To Top

1944 MB Paradise, CA **SOLD**


UPDATE: **SOLD** Was $3500.

This looks in good shape.

“1944 militry jeep willys.3.1 v/6 odd fire.custom radiator,rollbar. all the rest is original.licenced and ready to go hunting,fishing or just out for some good old fashion fun.Comes with tow bar and hooks up easlly.Has reciepts for rebuilt trans with new custom clutch and rebuilt rear end.Climbs like a goot and pulls like a train”


To Top

PNW Race Jeep Selah, WA **SOLD**

• CATEGORIES: Racing • TAGS: .

UPDATE: **SOLD** Was $2000

The motor needs work, but the price still looks decent.

“1948 willy’s race jeep has a1966-77 bronco frame, motor, tranny, and running gear, 400hp 289-302, motor needs work, full cage, 5 point harness,tilt fiber glass hood and fenders, $2000 firm call (509)697-8209 ask for Tom or will trade for equal value quad. also has a12 gal fuel cell.”


To Top

Roll Cage Draper, Ut $300


It’s a good price for a cage.  That front seat part looks pretty far forward though.

“I have for sale a custom built full roll cage for a Willys Jeep. This will fit the CJ2A, CJ3A, or M38. It incorporates the seat mounts for optimum safety as well. This is a very nice cage for a fraction of what it costs to build. Please call with any questions. (801) 403-8511, and ask for Kurt.”


To Top

1948 CJ-2A Denver, CO **SOLD**


UPDATE: **SOLD** Was $4200

Last posted 02/04/09

“Nice original condition 1948 Jeep Willys. Original VIN Plate on firewall, Good title. Garage kept. Good condition. Original 4 cylinder “Go Devil” engine. Original drive line with good engine, transmission, T-case. etc… Nice Blue paint approx 10 years old. Original 6 volt system. No rust. Very good body. New windshield frame, seat frames and Beechcraft seat cushions w/ rear seat. NDT tires on 16″ wheels. Includes tow bar and rear tow hitch. I bought it 3 years ago as a project and but have not found time for it. Needs minor work to complete. Parts included but not installed include new windshield cowl, glass, insall kit; new seats, cushions, seat belts. Great father/ son project.”



To Top

1951 CJ-3A Selah, WA **SOLD**


UPDATE: **SOLD** Was $3000. 

(10/11/09) This is looks ready for the trails.



To Top

1948 CJ-2A (fiberglass) Kooskia, Idaho **SOLD**


UPDATE:  **SOLD** Was $2000

(08/26/09) This package would be interesting to examine.  It includes an overdrive.

“Project, I started a frame of restoration/build up, over $7,000 invested. Just a few mods like munci 4 sps. trans with warn overdrive, 11″ new brakes, new Rancho 2″ springs and custom shackles, new fiberglass body ( minus hood ).. and many more ”


To Top

1949 CJ-3A Lyons, Ne **SOLD**


UPDATE:  **SOLD** Was $6000.

(07/03/09) It looks pretty good.

“1949 Model- CJ-3A. 2 door, New body & paint (yellow), mechanically sound.Comp restore, new trans, new fuel pump. Vehicle located in Lyons, NE.”


To Top

1952 Wagon Red Bluff, CA **SOLD**

• CATEGORIES: Willys Wagons • TAGS: , .

1952_wagon_redbluffUPDATE:  **SOLD** Was  $2400

“Parade special, 1952 willys wagon, current registration, recent upholstery, new paint, tires, stock running gear, locking front hubs, all in good running condition. ( 2400- O B O )”

To Top

No updates tonight


No updates tonight.  Enjoy Halloween and set your clocks back!

To Top

Just in time for Halloween

• CATEGORIES: CJ-2A, Unusual

I love the comment by the seller of this frankenstinien vehicle: “unique cab style”.

“1948 Willys Jeep CJ2 in non running condition. Could restore or make a parts Jeep. Odometer shows 26626 miles, true milage unknown by me. I purchased as a project and never did get to it. Body and frame seem decent, the floor of the rear area is rusted through as seen in picture. Unique cab style. Has 540 PTO on rear.  I do have the seat frame for it but not upholstered. Will have to be hauled or trailored. I live near Dixon IL 61021. Can either use PayPal or pay cash when picked up.”

View all the pics on eBay


To Top

Idahoan looking for snowplow for his jeep

• CATEGORIES: wanted

Snow Plow wanted:

“I am looking or a good snow plow to mount onto a 1956 willys jeep.”

To Top

1947 CJ-2A Benton City, Wa **SOLD**


UPDATE: **SOLD** Was $3500.

The seller needs to sell ASAP.  Make Offer.

“1947 willys cj2a flat finder, restored, in very nice shape no rust paint is good, almost new top with soft doors, all stock and original running gear with hurricane 4 cylinder, manual trans with stock t-case runs and drives awsome, good tires spare gas cans, good best top seats and back seat, original dash with steering column, 3500obo make me a offer need to sell asap.”


To Top

1950 CJ-3A Tulsa, OK eBay


It looks like there’s been some changes to the floor boards — probably rusted out and were replaced.

“We are selling our 1950 CJ-3A.  We have used this Jeep to explore many trails in Oklahoma and Arkansas.  The Jeep is nearly origional with only bolt on accessories and could easily be restored to origional condition if desired.  The body is in very good shape with only a little panel straightening needed.  I haven’t found any rust on the Jeep except for the hat channels which have been strengthened, but would require new for restoration.  This CJ is very solid….”

View all the pics on eBay


To Top

1947 CJ-2A Duncan, OK **SOLD**


UPDATE: **SOLD** Was $3500

Here’s another unique Cammo special.

“1947 Willy Jeep CJ-2A 4×4 – Original engine – Runs great, street legal, excellent for hunting. Great for parades or as a collectors item. Oversize tires. Camo colored. Price $3500 or best offer. Located in Duncan, Oklahoma.”


To Top

1948 CJ-2A Sandy Creek, Ny $300


(05/28/09) It’s got some rust issues …

“I listed this earlier in the summer, but have gone down significantly in price as I don’t want to see it sit outside through the long winter and I have no garage to store her in. Has a crack in the windshield. Needs new clutch, spark plugs and fresh gas. The frame is solid but rusty. Hard arctic top and doors. No papers. Would make a great project for the garage this winter and have ready to go out mudding in the spring. Serious inquiries only and if you set up a time to come out, please follow through! Located in Sandy Creek. May be able to arrange delivery for half price of local towing company. They want $150 to go to Syracuse, I will charge half whatever they quote for your specific location. You must come and look and pay cash first before any delivery will be arranged. $300 Firm on the jeep. Email or call Jim 783-1464.


To Top

Bantam “Pilot Car” Reborn

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs, videos

Bill, who runs this great Bantam Website, forwarded me a link to the below video which reveals the results of a four year Bantam Reconnaissance Car Pilot recreation completed by Duncan Rolls.

From the YouTube website, Watch a perfectly authentic re-creation of the original Bantam Reconnaissance Car Pilot (the world’s first jeep) go on-road and off in a demonstration by builder Duncan Rolls. The Pilot Re-creation required over 3500 hours of work to build. The drive components are original Bantam and Continental parts, as are the gauge cluster and other parts (a total of 60 per cent of the vehicle). Duncan made the chassis and body completely by hand. The only original sheet metal was a stock Bantam cowl, but even that had to be widened by six inches, just like the original was. The original Pilot, delivered to the Army at Camp Holabird, MD on September 23, 1940, was lost to history after successful testing.

To Top

1948 CJ-2A Lowell, AR **SOLD**


UPDATE: **SOLD** Was on eBay.

The dashboard is unusual.

“1948 Willys Custom Jeep with a Ford 302 V-8 Engine, 4-Speed Manual Transmission and lots of other extras that makes for a perfect hunting/farming/ranching vehicle. This jeep has had a lot of alterations but runs and drives good. The body is straight and the drive train seems to be tight. The engine has limited blow-by but does show some exhaust smoke. Some reconditioning may be needed but it should provide you with a lot of great service.”


To Top

1947 CJ-2A Neosho, MO **SOLD**


UPDATE:  **SOLD** Was on eBay. 

This comes with the weight kit on the front.

“1947 Jeep Willys C-J2A, original 4 cylinder flathead. 3-speed transmission. New brakes, shocks, and exhaust. Weight Kit on front, and 3point hitch. PTO $6500 OBO”


To Top

My Build: Cage Painted and Installed


TABLE OF CONTENTS: There’s 4 sections to this post:

  1. 1. My Completed Cage in my jeep
  2. 2. What I thought about when building my cage
  3. 3. Links to dicussions about my cage
  4. 4. Other roll cage images

1.  MY CAGE:
Here’s the cage in the jeep.  Yeah, I’m happy about this.  It’s a little chromier color than I wanted, but I suspect I’ll be covering it with wrap soon.  I already hit my head once, lol …





And here’s a video:


And an overview of my experience:

This post reflects my experience researching and building my roll cage.  My goal with this post is to eliminate the need for others to spend the hours and hours I spent researching weighing options and deciding upon a cage.  Note that while I have had a couple cages and my dad built two cages (back in the 70s), this was the first cage I designed, bent and built myself.


Continue reading

To Top

1949 CJ-3A Klamath Falls, OR **SOLD**


UPDATE: Was $2000. **SOLD**

It needs a new rear driveline.  Otherwise, it looks to be a very good price.

“1949 Jeep willys, 350 4 bolt main 400 horse, B&M shifter, turbo 350 tranny, 8k lbs winch, new soft top, newer tires, Need cash, jeep I know its worth, my loss your gain, clean title from washington, Jeep runs and drives but does need new custom drive line made for rear”


To Top

Rebuilt SM420 + Adapter Running Springs, CA $300

• CATEGORIES: Transmissions

This sounds like a great price.

“Have a newly rebuilt Chevy SM420 transmission. Bought it originally for my Willys wagon and never installed after going with a different drive train. This trans is one of the best for off roading due to its low 1st gear and is great in short wheelbase rigs since its only about a little over a foot long. This Trans also comes with an extra 420 that is not in great shape but its extra parts! I also have a Advanced Adapters SM420 to Dana 18 alum. adapter along with a twin stick Dana 18 T-case for sale as well. Asking $300 for the two trannys. If you have any questions just give me a call at 909 519 5787 Thanx!”


To Top

Fiberglass One Piece Flattie Body Norco, CA **SOLD**

• CATEGORIES: Body Parts, Racing • TAGS: .

UPDATE:  **SOLD** Was $1800

I thought I had listed one of these already, but I can’t seem to locate it.

“Custom 100% hand laid fiberglass Willys replica. Perfect for light weight drag racing, ideal for rock crawling. Call for more details.”



To Top

1953 CJ-3A Eugene, OR **SOLD**


UPDATE: **SOLD** Was $4000

“Sorry Willys owners. I need money for a construction project and that is why I am cutting the price on this fantastic 1953 Willys. It has a fresh 327, 35 muds, 9k winch. Runs like a champ. Stored undercover, has top and doors, trailering parts.”



To Top

1947 CJ-2A Wrightwood, CA **SOLD**


UPDATE:  **SOLD** Was $2995

“1947 Willys Overland CJ2A. Take a look at the pics and you can see this Willys is in great shape. It has near new tires, 4 on vehicle and a 5th matching tire/wheel for a spare,2 inch spring lift,tow bar, steering box conversion, additional fuel tank mounted to underside, GM tilt steering collum, straight body. It runs great and is currently regestered until July 2010. It comes with a rear seat and a bunch of spare parts.$2995.00 FIRM.=”



To Top

1943 GPW Denver, Co $4200


Jay went to go look at this jeep and provided the following description.  Thanks Jay!

The frame horns are a little screwed up in frontand has a rebuilt studabaker straight 6 in it instead of the ford motor.correct tranand transfer, runs good. The tub is the cleanest gpw tub ive seen except 1 hole that was cut in dash for a radio??. easily repairable. Very little rust except for a little by the axe/shovel location.Still has tool box lids, data plates on glove box, gas tand and sump, two original front seats. Frame number was “welded over” when motor mounts were changed for motor. Front crossmember was modified to drop radiator a little. I don’t think he is that negotiable.

Here’s a description from the sellers:

“Rebuilt 6 cyl. flathead engine. Rebuilt trans, Rebuilt transfer case. New brakes. New wheel bearings,New springs , has traction Bars.(for show) New Shocks. New steering linkage. Brand New tires. Custom Gas tank.  Has been all rewired and new gauges. Heater. Painted light Metallic Blue.Top is from a CJ -5 made to fit. This has been in AUTO SHOWS  in 1986,87,88,and 89. New Battery.. I am the third owner of this jeep. There is some rust by driver door where the shovel use to be  mounted.  303-433-7928”