To Top

4 15×7 Hurricane Rims Bernville, Pa eBay

• CATEGORIES: Tires and Rims

HOG spotted these.

“We just parted out a Jeep CJ and it had the Turbine wheels on it. They are nice wheels they are 5 on 5.5 so ther fit the 5 Lug ford and some Jeeps. There are a set of 4 wheels they are made by Superior Industries the part # inside is 39-578X. Comes with the lug nuts off the Jeep.”

View all the info on eBay

To Top

1949 CJ-3A Idaho Springs, Co $900


It runs …. No pics provided.

“I just picked her up and some “stuff” came up, so I need to sell the Willys. Most importantly, it does start and purrs like a kitten. There really wouldn’t be a ton of work to make it roadworthy. If you have any questions, feel free to call or email.
Thanks and have a good day. 303-229-0727 I don’t have text.”

To Top

1946 CJ-2A Waco, TX **SOLD**


UPDATE:  **SOLD** Was $1400

I’m guessing the wood piled on top of this jeep indicates it doesn’t run.

“1946 Willys jeep. Rebuilt motor. Project jeep.”


To Top

1946? MB Groesbeck, Tx $1500


That’s a MB or GPW body that might not be too bad under all that surface rust.

“46 Willys Jeep, only second year sold to civilians, V8 302, project, not running, barn find, have 2 sets of tires and wheels, one set has Dick Cepek tires, SW guages, B&M shifter. 254 729-8473 $1500. firm or trade for nice mower.”

To Top

1947 CJ-2A Willow Springs, Mo $1800


No pics provided.

“For sale 1947 Willys Jeep with 1946 Willys jeep extra for parts. for more informations please call 417-252-0883”

To Top

Year? CJ-3A? White Oak, TX **SOLD**

• CATEGORIES: CJ-3A, Last Ride

UPDATE: **SOLD** Was Make Offer

“I have a 1940s to 50s model jeep willys for sale, needs a new floor pan and engine overhauled, everything is intact, make an offer needs to go asap…. also have a gm 454 engine with a granny 4 spd tranny, a 318 with granny 4 spd tranny transfercase and dana 60 an 44 rear and front axles out of an 85 dodge 3/4 ton 4×4”

To Top

1946 CJ-2A Burnet County, Tx $200


There might be $200 of value here.

“1946 Willys Jeep 4×4
vehicle has no title,being sold for parts, bill of sale will be given
The jeep was running when parked 8 years ago for a hub issue, the hub was pulled and never repaired and the jeep has sat in the same spot ever since(hence the trees growing up around it). Jeep does not currently run, but all drivetrain components(engine,transmission,transfer case,differentials,axles) are fine. The drivetrain is the original Willys flathead 4 cylinder,3 speed tranny, all complete. The hood,front fenders,grill,tailgate and dash are in good shape. The tub(floorboard area) is completely rusted out. The frame is badly rusted on the back half, the front half looks strong and useable. The buyer will need a trailer,ramps, and a winch to transport the jeep, we can provide some assistance with loading if necessary. If interested, please call Scott at 512-844-3218, do not email.
The tow bar in the picture is not included in the sale of the jeep and will be removed this weekend.
Thanks for looking.”

To Top

2 Pickups and 1 1953 Wagon Alton, NH $1000


No pics provided.

“I have three willys projects for sale.One is a 1953 willys wagon but has no motor. This is in decent condition body wise. The other two are pickups only one of these has a motor. They come with several other parts. I would like to get 1000 OBO for all three if intrested email or call 603-387-1372”

To Top

1949 CJ-3A Idaho Springs, Co $900


It runs …. No pics provided.

“I just picked her up and some “stuff” came up, so I need to sell the Willys. Most importantly, it does start and purrs like a kitten. There really wouldn’t be a ton of work to make it roadworthy. If you have any questions, feel free to call or email.
Thanks and have a good day. 303-229-0727 I don’t have text.”

To Top

1947 CJ-2A Tahoe, Ca $3800


No pics provided.  The seller says this was going to be an old school build and it sounds that way.

“This was going to be my retirement project – an old school jeep build. Here’s what you get :stock ’47 in fair condition with a good running later model F-head engine. 2 spare tubs with some decent sheetmetal, 1 excellent spare frame, sandblasted and primed, 3.8 Buick v-6 w/ t98 4 sp. and dana 18 bolted together w/ all adapters, new Novak motor mounts, 1 spare hood, new M-38 windshield assembly with tinted glass, FF rear Dana 44 w/ Detroit locker, front Dana 27 w/ Lockrite, disc brake kit, Herm p.s. kit, new Superlift 2 1/2″ lift kit, 3 Willys tailgates (1 new), 2 gas tanks (1 new), U-bolt skid plates ( new), 2 pr. 1 pc. shackles (new), rear tube bumper, rear seat and lots more small parts ( new and used ). Also available is an excellent M-416 trailer  with the jeep buyer having 1st option on. I will try to post pics in the next few days. If intersted send me an e-mail and a phone #.”


To Top

1948 CJ-2A Spicewood, Tx **SOLD**


UPDATE: **SOLD** Was $2200.

It runs and drives. It looks like it is missing a few parts and patched.

“1948 Willys Jeep….Have clear Texas title…..runs great, does not smoke, good tires, needs windshield, converted to 12 volt. Great project or use as is. Price is firm.”

To Top

Ohio Flat Fender Gathering

• CATEGORIES: Features

To Top

1942 MB Slattie Boise, Id **SOLD**


UPDATE:  A Buyer bought this through the ‘buy now’ button. It will be restored.

“You are bidding on a 1942 Slat Grill Willys mb.  The serial number is MB 114517 DOD is 1/27/42 the Toe gusset # is 17920.

The Frame tag and dash data plate match.

Overall the jeep would make a great restoration project. Please take the time to go through all the pictures I’ve attempted to leave nothing out.

The jeep comes with a lot of the hard to find ORIGINAL parts such as an actual slat grill grill, Gas Gauge, 5 mph increment speedo (needs work the needle is broken), 30/30 amp guage, hinged filtertte, Rear seat, top bows, bumper, and an STL pintle.

The body is pretty straight  and solid with the exception of a patch in the passenger floor board, a little rust in that passenger seam, some skimmed areas of body filler on the tub and rust out in the fuel tank sump and shovel area. The hat channels are decent but some will need  a little repair. Again this is a very nice solid start (PLEASE TAKE A LOOK AT THE PICTURES IN SLIDE SHOW)

The frame is very nice and has the original bumper gussets and frame tag.

The motor does run when hot wired and the jeep rolls easy. The T84 transmission transfer all seemed to function just fine.

The motor is a bit of a mystery as the boss where the serial number should be is completely unstamped.  The casting at the lower part of the engine is correct for what should be in a slat so I think it would pass a two foot test  and I guess you could stamp the boss with what you want if you wanted it to pass for the actual original motor. The head is an early one with the two bolt thermostat.

I do have a number of other parts that will be included such as top bow brackets, body handles, and voltage regulator; These are all pictured in the slide show which has over 160 pics. (IF IT FAILS TO LOAD THE FIRST TIME HIT REFRESH AND if you still you still have problems let me know)

Don’t miss your chance to own this great Slat grill MB project, It has a lot of the hard and nearly impossible to find parts and a ton of potential.
I do have an open clear Idaho title from the last owner and I can put it in my name if this is any what of an issue for you.”


To Top

1952 Truck Tennessee **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE: Was on eBay. **SOLD**

“Up for auction, fresh out of the hills of Crossville, Tennessee, another Willys. I have been in the paint and body work field for over 25 years in Florida, I have restored several Willys Jeeps (CJ2A, MB’s, etc) in Tennessee and sold them here on eBay, but I decided this time around to do a 1952 Willys Truck.

This truck would make a perfect store front display or a movie prop. Runs great!

This is all original with the exception of a custom solid oak (seasoned oak) bed! The bed is stained “Golden Oak” and polyurethane cleared. After doing research on these trucks I realized how cool they look with the slat sides, and the fact that this arrived without the original steel bed, my decision was made. Special thanks to my dad who is an amazing woodworker; this truck is now truly a one of a kind! Custom wood burned WILLYS logo on center back oak slat. Interior door panels are also oak wood and stained. You might find other 1952 Willys trucks on the internet, but you will never find another one like this.

Frame was completely sandblasted and painted with automotive gloss black. All original metal, floor was previously replaced in the cab. All dents and rust completely removed, sandblasted, welded, body worked and custom painted. Paint is a two tone tan and brown. Colors used are “Cream in my Coffee” (tan) and “Chocolate Turtle” (brown). This color combination has had more compliments than you can imagine, especially with the golden oak stained bed.

Engine: 6 volt original Hurricane 4 cylinder F-Head. 134 cubic inch. Engine was rebuilt by NAPA in 2002, runs perfectly.

Drive train: T-90 3 speed manual transmission. T-18 transfer case, hi-lo 2 speed. Original self locking hubs. 4 wheel drive works perfectly. Original Timkin clam shell rear-end, last year they made them! 5:38 gears front and rear. (5) 16″ original wheels.

Electrical: Original 6 volt system, but has been rewired for 12 volt system. All you need to convert it to 12 volt is a 12v alternator, relay and coil, 12v battery, and change the lights. Already has a 12v electrical gauge installed and new 12v turn signal assembly on the column. The original vacuum wipers still work. Horn works too!

Items that are brand new consist of:
(4) new shocks (custom painted to match body), new brake cylinders, new brake lines (brakes work as good as new!), new wheel studs (now all RIGHT HAND threads), new chrome lug nuts, (5) brand new Maxxis Mudder Buckshot tires, new battery cables, new rebuilt starter, new rebuilt fuel pump, new exhaust (from manifold back including new muffler), new front axle seals (did I mention the 4×4 works perfectly), new 6volt head lights and chrome rings, new parking lights with chrome rings, new floor mats, new custom covered arm rests, new oil pressure gauge. New brake and clutch interior rubber pedal covers.

I have a clear Tennessee title and a Willys Logo key chain in my hands. She also has a fresh coat of wax.

Serial number: 452EC113384
Mileage: 33, 602

Items that I am including with the truck:
A box of original parts including, lights, interior heater vents and interior heater hose. Original head light brackets, Brand new oil cooler and filter, original door skins, original tail gate “skin”, not the complete tail gate (someone cut the entire center skin out of the original tail gate) has logo. Another front cowling (goes behind the front bumper), and a new rear window interior frame. Also have another spare tire steel side mount bracket”



To Top

1948 CJ-2A Post Falls, ID **SOLD**


UPDATE: **SOLD ** Was $5500

(07/20/2011) “1948 restored CJ2A Jeep for sale. was completely redone about 20 years ago and has been stored in a garage since then. Every summer It is driven enough to replace the gas and is started every once in a while. Good running jeep. When restored, the 4 cyl jeep engine, transmissions, and differentials were rebuild. The body was redone and painted. no rust and in excellent shape. Has 12 volt jeep generator and regulator. Has signal lights. 15″ jeep wheels with radial tires. New seat covers. when restored. ”

To Top

1945 CJ-2A? Monrovia, Ca $4400


Well, it isn’t original.  This is a collection of parts.

“Yes, an original 1945 Willy jeep. Complete, running, registered! New tires. Currently a bimini top for summer. Has second full enclosure with doors. All original. $4400 obo (626) 319-5905”

To Top

1946 CJ-2A Spring Valley, Wi $6500


This looks like a good price.

“1946 Willys Jeep, CJ2A. Excellent condition!!! Runs great. Everything works. New body installed 2004. Frame was cleaned and painted. New wire harness, lights, brake lines and hoses. Transmission and transfer case rebuilt 2005. Converted to 12 volts. My dad has owned this jeep for over thirty year. Always kept inside. Reconditioning this jeep was his dream for many years. Now it needs to be sold.
Too many new parts to list.
Call Steve 651.319.2572, for more information.”

To Top

1946? CJ-2A Keyser, WV **SOLD**


UPDATE: **SOLD** Was $1000

The seller lists this as a 1950, but the grille suggest 1946.  Are there tool indents? I can’t quite tell.

“I have a 1950 Jeep WIllys CJ2a. Its in need of total restoration. It rolls and has original engine. Some spare parts.”

To Top

1953 CJ-3B Ballwin, Mo $5000


UPDATE:  This is still available.  Last for sale in 2009.

Here’s a great looking CJ-3b.  I think the price is right on this one.  It should go quick.

“Willys CJ3B for sale in great working order. I think this is a 1954 Willys but I will have to verify. Starts, runs, and drives great. This was my grandfathers Jeep and I am selling it for my folks. Jeep was restored by my uncle and he did a great job but it is not a concourse restoration. Engine has been rebuilt along with all engine components. Transmission, transfer case, and axels had fluid and seals replaced. New wiring and top. Brakes rebuilt and stops great. Tires like new. Email for link to see additional pictures. Serious inquiries only. Price is firm. Thank you. Call Jeff at 314-983-9974.”


To Top

1950 CJ-3A Sierra Vista, AZ **SOLD**


UPDATE: **SOLD** Was $4300

I’m thinking this is a CJ-3A with a replacement body, hence the solid tub.

“For sale 1950 Willys CJ3A, clean title, has some surface rust but is not rusted through anywhere (no cancer). I bought it as a CJ3A, but this might be a first generation M38, it has military seats, military bumpers, a glove compartment (only m38 had it, not the civilian version), a military hard top. The engine runs smooth, was rebuilt less than 3,000 miles ago by the last owner. It has the original L134 “Go-Devil” 4 cyl engine, original transmission and transfer. Runs good, all stock except for tires, wheels, and a couple of aftermarket gauges. Top speed of 45-50 mph. This is a great daily driver as it sits or you could make a great restoration project out of it. Selling because I have too many toys and have to downsize the fleet before my new son/daughter is born. $4300 OBO, not interested in trades.”

To Top

1961 CJ-5 Missoula, Mt $1650


I thought the coloring on this was unusual.


To Top

1946 CJ-2A Melbourne, Fl **SOLD**

• CATEGORIES: CJ-2A, stainless/jewels • TAGS: .

UPDATE: **SOLD** Was $7000.

This has an aluminum body.

“Custom and very beautiful aluminum bodied 1946 Jeep Willy. A real collector or jeep lovers delight. Runs great and is a blast to drive. Has been stored in a shop and handled with care. Included is a new set of 31″ Super Swampers and if interested a custom fabricated and machined aluminum grill. Drivetrain and body are in excellent condition”

To Top

1948 CJ-2A Milford, IA **SOLD**


UPDATE: **SOLD** Was $7500

This looks good.

“For sale is a green 1948 Willys Overland CJ-2A. It has an operational PTO (power take off). It has virtually no oil drips. The Jeep starts, runs, and drives well. Transmission shifts smoothly and the 4wd system shifts in/out and works just fine. I reverted the system back to 6 volt for nostalgic purposes but the 12 volt resisters are still in place to convert it back. Tires have about 500 miles on them. This Jeep is road worthy and I have the title ready to sign over to you. It is hard to find these things in the shape she is in. I’m sad to part with it, but I bought it as a “getting out of the military gift to myself,” and now it’s time to move on to the next fun project. I can’t provide details on its history prior to my ownership, but I can give you details on every repair since I have owned it. It comes with a complete soft top, Willys Overland CJ2A reprinted mechanics manual, a spare set of spark plugs and a spare paper oil filter”

Price: $7,500.00 Cash/Money Order
Make: Willys Overland
Model: CJ-2A
Mileage: 41842
Location: Milford, Iowa (approximately 1.5 hours east of Sioux Falls, South Dakota)
Engine: I-4 60hp “go devil”
Electrical: 6 volt

Repaired/Replaced/Rebuilt the following:
1. Rebuilt starter
2. Replaced starter switch
3. Rebuilt 6v generator
4. Replaced voltage regulator and wires
5. Replaced front and rear pinion seals
6. Replaced brake master cylinder and lines
7. Replaced right inner tie rod end
8. Replaced both forward U-joints
9. Replaced front left wheel brake cylinder and brake shoes
10. Replaced transfer case output seal
11. Replaced transfer case and oil pan gaskets
12. Replaced distributor rotors and cap
13. Replaced ignition contacts and condenser
14. There are a few other minor things. I have all the maintenance paperwork for review.”


To Top

1952 CJ-3A Port Angeles, Wa $6500


UPDATE:  Still Available

(09/05/2011) The running gear is from a Toyota.

“Its on toyota running gear 5.29 gears, full spool locker in the rear, arb locker in the front highsteer. Rs 9000 shocks. 5 brand new 38.5 11 15 boggers, hot knifed. Buick v6 motor, 4 speed trany, danna 300 tranfercase. Warn 8000 upright gear driven wench. 3 kc lights on front. Full skid plate. Hid head lights. Call Zech 360-808-5057. interested in trade for quads or rhino harley toyota, etc call me”

To Top

1952 Truck Sioux Falls, SD **SOLD**

• CATEGORIES: Willys Trucks • TAGS: , .

UPDATE: Was $15,950. **SOLD**

This looks nice.

“1952 Willy’s Jeep 4×4 Trucks on the market today! This Has to be one of the nicest 1952 Willy’s Jeep 4×4 Trucks on the market today! Fully restored in 2003 with receipts and a full book of info. Absolutely no filler this was a rust free survivor before restored. If you are looking for one of the finest examples of a 52 Willys Truck available today you found it. The body was completely removed and was a frame off restoration reconditioned with new or restored parts! All new glass original chrome was re-chomed where needed! Upgraded 12V system runs and drives as it should No Disappointments!!!! Stacks of receipts! Previous owner has only driven it about 200 miles since restoration!!! $15,950 Trades Welcome”