To Top

1962 Wagon Emmett, Id $1600

• CATEGORIES: Willys Wagons • TAGS: .

UPDATE:  Still Available

(09/05/2011) This runs, but needs a battery and a gas tank.

“I have a 1962 Willys Wagon Overland. This Wagon Runs. It does not have a battery and I currently have the fuel tank off. I have extra parts including the origional tailgate and rear window. I got this rig to be a project of mine. I just don’t have the time to work on it. I am asking $1,600 Call Matt @ 369 One Four Two Three”

To Top

1947 CJ-2A Larkspur, Co **SOLD**


UPDATE:**SOLD** Was $6000

(12/26/2008) From the parts list and description, there’s been a great deal of work and money invested in this jeep.  This nice looking CJ-2A sports a fiberglass body, tub and fenders.  My only concern about this jeep is the way the rollcage appears to connect to the back wheel wells rather than connecting directly to the frame, as should be done with a fiberglass body.

“Built 377Ci Chevy Small Block w/Edelbrock manifold and Carb Mallory unilite distributor, coil and fuel pump, Doug Thorley Headers, SM465 Chevy 4 speed tranny with centerforce clutch & t18 dual stick tcase with the Warn Overdrive, Narrow track Dana 44 front and rear with the full float axle conversion all around for flat towing it, One Piece shafts in the rear, Disc brakes in the front, Chevy Power Steering ….”

To Top

1950 Jeepster Meridian, ID **SOLD**

• CATEGORIES: Jeepster • TAGS: .

UPDATE: **SOLD* Was $5000

(09/17/2011) This appears in good shape.

“1950 Willys Jeepster, Clear Idaho Title, 161 F-head, 90HP Hurricane 6 cylinder engine, Runs good. 6 volt system with new battery. Original radio and heater. One of the 19,000 ever built. Needs new convertible top but framework is in good condition. Body is sound and straight but does have a few dents. It is a drivable project that you can enjoy while tinkering or go all out and do a frame off. ”

To Top

1946 CJ-2A Battle Creek, Mi **SOLD**


UPDATE:**SOLD** Was $2000

(08/20/2011) This looks pretty rough.

“This is a project I wanted to play with but havent had the time.”

To Top

1947 CJ-2A Roswell, NM $650

• CATEGORIES: CJ-2A, Last Ride

UPDATE:  Price bumped to $650.

(09/01/2011) I believe this jeep might have cushioned the fall of a UFO.

“Here I have parts to a early Willys Jeep. There are 2 engines, 1 transmission and transfer case, 4 axels, 6 tires and wheels. Body and frame. Tired of looking at it, must go. Questions? Call 5756260199, Ask for Bill.”

To Top

Updates Sat AM


Updates Sat AM

To Top

A Flattie at Crazy Horse Memorial

• CATEGORIES: Artists/Drawings, Features

Today’s journey took us in and out of the Black Hills and, as I write this, we are cruising towards Billings.  The first stop today was the Starbucks in Rapid City, SD, where we managed to cause problems.  Somehow, Ann and I got too busy talking and managed to drive right by the order box.  When we got to the window and explained that we missed the box, the servers quickly began jumped into action.  Mayhem and disaster followed as car after car backed up in the ordinarily slow-paced town, while the servers attempted to stick our order in between the finished orders of others.  By the time we drove away and saw the line of cars behind us, we knew we would never be welcomed back.  I’m sure the servers were muttering ‘damn tourists’ as we drove away ….

Our next stop was Mt. Rushmore.  This was very cool to see in person, more majestic than pictures make it.  I guess the Park Service has also embraced the majesty, by charging a kingly price for parking of $11.00.  Using some stealth techniques, we snapped some pictures and left for our next destination, the Crazy Horse Memorial.

The Crazy Horse Memorial costs $10 per person to enter, but for the money there is plenty in the visitor’s center to see.  After touring the building,  I spotted a flat fender in a painting by Jake Eggars hanging on one of the walls.  I thought that was a bit strange, the color and look of the jeep (the color and bumper both unusual) that I wondered if it was drawn from a real jeep.  So, when I got back to my computer, I started doing some searches.  I finally discovered the below pics of the jeep taken in April of this year.  No place is too remote for me NOT to find a jeep 🙂


To Top

1949 CJ-3A Staford Springs, Ct $300


This has been disassembled.

“1949, Willys 3A,`for parts. No Engine or transmission, Dissasembled, good frame, clear Ohio Title, Issued .6/20/1980. New ID plate,and old one. pic is before it was dsasembled. Body is in poor condition, has cab with doors.”

To Top

1948 CJ-2A Medford, OR **SOLD**


UPDATE: Was $4500. **SOLD**

This has many updates.

“1948 Willys Jeep with lots of extras;
Small block Chevy 350
SM420 Transmission
Dana 300 Transfer Case
1980 Toyota Front and Rear Axles
High Crossover Steering
Power Steering
Power Brakes
Custom 4-link Rear Suspension
Custom Bumpers
Ramsey 8000 Lbs Winch
Custom Rollcage
Custom Top
35×15 Superswamper Boggers”

To Top

Wanted: Parts in Central Iowa

• CATEGORIES: wanted

“Looking for parts jeep or parts from early Willys Jeep. Grandson & I have been working on a couple old flat fendered projects and we are needing help.
Looking for jeep top parts, canvas top, frame/bows, full enclosure, doors for top etc…

Not looking to buy restored jeep, Just needing parts to keep a couple of guys busy
So if you have a single part, box of parts or parts jeep your wanting to get rid of $. Please call.

THANKS for any help finding parts to keep hobby moving. . 515.664.1076”

To Top

1946 CJ-2A Huron, Oh $1100


This seller also has parts for sale (see below post).

“runs but the trans is out and needs to be put back in. Sell all or part. Have other parts too. 419-602-3343.”

To Top

1946 CJ-2A Indianapolis, In $2900


Needs brake help.

“1946 Willys CJ2A for sale. Runs good and in driveable condition. Needs minor brake work. Please call (317)442-3008 monday thru friday after 5:00PM.”

To Top

1948 CJ-2A Westhampton, Ma **SOLD**

• CATEGORIES: CJ-2A, Unusual

UPDATE: **SOLD** Was $600.

How can you not just love this poor thing?  Plowing sure would be cold!

“I believe this Willys jeep is a 1948. Not roadworthy. I have owned it for 33 years and used it to haul wood on my property and plow my driveway. Starts and runs. Plow is mounted and works. Not a 4 way plow. 6 volt system. Good vehicle for plowing your driveway. Needs a seat..”

To Top

1952 CJ-3A Grafton, NH **SOLD**


UPDATE: **SOLD** Was No Price.

The body is supposed to be in very good shape.

“Frame: original and solid, no rot.
Body: original and rough, correct WILLYS logos on fenders, tailgate and windshield.
Suspension: newer leaves lift the jeep 4 inches, no shocks on front currently.
Steering: original and sloppy, should be upgraded.
Engine: 1981 Buick Regal 3.8/231 even fire V6. good motor, could use a new carb.
Trans/ Transfer case: original from 1952. work great.

8000lb winch on front bumper
35″ tires on 10″ rims with ok tread
Roll bar
Bikini(?) top
New radiator”

To Top

Year? DJ-3A? Holland, Tx **SOLD**


UPDATE:  Was listed at $400. **SOLD**

No pics provided.

“Old willys 2wd (dj-surrey?). Originally purchased for the motor but no longer need. Flat four engine turns over but compresion now low (valve seating?). Tight steering, smooth trans and rear, recored rad., new master cyl., hoses and belts, added one wire gm alt., straight body with alot of rust and trashed seats. Some good parts if someone needs. $400 for all. “

To Top

CJ-8, ’63 Wagon, Other Stuff Middleton, Id

• CATEGORIES: Other 4x4s, Parts, Willys Wagons

This seller has a variety of items.

“I have some projects that I know now that I will probably never get to. I am really trying to simplify my life and wanna move some stuff.

’81 CJ8 Scrambler
4.2, swapped in T18 and Dana 20 t/c
Stock height and axles. Has aluminum rims and BFG A/T in 235/15’s
Has 1/2 cab but, no doors or rear window.
Needs driveshafts installed. Probably will need a rear one lengthened.
Runs but, needs work.
$2500 firm…ns_photos/CJ8/

’63 Willys Wagon
50k original miles on the body. Has a Chevy Nova front clip graft and frame has been aligned at a frame shop. Chevy Nova 10 bolt rear axle.
Low mile LT1/4L60E 2wd setup goes with it but, not installed. I have extra sheet metal that I will let go with it also. Have a new front suspension rebuild kit and aftermarket wiring harness also.
$2500 firm…illys%20wagon/

Front and rear Dana 60’s
front is a Chevy kingpin axle. Dis-assembled. Housing has been sandblasted and primed. Has brand new SRW hubs and rotors.
rear is all stock and outt of a 70’s Dodge. They were gonna go in the Scrambler.

Miller 350 LX Tig welder.
Need I say more? This is a Cadillac among tig machines and is the upgraded water cooled setup.

Jeep Comanche bed and frame with fiberglas topper.
I was gonna make a sweet trailer to tow behind my XJ but, sold the XJ and so, really don’t need it. It does not yet have a tongue or hitch on it. Still has the Dna 35 under it but for full price I will throw in a trailer axle with 5 x 4.5 BP to match the Jeep.

To Top

1946 CJ-2A Tahlequah, Ok **SOLD**


UPDATE: **SOLD** Was $2750

“1946 Willys Jeep Cj2a. Rebuilt Motor, Good 4 wheel drive, Runs Great! All of the body work is done. New brakes, wheel cylinders, wheel bearings, roll cage, Brand new tires on 15 inch wheels $700 worth of tires and i also have original army wheels and tires. Also has Aftermarket seats, horn steering wheel etc… L134 motor w/ 3 speed trans. high and low gear, pto in and out , with warn lockers on front. Original VIN plate on firewall!!

NO Title! I have used this off highway only on the illinois river banks. Great for farm use and hunting. Original VIN ID is still on the engine firewall. I talked to DMV and a person could file for title for about $150 to get license plate. I have led taillights and many other parts still new in box that come with it.

$$Oh yeah i also Rhino lined the entire jeep inside and out if you were wondering! $$ It’s ready for deer season boys! IT WILL FIT ON A 16′ Flatbed or any trailer 6ft wide. $2750.00 NO TIRE KICKERS!”

To Top

1946 CJ-2A Spring, TX **SOLD**

• CATEGORIES: CJ-2A, Last Ride

UPDATE: **SOLD** Was $500

I don’t think there is much here.

“1946 Willys Jeep located in the Spring/Woodlands area. Perfect for a restore, or throw a motor and seats in for a Dear lease. Has some rust, no drive train. $ price you’ll find.”

To Top

Ramsey PTO Portland, Or $225


“Jeep pto Ramsey model STC-2 . very good shape $225 OBO”

To Top

1947 CJ-2A Rawlins, WY **SOLD**


UPDATE: **SOLD** Was $3500.

If you can’t trust the blue book value, what can you trust, right?


To Top

1943 GPW Project Oregon House, CA **SOLD**


UPDATE: **SOLD** Was $1500.

Parts or project.



To Top

1953 CJ-3A Palo Alto, Ca $2500


UPDATE:  Price dropped to $2500

(04/01/2011) This has an OD.  It also has a popup of some kind on the front of the hood.  This might be a good deal.

“1953 Jeep CJ3-A with overdrive. $2500 650-485-2587”

To Top

1946 CJ-2A Converse, Tx **SOLD**


UPDATE: **SOLD** Was $3500

(10/14/2011) This appears to have all three data plates.

“Hunters Special—excellent working condition. Great vehicle for the deer lease or ranch
$3500 OBO”


To Top

1957 FC-150 Minneapolis, Mn $1500

• CATEGORIES: FC150-FC170-M677

UPDATE:  Pics provided. Price bumped to $1500.

(07/19/2011) “For Sale: Very, very rare FC-150 Pickup.

For Sale: 1957 Willys Jeep FC-150 Pickup Truck. (Forward Control)

In need of full restoration.
Have running F-head 4 cylinder motor to be installed by new owner.
Has usual rust issues of all FC’s.
Very Rare truck. Running gear and suspension all compatible with CJ-5.
Needs: rear springs and new exhaust.

Call 651-387-9526 for details. $1,500.00 firm.”

To Top

1947 CJ-2A Ridgecrest, CA **SOLD**


UPDATE: **SOLD** Was $2000

(10/24/2010) It looks like this is a bit hacked along the passenger side.  That engine is pretty dusty — I doubt it’s been started in a while.

“1947 willys cj2a for sale has flathead 4 cylinder engine and extra body peices $1800.00”