To Top

1950 CJ-3A Yakima, WA **SOLD**


UPDATE: **SOLD** Was $2500.

The seller wants to make a trade.

“I am selling or would like to trade for a car or rv the jeep has a f134 motor in it a t90 trans t18 t case 538 gears and a 8000 pound winch runs great. for more info please email me with pics of the trade and info”

To Top

1946 CJ-2A Boise, ID **SOLD**


UPDATE:  **SOLD** Was $8000

(02/07/2011) This appears in good shape, though there is a spot of some kind on the hood.

“I have 1946 willys really good shape will trade for vette or mustang 65 years old lol every day driver.”

To Top

Wandering Willys Jeep Club Movie Preview

• CATEGORIES: videos

Brian spotted this.  Since we are both ex-members of the WWJC, we admittedly had a soft spot for it.  Apparently, the club makes an annual movie of the year’s events and this was the preview for last year’s movie.

To Top

More on this unusual CJ-?A/MB Wagon in Bali

UPDATE:  Rudolf sent some additional pics of this rig. Steve gives a good analysis within the comments section.

Rudolf forwarded me this unusual CJ-?A/MB wagon.  Rudolf reports that this is titled a 1944 and was used for public transit in Bali.  Given the full floating rear end, the rearend might have been from a MB.  It reminded me of another vehicle with a similar wood rear end that is located in France  (see the red image below).

From France (CJ-3B Page,

To Top

1969 CJ-5 Colorado Springs, Co $500


The engine runs!  Looks like it might be a good parts jeep.

“1969 Jeep CJ-5, Dauntless V-6. The motor runs, beyond that I cant say anything such as how strong it is. The Gas tank is not connected, so it only fires up from the fuel line connected to a gas can.

Frame is straight, engine is good.

For $500.00 what do you get?

a vintage 1969 Willys CJ-5 ready for a restore or a rebuild to a crawler. A Dauntless V-6 engine that probably needs some work, but not much. Everything else like tranny, transfer case, hubs etc.. Its a rolling vehicle.

For $500.00 what dont you get?

The rims, they can be “borrowed” to get it transported, but I want the wheels and rims back. The seats. The seats in the pic are not included, nor are the mounting frames, however, I have some 65’ish seat frames/seats that will go with it.”

To Top

Year? CJ-2A Beaumont, CA **SOLD**


UPDATE: **SOLD** Was $200.

There’s $200 of value here. The rims look unusual.

“Willy’s jeep was an off road project that I never started. You haul.”

To Top

CJ-2A/3A Parts Winters, Ca


No pics provided.

“I have

TUB-rough shape with body and serial# plate.100$
FRAME-fair condition some fabrication done.100$
AXLES-offset read dana44,front dana 27 closed knuckle.4.88 gears.200$ or both 300$
Cj3a windshield perfect glass.50$
FONT FENDERS-ok condition.20$ a set.have 2 sets
DANA 20 T-CASE-good condition.pulled fron 1977 scout II.(aka TC-145)2.42 low range.100$

will have pics soon or can send them.will sell tub,fram,axles rolling for 350$ prices flexable need it gone. Call Josh 530-979-1248”

To Top

1942 GPW Seattle, Wa $15,000


Looks good.

“1942 Ford GPW army jeep 4 sale!Orignal tub $15.000 obo email with ?”

To Top

1953 M-38A1 Boring, OR **SOLD**


UPDATE: **SOLD** $1850.

This looks like a good restoration project.

“Runs and drives nicely with original 24 volt system. Good tires does not overheat just tuned up with new coil carburetor rebuild plugs and points. Pretty straight Jeep with little rust. Has had some panels replaced in past. Sunny California history from estate. Bill of Sale. Includes a bare frame with new springs and Oregon 1953 Title. Selling cheap to raise money to finish my other project. Includes rear military tail lights not shown in picts. More pictures on request.”

To Top

1947 CJ-2A Reno, Nv **SOLD**


UPDATE:  A reader bought this.  This was  a VEC with a column shift and a Warn OD! Was priced at $950.  **SOLD**

This might have a VEC body.

“1947 CJ-2A.  Willys Jeep. Driven throughout the 1970s and ’80s. Now it needs restoration. All parts are here. call John at (775) 830-2307. $950.00 obo”

To Top

1951 Model? Logan, Ut $1000


No pics provided.

1951 Jeep Willys needs someone with time to love her back to health. I bought form the original owner and I have the title ran when last parked. All original including the spiders.”

To Top

1952 M-38 Bolivar, Mo **SOLD**


UPDATE: **SOLD** Was $2200.

If there’s no rust and it runs, this might be a good price.


To Top

1954 Truck with Dump Flatbed Coventry, RI $1600

• CATEGORIES: Willys Trucks • TAGS: .

It runs, but needs work.

“1954 Willys Jeep. 4X4, 6cyl, 4 spd. Runs, this truck is a flatbed that dumps from factory. $1600 or Best. (401) 225-4323”

To Top

1946 CJ-2a Dudley, Ma $10,000


No pics provided.

“1946 willys cj2a have all oringal parts,no rust,runs strong.with snow plow”

To Top

1948 CJ-2A? Maryville, TN **SOLD**


UPDATE:  **SOLD** Was $1500.


To Top

1950 CJ-3A Coos Bay, OR **SOLD**


UPDATE: **SOLD** Was $3000

(11/14/2010) “I have for sale a 1950 Willys CJ-3A in close to original condition. Sold with clear Oregon Title. This vehicle was in use by the Butte County Mosquito Abatement department in California since the mid-fifties. The last entry on the maintenance record shows 70,302 in 2005 but when I got it the speedometer head was frozen so Im not sure of the exact mileage. Since I have owned it I have put an additional 1,200 miles on a new speedometer. It always gets lots of attention and questions/comments from vintage Jeep admirers. The engine was replaced at 54,970 in June of 1972 with a CJ-3A engine #3J20172. The vehicle still retains the original 6-volt electrical system. Since I have owned it I have replaced the clutch, throwout bearing, pilot bearing, clutch linkage, fuel pump, fuel tank, fuel lines, and vacuum lines. The transmission and transfer assemblies have both been rebuilt along with the carburetor. I have replaced the center tie rod end assembly and rebuilt the drag link with new parts. I have installed new upholstery for the seats and backs along with new seat pans and seat belts. The canvas top and hardware will not be included as they belong to another project I have started. There are two areas where rust needs to be addressed. 1. The passenger side hat channel. 2. At the rear of the drivers floor area behind the fuel tank. I have replaced the tailgate and hood with new ones that have the Willys stamped logos. I’ve tried to be as complete in my description of this vehicle as I can and can honestly say it is a dependable vehicle. Please feel free to call if you would like to inspect this great little rig. Thanks for looking. Please feel free to ask about anything that concerns you regarding this vehicle.”

To Top

Lawrence’s 1952 M-38A1 Union Mills, NC


Lawrence has decided to sell his hinged grille 1952 M-38A1.  I’ve gotten to know Lawrence over the past few weeks and I feel comfortable saying that this M-38A1 should be in excellent mechanical shape. You might remember Lawrence’s other jeeps, which I featured here.

As an ex-army motor pool and ex jeep dealer mechanic, Lawrence knows his way around jeeps very well.  He’s also a practical guy and as such, has replaced the normal gearing in his jeep with more road friendly 4:27 gears along with an overdrive.  The beachwood canvas top and seats are pretty new. He switched the stock carb for a holley, as he prefers that carb.  He’s replaced the standard bellcrank with a custom version that he invented which pivots on tapered bearings (if you want one, just let me know); along with the bell crank, he improved the stock steering so that the jeep responds well on the road. This has been converted to 12 volt, though it came with an unusual 24 volt heater which Lawrence believes was installed by the army (and in the process they removed the battery box).

If you are looking for a M-38A1 that can pass for stock, but can also be a dependable road jeep, you might consider calling Lawrence at 828-287-5275.  He was thinking of a price in the $7k neighborhood.

I only have these 2 pics.


To Top

1946 16″ Rims Hampton, Ct Best Offer


“3 1946 willys jeep 16″ rims. In great shape. B/O.”

To Top

Wanted: 4 16″ Stock Rims Utah/Idaho

• CATEGORIES: wanted

Anyone in the Utah/idaho area have 4 16″ stock rims? I’ve got a buyer for them.

To Top

Scouts and Wagons Stanly County, NC

• CATEGORIES: Other 4x4s, Willys Wagons

Maybe there’s something here for someone.

1976 and 1973 Scout for sale

Both have good 345’s. One has a 3-speed, the other has an automatic. Both have dana 44’s. Both are projects but were on the road several years ago. Both have removable hard tops and clear titles. Asking $1000 each or will sell together for $1800.

1949 and 1959 Willys overlander wagons

The 1949 has a good 292 v8 with a t-98 four speed transmission with a granny low gear. It comes with a dana 18 transfer case. Has a dana 25 axle up front with a dana 44 in the rear. Most of the hard work has been done, but there are things that need finishing. It has a lot of parts included, such as a power steering assembly, power brake set up, after market wheels, and much more. It has an extremely soild body with hardly any rust. Most of the orginal paint has been stripped down to start the body work. Asking $1400

The 1959 comes with a lot of new replacement parts from willys of America. It has no engine. But does have a t90 transmission, dana 18 transfer case, dana 25 axle up front, and a dana 44 in the rear. It is taken completely apart, but all of the body parts are included with the sale. Asking $700

I have way to many projects and need the room, that’s why they are all for sale. Will sell both wagons together for $1800. Will sell everything together as a package, 2 scouts and 2 willys wagons, for $3200.

These would be great rock crawler, off road, or mud trucks. Everything you will need is there. My plans were to use the scout running gear in the Willys wagons, but I have to many other projects going on. All prices are negotiable.”

To Top

1954 CJ-3B MIlton, Vt $2250


The engine is rebuilt and looks nice.

“1954 Willys Jeep CJ 3B . . . Have done a lot of mechanical restoration on this Jeep. It has a rebuilt engine with new clutch.

New: Brakes all around; shoes, wheel cyls.,hoses and lines.
Radiator, hoses,and waterpump
Fuel tank, fuel pump,and rebuilt carb.

It runs and drives well. Was originally 6 volt system.Somewhere in its life someone converted to 12volt system. Everything works but, I would probably replace the wiring harness because it is the original harness and is old. The frame is good, getting thin by rear spring shackles,but not hard to repair.( hey, it is a 56 yr old frame,how long does a frame last on a Toyota today…?) The body is original as far as I can tell. Has been patched up, needs a little more to be inspectable for the road.Top, is all there but,as you can see in pictures is coming apart at the seams. Very easy to restore, not much that is not available from various parts vendors to restore one of these old Jeeps. Asking $2250 (don’t call and offer $1000, unless you want a rolling shell) Call 802-343-0112. Thanks for looking.”

To Top

1943 MB? Seattle, Wa $600


No pics provided.

“for sale 1943 jeep with hardtop body is in good con call for more info $600.00 obo call Jesse at 253-222-4957”

To Top

Year? M-38 Lompoc, Ca $2000


UPDATE:  Price dropped to $2000

(06/28/2010) It’s priced a bit high given the amount of work left.  It’s got some old school steel wheels.

“This is a project jeep. It has rebuilt Ford 289 engine ready to be put in. It has flat front fenders and a hood.”

To Top

1957 CJ-3B Glendale, Ca $700


UPDATE:  Still Available

(04/09/2011) This tub is half CJ-3B (front) and half DJ-3A (rear).

“Yes, it is still for sale, I have had issues getting my phone messages. If you have called and didn’t get ahold of me, im sorry, feel free to call back.  I am moving out of state and don’t have room on the trailer for this project.

I am selling my 1957 Willys CJ3B project. I have been slowly getting this thing built, but I just don’t have the time to finish before I leave and no room to take it with me. The Tub is a mix of CJ3B cowl with a ’56 willys DJ3 / MB tub (the DJ cowl was cut up and gone before I got the tub) sitting on a ’70’s 2wd mail jeep chassis with a Dana 44 rear axle and stock 2wd front axle. The 70’s mail jeep chassis has the better steering and is stonger around the engine area then the CJ frames, has out board mounted rear leaf springs and brand new 31×10-15 tires.

I was building this jeep for the sand dunes, so the original 4cyl is long gone, I will include a rebuildable chevy 350 v8 and chevy short shaft th350 automatic transmission. Neather are mounted and they do need rebuilt

So for $700 you can have an old jeep project…or buy the wheels, tires, engine and trans and get the rest of the stuff an a bonus. Let me know if you are interested, I have the title in had, not yet notorized.  Eli-509-230-7239”

To Top

1947 CJ-2A CDA, ID **SOLD**


UPDATE:  Was $3500 **SOLD**

(12/19/2010) lThis needs additional work.

“I have a 1947 willys cj2a. it is a project.

The good :It has toyota axles with landcruiser springs, sitting on 35″ tires. It has the buick 225 odd fire engine. custom front and rear bumpers. comes with roll cage and soft top and doors. All new sunpro gauges. aftermarket seats and fuel tank.

The bad: needs drivelines, rear tail lights, finish wiring (starts right up but cant get battery to charge) and just needs a couple odds and in’s.”