To Top

1955 CJ-5 Clarkston, Wa **SOLD**

• CATEGORIES: CJ5 • TAGS: , .

UPDATE: **SOLD** Was $4200.

“Only 23,000 miles on this nice original Jeep. Stored indoors so very little rust. Metal half cab. New tires, powdercoated wheels including spare. F Head 4 cylinder moter runs great”

 
To Top

1949 CJ-2A Plummer, Wa $1500

• CATEGORIES: CJ-2A

UPDATE:  Still available

(04/30/2010) It’s hard to tell much from the photo.

“1949 willy’s cj 2a willy jeep with 283 chevy.Runs good. Lights work,Spotlights work. Very tight drivetrain,still needs mastercylinder. 208 686 1593 208 819 4401”

http://spokane.craigslist.org/cto/1844066032.html

 
To Top

1951 M-38 MIlford, IA *SOLD** Includes Trailer

• CATEGORIES: M-38, trailer • TAGS: .

UPDATE: **SOLD** Was $2500

If all that is wrong is the fuel pump, then this might be a great deal.

“1951 Willy M-38 Type K Style Jeep and M100 Trailer. This Jeep has ran in the last two years but needs fuel pump replace. Flat Head 4 Willy motor. Would like to sell together. More Pics upon request. $2500 OBO.”

 
To Top

1948 CJ-2A Sagola, MI **SOLD**

• CATEGORIES: CJ-2A • TAGS: .

UPDATE: **SOLD** Was $7500.

I wonder if there are any pics of this used in the brewery. And, I wonder what they did with it.

“Great condition. Only 20,000 miles.  With unique Wilys snowplow. Runs and drives great. Very original. Was used inside of a brewery. Always stored inside.”

 

 
To Top

1947 CJ-2A Orrtanna, Pa $600

• CATEGORIES: CJ-2A • TAGS: .

The seller seems pretty accurate with this one.

“1947 Willy’s Jeep CJ2A It is running. But not driveable! needs work! No title. Asking $600 OBO. E-mail or call 717-515-1991 with any questions. Can send more picture also!”

http://harrisburg.craigslist.org/cto/1844380350.html

 
To Top

1953 CJ-3B Yucaipa, CA **SOLD**

• CATEGORIES: CJ-3B

UPDATE: **SOLD** Was $3400

(06/30/2010) There’s been some body work done to this jeep.  For example, it appears there is diamond plating around the gas inlet.

“UP FOR AUCTION, 1953  CJ 3B Willys Jeep, runs good, stock overhead cam 4 cyl, original motor. New soft top, new windshield, lift kit with oversized tires. All gauges work, automatic windhield wipers, new fuel tank.Body straight paint is nice, no rust. Have door for it but they do not match the paint.”

 
To Top

1959 CJ-3B Hollister, CA **SOLD**

• CATEGORIES: CJ-3B • TAGS: , .

UPDATE: **SOLD** Was $2895

“This is a 1959 Willys CJ3B. I don’t know the history it was a trade for some work. The jeep belongs to a friend of mine this is all he knows about this vehicle. The previous owner purchased the jeep in 1968 and had the body work done and the engine rebuilt at some time. The jeep runs fine and everything works! 4 wheel drive hi and low. I have not checked out the wench to see if it works but will check it out and update you as to my findings. The jeep is located in Hollister CA and needs to be picked up or driven home from here.”

 
To Top

Wanted: CJ-2A project in the Va, De, MD area

• CATEGORIES: wanted

Alex is looking for a CJ2A to rebuild and restore. He’d like it to be running, be around MD PA VA DE area, and in need of a restoration and some TLC.  Contact Alex  at atzomides@yahoo.com.

 
To Top

1948 Wagon Toledo, Oh $7000

• CATEGORIES: Jeep Rods, Willys Wagons • TAGS: .

This is a great looking Wagon … but who actually appraises vehicles and why don’t the know what they are doing? I mean, it  appraised at $19,000?  That is nuts.

“1948 Willys Town Delivery SBC-350 turbo 8 ¾ crystler 355 gears power disk brakes. $12,000 invested, $19,000 appraised,
$7,000 asking price.”

http://toledo.craigslist.org/cto/1837053118.html

 
To Top

1956 Truck Colville, WA **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE:  **SOLD** Was $2500

(05/03/2010) Dan spotted this solid looking truck.

“56 willys pick up. 350 chevy small block v8 runs perfect, four wheel drive. nice interior, bucket seats. four speed tranny plus overdrive. rear end makes some noise.”

 
To Top

1947 CJ-2A Eureka, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE: **SOLD** Was $9000

(11/19/2009) Looks good.  It’s built.

“Custom built jeep. Tons of work done; ARB air lockers, ARB heavy duty air compressor, full custom roll cage, 33×12.5 super swampers, weld bead lock rims, custom dash, much more work done. Must see to appreciate.

1947_cj2a_eureka

 
To Top

1945 MB Wallace, Mi **SOLD**

• CATEGORIES: MB • TAGS: .

UPDATE: **SOLD** Was $1600.

This is riding pretty low in the rear.  The flags are a nice touch; probably raised the value another $100.

“1945 MB project. runs and drives- no brakes. has a clear MI title. has MB frame tag and MB stamped motor. i probably can’t answer all of your ?’s- the best thing would be for you to come and see it for yourself. i have done some work to it, but it has a long way to go. i have a spare cj2a tub that has a decent back half that i will include, and a spare radiator.”

 
To Top

1957 CJ-5 Sublimity, OR **SOLD**

• CATEGORIES: CJ5 • TAGS: , .

UPDATE: **SOLD** Was $3200

This looks in good condition.  It’s got a few dings that add some character.

“1957 Willys CJ-5, Bone Stock F Head 4 Cylinder, Don’t Smoke, Don’t Use Oil, Don’t Leak, Runs So Quiet you can’t hear it running, Has a Warn Overdrive and Warn Hubs, Runs and Drives Great, Steers and Stops Straight. Four Wheel Drive Works as it Should. Up-dated Seats, Minor rust in passenger side floor. $3200.00,”

 
To Top

1943 MB Chetopa, Ks $1750

• CATEGORIES: MB

UPDATE:  This was sold, but the buyer didn’t show.  So, it is back on the market.

(05/01/2010) This MB has a few other parts added.

“1943 Willys jeep 4 cylinder original motor that runs. call- 620-820-4176”

http://joplin.craigslist.org/cto/1843712403.html

 
To Top

Year? M-38A1 Woodbury, Ga $2500

• CATEGORIES: M-38A1

The seller calls this the military version of the CJ-3B …. naw, I don’t think so.

“This is the military version of the jeep cj-3b. body is in ok shape and it doesnt run but will with a little work. has a pto working 4wd and low/high range.”

http://atlanta.craigslist.org/atl/cto/1843021521.html

 
To Top

1944 MB Oregon House, Ca **SOLD**

• CATEGORIES: MB • TAGS: .

UPDATE: **SOLD** Was $3200

“U FINISH IT! THIS WWII WILLYS RUNS GOOD – STOPS WELL – 4X4 WORKS HAS WARN HUBS – POSTWAR FLATHEAD ENGINE – CORRECT TRANSMISSION / TRANSFERCASE – FRAME AND CHASSIS ARE VERY CLEAN – NEW BRAKE LINES , HOSES, BRAKES HAVE BEEN BLED AND REPAIRED – 2 COMBAT RIMS – BODY IS USABLE AS IS, RESTORABLE / REPAIRABLE , TYPICAL JEEP RUST IN THE HAT CHANNELS AND AXE AND SHOVEL AREA ETC. – DATA PLATES ON GLOVE BOX AND FRAME. THIS WILLYS JEEP IS PERFECT TO GO TO SWAP MEETS AND ORDER PARTS FROM RON. NEEDS: FUEL / ELECTRICAL TO DRIVE DAILY  COMES WITH TITLE AND REGISTRATION / PLATES BUT THANKS TO FURLOUGH FRIDAYS THEY ARE DELAYED”

 

 
To Top

1963 CJ-5 Spotswood, Nj $1000

• CATEGORIES: CJ5 • TAGS: .

UPDATE:  Price dropped to $1000

(03/10/2010) This doesn’t look too bad.  Maybe it wouldn’t take much to run?

“1963 Willys Ran a year ago,very restoreable,comes wuth extra drive train,extra core motor,hard top with sliding doors,extra stock wheels,tow bar,lots of misc.parts. Email with phone # if truely interested.”

http://cnj.craigslist.org/cto/1842002127.html

 
To Top

Biscuit’s Back Seat Project

• CATEGORIES: Biscuit

With the kids coming up to visit, I wanted to add a backseat that would allow more than two people to go jeeping.  My goal was to combine the seat with a new tire carrier and have the entire unit easily installed and removed.  This current setup doesn’t allow for a tail gate; however, I don’t care about that right now.  In fact, I could create a back that is permanent with this unit at some later time if I wanted a tailgate.

So, here are some pics of the process:

I started with a couple brackets that bolted to each side of the rear portion of the roll cage that were connected by a heavy piece of angle iron (I have lots of heavy angle iron).

Next I bent a loop from some roll bar tube and then welded it to the angle iron (you can see that I needed to trim a bit from the bottom of the loop).  Then, I added a left and right arm that I attached to half-tubes which I clamped to the roll bar.  The loop leans backwards at the same angle as the front loop angle leans backwards.

The next step was to add an attachment for the rear tire carrier.  I welded a piece of tubing to the top of the loop and a bent piece of tubing to the angle iron.  In between, I welded a piece of rectangular tubing.

Then, I added a platform for the bottom of the seat.

After creating a template for the plate that will hold the spare tire, I cutout a piece of heavy metal, drilled three holes, inserted the studs, and welded them in place.  Then, I welded the plate onto the until.  Here, Karson is doing some spray painting.

Next, I added a strip of metal across the back loop so I could bolt on the back of the seat (made from wood).  The bottom is also wood and bolts in place.  Both still need to be padded.  The final pics below show the entire unit in place (though I have since painted the wood black and the strip across the back the color of the tubing).  This is nothing fancy and, though not as wide as I’d like, will meet my needs for now. And, we tested it out today and the kids love riding back there 🙂

 
To Top

1965 CJ-6 Luxemburg, Wi **SOLD**

• CATEGORIES: CJ-6

UPDATE:  This has already sold (was listed for $1100)

This seller meant to buy a CJ-5, but bought this by mistake (if I understand the ad correctly).

“1965 CJ6 F-134 Engine, 12-VOLT, T90 Transmission and Dana Transfer Case. This was just recently listed as a cj5. It is not, its a long frame. Below is what the last guy listed in his ad. I got it home and found out it was a long frame, I want a short one. I bought it and towed it home. It tows great with a 1/7/8 ball.

This jeep is being offered as a whole or for parts. This thing has cost me more money that I have the nerve to state.
It, for the 2nd time has stopped running. I have had the motor rebuilt twice. It is cursed and I want it gone! It has a brand new rebuild on the transmission, new rebuilt radiator, New Carter YF carberator. The body is rough. It took me 6mos. to find a 6volt starter as the lame mechanic in oshkosh that I first took it too, happened to misplace it (stole). I could take it to rawhide and write it off for $500 which I will do should I not piece it out. I have to get rid of this thing. It has cursed me for the last 4yrs. I could take it to the mechanic and have it rebuilt again, but I am so over it. Do have wisconsin title.

Call brian at 920-255-5596 if you want it. Lets deal, or if you know of a cj5 please let me know. I do not email or respond to them just call.”

http://greenbay.craigslist.org/cto/1840196276.html

 
To Top

1948 Rock Crawler Flattie Sun Prairie, WI **SOLD**

• CATEGORIES: CJ-3A • TAGS: .

UPDATE: **SOLD** Was $7800

It looks like there has been extensive work done.

“1948 Rock crawler, 350 chevy engine, Dana 44 axles, Detroit lockers, 39.5×15.50-15 swampers on 10×15 American Racing Beadlocks. 15 gallon fuel cell, 4 wheel coil springs, Rancho RS 5000 shocks, Must see to really get the feel! $7800”

 
To Top

1950 Jeepster Redwood City, Ca $5000

• CATEGORIES: Jeepster • TAGS: .

UPDATE:  **SOLD** Was $5000

(06/01/2010) This needs some work.

“For Sale is a complete 1950 Willys Overland Jeepster Convertible in restorable condition.
I have just completed a duplicate and the results are very impressive. Fun car to drive and turns a lot of heads. Newly rebuilt F-134 4 cylinder engine with 3 speed transmission. Engine is very strong and transmission is in good condition. Some rust in floor boards and rocker panels which are easily found online. All parts available to fully restore. Good tires, brakes stop but will need to be replaced. Includes convertible top and side curtains. Paint is passable but you will probably re-paint to complete this excellent project car. Too many projects and too little time. First $5,000 cash take it”

 
To Top

‘1948’ CJ-3A Black Hawk, SD eBay

• CATEGORIES: CJ-3A

This is a custom build.

“If you like jeeps and off roading heres the one for you.  Significant amount of work done but enough left to make it your own. Custom built 3A Willy flat fender, no tail gate, solid back.  Late model frame. Totally redone, restored from frame up (1948) Title.  350 Chevy rebuilt (less than 1,000 miles on rebuilt engine) with a 350 Hydro-Transmission. Edelbrock carburetor. Detroit Locker Rearend, ’44 rearend, full floating axles.  Power-Lock front end with 427 gears.  11″ brakes, 15″ Wheels with 1250/33 tires, Rancho shocks, and Rancho 2″ suspension.  Rear gas tank, power steering with tilt wheel, roll-cage and professionally wired. Bucket seats with rear seat.  Original windshield. This Jeep has been in storage for several years after rebuild.  Purchase as is; email with any questions prior to end of auction.  Deposit of $250.00 at close of auction with balance due within 5 days. Transportation is buyers responsibility.”

View all the pics on eBay

 
To Top

1942 Slat Grille MB Cloverdale, CA **SOLD**

• CATEGORIES: MB • TAGS: , , .

UPDATE: **SOLD** Was on eBay.

Nice Slattie!

“1942 Willy’s MB slat grill #109964.  DOD is:  1-8-42.  A 3-year frame off restoration was completed in June 2007.  This slat grill is used mostly for veteran related events, parades and car shows.  This is a popular and a favorite vehicle at shows and has won several awards.  It has been driven less than 1000 miles total.  I drive the jeep at least once every 2-3 weeks and keep it in good working condition.

The original tub was not useable but much care was taken to detail to make the new one as accurate as possible.  The slat has many of the original parts such as: brass data plates, frame, grill, split seam front seats, original back seat, steering wheel, column and steering box, short bodied distributor, “steel” marked pintal, “tiger eye” lenses, solid disc wheels, light assemblies, square shouldered footman loops, brake and clutch pedals, filterette, extinguisher and brackets, many TR20/EC/A/AA bolts and the list goes on ….”

 
To Top

1948 Jeepster Grove City, Oh **SOLD**

• CATEGORIES: Jeepster

UPDATE: **SOLD** Was $2000

This is a project.

“1948 Willys Overland Jeepster.Was in process of restoration.All parts that were removed appear to still be with car, seats, bumpers, etc. More pictures available via email.”

 
To Top

1946? CJ-2A? Wyoming, MN **SOLD**

• CATEGORIES: CJ-2A, MB

UPDATE: **SOLD** Was $500.

The solid back suggests a MB.  I can’t tell much more.

“The Jeep is a 1946 Willys Military Communications 4 wheel drive. Needs work. Asking $500.00.”