To Top

1946 CJ-2A Rice Lake, Wi eBay


Brian found this unique ’46 on eBay. No doubt there’s a certain personal touch to this CJ-2A.

“For sale I have a 1946 Willys CJ2A Jeep. It runs good, all 4 WD works properly. It needs rear brake drum installed, I have the drum. It has all new brake shoes and wheel cylinders, duel rear wheels needs wiring work for lights to all work. The jeep was my dads he had it since 1962 it was always kept in the garage. The body is in pretty good shape for a 46. It was painted in 1995 and it had floor patches welded in 5 years ago. The snow plow, hydrolic up and down manual left and right. I just put in a new interstate battery. It was converted to a 12v system. Thanks for looking, ask any and all questions. The jeep is for sale locally, I can stop the auction at any time!!!!!”

View all the pics on eBay

To Top

Rusty FC-170 Garden City, Mo $500 obo

• CATEGORIES: FC150-FC170-M677

This is a parts FC-170.

“Last time on this one. Antique jeep fc 170 very nearly complete. Taking the torch to it very soon.$500. o.b.o.”

To Top

1961 FC-170 Modesto, Ca **SOLD**

• CATEGORIES: FC150-FC170-M677

UPDATE: This sold.  Thanks Alan!

The ad says this is a must look, however it still looks rusty at the edges to me.


To Top

No Year FC-170 Wenatchee, Wa $1000

• CATEGORIES: FC150-FC170-M677

This is one of the cheaper FC’s I’ve seen — It’s a project.

“No title, needs lots of work. No transmission or transfercase. Engine does not run. These are rare. Will trade for guns, gas station items or other interesting items.”

To Top

1944 GPW Granite Falls, Wa $2500


This appears to be a very restorable GPW.  If you are serious about getting a GPW, this one is worth a look.

“This is an original Ford GPW WWII jeep from 1944. It is a pretty rough project but does have a lot going for it.
original Ford engine not running but not seized. Engine and frame numbers match!! (as they should on ford jeeps). Original gearbox and transfer case. 3 combat rims. Call for more details if interested. Jason (360)691-7740”

To Top

1958 Flatfender Rockclimber Spanaway, Wa $6000


UPDATE:  Price is now $6000.

Looks like there’s been some time and money put into this rock climbing flatfender.

“58 willys flatfender it has a chevy 350,sm420 tranny, dana 44 axles with 538 gearing and detroit lockers,38″ bogger tires,4wheel disc brakes,8000lb warn winch,propane injection fuel system, custom roll cage,raceing bucket seats…comes with double axle car trailer…6,000 obo call ted @ 253-832-0728 ”

To Top

1946 CJ-2A Bay Area, Ca $3500


An olds V6? It’s so uncommon, that I had to look up the engine to learn more about it. According to Wikipedia, a version of the Buick 231 or 3800L was used between 1975-1980 in the Starfire GT. The only difference I can see is that the alternator is on the driver’s side rather than the passenger side. I’m not sure where the powersteering pump is located.

“Nice running flat fender Willys CJ2A. Olds V6 w/recent valve job. Headers. Stock transfer and trans. P/S, manual brakes. New battery and alternator. 12 volt conversion. Rebuilt carb, master cyl. All new brakes. Tires are fair, with matching new spare (not shown). High lift jack. Roll cage. Soft top with doors. (not shown). Gas tank relocated under rear deck. Stock tank removed but included. Tow bar. Oversized radiator. Warn winch included but not mounted. (Had been mounted so all holes are there). Old AM/FM/Cassette, No Speakers mounted. Old CB. 408-988-0668 M-F. 8:00-4:30”

To Top

Sand Jeep, Vancouver, Wa

• CATEGORIES: CJ-2A, CJ-3A, Racing • TAGS: .

UPDATE:  Price is now $1500

This jeep sports the same seats (driver’s seat and rear passenger seat) that I have.  I could use those seat covers!

“set up for sand, 2wd dana 44 with 5.13 gears and a spool, ladder bars, 400 small block with 2.05 valve heads, screw in studs, guide plates and port work, roller rockers, aluminum intake, holley carb, th350 thrans with shift kit and 3500 stall, auto meter gauges, has been sitting for a long time and needs carb rebuilt and a few other things to run. $1500 obo or $800 with out motor and trans”

To Top

1975 CJ-5 Shelton, Wa $2995


This trail jeep seems reasonably priced.

“Selling my trail rig. It is street legal but I trailer it around. It has a built 360, T15/D20, d44/d30 locked in rear, New custom drivelines, 5in of lift (used to be S.O. w/36’s I lowered it back down) 33″ wildcats with spare. 10klb Warn winch with remote, Cd player, Full roll cage, I have the soft top for it, but it needs a little sewing work done (its all there though). It has all the lighting you will ever need, Engine runs at about 80-90psi oil presure. Oversized radiator means it never overheats on the trail. The is an awsome trail jeep. I just dont have time to use it anymore…. Les T. 253-905-5500”

To Top

1950 M-38 Bonney Lake, WA **SOLD**


UPDATE: **SOLD** Was $4000

This is jeep is a collection of various parts.  Perhaps the whole is greater than the sum of the parts.

“1950 Willys M-38 Flatfender Jeep, Buick 231 V-6, 400 Turbo auto trans, Dana 20 T/C. Centered Dana 44 rear end. Dana 30 front 3.73 gears. Tub is virtually rust free. On a DJ-5 frame, rides and drives like a new Jeep, just needs you to pick a color and paint it. “

To Top

1947 CJ-2A Orting, WA **SOLD**


UPDATE **SOLD** Was $800.

“this is a unfinished project. has new ps box mount fabed 1976-86 cj springs front axle pushed forward 2 inches for tires room stainless steel dash and lots lots more. dana 60 5 lug rear unfinished 44 front or toyota axles front and rear you pick also many other parts clear title”

To Top

1960s FC-150 Central, Or $2500

• CATEGORIES: FC150-FC170-M677

This started out at $3500, but the price has dropped to $2500.  There’s definitately some rust on this one.

“Early 60’s foreward control Jeep.Been in a barn for 5 years. Got it started and drove it around. Engine is great, trans and transfer work ok. Brakes need bled but work. Driver and passenger floorboards need repair, but usable.Rear cab corners rusted but small enough to repair with fibreglass i think. Beds rusty and there is surface rust.Great ranch vehicles with very little wwork. Last one I saw for sale on e bay that was similar to this they were asking $3500 and it didn’t run. Asking $3500, but will listen to offers. Wife wants it gone. e mail or call Wes 541-504-7158”

To Top

1947 CJ-2A Kalama, Or $950


UPDATE: Price dropped to $950

The seller has added some additional images.  For $950, I think this is worth a look.

No engine. This is a good restorable jeep. t90 tranny and dana 18 transfercase work. Nice aluminum wheels. throw in a buick v6 and drive it. some hundreds of dollers in newer suspension work. Hate to sell it, but need cash.

To Top

1966 CJ-3B Westminster, CO **SOLD**


UPDATE: **SOLD** Was $1200.

Note the indents on the passenger side.  This is likely a reproduction body.  Seems like a pretty good price.


To Top

1962 CJ-3B Richland, Wa **SOLD**


UPDATE: **SOLD** Was $5000.

How about this great looking CJ-3B with only 32K miles.  Looks pretty stock.

“I have an original 1962 CJ3B with less than 32,000 miles on it. The paint has been touched up but is still sea foam green. Kelly hardtop side steps, there was some slight rust on the passenger floor brace which has been repaired. I have the original wheels and new 15 inch bias ply tires. This jeep also has the PTO winch installed as well as I have the PTO to Warn overdrive adapter by Herm the OD guy. (no overdrive) Can send photos. $5000 Washington State.”

To Top

1946 CJ-2A Spokane, WA **SOLD**


UPDATE: **SOLD** Was $2250.

Looks like it needs some work.  The price will likely drop some.

“1946 Willys Jeep CJ2A, same owner since 1971, was a farm Jeep, stock motor/trans., not butchered – great project. Runs and drives good, needs wiring/lights,top,other work. Some parts, stock 15” wheels included. Will trade/part trade for 2002 or newer Honda XR100R, CR250R, may consider other interesting Honda motorcycle. E-mail with phone # for more info. “

To Top

Builds — Vivek’s CJ-3B

• CATEGORIES: CJ-3B, Features

Vivek purchased a 1967 CJ-3B right hand drive Mahindra at the end of 2004.  According to his early blog notes, the jeep barely started, was missing the front drive line, and generally needed a lot of work.  When he finally did pick it up, on the way back it stalled, requiring the help of some local builders to move it out of the way of a bus.  Fast forward several years later and you can see Vivek and his CJ-3B pictured on the right.

Among Vivek’s challenges was his effort to get the papers.  Not only were the papers absent, but apparently the owner wanted to sell the jeep, but the owner’s son did not.  It took a few weeks before Vivek could get the original papers, insisting the owner drop the price slightly further for all the trouble the owner caused him.  You can read about the purchase here.

Learn more about Vivek’s recent engine rebuild, the jeep club he belongs to, and some recent jeeping pictures. Also, check out Vivek’s friend UBS and his one-of-a-kind jeep collection.

Vivek’s working for the next few months in Milipitas, California.  When he heads back in December, he hopes to take back a lift kit with him.  If anyone has any suggestions, comment below.

To Top

Builds — James’ Jeep is Painted


James sent me a pic of his recently painted flattie.  It looks great and, he write, he didn’t have to bondo it.

As I started looking a the image more closely, I realized that his jeep has reversed shackles on the front and outboarded 2 1/2 inch springs on the back.  Nice ….

You can see what it used to look like here.

To Top

My Build — Bump Stops


I seem to be in the middle of a variety projects at the moment.  I did finally solve my bump stop puzzle — that being how to mount them.  After much pondering, I finally decided to run bolts through the frame longways.

In the image to the right you can also see the setup for the suspension limiters, which I’ll add if/when I race it.  I haven’t purchased them yet, but you can see them here.

Tomorrow I’ll have a post about the electric fan solution I found on ebay.  I also hope to have a post ready on the external dual oil filter system I’ll be completing tomorrow.

To Top

1942 GPW Sacramento, Ca $3000


This GPW looks like it is in very good shape.  I’m surprised it isn’t gone priced at $3000.  The back seems like it sits a little high?  No description at all.

“Please leave a Email. I will get Back to you as soon as I can.  Thanks For Looking…”

To Top

1946 CJ-2A Oroville, CA **SOLD**


UPDATE: **SOLD** Was $2800

Since it’s been trailered, maybe the running gear’s in good shape?

“46 Willys flat fender, Buick V6, turbo 400 trans, power steering, tilt wheel, needs some work BEST OFFER, also have extra jeep parts”


To Top

1957 CJ-3B Mount Vernon, Wa $4300 obo


This CJ-3B’s body looks nice and straight.

“1957 Willys CJ3B Buick V-6 T-90 3 speed, F18 transfer case, rebuilt front axle, saginaw steering with tilt wheel, new 33 12.5 radial swampers, bumper mount swing tire carrier with reciever hitch, tow bar, new paint, needs some wiring dont have time to finish. $4,300.00 OBO call Joe at 360-422-7736 or 509-485-2238.”

To Top

Willys Mud Racing Jeep Lolo, Mt Make Offer


Some re-assembly likely required 🙂

“Mud Racing jeep with a small block Chevy. Make an offer and you can have it!!!Ran when parked about 5 years ago!!!! Call make an offer and its yours!!!!!!! 214-2834!!!!”

To Top

1952 CJ-3A Fargher Lake, Wa $2900


UPDATE:  Price now $2900

The Pontiac 195, also known as a Pontiac 194 and the ‘trophy 4’, is an interesting engine built between 1961-1963.  Apparently, it’s nearly as heavy as its 389 V8 cousin. That said, these were successfully modified for racing, including drag racing. While looking up the engine, I found the below jeep in several pictures on this website.

“1952 Willys CJ-3A with a Pontiac 195 (3.4l, half of a Pontiac 389 V8) slant 4 that runs great. New CJ-5 brakes/wheel cylinders, new battery, K&N air filter, Rancho 2 1/2 inch lift and shocks, 95% tread 31X10’s Federal All Terrains, new Besttop seats, good Besttop soft top, Smittybuilt XRC-8 Winch. I most of the receipts for the work. I will consider offers below 3000, but I will be keeping the winch.

To Top

1955 CJ-5 Shady Cove, Or $750 obo


There’s lots of value in this collection of parts.  It’s worth a look if you are putting updating a flat fender.

“’55 Willys “round fender” CJ-5, Buick V-6, Turbo 350, Dana 300,CJ7 disc brake axles, rancho springs, painless wiring harness, GM tilt column, tow bar, Advance Adaptors install kit for V-6 and trans, rolling chaisis is towable, needs assembly – $750.00 / OBO – Contact Jim @ 541-292-4623 or email – photos by email on request – Tnx”