To Top

1958 CJ-3B Coopersburg, PA **SOLD**


UPDATE: **SOLD** Was $5000.

This is still a project, though lots of money has been invested.

“This is the rock bottom price. Jeep is $5000.00 Thats it!!! If you dont have it, dont contact me.
Title for 58 Willys
Body was brand new, no rust. A new steel body is $4000.00
Motor, 400hp Chevy 350, professionally built, runs awesome, more than $4000.00 invested
Brand new professionally built frame, no rust
nice 33 bfg mud terrains
custom bumpers
red top optima battery
rhino lined interior
full cage
new corbreau seats $450
new wiring harness
$500 autometer gauges
Jeep needs paint, wireharness, brakes bled, some odds and ends
More than 10,000 invested.”

To Top

1958 DJ-3A Lehighton, PA **SOLD**

• CATEGORIES: DJ-3A, Last Ride

UPDATE: **SOLD** Was Make Offer.

If the VIN is original to the body, then this is a 1958 DJ-3A rather than a 1940s CJ-2A.  Not that it really matters, as there’s not much here (except for a good VIN plate).

‘Hello, I am selling a rusty 1940s vintage willys.. Either complete or just selling some parts.. Overall its pretty rusted/shot however It does have the orignal rear end as well as many other parts.. I also have 8 Orignal wheels that are also for sale or that will just go with the jeep as well as many other parts.”

To Top

1945 MB House Springs, MO **SOLD**


UPDATE: **SOLD** Was $14,000

(10/10/2010) Here’s a rebuilt MB.

“1945 WWII Willys MB Jeep
Frame Serial # 411789
Data Plate # 209799
Engine # m33775wn
Hood # 20303503

Newly rebuilt engine and restored engine compartment, a few item left to add to complete engine compartment. 102 miles on new engine. Combination of restored original, NOS and reproduction parts. All period correct. This is a must see to appreciate. all documentation and receipts for completed restorations process plus eye candy items To many items to list. Frame from 1945, with orig. frame VIN tag. Tub from 1943 with orig data plates. Titled as 1947.”

To Top

1977 CJ-5 Martinsburg, WV $1000


Wayne asked me to list this project for him.

“1977 Jeep CJ5
Title/VIN #
I am re-listing this Jeep, price is now lower and includes all parts listed!!!
304 V-8.
77,000 original miles on motor
Jeep is complete, but it is still a project. Needs re-wired, and gas lines/tank re-installed.
Minor rust on body, worst spots are on passenger side rocker guard, and under windshield. Frame has some rust spots, but is not broken or bent. Cab floor is solid, rear of tub has some rust on the inside.
I bought this Jeep as a project; I just purchased a new Jeep Wranger JK. Wife says one too many projects around, this is the last one to go. Buying a house this Spring, don’t want to take Jeep with me. First time seller on Craigslist, if it doesn’t sell on here, will advertise Jeep locally. I have all parts to get this project rolling, (extra solid frame, extra vinyl seats, new fuel lines, diamond plating for rocker guards/windshield).
Jeep will come with a new starter (installed). Please help this Jeep find a good home.

Jeep will have to be towed or trailered.

You can hear Jeep start and run, but wiring is a mess.
First $1,000 CASH takes it!!!
Call or text if you are interested. 304-671-3743”

To Top

1951 CJ-3A Clovis, Ca $4500


This looks good, though I’m not a big fan of the fan being installed on the outside of the grille.

“1951 Jeep 351 chevy motor, 3 speed, runs great, 35 inch tires like new, lifted $4500.00 or willing to trade for more info call J.R @ 559-270-4569.”

To Top

Year? CJ-2A? Mabelvale, Ar $500

• CATEGORIES: CJ-2A, Last Ride

A big project yes, a “good project”?  I don’t think so.  If only character was valuable, this might just fetch $35k at a Barret auction.

“Not sure what year it is. Has a motor in it, but would need work. Good Project.
(501) 4 1 6 – 6 1 0 7”

To Top

1957 FC-150 Hopatcong, NJ **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: .

UPDATE: **SOLD** Was $3000

Seller must sell.  It looks like there is rust on the passenger side.

“1957 jeep foward control flat 4cly cab is off a 61 runs and drives, rare truck must sell”

To Top

1959 FC-150 Manchester, Ga $1200

• CATEGORIES: FC150-FC170-M677

No pics provided.

“Excellant candidate for restoration, this green mechanically complete 1959 FC jeep truck has been parked a long time. Has a 1965 retro fitted Buick V-6 engine , all glass in good shape, includes original owners manual. Can deliver up to 50 miles for this price. Charles Williams 706-656-1279 any time.”

To Top

Willys/Jeep Parts Little Falls, NJ $200


A misc collection of items.

“Contact Mike- 973-650-0689.  Parts from M-38 and CJ-5.

Driver Seat- $25 solid and no rust, has plywood attached, metal supports still there and origional
Gas Tank-$50 will fit M-38, CJ2A, CJ3A, and Early CJ-5 solid tank, no rust inside or outside. needs to be cleaned
Floor Pans- $5 each, from M-38 and early CJ models.
Tool box lid- $10 no rust, hinges solid, includes latch
Master Cylinder- $10 needs to be rebuilt
Two Brake Cylinders-$10 for both, need to be rebuilt
Transmission support plate and bracket, M-38 and CJ2A type- $40, both solid and have been cleaned and painted
L-134 Exhaust pipe from manifold- $5 solid, no holes
Windshield wiper motors-$10
Windshield wipers-$5
Heater that fits under the cowl- $20
Horn- $10
Brake pedal and clutch assembly- $20
Carter Carberator- Not sure of type- $20
British carberator- not sure of type- $10
Brake line guards for dana 25 front- $5 both are in rough shape
4 leaf spring shackles inner- $ 5 each, all four are brand new, will fit all Willys Jeep models
Two body mount brackets- $5 each, brand new, will fit all Willys Jeep Models
CJ-5/FJ speedometer- $5
CJ fuel gage-$5
Fuel Pump-$5
Directional assemblies- $10 each
Parking Brake Handle-$10

Take all for $200, Mike 973-650-0689”

To Top

1951 CJ-3A New Paltz, Ny **SOLD**


UPDATE: **SOLD** Was $4000.

Looks like it could be solid, but hasn’t run in 3 years.

“Work jeep with soft top. 4 cylinder. Was running when last used about 3 years ago. Snow plow included. Garage kept. NADA average retail value of $10,165.”

To Top

1946 CJ-2A Tulare, Ca **Status Unknown**


UPDATE: Was priced at $900. **Status  Unknown**

“im selling my project all running gear work and in good shape motor is half complete so will need to be replaced tiers are 31″ on 15″ rims and only have 3000 miles on them. i will be interested in trades just make an offer. ”

To Top

Warn Overdrive Northern Idaho $500

• CATEGORIES: OD Saturn/Warn

UPDATE: Pics provided.  Price dropped to $500.

“i have a overdrive with shifter and linkage for willys jeep very clean 208 818 3120”

To Top

1946 CJ-2A Portland, Or $3500


This appears solid.

“i have a 46 willys jeep for sale runs rives good has 302 4 speed twin stick tcase has near new 33inch tires nice soft top and soft doors and full cage nice jeep 6500.00 trade for quads toyota ????????????”

To Top

1948 CJ-2A San Fernando Valley, CA **SOLD**


UPDATE: **SOLD** Was $3500

This needs an engine rebuild at the very least.


To Top

1948? CJ-2A/3B San Fernando Valley, CA **SOLD**

• CATEGORIES: CJ-3B • TAGS: , , , .

UPDATE: **SOLD** Was $6900

Has an unusual body.  My first thought was unibody, maybe fiberglass(?), as I can’t see seams between the front clip and the body.  In fact, the hood appears to be a normal sized low hood that sits a top a solid CJ-3B clip (fenders/body/grille all molded/welded together).

“1948 Jeep Willys, 289l V-8, auto trans, B&M shifter, low miles, new interior and upholstery, soft top included, all terrain tires, aux. fuel tank rack, alloy wheels, tow bar, clean paint, runs excellent.”


To Top

1946 CJ-2A Arizona **SOLD**


UPDATE: **SOLD** Was $35,750.

Bill spotted this …  as he suggested, sit down …. the auction estimate was $12,000 – $17,000 which in itself is an inflated price in my opinion.  However, this past weekend this franken jeep sold for $35,750.

“63 hp, 134.2 cu. in. flathead four-cylinder engine, Carter carburetor, three-speed manual gearbox with low-range, four-wheel drive with live axles front and rear with semi-elliptic leaf springs, four-wheel hydraulic drum brakes. Wheelbase: 80″

– From the Bill Jacobs Collection
– Only 578 miles since total nut-and-bolt restoration
– Original Forest Service Jeep with shovel and axe included
– 4WD with low range, trailer hitch, full gauge package

The 1946 Jeep offered here is beautifully finished in white. It was reportedly the property of the US Forest Service and carries the appropriate axe and shovel. It was the subject of an extremely detailed two-year restoration in 2001 by Jim Neirynck of Macomb Township, Michigan.”

To Top

Dan saves the day!


My car broke down on i84 near hermiston tonight. My hose sprung a leak and i lost coolant over a stretch of a few miles. I didnt notice until my warning light voice activated, basically telling me to get off the damn road. After an hour or so Dan, who works for the oregon DOT saw me and offered to help. one thing lead to another and it turns out Dan owned a 1973 cj5. As you can image, jeep talk filled the conversation for the remainder of our time together. After stops at the auto parts store and ace hardware, i got what i needed to put everything back together. So, big THANK YOU to Dan!!!!!
No updates tonight as i wont get home until late. Another day, another adventure!!!

To Top

Internet Slow Tonight


I seem to be driving in the internet’s slow lane tonight, so just a few updates!

To Top

Oldies but Goodies – Desert Dog Tires

• CATEGORIES: Biscuit, Features • TAGS: .

The main reason for my trip to Seattle this weekend was to pick up a set of Forumla Desert Dog tires from Mitch with some good tread still left that I can use as offroad tires.  I have four more hurricane rims just aching for these tires, so I can’t wait to get them mounted.  This should really make Biscuit ready for summertime explorations.  Thanks Mitch!

To Top

Willys Shouldn’t Live in Cages — Victoria, BC circa 1990

• CATEGORIES: Features

I think this image was snapped just over 2 decades ago outside of Victoria, BC.  That’s me in the picture, shocked at the life that poor jeep must endure.  I wanted to demonstrate the unethical treatment of this Willys.  Just look how tight the cage is!  With no place to move, to roam, to really stretch out, this poor Jeep was forced to live a semi-sheltered life outdoors, a prisoner to the whims of the weather.  And, Canadians are usually so nice!

To Top

1948 Project Bonney Lake, WA **SOLD**


UPDATE: **SOLD** Was $500

There’s some value here.  Looks like a good cage and the body appears solid too.

“This is a 1948 CJ2A with a clear title. It is sitting on a DJ frame and has a center mount Dana 44 rear end. The floor boards are rusted but the toolbox and dash are good. The windshield frame,hood, fenders and grille are also good. Pretty nice rollcage. No drivetrain.”

To Top

1946 CJ-2A Wenatchee, Wa $200


At $200 there’s some value.

“1946 Jeep Willys flat fender, body, and 3/4 ton running gear. Project. 886-0710”

To Top

Half Cab for sale Belle Fourche, SD $200


Jim is selling a half cab at a good price.

He writes, “Half cab for a CJ 2A Willys jeep for sale.  Price is $200.00 or best offer.   More pictures available. Contact Jim at 605-210-0738.”

To Top

Builds: Hugo’s CJ-3A in Uruguay

• CATEGORIES: Builds, Features, International

UPDATE: You can see the final build here.

A citizen of Uruguay, Hugo recently contacted me to appropriately correct me from confusing a town, Londrinha,  that doesn’t exist in Puerto Rico with one that does exist in Brazil (In this case, I believe I can blame Google Maps for my error!).

Because of this error, I got to know a little more about Uruguay, which it turns out I didn’t really know that much about.  One cool thing I learned is a hand was installed on (or more accurately into) the Punta del Este Beach in 1982 by Chilean artist Mario Irarrazabal.  He titled it the Monumento al Ahogado (Monument to the Drowned).  Apparently, he did another, different hand in a Chilean desert.

Hugo reports that the jeeping is excellent in Uruguay, though he hasn’t had much of a chance to jeep this summer (it is summer there of course right now), because his CJ-3A is currently dismantled in his garage for repair.  However, he did forward this picture.  Thanks for sharing!

To Top

1963 FC-170 **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: .

UPDATE:  This sold at the FC Round up in March 2011.

Kevin is selling his FC-170.  He writes, “I have for sale a rust free 1963 FC170. This truck has been hit in the driver’s door, I have pulled out most of dent from the door, it still needs someone to repair the cab door opening and then fit the door. This is an old plumbers truck from California and is rust free, someone has installed a V-8 ford motor I think it is a 289 A real nice installation job It has a 4-speed transmission with 427 gears so it goes down the road real nice the dash has been changed out too not sure why but it looks cool almost factory. This truck runs and drives great I have driven it a number of times with the door off around my area. People tend to look at you funny driving around on the freeway without a driver’s door I’m asking $6200 or best offer. ”