To Top

1950 Jeepster Mulberry, Fl **SOLD** Was $6500

• CATEGORIES: Jeepster • TAGS: , .

UPDATE: **SOLD** Was $6500.

Not a bad price.  Carbs are cheap and easy to replace!  That said, how exactly does one ‘crack’ a carb??? A block yes, but a carb?  Maybe it’s the intake manifold?

“Classic Willy’s Jeepster – good condition- was running great until we cracked carburetor – Must sell – $ 6,500.00 OBO Email if interested to see.”

 
To Top

1953ish Truck Kuna, Id $5000

• CATEGORIES: Willys Trucks

I thought the idea of this project was interesting.  It still needs some work.

“1953 willys overland custom. its on a dodge powerwagon chassis with a 318 and 727 transmission automatic. needs new tires, pait and interior, along with a master cylinder and passenger soft brake line”

http://orangecounty.craigslist.org/cto/1663516582.html

 
To Top

1946 Truck Blackfoot, ID **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE: **SOLD** Was Make Offer.

“complete truck,the hood is in the bed.engine is seized.needs restored . Not title ,probably wouldnt be too hard to chase one down though looking for offers. NO offers of less than $500 cash or value will even be thought of. thanks.”

 
To Top

1959 CJ-3B Baltimore, Md **SOLD**

• CATEGORIES: CJ-3B

UPDATE:  **SOLD** Was $2200

(02/06/2010) This doesn’t seem like a bad price if the body is in reasonable shape.

“1959 cj3b solid frame ,good body,chevy smallblock new alt,carb,heads,T98 trans,spicer 18 t-case PTO ramsey winch,custom rear axle,detroit locker moser axles,softop and doors etc..thanks john”

 
To Top

1951 Truck Shingle Springs, CA **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE: **SOLD** Was $2900

It sounds like the seller wants this to go to a good home.

“Running all original truck. Current registration. Clear title. 4X4, 4 cylinder, lumber rack that slides into the stake pockets, painless wiring harness professionally installed (still 6 volt).

I shopped for a long time to find a truck as straight as this one. I was not looking to restore to original, I just wanted a straight body. When I finally found the body I wanted, it came with a complete running truck. I started gathering parts (engine, tranny, axles, etc.) to modernize it but felt guilty about messing with a complete truck. I recently found another one and this time it was already sitting on a different frame, new motor etc. So now I can sell this truck and I hope to someone with intentions of restoration. It is in good shape so not much is needed but I will list what I think it needs:
Paint job (I have been sanding when I have time)
tires have good tread and hold air but they are looking old
rear window was cracked so I removed it in anticipation of replacing it
some tie rod ends need replacing (vibrations when you get to 40 mph or so)
If you plan on driving on the highway an overdrive will be needed
It has an am radio but it doesn’t work (I started removing it so you will see it is loose in the picture)
It has a heater that looks like it came from something else but looks as old as the truck. It was not hooked up so I took it out and went through it. The fan works but I found a small leak in the heater core that should be easy to solder.
It has an old spot light.”

 
To Top

Overdrive, Transfercase, Tranny, Axles Georgia $750

• CATEGORIES: Parts

Kevin’s got a good price on this combination of parts.  You can email him at kroth936@yahoo.com to learn more.

“Tranny with overdrive and both axles….$750 for all of it…if someone only wants the overdrive it’s still $750….I hope someone needs this….also have a 4 cyl for $300”

 
To Top

1967 M725 Ambulance Collingswood, NJ **SOLD**

• CATEGORIES: Fire/Police/Industry Vehicles, Other 4x4s • TAGS: .

UPDATE: **SOLD** Was $995.

“I purchased this over 2 years ago with the intentions of restoring it. I have purchased many additional parts but have not had that much time to work on it. The boro had asked us to remove it from the property back in September due to one of our wonderful neighbors. We need to sell soon. I did get it to turn over. This is a great solid Jeep with very little rust for someone who has time to work on it. We had it posted in the Fall for $1750 but now brought the price down. The price is firm. I have posted many items on here with great success. We are looking to sell this quick. Not looking forward to selling it but in the future when I have more time I will look into purchasing another vehicle to restore. Need to be removed from our property by end of March. ”

 
To Top

1961 FC-170 San Rafael, Ca **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: .

UPDATE: **SOLD* Was on eBay.

Only a day left on this auction.  The motor has been pulled.

“1961 Willys Jeep FC170  3/4T P/U  4WD with 9 ft. bed. 43,162 mi.  California vehicle. Original metallic gold paint. Last registered 1974 . Very restorable. All original drivetrain (not installed ).  Orig. L6-226 Super Hurricane engine(not running). Spare motor (L6-226) with good compression included .Orig. 3 spd. T90A trans. with Spicer No.18 transfer case ( Has hvy dty 1-1/4″ intermediate shaft) . Original axles – Dana 44 front & 53 rear w/ factory optional limited slip POWR-LOK differentials. Includes owners, service and parts manuals. Typical rot at lower right rear of cab under battery compartment. Driver door needs alignment repair. Please email any questions. Title via Bill of Sale due to age of vehicle, CA DMV has purged records…..”

 
To Top

1947 CJ-2A Austin (Steiner Ranch), Tx $1200

• CATEGORIES: CJ-3A • TAGS: .

It’s unclear how much work this needs.

“PROJECT JEEP 1947 CJ2A. Brought back from deer lease and don’t have time for it. The hardtop is made by rawson-koenig. No glass in windshield. A couple of tires don’t hold air very long. 1200 obo Call Jay 512-848-5770 located in Steiner ranch”

http://austin.craigslist.org/cto/1663265069.html

 
To Top

1958 Wagon El Paso, NM **SOLD**

• CATEGORIES: Willys Wagons • TAGS: .

UPDATE: **SOLD** Was $1400

It runs and drives.  It looks like a great price.

“1958 Willys Great for a project. 6cyl runs, 3spd shifts, Bill of sale.”

 

 
To Top

1947 CJ-2A Avon, Ma $1000

• CATEGORIES: CJ-2A

This has an updated engine of some kind. The seller must sell.

“1947 Jeep Willy. Mileage unknown. Certificate of Title via The Commonwealth of Massachusetts available. Includes jeep, plow, doors and extras. Not currently running. Moving, must sell. Additional photos available upon request.”

http://hartford.craigslist.org/cto/1660586303.html

 
To Top

1951 M-38 Pearland, TX **SOLD**

• CATEGORIES: M-38 • TAGS: , .

UPDATE: **SOLD** Was eBay.

This is Norman.  Norman looks good!

“You are bidding on a 1951 M38 military jeep.  This jeep runs great and the body is in very good condition. There is a small rust spot on the passenger floor board, about the size of a quarter, I included it in the pictures.  The fuel gauge only works when the fuel level gets to 1/2 tank, then it reads accurate. The windshield is cracked due to my nephew sitting on it when I had it down.  The transmission, rear-end, and transfer case work flawlessly transitioning in and out of 4-wheel drive and high/low range.  The engine starts on first crank and always has. All fluid levels are up to date and get checked routinely. My uncle sold it to my brother and I purchased it from him 2 years ago.  I drive the jeep twice per week, once to take my son bird hunting, the other to his baseball game on Thursday nights (approx. 3 miles).  It is not street legal so I take it through the neighborhood by my house staying off of the highway. My wife’s car has been sitting out too long and she wants her spot back in the garage and my third garage door only measures 62 inches wide, not wide enough; that is the only reason I am selling it.  I tried to locate a title but was unable to do so, the process is simple to acquire a bonded title but cost approx. $150 depending on the value of the vehicle, I did not take this step due to the cost and the amount of time to get it back from the DOT, plus I never needed it to be street legal. The odometer reads 44, 304 miles, not sure if thats accurate.”

 
To Top

1949 CJ-2A Helena, Mt $5300

• CATEGORIES: CJ-2A • TAGS: , .

What’s the white “blob” under the dash plate?

Completely restored Willys Jeep CJ-2A 1949, 2 new seats will be installed $5300.00 406-475-3306″

http://montana.craigslist.org/ctd/1662437230.html

 
To Top

1943 GPW Tempe, Az $2800

• CATEGORIES: GPW (Ford MB)

UPDATE:  Price dropped to $2800

(06/14/09) Here’s an unusual GPW.

“TITLED AS 1943 FORD, GPW 4X4 (general purpose willys,built by ford). IT HAS A STUDEBAKER FLATHEAD 6 CYL. ENGINE AND A 3 SPEED STICK TRANSMISSION WITH OVERDRIVE. TRANSFER CASE HAS HI-LO RANGE AND IN & OUT LEVERS. THIS CAR RUNS GREAT!!! THE ALL METAL TOP IS REMOVABLE AS ARE THE DOORS. THE CAR WAS IN STORAGE FOR MANY YEARS IN THE CHRISTOPHER CREEK AREA OF ARIZONA. IT IS VIRTUALLY RUST FREE. A RARE FUN 4X4. CURRENTLY ON DISPLAY AT SO-CAL SPEED SHOP PHOENIX $3100.00 480-820-3770 ”

http://phoenix.craigslist.org/evl/cto/1662065423.html

 
To Top

1950 CJ-3A Austin, TX **SOLD**

• CATEGORIES: CJ-3A • TAGS: .

UPDATE: **SOLD** Was $2500.

(11/26/09) I love the starter switch wiring on this one; check out the pics.

“Great project. Recently purchased with high hopes but have realized I don’t have the time right now.”

 

1950_cj3a_austin3

1950_cj3a_austin2

1950_cj3a_austin

 
To Top

1946 CJ-2A Rescue, Ca $600

• CATEGORIES: CJ-2A

UPDATE:  More pics courtesy of Dexter

“For Sale, 1946 Willys Flat fender. This is a parts only vehicle. It does not have a title and in not licensed. Frame is cracked at front spring hanger. It has stock front and rear axle. Motor was converted to 283 Chevy and not running. Vehicle has been setting for several years. Body is in reasonable shape. If interested please call: Dale at 916-996-7581.”

http://sacramento.craigslist.org/pts/1658550171.html

 
To Top

1950s CJ-3A Yuma, AZ **SOLD**

• CATEGORIES: CJ-3A

UPDATE: Was $1500. **SOLD**

This looks like a project.

“I am interested in selling my 1950’s CJ3 Willys Jeep. It is fairly great shape for a 60 year old vehicle. Its been used for years as a farm truck here in AZ. It doesn’t run at the moment, bought it from my friend who said it needed the carburetor rebuilt and I haven’t got to that. motor spins freely (original 4 cyl) Has some rust in usual spots. the tool box under passenger seat is intact. Working tailgate. As far as i know it is all original. One rim is welded to hub so needs repair. This Jeep is in really great shape for its age and hard to find one not wasting away in a field. Wanted to make a hunting jeep/ toy out of it but no time.”

 
To Top

1946 CJ-2A Moreno Valley, CA **SOLD**

• CATEGORIES: CJ-2A

UPDATE: **SOLD** Was $2000

It needs some work.  this might have a cj-3b windshield.

“46 Willy’s Jeep with engine from 58 corvette and low gear ratio. Awesome rock climber!! Needs tranny work. New soft top, new brake parts, new axle parts, freshly rebuilt carb. Tranny is currently out of vehicle. $2000 or best offer”

 
To Top

1970 CJ-5 Grand Junction, CO **SOLD**

• CATEGORIES: CJ5 • TAGS: .

UPDATE:  **SOLD** Was $2900.

“Removable custom fiberglass hardtop, with removable full doors (very rare for this year of CJ5). Buick Dauntless 225 V6. Flanged Dana 44 rear axle. $2,900.00 obo. Clear title, cash only.”

 
To Top

Aluminum Arctic Top for sale Easton, Ct $600

• CATEGORIES: Body Parts

A reader spotted this top for sale.  The JEEP is not for sale!

“THIS IS AN ORIGINAL ALUMINUM MILITARY CAB CLOSURE FOR M38 WILLYS. IT IS SHOWN ON A CJ2A IN THIS PICTURE. THE CJ2A IS NOT SOLD WITH THE TOP. THIS IS THE ORIGINAL OLIVE DRAB GREEN PAINT. IT HAS A MISSING REAR WINDOW. ALL THE LATCHES AND SLIDING WINDOWS WORK LIKE THEY SHOULD. ANY QUESTIONS E-MAIL DEK4154@OPTONLINE.NET OR CALL 203-268-4547 BEFORE 8:00 P.M….ABSOLUTLY NO CALLS AFTER 8:00!!”

http://newhaven.craigslist.org/pts/1643496915.html

 
To Top

Year? MB Pomona, CA **SOLD**

• CATEGORIES: MB

UPDATE: Was on eBay. **SOLD**

“UNKNOW YEAR WILLYS JEEP. IT S A SOLID BODY AND FRAME. COMES WITH BOTH FRONT AND REAR AXLES/DIFFS. I WAS UNABLE TO FIND A VIN NUMBER OR MODEL. I THINK ITS A “CJ-2A” NOT SURE THO. IM NOT A COLLECTOR OF THESE TYPES OF VEHICLES. NO PAPERWORK BUT WILL PROVIDE A BILL OF SALE. IF YOU KNOW MORE INFO FEEL FREE TO MENTION. BID WITH CONFIDENCE. NO RESERVE!! SHIPPING AVAILABLE AS LONG AS BUYER IS RESPONSIBLE FOR A CHIPPING CHARGES. WHAT YOU SEE IS WHAT YOU GET. LOTS OF COOL PARTS. VERY RARE VEHICLE.”


 
To Top

1958 Truck Turlock, CA **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE:  **SOLD** Was $7700.

It’s a nice truck.  It sports an automatic and that is rare even among custom Willys trucks.

“Sell (or maybe trade for classic car, Harley, or labor to build an apartment or garage). We can work out the money up or down…this is a Daily driver or/and a great parade truck….All Chevy underneath…350 Chevy V-8, 700-R4 tranny, Camaro 10 bolt rear, 1956 Chevy front axle w/discs, very nice LOKAR brand shifter and Emergency brake set……eye catcher…….Patriotic theme……..must see to appreciate, $12,500 invested……”

 
To Top

1948? CJ-5 Nevada City, Ca $2500

• CATEGORIES: CJ5 • TAGS: .

UPDATE:  Price droped to $2500.  Looks like a good price

I’m guessing the year is wrong, but it looks good.

“I’m selling a 1948 Willys Jeep. It has a 283 motor in it with a Muncy 4 speed. It also has fiberglass frontend, soft top and bucket seats. I’m asking $3000 obo. If you have any questions or want to see more pics please email or call me (530) 477-2470”

http://sacramento.craigslist.org/cto/1661187540.html

 
To Top

3 Flatties Phoenix, AZ **SOLD**

• CATEGORIES: CJ-2A, MB

UPDATE: **SOLD** Was $4000

“Thinking about selling my collection, will take offers. The yellow one is 1948 CJ2A that I have owned since 1977 area with good AZ title. Had a Buick v6 when I got it but later changed to a datsun 4 cyl, but currently no engine mounted in it. I boxed in the front frame & set up for chevy saginaw power steering box. Has stock 5:36 gear axles converted to full posi spools. The light brown aluminum top is from the frame only picture which is an MB.
The MB has no title but has been AZ forever. I have the front end w/ black out lights back to the cowl and front winshield cut through the floor area. The frame running gear is complete w/ turret mount and free floating rear axle. The engine is later model rebuilt 4 cyl. over head valve.  The black one w/ aluminum hard top I brought in from Wyoming 10-15 years ago. It is complete except for motor which is out and cracked from freeze and no body rust. Not sure what the correct model for it is but the cowl & windshield frame is same height as my CJ2A which has a round frame, this one has a square fram but not tall like a CJ3B that a buddy had. The hard top is extremely well made and looks like it has been there from original, real solid w/ more square aluminum cross braces & upright corners & removable panels than I have seen before. I have numerous extra parts from over the years, spare flat head blocks and stuff.

I bought the MB to rob the new engine, free floating rear end and hard top for my 2A because I bought 2 sets of new disc brake conversions and was going to install on all 4 corners w/ locking hubs on all for towing. Then I found the black one and the top w/ doors was to good to pass up. The disc brake seats I ordered new and are still in the boxes. Serious inqueeries only, not in financial problems just considering selling to best offer over 4K

 
To Top

1948 Jeepster Byram, MS **SOLD**

• CATEGORIES: Jeepster • TAGS: , .

UPDATE: **SOLD** $8000.

This looks nice.

“First year for the Jeepster-this is an older restoration and is a good driver-original drivetrain-4 cyl overdrive-not a show car but could be asking $8k obo or equal trades considered.”