To Top

Snow Plow Sherrill, NY $350


Here’s a plow.

Meyer plow set up off my 63 Willy’s Jeep, may fit others. Plow has an electric winch assembly that was working when I removed from my jeep. If you have any questions please feel free to contact me.”

To Top

1950 Jeep Rod Truck Largo, Fl $3500


This seems a bit pricey given the condition of the project.

“1950 willy’s truck cab that is chopped with custom built box frame. Speed way drop front axle kit. Rear semi elliptical springs and original willys axle. Needs steering set up has reverse corvair mount and steering link. May consider trade for Amc car or jeep wagoneer, fox body, some ford or a built sbchevy engine. Want to get something equal value. I have a title but it needs to have an id plate made for it. Email if interested, thanks shawn”

To Top

1963 CJ-5 Wyckoff, Nj $1500


This is a running CJ-5 with an old school top (very hard to find), nice rims, new fenders, v8 and sm465.  This might have some good value.

“This is my 1963 Jeep CJ-5. It has a Chevy 350 v8 engine with a Chevy sm465 four speed with granny low manual transmission, Dana 18 transfer case connected by an Advance Adapter conversion adapter. It have custom made driveshafts, a 4 inch trailmaster lift and shocks with Conferr 1.25 inch lift shackles. It has stock rears with 5.38s in them and a dana 44 out back. The transfercase was lowered using a Rancho lowering kit. The steering has been updated but needs to be finished to use a saginaw box and a gm column. The engline and trans were rebuilt with low miles years ago but its been sitting for ten years and needs some going over. The clutch is brand new and doesnt have a mile on it. All the brake and fuel lines have been re run and are new. It has headman headers with glasspacks. Exhaust needs to be finished. it will need the clutch to be hooked up to the pedal and a radiator. There is no grill in the pick but I have one with no rot. The floors have been replaced and there is no rot on the body. The body was off of a 75 I believe. The fenders were new replacements . It has a poly replacement gas tank. It will need a master cylinder and booster. It has custom skid plates under the ubolts. Mustang Seats. A very rare bestop fastback top in very good condition. I have a dash with all the gauges in it that goes with it. The tailgate was replaced but has some minimal surface rust. Diamond plate rockers are included. She is sitting on 35 inch bfg mud terrains on American racing Outlaw Rims. Tires are dry and will need replaceing. This Jeep is near completion and will make somebody a great project. I just dont have the time to finish it right now. Feel free to ask any questions. Matt Wrangler not included lol”

To Top

1960 Wagon Arlington, Ma Make Offer

• CATEGORIES: Willys Wagons

The seller has attempted to be honest in noting that while it might look similar to a Maverick Wagon, that look was not original.  That said, the suggestion of using NADA as a guide for pricing this suggests the seller may have an unrealistic price in mind.

“1960 Willy’s Jeep Rear Wheel Drive Station Wagon / 83,000 Original Miles / MUST SELL BEFORE 1-20-10 FOR BRO

• 83,000 original miles
• Original 4 Cylinder Flat Head Engine
• Three speed manual w. overdrive [original 60’s Jeep transmission, not original to this car]
• Custom ‘Maverick’ paint and side trim package [‘period’ but not original]
• Chrome grill and hood ornament
• Excellent heater/defroster
• High quality contemporary AM/FM radio w. cassette and four speakers

Third owner, in excellent restored condition until stored outside on dry asphalt for four years. He now needs a new home where he can have the following:

• Valve job
• Repair of a leaking brake line and a new battery
• Replacement of lower door panels, rocker panels, the hinge and skirt for the lower tail-gate, the body mounts … all readily available at reasonable cost
• A fresh repaint

In the last picture you will see Willy as he appeared prior to going into storage … and to return him to that condition … the above is all he needs to keep his next family smiling for another 20+ years.

Look at Willy’s low original mileage, his excellent condition above the rocker panels, and the NADA values and other Jeeps on the internet … then make a reasonable offer … and Willy can be yours!”

To Top

1956 DJ-3A, 1950 Wagon, 1947 Truck Bethlehem, Ct **SOLD**

• CATEGORIES: DJ-3A, Willys Trucks, Willys Wagons


This seller has several vehicles for sale.  No pics yet with the DJ-3A

1956 Willys Dispatcher DJ3A for sale. Has a 340 buick Engine and has a 400 T. H. Trans. Asking 5000.00 or best offer.”


1950 Willys Jeep Sedan Delivery. 4-Wheel Drie. Buick V-6 Engine. Asking 6000. 00″


1947 Willy’s Jeep Pick up for sale. Chevy Drive Train. Was Rebuilt around 1970. Asking 5000.00 or best offer. Any questions please call 203-266-5050.  Ask for Bernie.”

To Top

1964 CJ-5 Enosburg, Vt $695


This is one of several automobiles the seller has for sale.

“1964 willeys jeep. steel top &doors. real nice frame. runs and moves . 4cyl. has plow with hydrolic lift and manual angle. this jeep had been sitting and needs work. $695. money talks.  Call the owner Ray @ 802-933-2830 leave a message if not home.”

To Top

Nice Passenger Fender Concord, NH $100

• CATEGORIES: Body Parts

Here’s a good price on a never-installed passenger fender.

46-52 CJ2A, CJ3A, M38 passenger side fender. Reproduction solid never installed.  603-783-1209″

To Top

1958 CJ-3B Statesville, NC $3000

• CATEGORIES: CJ-3B, trailer • TAGS: .

UPDATE:  The seller has added a trailer into the deal

(01/09/09) It looks like there might be some rust on the driver’s side, but hard to tell for sure from the pic.

1958 Willys CJ3B, original engine, runs good, new gas tank, steering wheel, speedometer, wiper motor, wheels seat belts, roll bar…everything is mecanically good and everything works…I drive it on the road…it has some body rust but otherwise is solid. 704-902-0121, 704-878-9661

To Top

Images from the Mid East?

• CATEGORIES: Features, Old Images

I think at least some of these images are from Israel?  If not, I believe they are from that general area.

The first one might be the newest.  I’m not sure if the grilles and fenders are armored or not, but most certainly appear heavy duty.

Note how thin and tall the tires are on this jeep.

Now, that seat below can’t be comfortable for long drives!

In the two pics below, the people look like they are from ‘Rat Patrol, The Reality Series’.  I think either the jeep in this first pic is a 1948 or the image was taken in 1948?


To Top

Chris’ DJ-3A

• CATEGORIES: Builds, DJ-3A, Features

Searching for something else, I discovered Chris Kelley’s blog and his new Willys: a 1956 DJ-3A with 4wd.  I’ve seen enough DJ-3As with 4wd that I asked Bruce if he knew whether any DJ-3As came with a 4wd package, but to the best of his knowledge (which is the best I know of) he said there was no 4wd option of which he was aware.

Chris writes on his website about new purchase (sept 7 09) “Yep, you’re looking at a 1956 (sort of) CJ3a (sort of) Willy’s Overland Jeep (completely!).  Its sort of a 56 since that’s what the tub plate says.  Its also only sort of a CJ3A since the tub plate also says its a DJ3a, which was a 2 wheel drive version made for the postal service and other delivery trucks.  However, my best guess is that someone replaced the original tub with the one it has now, since this does have 4WD.”

It’s a good looking jeep, though there’s a small ding in the passenger rear, and here some pics from his site:

To Top

1951 CJ-3A Alvin, TX **SOLD**


UPDATE: **SOLD** Was $4200

This is a blend of CJ-3A and CJ-5.

“i have for sale a 1974 cj5 frame and running gear with a 232 straight 6 motor t90 3 speed trans, and a dana20 transfer case it has a 1951 cj3a body on it its an all steel reproduction body with almost no rust. only rust on it is on front of one fender. it has a new wiring harness from painless that has not been fully hooked up, rear lights and gauges are all thats left to hook up, all wires are there coiled up in front floor. only needs minor fixes to be a great jeep. runs and drives great 4×4 works fine high and low work fine. brakes work fine. has a springe over lift with new 36″ tires got this in a trade and just have no time to finish, my loss your gain. im asking 4200 but will consider trades and reasonable offers”


To Top

1950 CJ-3A St. Louis, Mo $1500


This is completely disassembled.  It just needs ‘alot of love’ according to the seller.

“i have a completely disassembled 1950cj3a willys it has a completely rebuilt f head motor that is stuck it was rebuilt never started and left sitting never to be turned over that was years ago but it still has alot of perfect parts that can be used it has the dana 25/27 axles the dana18 tranfer case and the double stick setup all still in good useable shape it will need new springs they are bad but i have them the tub has some rust but could be used now it does need gauges and of course alot of love but i’m selling it as a parts unit even though it does have a good title and the tags that go on it $1500 is cheap for all the parts that are here hell i even have all 4 steel wheels with it i don’t want to sell a part here or a part there i want it all or nothing so please keep that in mind and also the pictures are of it together it is now completely apart and i mean completely also the pto unit and that stupid tin roof are gone thank you.”


To Top

1948 CJ-2A? Sedalia, Mo $2000


No pics.  The motor is out.

“This is a STEAL!! We currently have the motor out of it but with it in, it is worth $6000. It would be a great investment and hobby. Email me if you have any questions.”

To Top

1960 Wagon Sparta, Wi **SOLD**

• CATEGORIES: Willys Wagons • TAGS: .

UPDATE: Status Unknown. Was $2750.

The seller notes there’s rust, but I can’t see much on the pics.  It’s almost ready for the road, but the seller doesn’t mention what it needs. (thanks Robert!)

“1960 Willys 4X4 wagon with original continental ‘226’ 6 cyl engine, 3 spd high an low. Optional lock outs, snow plow and p.t.o. winch. The engine is an excellent factory rebuilt. Body has usual midwest rust with amateur patchs and paint. It drove excellent, but had a click in reverse. I pulled cover off trans an discovered tooth out of reverse idler gear. Have parts to fix. No time this winter. Will offer as is for $2750. Body panels available, and restored these are bringing big bucks. Will consider storing until summer if paid for.”

To Top

1947 CJ-2A St. Charles, MO **SOLD**


UPDATE: **SOLD** Was $2500

(08/09/09)  “Rebuilt 134 L-head and T-90 trans. good shape.”



To Top

1947 CJ-2A Wichita, KS **SOLD**


UPDATE: **SOLD** Was $1950.

It needs assembly, brakes plumbed, wiring .. it’s still a project.

“I have lost interest in my project and I am looking to go another direction. Up for sale. 1947 Willy’s CJ2a. Frame/wheel base lenghtened to 100. Waggy-Dana 44 front and rear. Triangulated three link rear with coils and Ballistic 1-1/4″ joints. Waggy front springs SOA.Fuel injected 302/toploader four speed/Dana 18 transfer. Body just had some replacement panels, but still has some rust to repair if you want a trailer queen.  Frame boxed.  Just needs some assymbly/brakes plumbed/wiring and misc.”

To Top

1949 Jeepster Vail, Co $2800

• CATEGORIES: Jeepster • TAGS: .

This looks clean and solid.

“1949 WILLYS OVERLAND JEEPSTER FOR SALE. I spent years looking for the right one to restore, but now I have to let it go. My loss is your gain! Call 520-940-3132”

To Top

Year? MB Ventura, Ca $1200


The seller will take less it sounds like.  The motor isn’t stock.

“I have a 1940’s WWII era Willy’s Jeep that I got with the intentions of restoring but I do not have the time nor money to take on a project like this right now. Send me an email or give me a call (805) 905-1299 if you want to know more or would like to come take a look at it. Make me an offer and it could be yours. Thanks.”

To Top

1948 CJ-2A Maple Valley, WA **SOLD**


UPDATE: **SOLD** Was Make Offer.

This project includes an overdrive, so this might become a good deal.

“48 Willys CJ2A,44 rear,11″ drum brakes,T-90,Dana 18,Warn Overdrive,5:38 gears,289,lots of misc. parts not shown in pics .$ Best Offer.”

To Top

2 15×8 Hurricane Rims Clackamas County, Or $250

• CATEGORIES: Tires and Rims

Here’s a couple nice rims.

“Pair of 15×8.5 Mag Wheels.  Bolt pattern 5 lug 5 and 1/2 inch spaceing (Fit Jeeps, Dodge, and Ford, 4×4 etc).  Price $250 Cash for TWO Wheels.”

To Top

1946 CJ-2A Lowell, Mi **SOLD**


UPDATE: **SOLD** Was $2500

(01/12/2010) I’m guessing this has some cammo paint.  It appears solid from what I can see.

“For sale is my 46 willys CJ2A Jeep Has a 230 V6 with headers and a cam Full Cage and tons of extra parts I have owned this Jeep since I was 18 but its time for something new. May trade for 4×4 chevt truck”

To Top

2 CJ-6s Kingston, NY **SOLD**


UPDATE: **SOLD** Was $2500.

For some odd reason, it appears a bear mistook the top jeep for a salmon and bit a huge chunk out of the passenger side of the jeep?!?  The seller of this operates a jeep salvage yard in Kingston, NY. The bottom jeep looks in decent, stock shape.

“Asking$2500.00 for the pair”


To Top

1948 CJ-2A Nantucket, Ma eBay


It appears someone had some M-38 parts they added to make this more M-38like.

“1948 CJ2A. Runs great. Mechanically sound. Garaged. Restored body. Engine original. Mileage unknown. No top.”

View all the pics on eBay

To Top

1954 CJ-3B Coos Bay, Or $4900


UPDATE:  Price dropped to $4900

(12/25/09) I’m not sure why someone would use a GPW frame on a build like this?

“new body on ford jeep frame thats been boxed in and beefed up. has a fresh chevy 350 with cam intake carb and a few more things. has a for toploader 4 speed with advace adapters kit and dana 20 transfercase. has narrowed up 3/4 ton running gear. has a 4in lift and sring over lift clears 38’s. has 36 in irok radials ont it right now runs great and drives great has power brakes and hydralic throw out bearing for easy pushing has a stage 3 center force clutch. and lots more needs a paint job and some wiring body is almost perfect shape way to much to list lots invested call for more info 541-290-9969 $5500 obo or will take part trade for a late 70’s ford regular cab 4×4 or early to mid 90’s dodge with cumins parts or whole wrecked or not”


To Top

Drag Jeep Valley Springs, Ca $5000

• CATEGORIES: Racing • TAGS: , .

UPDATE:  Price dropped to $5000

(12/19/09) It’s not much of a jeep, but it’s likely fast!

“Completly Custom. Tube frame w/ fiberglass body. Narrowed Ford 9″ rear end, 4-11 gears. Summers Bros Axles. Austin 4 link w/ adj coil overs, 5 gal fuel cell, 1/2″ braided fuel line, Edelbrock elec fuel pump & reg, auto meter guages, MSD Dist w/ 6 AL box. 358 Chevy w/142 Weinad polished blower, 25% overdriven, 850 Holley, Steel crank, 292 Comp Solid Cam & triple valve springs w/comp.  Roller Tip Rockers, 9.5-1 pistons, Morso elec water pump. 350 Turbo w/ 2500 B&M stall converter, 36″ Austin Tubs w/12.32-15 Firestones, 110” Wheel base.
Would make great Sand Dragger or Strip Car. TURN KEY. Won 1st place @ Joey Grosse Racing Auto Show 2008, Lodi Calif.”