To Top

1955 Wagon Rush, Ny **Status Unknown**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE:Was $2500. **Status Unknown**

The body doesn’t look too bad.

“UNMOLESTED !!! All original 1955 Model # 6-226 4×4 SW 54168 Willys Station Wagon 4 Wheel Drive 32,492 original miles. Original 6 volt system. Garage kept most all these years. Recently licensed and on the road. I drive it around most every weekend

Well researched pedigree – Purchased new in 1955 by Frank C. Moore, Lt Governor of NY from 1951 to 1953 for use on his Great Camp in Indian Lake, NY. Kept at the great camp from ’55 to 1985 then transferred to a groundskeeper in 1985-ish. Then sold to another individual around 1987 or so. Then sold to a fellow in Canadice, NY. Then sold to me. I’ve had the truck since early 2007.

Runs very well. Body o.k. obviously a bit of rust but solid and stable. Brakes are good although they must be pumped. Frame as good or better than most you will find Roughly 3,000 miles on new non-direcitonal military style tires. Gauges work. New plastic gas tank.

 
To Top

1959 FC-170 Superior, Wy $4000

• CATEGORIES: FC150-FC170-M677

1959_fc170_wyUPDATE:  Still Available.  More pics at the link below.

(01/03/2009) While there’s some surface rust, it doesn’t appear to me that there is much rust around the doors.  The fact that it starts and runs is worth something!

“1959 Willy’s Jeep FC 170.  All original, 3 sp trans w/Super Hurricane 6 cyl, 9ft bed, approx 68,000 miles; Has some glass/weather stripping; Needs brake work, Always Starts, Runs Great.”

http://www.ksl.com/index.php?sid=0&nid=443&tab=list/view&ad=2385946

 
To Top

Engine Update and the Invention of the PCV Valve

• CATEGORIES: Biscuit

I made some more progress with the engine today.  I managed to get the oil to finally stop exiting the dipstick hole.  The cause was, as I suspected, related to the crankcase pressure. So, I spent some time fiddling with the PVC and breather system.

First, I bought a new PCV valve.  Next, I connected the valve cover ‘breathers’ together with the intake breather and fed them into the aircleaner.  Now that the pressure is a bit more equalized, the oil stopped getting pushed out the dip stick hole.

So one problem down, but now a new one.  The air getting cycled into the air cleaner was ‘dirty’ enough that it was affecting performance a bit.  However, I’m hoping once I get the new jets for the carb,  it will stop burning so rich, which will clean up the system.  That’s the theory anyway.

While I was researching breathing systems, I learned a bit of history about the PCV Valve. It turns out that PCV valves were invented during WWII to enable tanks to ford deep water and still have their systems breath appropriately.  Following the war, someone at the GM plant where the PCV Valves were built realized they could help combat some smog issues. You can learn more about this at Wikipedia.

 
To Top

Hobart Welder Gunlock, Ut $500

• CATEGORIES: Industrial-Welder-Generator, Machinery, Unusual

Brett spotted this Welder.  These are usually priced between $800 – $1200, so this appears to be a good price (if the fix is easy).

“Hobart Welder. 250 Amp 40 Volt. Willys engine. Welder was not making power when machine was parked. But the Willys jeep engine still ran. no emails. Please call 435-632-2415”

http://www.ksl.com/?nid=218&ad=10401670&cat=&lpid=

 
To Top

1945 MB Taylorsville, Ga **SOLD**

• CATEGORIES: MB

UPDATE: **SOLD** Was $3500.

I think the passenger side body has been repaired, but generally doesn’t look too bad.

“1945 military jeep wil 4 cylinder”

 
To Top

Wanted: A reader in Indiana is looking for a few items

• CATEGORIES: wanted

A reader named Steve is looking for a MB Grille, a Roll Cage that will fit a M-38 and a set of Ford V8 Headers that will also fit a M-38.  Steve lives in Indiana.  If you have any of these items, you can contact Steve at muddin61@yahoo.com.

 
To Top

1950 M-38 Gatesville, TX **SOLD**

• CATEGORIES: M-38 • TAGS: , .

UPDATE: **SOLD** Was $6500.

This looks like a pretty nice M-38 with good accessories for the price.

“For Sale: 1950 Willis Jeep. This is a Korean War vintage military jeep. I have owned this jeep for over 23 years. It is an older restoration – – the engine has been rebuild, and has less than 1000 miles on it. It has working radios. The jeep has been in many parades. It runs and drives good. The brakes are good. It comes with a canvas top. $6,500.- with radios or $6,000.- without radios. I have more pictures if you are interested”

 

 
To Top

1952 M-38 Pueblo, Co **SOLD**

• CATEGORIES: M-38

UPDATE: **SOLD** Was $500.

This looks like a very good price.  It runs, too.

“OK, I NEED THIS GONE. 500. IS A GREAT DEAL FOR THIS JEEP. 719-778-8995. MOTOR RUNS, NEEDS A MASTER CYLINDER, BRAKES NEED FIXED! YOU CAN TOW THIS HOME WITH A 7 1/8 BALL. FLAT HEAD 6 CYLINDER.”

 
To Top

1952 CJ-3A Central Square, Ny $500

• CATEGORIES: CJ-3A

I’m not sure there’s much to salvage, though the transfercase knobs look good.

“This is a 1952 Military style jeep, model 452-GB1. Willy’s Overland Jeep. Has a original 40hp 4cyclinder hurricane engine. 4wd Drivetrain complete. On tires and wheels for towing. (315)- 383-2274.”

http://syracuse.craigslist.org/cto/1694931270.html

 
To Top

1961 FC-170 Edgewood, Nm **Status Unknown**

• CATEGORIES: FC150-FC170-M677 • TAGS: , .

UPDATE: **Status Unknown** Was $10,500.

“Restored to original. 3/4 ton, 4WD. Super Hurricane 226 6 cyl. engine, 3 speed transmission, 33,000 original miles, all in NM. Looks great, runs great.”

 
To Top

1947 CJ-2A Wilmington, NC **SOLD** for $4500

• CATEGORIES: CJ-2A • TAGS: , .

**SOLD**

The seller explains why this was painted pink.  Looking past the pink color and it appears this CJ-2A is in excellent condition.

“1947 Willys CJ 2A – two tone hot pink. This flat fender Army Jeep runs great and is lots of fun. It has been kept in a garage or under shelter for the last 8 years. It has been converted from the original 6 volt system to 12 volts and has new breaks on it. It is an eye catching head turning vehicle they people go crazy over taking pictures of it with their cell phones and cirling back to get another look at it. It was painted hot pink by the previous owner in KC who modeled it after Elvis’ jeep he saw at Graceland. The exact milage is unknown.”

View all the pics on eBay

 
To Top

1942 MB/CJ-5 Thorndale, TX **SOLD**

• CATEGORIES: MB

UPDATE: **SOLD** Was $2000.

The rear part of the body is from a CJ-5 or M-38a1.

“’42/’43 Model. Front and rear body are different model but match nearly perfect. Motor runs great (starts easily, does not smoke). Drive train is OK, but shows some wear. Body is rough but no rust. I have title. I have used it as a ranch/hunting vehicle and is perfect for it.”

 
To Top

1946/50 Jeepster Campbell, Ny $10,500

• CATEGORIES: Jeepster • TAGS: , .

Here’s a fun Jeepster.

“1950 Willys Jeepster, title is a 46. This is a quick little car, that runs great, steers and stops like it should. No frills just a cool little drop top driver. I bought it as a basket case and replaced or rebuilt pretty much the entire car. This car is made to drive, no bull, just you the road and a V8 growl out the back from three inch pipes. You can spend time driving or waxing, if you’re a waxer car show guy, this is not your kind of car. I completed the car three years ago and it is 100% dependable.

DRIVE TRAIN
350 small block Chevy bored .060 over, nice Summit cam train with alloy roller rockers, big 2.02 valve heads with three angle valve job done by local NAPA shop, Offenhourser intake and Edelbrock carb, HEI, vintage Offenhourser valve covers, aluminum pump and large core aluminum radiator, one wire alternator, mini starter, block-hugger headers dump into custom. 2 ½” exhaust back to 3” out the rear. Borg Warner 5 speed trans with 11” hydraulic clutch and S10 Blazer rear end.

SUSPENSION and BRAKES
Power front disc with drum rear, all brake components are new, to include all lines, Rack and pinion steering with modified Willys column, new tires and chrome wheels.

BODY & INTERIOR
New top, including wood bows, new side curtains, new upholstery, custom engine turned stainless instrument panel with new gauges and switches, new wiring harness, custom welded in floor pans, four seat belts.

I have a new project, and just too many cars, this one has to go. Call Dave @ 607-527-8847  for more info”

View all the pics on eBay

 
To Top

Column Shift Stretched CJ-2A Bonsall, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , .

This was bought.  Interestingly enough, it’s registered as a CJ-2L.  You can learn more about it here.

So, get it while it lasts and then drop ewillys a donation for finding this extremely rare vehicle for you!

1946 Willys Jeep stretch ….$1850.00 o.b.o. No emails please….Come check it out and make an offer!”

 
To Top

1953 CJ-3B Colorado Springs, Co $7000

• CATEGORIES: CJ-3B • TAGS: .

It looks nice. No description.  877-304-0863.

http://cosprings.craigslist.org/ctd/1695863692.html

 
To Top

Tandem Axle Trailer Smokey Point, Wa $850

• CATEGORIES: trailer

Here’s a great price on a tandem axle trailer.

“Tandem Axle Car trailer, Very heavy duty, Good deck with tie downs, 7 pin elect connector, Elect brakes, asking $850, need to sell, too many toys, chuck, 425-422-6590.”

http://seattle.craigslist.org/sno/cto/1694979769.html

 
To Top

1953 CJ-3A Elk River, MN **SOLD**

• CATEGORIES: CJ-3A • TAGS: , .

UPDATE: **SOLD** Was on eBay

This is a good looking flat fender.

“This is a 1953 Jeep Willys CJ3A. There is NO RUST the body was all redone! The motor is a AMC 360 runs great was rebuilt about 12,000 miles ago. Has A 3 Speed Tranny. This winter the whole jeep was tore all apart and here are a list of things that were done … (see all the items done to this at ebay).”

 

 
To Top

1943 MB Lyons, Or $1500

• CATEGORIES: MB

Well, this is unusual.

“43 WIllys with Toyota front axle, Nissan rear axle. 31×15.50 Terra tires on 14″ wide wheels. Frame fully boxed in and ready for motor mounts etc. 4″ lift toyota springs. Lots of extra parts. $1500.00 obo or Trade for alum. Boat with motor, Car trailer, Forklift, ATV, etc. Also willing to part out. Please Call Kenny at 503-931-3547”

http://salem.craigslist.org/bar/1695239917.html

 
To Top

Jeepster Parts Scappoose, Or

• CATEGORIES: Jeepster

If you need some Jeepster parts, you might contact this seller.

“I HAVE SEAT FRAMES, WINDOW GARNISH, SEAT SPRINGS, 2WD WHEELS, MANY OTHER PARTS.  E MAIL WITH NEEDS AND I WILL SEE IF I HAVE IT.  THANKS JACK.”

http://portland.craigslist.org/wsc/pts/1694490107.html

 
To Top

Wanted: CJ-2A Column Shifter Portland, Or

• CATEGORIES: wanted

Here’s a buyer for a column shifter.

“in need of cj2a column shift and linkage,,,,,complete please ike @ old car parts—503-771-9416”

http://portland.craigslist.org/mlt/wan/1695703587.html

 
To Top

1956 Truck Amboy, Wa $1800

• CATEGORIES: Willys Trucks

There might be some value here.  The engine looks good and it has posi in the rear.

“1956 willys pu chevy 305 engine,87′ 700r4 trany and transfercase power steering, disc front brakes, complete boxed frame not just plated but c chaneled, completely rebuilt rear end with posi and new brakes done by woodys 4×4,still needs a lot of work it is a project, 31″ tires but 38’s would fit no problem was going to be a toy but no time or money,runs and moves, can deliver $1800.00 O.B.O. 1-360-936-5943 Dene”

http://portland.craigslist.org/clk/cto/1695179951.html

 
To Top

2 15×10 & 2 15×8 Hurricane Rims Oregon City, OR **SOLD**

• CATEGORIES: Tires and Rims

UPDATE:  **SOLD** Was listed at $350.

“Western Turbines with polished fins, hub centers and outer lips. come with brand new center caps (5 of them ). The caps are American Racing brand. They are the only ones I could find to fit the center holes properly.  2 each 15×8 and 15x 10 all with Ford 2 WD pickup 5 on 5.5 bolt pattern.  No chips dings, bends, scratches, etc. These are NICE !!! Asking $350 or best REASONABLE offer.”

 
To Top

1963 CJ-6 Alton, NH $700

• CATEGORIES: CJ-6

UPDATE:  Price dropped to $700

(04/01/2010) “This jeep runs and drives strong 4cylinder huricain engine with 3speed trans the frame is solid but she needs some body work. Matt 603-581-3034”

http://nh.craigslist.org/cto/1695477923.html

 
To Top

1951 CJ-3A Plymouth, NH **SOLD**

• CATEGORIES: CJ-3A

UPDATE: **SOLD** Was $4500

(11/16/09) Looks solid.

“1951 Willys Cj3-a with fisher power angle plow.  Good Condition.”

1951_cj3a_plymouth

 
To Top

Fulton windshield defroster Nampa, ID **SOLD**

• CATEGORIES: Parts

UPDATE: **SOLD** Was $350.

There’s was another one of these for sale on eWillys. It was priced at $125.

“Just trying to find a local interested party in a Willys Jeep de-icer defogger unit. This was made by the Fulton Company. It was found in my grandfathers old stuff.”