To Top

1948 CJ-2A Kailua, HI **SOLD**

• CATEGORIES: CJ-2A, CJ-3A

UPDATE: **SOLD** Was $3000.

(11/26/2010) “1948 Jeep Willys CJ2A, Asking $3500.00 OBO. All reasonable offers will be considered.  Needs a windsheild, brake job, paint and minor body work. Otherwise runs great. Custom made bumpers and tow bar.”

 
To Top

1959 CJ-3B Porterville, CA **SOLD**

• CATEGORIES: CJ-3B

UPDATE: **SOLD** Was $1200

“1959 Wills Jeep 351 Ford, C6 tranny. Runs and drives. Needs headlights and tail lights. Off dmv record. Bill of sale only. Call or text for more info. ”

 

 
To Top

John’s D44 Rear Axle Modification

• CATEGORIES: Features, How To

UPDATE:  I initially had this as a front axle modification, which was clearly incorrect (the lack of a stearing knuckle should have been my first clue!)

Thanks to John for putting together the narrative and the images!

“Thought some other folks might find this interesting, especially those that have swapped to the D44 rear axle.

While trying to cobble some parts together to build a D44 front axle for my CJ6, I  noticed that the GM D44 small bearing spindles that came with the flat top knuckle axles had the same number of  stud holes as the offset D44 in the back of my CJ.  Knowing that the 2 pc. axle shafts were a weak point, I had kicked around the idea of finding a 71′ offset flanged axle, and installing Herms FF Kit. I figured the flanged D44 would be a long shot, and I didn’t really like the tapered shafts in Herms kit, as you have to pull the spindle to get the shaft out.  So,what to do?  I ended up at R&P 4wdin Oregon City, and asked Richard and Paul what they thought about using the GM spindle to make a full float axle kit. At this point, Rich got a twinkle in his eye and asked me to follow him out into the shop.  From some shelf, he pulled a half machined spindle out, and said, “like this?”. Perfect!  This kit probably wont be for everyone, but was a homerun for me. It lets me run the same Ford 1/2 ton hub and rotor as the front(to keep things 5 on 5.5), the same internal splined locking hubs as the front, and GM calipers.  Overall the FF kit added 2″ of width to my rear axle (same as the front), and I got an axle shaft that is full diameter(30 spline inner, 19 spline outer), and is removable without pulling the spindle.  I ended up running a late 70’s Cadillac caliper (that uses the same GM backing plate as the front), and has a E-brake. And all for a little less than a grand.  I hope somebody out there will find this as cool as I did.
Thanks,
John
“im a doughball”
 
To Top

Various WWII Jeep Images

• CATEGORIES: Features, Old Images

Bob forwarded some links to jeeps from the WW2 In Color website and the Lone Sentry Site.

FROM WW2INCOLOR:

FROM LONESENTRY:

 
To Top

1947 CJ-2A Greeley, CO **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE: **SOLD** Was $4900.

This appears in good shape.

“1947 Willy CJ2A Jeep 4×4 , In Great Shape very little rust , 12 volt system , 3spd Trans , Rebuilt Flat head Motor ,Mud & Snow Tires , Needs new top , $4900.00 , Run and Drives Great”

 

 
To Top

1962 M-38A1 Bakersfield, CA **SOLD**

• CATEGORIES: M-38A1 • TAGS: .

UPDATE: **SOLD** Was $2950.

This looks solid.  Remove the cammo and this might look pretty good.

“Up for sale from my Father’s Estate a 1962 Willys Jeep. Motor completely rebuilt by Reynolds Machine Shop. (Have paperwork detailing motor work). Good Tires, No Rust, Runs like a striped a** ape”

 
To Top

1958 CJ-5 Oakdale, CA **SOLD**

• CATEGORIES: CJ5 • TAGS: .

UPDATE: **SOLD** Was $1400

It needs rewiring finished, but that shouldn’t be too difficult.  There’s some value here.

“I have a 1958 Willy’s CJ5 Jeep that was a ranch jeep until it was moved here to Oakdale where we used it in our pastures. Started to rewire it and just never got around to finishing it. Have all the parts, just not the time. You want a project jeep it has an “Odd Fire” V6 that ran pretty strong until I started to rewire it. If you have the time come take a long and if you want to talk price I am willing within reason.

I forgot to add that this does have a hitch for towing the Jeep but since I’ve never towed it on the road I don’t know what the legalities of it are.”

 

 
To Top

1953 CJ-3B Arizona **SOLD**

• CATEGORIES: CJ-3B • TAGS: , .

UPDATE:  **SOLD** Was $12,000

Charlie is selling his well restored CJ-3B.  You can read about the restoration at the CJ-3B Page.  It has approximately 3000 miles on it.

 
To Top

1952 M-38 Tulsa, Ok $2500

• CATEGORIES: M-38

This needs some work.

For Sale: 1952 Willys-Overland Military Jeep M-38 Model C
Has been converted to 12volt system
Has wench on front bumper(not sure if original to vehicle)
Body looks rough, but seems very solid. I have found only three small holes rusted through the body.
Previous owner painted over OD green with Blue paint (now faded and mostly peeled-off)
Gas tank is completely rusted out.
All three seat frames in Jeep.
4 brand-new tires and inner-tubes.
Rear spare mount and spare with original tire
Flat hood and flat fenders.
Shovel/axe mounts on passenger side
I have not gotten the Jeep started. I put an ignition switch in and the engine turns over great. No fuel to carb yet to actually start it.
Sorry for quality of pictures. Will take more if needed
Clear Oklahoma title with Black tag
Seller would consider partial trade on any Military-issue/style gun.
Call 410-294-7965 9am-9pm CST any day. Ask for Richard”

http://tulsa.craigslist.org/cto/2371458530.html

 
To Top

1953 Wagon Fair Oaks, Ca **SOLD**

• CATEGORIES: Willys Wagons

UPDATE:  **SOLD** Was $2500

There’s surface rust across the top, but the chrome looks good.  No inside pics.

“this is a great project, in good condition, needs paint. there are new parts on the 307 small block engine, new holley carb. it starts and drives needs new gas tank. title is clean and is non op. no DMV back fees. ”

 

 
To Top

1946 CJ-2A Nevada, Mo Call for Price

• CATEGORIES: CJ-2A

The body is supposed to be solid.

“i have a 1946 cj2a. sorry but the pictures are the best i can do right now. it is i n corner of my shop. i have just about everything to complete minus motor and transmission. im going to move and getting rid of things i don’t really want to move. tub is as solid as you will find anywhere, window frame, seats, ect pretty much all there. i have a lot of extra parts that will go with it, please only contact me if you are serious. the parts in this condition are worth quite a bit, i can meet anyone interested in looking just text and we can make arrangements. 417-684-1241. thanks mark”

http://kansascity.craigslist.org/cto/2373396042.html

 
To Top

1951 CJ-3A Fostoria, Mi $2400 (includes trailer)

• CATEGORIES: CJ-3A, trailer

This might be worth a look.  The jeep runs.

“1951 willys jeep with plow runs but needs some work with 12 ft trailer perfect size for the jeep 2400 obo for both 1600 obo for jeep alone and 800 obo for trailer alone call 989-795-2671 no calls after 9pm please”

http://flint.craigslist.org/cto/2372026931.html

 
To Top

1950 CJ-3A Santa Fe, NM **SOLD**

• CATEGORIES: CJ-3A • TAGS: .

UPDATE: **SOLD** Was $5000

“1950 Willys Jeep CJ-3A. Completly redone in great condition.”

 
To Top

1953 CJ-3B Hinckley, MN **SOLD**

• CATEGORIES: CJ-3B • TAGS: , , .

UPDATE:  **SOLD** Was $4000

(09/21/2010) You had me at teel wheels with desert dogs.  The reason for the sale is sad.

I have ALS sd cant drive tis anymore. Great shape, Must sell. All original 11,000 miles”

 
To Top

1966 Tuxedo Mark IV CJ-5 Columbus, IN **SOLD**

• CATEGORIES: CJ5 • TAGS: , .

UPDATE: Still Available.

(05/10/2011) This looks nice.  This is either “one-of-a-kind” or it is one of 1872.  Can it be both?

“ONE OF A KIND 1966 CJ-5 A (TUXEDO PARK EDITION ) only 1078 MADE IN 1966. THIS IS NO RUST BUCKET. THIS JEEP IS ALMOST PERFECT. NEW SHOCKS, 12,000 LBS WINCH, FACTORY BUICK DAUNTLESS V6 WITH 79,000 ORIGINAL MILES!!!!!!!!!!!!!! SERIOUS INQUIRIES ONLY.”

 

 
To Top

1950 CJ-3A Providence, RI $1800

• CATEGORIES: CJ-3A

This looks pretty rough.

“1950 CJ2A Great drivetrain and frame RUNS and Drives Great original Hood, Tailgate, Soft top door frames. Tub is pretty rough asking $1800 Call or text 401-481-2843”

http://nh.craigslist.org/cto/2371962450.html

 
To Top

1957 CJ-5 Canton, Oh **SOLD**

• CATEGORIES: CJ-3B, CJ5 • TAGS: .

UPDATE:  Pics now provided (thanks Bob). Was $2000. **SOLD**

“All original, very solid Willy’s Jeep”

 
To Top

1952 CJ-3A Elizabethton, TN **SOLD**

• CATEGORIES: CJ-3A

UPDATE:  Was $1750. **SOLD**

(09/24/2009) “1952 Willys Overland Jeep 4X4 in Fair Condition, Runs and drives off road. I believe it has the “Go Devil” engine. Runs and Drives, 6 Volt, needs new battery. New plastic gas tank, new wiring, Leather seats, some newer brake lines, newer master cylinder ”

1952_cj3a_elizabethton

1952_cj3a_elizabethton2

 
To Top

1946 CJ-2A Hercules, Ca **Status Unknown**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE:  **Status Unknown** Was $5500.

(04/30/2011) “Restored and runs excellent! Any questions please contact.”

 
To Top

2 Photos from W.E. Duggar

• CATEGORIES: Features, Old Images, Women & Jeeps

Bob pointed me to these two images taken by SFC W.E. Duggar while stationed at Fort Sill, OK, in 1942 as part of the 1st Infantry Division – Dixie Division, 167th Infantry, 3rd. BN.  The first one is particularly wonderful.

 
To Top

In Bali, Rudolf Continues to Find WWII Jeeps

• CATEGORIES: Features

Rudolf has found a variety of interesting jeeps for sale in Bali.  Here are pics of an unusual GPW.

 
To Top

1952 M-38A1 Cool, CA **SOLD**

• CATEGORIES: M-38A1 • TAGS: .

UPDATE: **SOLD** Was $1500.

Here’s another ‘Cool’ jeep from Cali.

“This is a 1952 Willys Army jeep in need of a restore. It has never been restored. The engine indicates it was rebuilt in occupied Japan. It’s located in Cool, California, half way between Auburn and Placerville in Gold Country. Bring cash and pick up this awesome project car! Here’s a link to some photos: ”

 
To Top

CJ-2A Top Springfield, Va $100

• CATEGORIES: CJ-2A, Parts

Not perfect, but a great price.

“AFTERMARKET SOFT TOP OFF OF 47 CJ2A JEEP. WHITE, A COUPLE OF SMALL HOLES, WINDOWS DIRTY BUT WILL CLEAN UP. SNAPS REQUIRED TO MOUNT ON SIDES. COMES WITH DOORS. ALSO HAVE SOME ENGINE PARTS WILL THROW IN 703-354-1885”

http://washingtondc.craigslist.org/nva/pts/2365396254.html

 
To Top

Early CJ-3B Lake Winola, Pa $1000

• CATEGORIES: CJ-3B

It runs.

“50 something willys cj3b jeep $1000.00 or best offer
has f-head 4cyl. runs good it doesnt have brakes
THE TIRES IN THE PICS. DONT GO WITH IT .I WILL PUT ROLLERS ON IT . AND THERE IS NO TITLE
it would be great for parts or project
call or email put jeep in the email to much spam 570-four66-006seven
no texting no calls after 9pm ”

http://scranton.craigslist.org/pts/2369916180.html

 
To Top

1949 CJ-3A Idaho Falls, Id **SOLD**

• CATEGORIES: CJ-3A • TAGS: , , .

UPDATE: **SOLD** Was $4000.

This appears solid.

“Very clean, Sheaded, New 4 Cyl. Gas Motor. Well maintained, fold down windshield, Cab, doors, spare tire, tow bar, burns NO oil. Has very low crawling gears. 35,000 mils, 2000 on new motor. no emails,”