To Top

1952 M-38 Powell Butte, Or Status Unknown

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was listed at $3600.

The number on the side suggests this might have been raced or entered in PNW events at some point.  The windshield sort of looks CJ-3Bish, but the tubing arms looking CJ-2Aish to me.

“For Sale 1952 Willys M38 Jeep.   This jeep has spent most of it’s life as an airport/fire and maintence vehicle.   It is rust free and straight! Has a four cylinder flat head jeep engine that smokes slightly.  Also comes with a spare engine (cracked block) that has a lot of good parts.  Has a fully enclosed canvas top.   This would make a great starter jeep for someone looking to restore a military jeep back to it’s original condition.  Cash money only, no trades!”

 
To Top

1951 M-38 Houston, Mn $2000

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

No pics provided.

“Modified with V6 buick motor, springs mounted on top of axles, tow bar, newer top and doors, some older parts saved.  Has not run for a couple years”

http://lacrosse.craigslist.org/clt/2933114322.html

 

 
To Top

1946 CJ-2A Wallingford, CT **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $7000

(09/05/2011) This appears to have a replacement body.

“Willys CJ2a Registered as a 1946 with many new parts and some upgrades. Runs great, extra parts.”

 

 
To Top

1949 CJ-3A Nevada City, Ca $600

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“A project that I will not get to anytime soon. This jeep needs a lot of work. Looks like the drivetrain and engine was taken from a 1968-1971 CJ5. Has a Buick 225 V6, Single stick Dana 18 transfer case, and T-14 transmission.”

http://sacramento.craigslist.org/cto/2933079265.html

 
To Top

1941? Parts Columbus, NM $500

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Probably not from 1941, but you never know. No pics provided.

“41 Willy jeep parts fro t and rear axles and transfer case with shifters if interested call 575 915 five three six one.”

http://lascruces.en.craigslist.org/pts/2920044538.html

 
To Top

Happy April Fools Day!

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

I’m not sure if this is an April Fool’s picture or just some fool posing with a purse.  I’d like to claim alcohol was involved, but, sadly, nope, that’s just me with Ann’s purse trying to make her laugh.  I should have checked to make sure her camera was still in the bag.  Behind me is Bernie’s Custom FC with some beautiful custom work, which I will share later.  We are just about packed to start our journey northward.

 
To Top

1954 and 1955 CJ-3B Lake Chelan, WA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Were $2500/each

(12/13/2011) These are projects.

“I am selling my 1954 and 1955 Willys High hood jeeps. One has a good motor but the body is rough, and the other has a nicer body but the motor locked up. The one that runs has $1000.00 worth of wheels and tires on it and has only been driven af ew times. I also have new diamond plate rear quarter panels. I am asking $2500.00 each without the tires or quarter panels, $800.00 for the tires and wheels or $5000.00 for everything. This was going to be a project for my son and I, but tough times require a sale. Serious inquiries only please. Please Call with any questions as I dont check my email very often.”

 
To Top

1943 GPW Twisp, Wa **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was Parting Out

(01/10/2012) It’s project with lots of mods.

“This is currently a rolling chassis. i am now parting it out. project with title. Its a 1943 Ford GPW which was the military version built by Ford during WWII. heres the list: Dana 60 front with high steer arms, 14 bolt rear (both 4.10 gears and both stock width, if they were cut i’d b askin more)$1200, 94 lt1 multiport fuel injected 350(from a buick roadmaster-caprice)$800, have brand new still in box Painless Wiring harness for both engine$450(w-computer and chip) and jeep$500 and a new computer with the V.A.T.S. bypass module also from Painless, sm420 (7.02 to 1 granny gear) adapted (Advanced Adaptors) to dana 20 with a Lakewood scattershield and 12″ clutch (new)$650, roll cage$200, wrangler 2″ lifted springs$150, Warrior Products wrangler 2″ shackle reverse$150, brand new summit racing buckets w-covers and brackets$200, tilt gm column$100, new 5 point racing harnesses$100, hydraulic clutch setup, cj5 radiator modified for chev v-8$150, twin electric fans with wiring$100, msd stand alone fuel pump (45psi for fuelie)$50, new Flowtech block hugger headers$100, new cj5 fuel tank with skidplate$150, and i’m sure theres more…. hate to see it go but i have no time anymore to finish. $3500 firm for all or Possible trade/part trade, car/truck of equal value, things that go bang, or.”

 
To Top

The FCs Hit Interstate-17

• CATEGORIES: FC150-FC170-M677, Features • TAGS: , This site contains affiliate links for which I may be compensated.

Just one update tonight as we are tired from a fun filled day at the FC Roundup.   As we were heading back to Jesse’s from dinner we took to the highway for a few miles.  Now, I never thought in my wildest dreams that I’d be heading down the Interstate in Phoenix at night in a FC Tour Jeep full of people, let alone traveling at over 60mph and passing other vehicles!  For Ann and I it was a perfect ending to a great weekend!  More pics and info tomorrow.

Here’s what it looks like at 56MPH in a Tour Jeep with Craig driving (we hit 63MPH at one point), his wife recording the speed and my better half taking a photo.  I don’t remember all those lights, but then I was looking out the side as we passed other vehicles.  Maybe we hit warp speed and I just wasn’t paying attention?  Jason reached 67MPH in his FC Tour Jeep, perhaps setting a new land speed record for Tour Jeeps!?!

 

 
To Top

Friday at the 2012 FC Roundup

• CATEGORIES: FC150-FC170-M677, Features • TAGS: , This site contains affiliate links for which I may be compensated.

Ann and I had a wonderful time at day 1 of the FC Roundup.  It was great to match faces with names of people I have corresponded with for years.   We spent the start of our visit with Glenn and Colin discussing some of the unusual history of Willys Overland they uncovered recently.

From Left to right is Colin, me and Glenn

As Glenn had to take off, we soon found ourselves on a quick tour of Phoenix in Jason’s FC Tour Jeep.  Our quick tour turned into a rollicking ride through Phoenix as its citizens tried to figure out what kind of vehicle was ferrying this crazy group of people.  Without hills or dales to wander, we stuck to city streets, waving at all the people who were waving back at us.   Canadian Dave was at the helm, navigating the roads of Phoenix like any true Canadian would do … very politely.  He didn’t cause a single person to flip us off.

Pretty soon we got thirsty, so we tried to hunt down a Sonic Burger.  Unsuccessful on our own, Jason had an opportunity to ask “Big Willy”, a guy next to us wearing a “Big Willy” shirt, if he knew where the closest Sonic Burger place was.  Big Willy responded with a point of his finger to our right.  Unsure if Big Willy was being accurate or just trying to get rid of us so he could continue driving in traffic, we followed his directions and found the cold drinks we sought.

After our cold drinks, instead of going back to Jesse’s house and the roundup, we soon found ourselves traveling to the airport to pick up Vance.  I jumped in to ride shotgun so I could provided directions to the airport; however, my phone’s GPS failed me in our hour of need.  Fortunately, Jason’s navigation came through and we found the airport.  Now, if you’ve never ridden an FC Tour Jeep through a set of airport terminals, I can highly suggest it.   People were smiling and waving … I’ve never seen so many happy people at the airport!!

Eventually, we made our way back to Jesse’s (after a bathroom stop at Valero).  After hanging out there for a little while, we all piled into FCs for a trip to dinner.  Ann and I jumped back into Jason’s FC.  This time, instead of Canadian Dave driving, Jason took the wheel and drove us over to a motel to pick up one more rider before heading to dinner.  As we innocently pulled up to the door of the motel, Jason honked the FC’s horn.  It just so happened at that moment a woman was walking forty feet or so in front of the FC.  The honk startled the woman.

Hearing that honk, the woman’s dog leapt forward, causing the woman to jerk forward too.  The woman thought the honk was for her, so she turned around and gave us the look of death.  Then, she gave us the one-fingered salute.  Yes, it took Jason only a few minutes of driving to have someone flip us off.  She might not have been very happy with us (she would flip us off a second time, too), but she made us laugh all the way to dinner.

More form the Round up tomorrow ….

 

 
To Top

1948 CJ-2A Portland, Or $2000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

The body interior is supposed to be rough, but I’ve seen much worse.

“LOOKING FOR SOMEONE SPECIFICALLY WANTING A 1948. IF YOU’RE JUST WANTING AN OLD FLAT-FENDER, YOU MIGHT AS WELL BUY A NEW BUCKET AND PUT IT ON A MORE MODERN DRIVETRAIN AND FRAME.
THIS JEEP HAS SUFFERED THROUGH ALL ITS YEARS IN THE OREGON RAIN AND USED MOSTLY FOR HUNTING AND SOME RANCH CHORES. THE FLOOR PANS ARE RUSTED THRU AND ANY PLACE THAT HELD WATER CONSISTANTLY.
IT IS FULLY 6V AND IT DID RUN WHEN I BOUGHT IT IN 08…….BUT IT DID NOT STOP! NO BRAKES WHAT-SO-EVER. PREVIOUS OWNER DROVE IT ALL OVER THE HILLS ON COMPRESSION ONLY.
THE WINDSHIELD DID NOT COME FROM THE FACTORY AS THE REST. ITS BEEN SWITCHED TO A ONE-PIECE WHICH IS STILL IN GOOD CONDITION.
THE RADIATOR IS A LITTLE DAMP AT THE BOTTOM BUT DOES NOT SEEM TO LEAK.
WHEELS ARE STOCK WITH OLD BIAS-PLY TIRES THAT STILL HOLD AIR.

I HAVE REMOVED EVERYTHING THAT IS BOLTED ON AND REMOVED THE DASH COMPONENTS AND STEERING WHEEL AND THE BODY IS READY TO LIFT OFF.
REASON FOR SELLING AS I HAVE TOO MANY PROJECTS AND I HAVE ANOTHER 48 THAT I NEED TO GET GOING ON. AGE IS CATCHING UP WITH ME.
HERE ARE COUPLE PIC’S OF ENGINE COMPARTMENT AND THE OUTSIDE. THE WHITE TOP IS NO LONGER WITH IT. THE PIC. OF ME IN IT IS WHEN I DROVE IT AROUND THE BLOCK THE DAY I BOUGHT IT. BODY DOESN’T LOOK LIKE ITS EVER BEEN DAMAGE FROM ANY COLLISION OR ROLL-OVER.”

http://portland.craigslist.org/wsc/ctd/2931751602.html

 
To Top

1949 CJ-2A West Richland, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5000.

“Off frame restored 1949 Willys CJ2A Jeep. Has tow bar and mechanical winch. Great parade vehicle. Runs great, all original engine and running gear. Painted Olive drab, to look like military version. New Tires and many new parts, seals etc.”

 
To Top

1948 CJ-2A Hollis Center, Me $1000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

There may be some value here.

“I purchased it off of Craigslist about a year ago for $2200. Being a poor college student I haven’t had the time or the money to put into completing it and now it looks like I’ll have to sell it.

It’s mostly a basketcase at this point. The frame is SUPER SOLID no holes and I got about halfway through POR15’ing it. The frame on it’s own just is just about worth what I’m asking.

The transmission is an original T90-A1 model and moves freely.

I think the engine is seized but I think it’s only a dip or a diesel bath away from turning. The block is from a GPW (think WW2 Willys). The Water pump is super rusted.

The carb is a solex type aftermarket single barrel. The oil filter is the standard paper canister kind. It has a 12v coil though I’m not sure if the gauges are 12v also (never got that far).

The Gas tank is in OK condition. There was only a very small pin hole and I used POR15 tank sealer to fix that about a year ago.

The body needs welding work. If you’re good with welding and have some scrap sheet metal it would make a good project. the floor (what always ends up going) is completely missing. There are no original seats.

The axles look solid and move freely. The drum brakes may need to be cleaned but I’ve been told by the PO that they are good.

The windshield folds nicely when installed. The glass is not correct and is something of a hack job sealed in. It would most likely work while driving.
It needs a new steering system. Some PO put a power steering system in and it has since completely gone.

What it has:

Complete hood, grille, lamps, pumps, carb, wheels, frame, brakes, tailgate, pretty much everything you see.
New radiator
most of the aftermarket soft top bow system.
ugly aftermarket roll bar
mild 2-3″ shackle lift with oversize tires.
12v ignition coil

I’m also including:
a front bumper from a wrangler as a replacement for the bent up one that came with it.
Chilton’s service manual for CJs.

Obviously, this isn’t drivable so it will need to be flat towed.  E-Mail me if you’re interested.”

http://maine.craigslist.org/pts/2930562826.html

 
To Top

1951 CJ-3A Spanaway, Wa $1500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“project jeep rolling frame,complete except seats,original 4cyl also 4cyl out of 43 willys both ran when removed
,full rollcage,new top,new 2in springs & shocks 11 in brakes for front
stock wheels& tires plus alum rims
25three 3one8-27six1 between 10:00am &7:00pm if no answer leave voicemail thankyou!”

http://seattle.craigslist.org/tac/cto/2930643263.html

 
To Top

1948 CJ-2A Caldwell, ID **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

This looks solid, though the little paint spray spots suggest patches or sanding or possible rust.

“1948 Willy’s Jeep CJ 2A.

Runs good and is licensed for legal street use.

Willing to bring to Pendleton (my hometown) for a serious buyer.”

 
To Top

1959 & 1960 Wagon Conifer, CO **SOLD**

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200

“1960 wagon with V8 conversion, runs strong. Needs interior, has body rust. 1959 wagon, all original, good body and interior. Hydraulic snow plow pump and hoses on engine. 59 has title, 60 notorized bill of sale. Extra parts included. Price is for both.”

 
To Top

1951 CJ-3A Granite Bay, CA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3250.

Either this has had some side damage or it’s a strange optical illusion.

“1951 FLATFENDER 289 V8 FORD, 3 SPEED, FRONT AND REAR SEATS, GREAT SHAPE, SEND CONTACT INFO IF SERIOUS”

 
To Top

1946 VEC? CJ-2A Buckley, Wa $1800

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPdATE:  Still Available

(03/06/2012) I can’t tell if this has tool indents or not.

“very early CJ2 with 3 spd on the column
has approx 26,000 original miles
very little rust but lots of body damage
engine runs excellent, running gear functions nicely, brakes work
comes with an extra tub that’s in nice condition and some patch panels and tons of extra parts
I have the title
call Dave Smith at 253 380 5517”

http://seattle.craigslist.org/tac/for/2917323842.html

 
To Top

Creation of a Nuffield Gutty Airborne Jeep in Australia

• CATEGORIES: Airborne Lightweight Jeeps, Features, Unusual • TAGS: This site contains affiliate links for which I may be compensated.

I ran across a story on G503 about the creation of a Nuffield Airborne Jeep in Australia.  The details of the build are great!

Link to g503 story: http://www.g503.com/forums/viewtopic.php?f=4&t=188540

You can view another Nuffield Gutty on my post about lightweight jeeps.

 
To Top

Welcome R&P 4WD

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

R&P4WD has now joined as a sponsor, so many thanks to them!

They’ve been in the Jeep business since 1989,  the core of what they do consists of 11″ drum brake parts and  conversion kits, Front and rear bolt on disc brake conversions, and custom built jeep axles front and rear (wide track, narrow track, WIllys truck/wagon Dana 44’s and 60’s in high or low pinion) Full floating axle conversions, (Warn spent alot of time in their shop working the bugs out of Warn’s full float kits), high steer components  (knuckles, arms ect), HD DOM tie rods and drag links,  t18 conversions (to GM, buick, and AMC).

You can locate them on Facebook at https://www.facebook.com/#!/RP4WD or visit their website at http://www.r-p4wd.com.

 
To Top

1946 CJ-2A Zenda, Ks $1200

• CATEGORIES: CJ-2A, Unusual • TAGS: This site contains affiliate links for which I may be compensated.

Someone had some left over cans of paint from Fourth of July?  Joking aside, there might just be some value here.  I suspect the sides have been filled or bondoed as the drain holes appear missing on the driver’s side.

“1946 Willies Jeep this jeep does not run $1200 firm 620-243-3961 also have many extra parts.”

 
To Top

1948 CJ-2A Saginaw, Mi $6000

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

This is a nice looking restoration (though not perfectly stock) for the price.

“1948 Willys CJ2A rebuilt motor,new tires,new top & 12 volt wiring. Body & frame were stripped to bare metal and re-painted. Extra transmission,transfercae & RUNNING engine. complete new exhaust 6000.00 OBO or trade & cash calls only will not answer e-mails 98nine 753-7888”

http://detroit.craigslist.org/okl/cto/2929855067.html

 
To Top

3 FCs East Bethel, Mn $4000

• CATEGORIES: FC150-FC170-M677 • TAGS: , This site contains affiliate links for which I may be compensated.

The seller has one nice FC-170 and two parts FC-150s (no photos provided).

“3 Jeeps: 1960 Jeep FC-170 44k miles, flat head 6 cyl, 3 spd trans, dealer installed Jay-Hawk electric/hydraulic dump and Western plow, licensed, box is rough, cab corners are rusted through, drives nice. Comes with 2 parts FC-150’s: a narrow track and wide track. Lots of parts. 7six3-4three4-4589 Craig
$4000 for everything”

http://minneapolis.craigslist.org/ank/cto/2922966624.html

 
To Top

1957 FC-150 Concord, NC **SOLD**

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

This looks rough.

“4 cyl motor doesn’t run but it does turn by hand freely, trans, transfer case and rear end are all original. Front axle has been changed to a 2wd straight axle. The motor, transmission, transfer case, and axles are all still bolted in. Glass is not intact, I have all of the glass except for the rear flat pieces. I do have the doors. Truck has been sandblasted, it does have rust. I currently do not have a title, but should have within the next week. I bought this with the intent of restoring it, but I have too many projects and not enough time.

These trucks were produced from 1956-64, only about 30k were made.”

 
To Top

1964 FC-170 Henderson, TN **SOLD**

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

This looks a bit rough, but has a modified dump bed.

“’64 snub nose Jeep pick up truck with modified dump bed. This truck is a classic work horse, 225 F-head original engine (it runs!) 4 wheel drive. Snowplow lift on the front end. All deals CASH only !”