To Top

1963 CJ-3B Lawrenceburg, TN **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was on eBay.

Here’s an ex-Forest Service jeep with plenty of original extras.

“1963 Willys CJ3B U.S.F.S. Jeep for sale. This unit underwent a very expensive rebuild down to the last nut and bolt during 2006-2007. Since then it has lived in our dry garage with a soft cover on it. It has about 540 miles on it and used on sunnydays, a few weddings, parades, crusing the Nathez Trace, etc. I just uncovered it, cranked it up and drove out in the yard and snapped these pictures.If you are a Willys person you can see the care that was taken in putting this unit back into service. The color is 1962 willys cerulean blue with correct seats and covers. We have a rear passenger seat not shown that goes with it. The new sheet metal is from Willys Overland in Toledo, OH. All mechanicals are remanufactured by professionals, no patching, period. In addition to the standard equipment: F-134 Hurricane Engine, 3 spd transnsmission, 2 speed transfer case, original 1962 lock-out front hubs, 16” willys steel wheels. The goverment agencies added from the Willys Dealer on this one: Belt Driven Variable Speed Engine Governor, Rear P.T.O. Drive for Implements, Front P.T.O. Drive for the Keonig King Winch with plasma rope, Warn Over Drive for Highway travel, Fuel Pump with Vacuum Motor to operate 2 Windshield Wipers, F-3 Engine Oil Cleaner, Spartan Self Cancelling Turn Signals and more. Everything is as it should be. We prefer an alternator to insure reliability. The jeep is very quiet, and safe. If you want to built a rust free “new” willys you will spend double the price of this one. If you want to go on fun Jeep Rides and be the talk of any car show, it is available. Look on www.cj3bpage.com and go to 1962 owners. It is feautured there with another write-up and more pictures.”

 
To Top

A Cold Winter!

• CATEGORIES: CJ-2A, Features This site contains affiliate links for which I may be compensated.

This frigid CJ-2A suffered through consecutive days in the 20s in Columbia, South Carolina, this winter.  It was snapped on January 7, 2010 and published at wunderground.com.

 
To Top

1953 M-38A1 Sonora, CA **SOLD**

• CATEGORIES: M-38A1 This site contains affiliate links for which I may be compensated.

UPDATE: Was $2500. **SOLD**

“1953 Willy M38A1 For Sale, Original rims included. $2500.00”

 
To Top

1950 CJ-3A Aromas, Ca **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

This jeep has wood parts? And what is sticking out the front grille?  The rear corners on this look a little sharp.

“I have a 1950 willys jeep with some wood parts that I need to sale that has about $2,000.00 to pay it off.
The jeep is in Aromas ca. for showing and a must see on why it turns heads when driving it.
The body of the jeep is in great shape with new seats roll cage newer engine 4×4 works tranny very strong tires have low miles on them and are in great shape.
The jeep has all ways been stored inside.
would take $2500.00 cash in hand obo
Good luck and thanks for looking.”

 
To Top

1947 CJ-2A Racine, Wi $2500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

It looks like the driver’s side entrance might have been trimmed.

“1947 Willys Jeep
In excellent running order
Has original 134 cubic inch Go-Devil flathead four cylinder engine and the three-speed Borg-Warner T-90 manual transmission runs and shifts great
4wd lots of new parts under hood
starts right up
is in great cond. for the year
keep in mind this truck is a 1947 and is in great condition and stored inside, but it does have normal signs of its age
$2500 OBO!!! call 262–321-940seven ”

http://racine.craigslist.org/cto/2320397849.html

 
To Top

1943? CJ-2A Deadwood, SD **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $275

(07/01/2010) Here’s a parts vehicle.

“1943? WW2 willys jeep. fenders are in the back and the original ww2 grill.rust on the front floor boards. I have seen alot worse. has six cylinder Ford motor in it. stuck. spare parts in tool box. has driver seat only.”

 
To Top

1946 CJ-2A Boston, Ma $1900

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

It runs and drives.  Might not be a bad price if the body is decent.

“1946 CJ2A… Rebuilt motor runs great. Minimal rust. Clutch needs some TLC among other things. Have wind screen. Asking $1,900 or best offer. Located in Massachusetts. Call Andy… nine seven eight. two five seven. nine six four one.”

http://boston.craigslist.org/gbs/cto/2321054759.html

 
To Top

Year? M-38 Houston, Tx $3500

• CATEGORIES: M-38 • TAGS: This site contains affiliate links for which I may be compensated.

This is inaccurately labeled a 1946.

“Great condition!!! Everything rebuilt and in excellent running condition. Perfect deer lease jeep!!!”

http://houston.craigslist.org/cto/2321071783.html

 
To Top

1949 CJ-3A Berryton, Ks **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $650.

(01/03/2011) “1949 Willys Jeep, needs complete restoration.”


 
To Top

1946 VEC CJ-2A Cleveland, Oh **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $29,000.

(11/30/2010) Bob spotted this really nice original restoration.  I’d like to see some better pics.  I also really like the color scheme.  I do have a couple minor, really minor detail questions pertaining to originality.  Wouldn’t the bezels have been painting the body paint color (though I think they look better in black)? Also, wouldn’t the rear bumper have had the dropped PTO connector angle (though I like the looks of the bumper that was installed on this)?

“Early production column-shift model 20670.
Ground-up restoration to original condition. The jeep has the original 134 cid in line 4-cylinder engine, column-shift T90 3-speed manual transmission and transfer case. Every piece on this classic Jeep has been disassembled, media blasted and rebuild, reconditioned, or replaced to achieve its as new condition. This Willys has been finished in the correct Harvest Tan color with the corresponding orange wheels. ”

 
To Top

1954 CJ-3B Lufkin, TX **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD**  Was 800.

(01/03/2011) Real rough but really runs.

“1954 willys jeep 4×4, 4 cyl. F-head, overhead valves, runs good, 4 wheel drive works good, no brakes, headlights work, windshield has hole busted in it, just an old jeep with typical maintenence needed, could use some new points, plugs etc, had it on my deerlease for yrs, replaced with 4 wheelers, need to sell it,has hi and low range with 3 spd tranny, tires has decent tread but dry rotted, good enough for off roading though, gas tank is a “6 gallon boat tank” sitting in the back, make a good deer lease or farm/ranch vehicle, no title, might be able to track it down though, i dont know, selling as is, will start and drive onto your trailer, remember “no brakes” lol, thanks for looking. Location is Lufkin Tx, about 120 miles north of houston and 80 miles south of tyler tx”

 
To Top

Pounced: Biscuit Finally Has Its Name

• CATEGORIES: Biscuit, Features, How To This site contains affiliate links for which I may be compensated.

It was sometime around mid-summer of last year (maybe earlier) when I started the project to place ‘Lost Biscuit’ on the hood of my jeep. It took a little longer than expected, but I finally did it.
First I had to decide which font to use. Fortunately,  I got some very helpful input along the way from Dexter (thanks) and eventually decided upon the Marker Felt font. Okay, that was pretty easy.

Now, how to get the name on the hood. After hmming and haaaing over how I wanted to attach the name (hand drawn, stickers, stencils, pay someone else … ), I finally decided I would do it myself using paint.  But, I knew my freehand drawing and painting skills froze around the 2nd grade, so this wasn’t something I could improvise. Since I had no immediate solutions, I decided to put the project on hold (which explains the delay).

One day this past December I was watching American Restoration on the History Channel.  The American Restoration show is a spinoff of sorts from the Pawn Stars show and follows various restoration projects from Ricks Restoration out of Las Vegas.  In one of the episodes, called Buttered Up (you can view it here), Rick restores an old popcorn machine.

To repaint the front of the popcorn machine, the painter used a technique that dates back centuries called pouncing. Pouncing? My ears perked up!

Pouncing?  Never heard of that. As usual, my computer was on my lap so I instantly googled pouncing.  I learned,

Pouncing is where pounce — loose graphite or charcoal — is rubbed through a series of small holes punched in a paper pattern to transfer the design to an item to be decorated

Well, I thought that would work for Biscuit’s name.  After some more research, I found out that quilters use pouncing for some stitch patterns.  So, the next day I hit some quilt stores.  As you can imagine, the conversation went something like this,

“Hi, I’m here because I want to paint a name on my jeep,” says I.

Blank stare from cashier, “what do you need?”

“I need stuff for pouncing” says I, remembering now that I probably had not shaved, maybe, not even showered, and most likely wasn’t quite dressed like customers they normally help (however, to my credit, I didn’t have on my garage jeans).

Another blank stare, “you want to do what?” I think she even had her finger ready to dial ‘9’ (and then ‘1’ ‘1’)

It turns out, not everyone knows what pouncing is, even at the quilt stores.  Eventually, after visiting a couple quilt stores, I found what I needed (you will see my pouncing supplies in a picture below).

Here’s the synopsis of this project.

1. Design and Print the template.  Then, since I didn’t have a good awl, I created my own awl out of tape, a chopstick and a long push pin.

2. Next, I attached the template to a piece of cardboard.  Then, I poked holes around the outer edge of all the letters.

3. With the letters outlined, I tested out the template on different materials to make sure it worked.  It turns out pouncing is pretty easy!

4. Selecting paint was the next step. So, I visited my local art supply store and explained to them what I wanted.  They directed me to an Acrylic Titanium White Tube from Windsor Newton. Along with the paint, they also suggested an acrylic spray on sealer and finisher from Americana. I took the paint home and tested it on different materials.  At first, I didn’t like it, because it wasn’t as smooth as the typical oil based house paint I had expected.  Instead, it had texture like a canvas artist would want.  But then, after staring at it a bit, I warmed to the texture, because it gave the name a hand generated feel.

5.  Yesterday, with the weather a little warmer, it was time to paint the name.  I got out my template, my paint, and my pouncing supplies.  I taped the template to the hood and prepared to pounce.

Over the course of my tests, the technique I found most successful for pouncing was not tapping the pouncer, but rather dragging it slowly across the holes.  This kept the paper from popping up and blurring the dots underneath.

The pouncing equipment consists of a pouncer with a ‘handle’ on one side and a soft side on the other.  There’s also a plastic container that can hold pounce.  Lastly, there is the white chalk.

6.  Now it’s time to paint.  I put three coats on each side. This image was taken after the first coat.

This is after three coats.

There is still some small edges that need cleaning up.  Once I do that, I’ll spray it and hopefully that will protect it!

 
To Top

1947 CJ-2A heater $1000 … yes, really!

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

I thought this was worth a laugh.  Yeah, the price is $1000!

“I have an original 1947 willys heater that i want to sell. i was told its worth a thousand dollars. any questions please email me”

http://phoenix.craigslist.org/cph/pts/2318768400.html

 
To Top

1942 GPW Westminster, CO **SOLD**

• CATEGORIES: GPW (Ford MB) • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1900

This has a fiberglass body.

“My loss is your gain!!!!! To many projects not enough time time for this to go. Use the parts on your jeep or finish this one. No title bill of sale only File folder of receipts and GPW literature.

1942 Willy’s/Ford GPW frame sand blasted repaired and quick black epoxy spray job
GPW Grill, headlights and hood (classic look)
Kevlar/fiberglass Shell Vally Tub and fender (ok Shape) Some holes miss drilled on the interior
2 Blow molded racing tub seats and covers
full Roll bar 90% done
New single piece windshield frame and the original 3 piece frame needs work
Go Devil 4 Engine runs great new Carburetor and gaskets, Re-cored radiator, Centech wiring harness, Saginaw steering conversion,
New transmission, rebuilt transfer case,
New Warn Premium Hubs,
New steering knuckles-kingpins and seals.
New 11″ drum brake conversion, and master cylinder
New Rancho springs and shocks, Con-Fer shackles
Rebuilt drive shafts
Set of 5 Autometer gauges”

 
To Top

Year? CJ-3A Eastern Oregon, $500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Includes a rear PTO.  No pics provided.

“For sale is a Willys CJ-3A jeep. No title, no motor. Body is fair, frame is pretty good. No seats. I was going to rebuild it, but, too many projects “on the fire”,,, I also have a bunch of Willys parts for sale, including flat head motor,(would work in this CJ-3A) rear PTO, body parts (for CJ-2A and CJ-3A, and a few CJ-5), small parts, seat frames, parts for a M-38A1, a fully rebuilt flat head motor, small parts, gas tanks, gauges, rear draw bars, roll bars,,, Love to sell it all as a package.. I am also planning on selling some restored CJ-5’s in time. Thanks !”

http://boise.craigslist.org/cto/2318266866.html

 
To Top

1955 CJ-5 Rockford, Il **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: ** SOLD**A reader named Mark purchased this  rig.

This seller must sell.  There’s some value here.  I can’t tell whether it is a CJ-5 or M-38A1.

“This jeep is a 2 owner. My neighbor used it for 50 yrs to plow the Court House but got sick and didn’t have a chance to restore it cause he died . He wanted me to have it but I’ve got to go to Phoenix for a heart surgery myself so I’m forced to sell. We ran a rubber gas line into a gas can and jumped the starter and it fired right up and we drove it home. It needs some TLC but did come with a plow and its a project that can pay for its self. It needs body work. I really would love to keep it and pull it behind my motor-home but cant. I have additional pics if interested. I really don’t want to part it out and would like to know it restored. I haven’t changed the title over cause its the oldest title Ive ever seen. ”

 
To Top

1960 CJ-5 Franklin, NH **SOLD**

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

This looks in good condition.

“I’m selling my 1960 Jeep CJ-5. It is a 4 cylinder 3 speed stick and has the twin stick transfer case. It runs well, drives well, all the lights work, 4×4 works great, no heater, no radio… New seats, new windshield frame, new 31″ tires, top was replaced a few years ago… very solid Jeep. This is an old Jeep, which means no power steering, no power brakes, it is pretty much a tractor with a top lol. It cruises at 50 mph all day long and thats about top speed for these old beauties. The Jeep is not perfect but is well worth my asking price of $2000 drive it home send me an email or text me at 6o3 995. 9378 Nate”

 
To Top

1953 CJ-3B Arlington, Fl **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Was $3000. **SOLD**

This might make a good project.

‘1953 Jeep CJ-3b
This Jeep is very original. It was purchased by me in Western NC from a man who purchased from the original owner. It was a farm Jeep and has very low mileage considering its age. I looked at 12 other 52-53 Jeeps before I decided to buy this one.

This is why I chose this Jeep:
The bad stuff:
typical rust, but not tons of it- most panels can be fixed easily as everything is flat
no top, but it does have the top frame, and one door
brakes need to be adjusted- the rear wheels lock up under heavy braking
the carb is new but it floods easily- I suspect the needle and seat assembly-some fuel lines need to be rerouted
typical decay of the original wiring harness
needs muffler welded on (I have a muffler)
brake lights are non-original and not working
seats need to be recovered

The good stuff:
it is 99% original
low miles 45K
the motor runs great
the differential works great
the tranny works great
the steering gear works great
the frame is solid
the tires are brand new (have receipt)
wheels were shot peened and painted with urethane (have receipt)
new front window (have receipt)
just about every part imaginable is available with a mouse click or a phone call
it just looks cool

I am selling this , because I have way too many projects , and this would be a great and easy project for someone. I have over $3000 in the Jeep. I will accept reasonable offers. I do not want any trades, as I do not need a divorce. Payment will need to be in cash.
( I am also selling a 1994 Jeep YJ with a 258, ps, pb, Sahara package, new sailcloth top, AM-FM CD, 7″ total lift on good BFG 33’s, Motorcraft 2100 carb swap–needs tuning, needs some work on the CAD front axle actuator as the vacuum nipple broke off $4 part—the paint is very nice with very little rust–witha few more dollars this could be a really nice Jeep—–$4200–I have $5600 in the Jeep—I’ll post pictures soon)”

 
To Top

Parting out 1946 CJ-2A Ramona, Ca

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Some parts have been sold.  This was a column shift.

very very clean and running all original except taillights and one knob on shifter ,6 volt motor runs perfect and i have video of it driving,3 on the tree short lived option im keeping the tub ,front clip ,and wind shield,this is a civillian modelcall me at 619-813-6073 thanks not m38

engine block transmission seats columne shifter have been sold still have alot of engine accessories and misc snow chains ect call for availability

http://sandiego.craigslist.org/csd/pts/2316155280.html

 
To Top

1942 GPW Tipton County, Tn **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE:  I believe this has sold.

Does not run.

“Antique Ford Jeep with the Ford script on tailgate. Motor does not run. Ready for restoration and I don’t have the time.”

 
To Top

1942 GPW Canoga Park, CA **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1300

(03/28/2011) This might be a good price.  It sounds like it runs and drive.

“for sale is this 1942 ford willy. i my self havent taken it offroading. i can tell you a few things though, it has headers, a buick v6 engine, and it starts and sounds strong. new battery. the car has been sitting for quite awhile so i would recommend a good run through to make sure everything is good. i have no time for it. it the perfect car for offroading. better than taking 10k dollar jeep out and getting it all scratched. give me a call for info or to come out and see it.”

 

 
To Top

1947 CJ-2A Braddock Hills, Pa $2000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

PDATE:  Price dropped to $2000

(04/08/2011) There’s still some work left on this project.

“1947 Willys CJ2A
This project is almost complete.
Mechanically this is in great shape. The engine transmission transfer case and differentials are all in great working order. The brake system is rebuilt and they work great. This cj has the original flat head 4 cyl motor and is still 6 volt.
What needs finished is the cj needs painted and re-assembled.”

http://pittsburgh.craigslist.org/cto/2317986465.html

 
To Top

1954 CJ-3B Mesa, AZ **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2400.

This might be a good price.

“4 cyl, 3 speed, New Wiring, New Tires, Orignal Rear Seat, 99% Rust Free, No Floor Rust at all.”

 

 
To Top

1950 CJ-3A Yakima, WA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

The seller wants to make a trade.

“I am selling or would like to trade for a car or rv the jeep has a f134 motor in it a t90 trans t18 t case 538 gears and a 8000 pound winch runs great. for more info please email me with pics of the trade and info”

 
To Top

1946 CJ-2A Boise, ID **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $8000

(02/07/2011) This appears in good shape, though there is a spot of some kind on the hood.

“I have 1946 willys really good shape will trade for vette or mustang 65 years old lol every day driver.”