UPDATE: **SOLD** Was $900

(01/22/2011) This is a project.  This seller also has a 1948 CJ-2A for sale.

“1948-49 CJ-3A Willys – $1200 (OBO Elk River) Here is a decent starting point for someone interested in building a vintage Willy’s Flat Fender Jeep with V6 power.

This CJ model featured the one piece style windshield which followed the CJ-2A. One photo below shows what it looked like when we got it. The baja tires/rims have been traded off for the traditional slotted 16” rims.

This jeep originally came from Washington State. We received this Willy’s CJ3A in trade. There is no title. There is bill of sale from the previous owner and you would receive that copy and a new one for this sale.

The previous owner acquired this with an odd fire 231 Dauntless V6 (included) & intended to repower it with a newer rebuilt Buick V6 (also included). The price includes both V6’s. The Advance Adapters V6 to T-90 transmission adapter & what appears to be the correct aluminum bell housing are included.

Transmission is a T-90 A-1 Borg Warner, mated to Spicer transfer case, front axle is Spicer 25 and rear axle is whatever original came in 48. Included are both drive shafts and a spare rear axle. I did not open the transmission or transfer case.

The frame was modified by the previous owner in the following ways: a custom front bumper was added, front frame reinforced and designed to accept a winch. A later, manual style, Saginaw steering box is mounted and works fine, V6 motor mounts are welded in as are repositioned radiator and battery mounts.

1972 era Jeep 11” brakes are fitted on the front axle, standard ones are on the back. I replaced the brake cylinders and shoes with new parts and the brake lines on the axles are new. I did not have any drum work done.

When I received it, I removed the tub, sand blasted the frame, painted it with Valspar Farm & Implement Black paint intended as a primer. I’ve worked some on the fenders, grill and hood. Seat frames & gas tank were repainted. The tub is rather rough but workable for someone who knows what they are doing.

We are moving and we need to reduce our number of vintage Willy’s projects. I can also provide you with a Photo CD of every picture I’ve taken regarding what work I’ve done so far.

I also have a complete, mostly original, restoration ready 1948 CJ2A with 12 volt conversion for sale.”

UPDATE:  The price on this has dropped to $2000.

“I have a 1946 jeep willys cj2a. It has a 3.7L Buick v6 and 32×11.5 super swamper sx with about 80% tred. It comes with power steering pump and box and another steering column as well as new leaf springs for the rear. it has a 3 inch sespention lift and 2 inch body. please call 425-749-6292 dylan”

http://seattle.craigslist.org/est/cto/2227311918.html

There looks like some value here.

“Here is a complete willys 47 cj2a. The body is shot but it has a good frame and drive train. It does come with a clear title and vin tag. Call 419-602-3343.”

http://toledo.craigslist.org/cto/2223201954.html

UPDATE: **SOLD** Was $450

(01/27/2011) This is a good looking rolling chassis for the price.

“1948 willys with ’42 grill. Just a rolling chasie. No motor or transmission. Good wheeling project. Have title.”

UPDATE:  Still Available.  Now more complete (see pics on craigslist)

(10/11/2010) This looks like a restoration that is almost finished.  It appears a good deal of time and money has been put into it.

“1946 WILLYS JEEP; 4-L-134 REBUILT MOTOR; SALE FOR $4.600. CALL760-884-7554. The Pictures of the Willys are during it’s restoration. Call to see it now. ”

http://sandiego.craigslist.org/nsd/cto/2220661452.html

UPDATE:  This sold quickly.  Was listed at $750.

This has seen some changes.  That looks like a MB windshield.

“Here is a 1953 ? willys Jeep and chassis with a Dodge V-8 318 and automatic tranny mounted in it. also a dodge dakota power brake booster and master cylinder. Willys is mostly complete. has the DUAL FUEL TANKS 1 under driver seat and 1 under passenger seat. has fold down windshield ALONG with the ALUMINUM TOP AND DOORS with another windshield. this has a 3 INCH body lift also…. What you see is what you get. AWESOME sand buggy project or sand rail 4×4 willys so this is a great CHEAP project. BILL OF SALE ONLY………..dont miss out on this good project. also has extra hood with a hole in it to…. thank you and any questions email me :)”

UPDATE: **SOLD** Was $1100

(01/11/2011) It looks like a project.

“Great project for a crawler or mud truck. The engine is a Chevy 327 high rise intake chrome valve covers/ water pump/ and drive pulleys (needs to be droped in). will Motivated seller need to get rid of soon so make an offer and we’ll go from there.”