original motor. Top needs to be cleaned and is missing strip that hooks it to the top of the windsheild can get from bestop maybe 15 to 20 dollars. Does not need much to have running. Also has lock out hubs, three speed trans, two stick transfer case. Would make great project restore or rock crawler”

 

 
To Top

1948 CJ-2A Reno, NV **SOLD**

• CATEGORIES: CJ-2A

1948_cj2a_reno3UPDATE: **SOLD** Was Free

It appears this is a free jeep.  That’s a good price!

“1948 Willys flat fender jeep rolling chasis with axles, tires, tranny, t-case. Great for project or for the rare spare parts.”

 
To Top

1947 CJ-2A Cambria, IL **SOLD**

• CATEGORIES: CJ-2A

1947_cj2a_cambriaUPDATE: **SOLD** Was on eBay

Here’s a CJ-2A with welder and a ton of extra parts.  The body on the jeep is pretty rotted.

“The Jeep is very rusty and will require complete restoration. The welder appears to be in fair condition with what appears to be a mouse nest in it. I purchased this sitting out in a field with the intentions of restoring it, but I just do not have the time to work on it. I have seen advertisments of the old CJ2A’s with the welder generator shown and this is the only one I have ever seen with it on it. The belts are even still on it, but all three are broken. It also has an original winch…”

 
To Top

1963? DJ-3A Surrey? Rising Fawn, Ga eBay

• CATEGORIES: DJ-3A • TAGS: , .

I’m not sure if this is actually a Surrey or not, but it’s definitely a 2 Wheel Drive DJ-3A.

“Up for bid is a Surrey Gala pink Willys Jeep. I do not know an exact year the Jeep was made (the year I put above was a guess). The Jeep was painted over but there is still lots of pink showing all over. The Jeep runs. Carburetor needs rebuilding it runs way to rich and leaks gas. The gas tank has rust in it and clogs up fuel filters. Column shifter is broken at top of shift handle. I have been shifting with vice grips, transmission shifts good and appears to have had been rebuilt, dope looks brand new and case has been cleaned to bare metal. Seat frames are very solid and springs seem in very good shape, steering wheel has some cracks in it. The windshield glass is broken and the windshield frame is very solid but it has some rust spots, the hood hinge was broken and somebody put screws in it. Bowl for air filter is missing. A hole for a radio was cut into dash. The body tub only has two holes rusted through, one on the right side at the body support above the fender step and the left side at top of wheelwell underneath a roll bar that was in it…. ”

View all the pics on eBay

year_dj3a_risingfawn

 
To Top

1949 CJ-2A Longview, WA **SOLD**

• CATEGORIES: CJ-2A

year_cj2a_longviewUPDATE: **SOLD** Was $2800

This looks like a fun little CJ-2A.  I wonder if the bars attached to the windshield from the roll bar are intented to support the windshield?  It’s a good strategy to help reduce stress on the windshield.

“Bright yellow.12 volt conversion with new 1 wire alternator.rebuilt starter, all light including turn work great. Has stoway towbar that folds flat on front bumper.(NO TOP) new master and brake cylinders. Tires are larger radial on white spoke wheels(NO SPARE) New e-brake cable yet to be installed along with 4 leaf after market springs.”

 

 
To Top

1946 CJ-2A Medford, OR **SOLD**

• CATEGORIES: CJ-2A

1946_cj2a_medford4UPDATE:  Was $2500. **SOLD**

This looks to be a good foundation for a great little trail jeep.  Though this is a non-running project at this point, it does have a number of quality upgrades.

“46 willys,1962 buick 198 v-6 rebuild 1 hour run time,sm 420 trans,5:38 gears,dana 30 disk brake,dana 44.lots of new parts,16 gallon fuel cell,frame boxed,power steering and power brakes.rear brakes are 11 inch.needs a few things to drive this rig.”

 
To Top

1953 CJ-3A Concord, Ca **SOLD**

• CATEGORIES: CJ-3A

1953_cj3a_concordUPDATE:  Was $4000. **SOLD**

This looks like a real nice flattie.

“This has been a great Jeep but I’m moving on. 231 Buick v6, TH400, Power steering, Revolver shackles, Open knuckle Dana 30 front axle with an air locker, Dana 44 rear axle with Warn floating hubs and an air locker, 4:56 gears, Nice top and doors included. $4000 obo,”