To Top

1960 FC-150 Wilder Vt eBay

• CATEGORIES: FC150-FC170-M677 • TAGS: .

UPDATE:  This is back on eBay

(03/16/2010) Here’s a nice looking build with an engine and tranny update.  It still needs some interior work.

“Rare find, 1959 Jeep FC-150.  This is a stock appearing FC-150 that has the following modifications/improvements:
1. Chassis has been sandblasted and painted with POR15.

2. First engine was the wimpy 4 cylinder and I then changed it to a V6 Dauntless from a 1967 Jeepster after resealing and rebuilding all rotating components. Engine is fitted with headers and dual exhaust.

3. Transmission was changed from the 3 speed to a Turbo 400 automatic.  There is no evidence inside the cab that it is an automatic.  The shifter is the original and the pedals are all the same.  The Brake and the Clutch pedal have been joined.

4.  There is a new wiring harness and new instruments installed in crinkle finish dash.  The interior is without headliner cardboard and doors do not have cardboard panels installed.

5.  New windshield and rear glass, one door has new glass.

6.  All NEW springs, not rebuilt. New Shocks, new Brakes.  Front axle has disc brakes.

7.  Body has NEW cab corners, NEW floors.  The cab was plastic bead paint removed and spray weld to treat any traces of rust.  There are no bondo patches anywhere.

No stories, I have had it long enough and I dislike interior work so I never finished the interior.  It is quite powerful and runs like a bear.  I have never had it off road in 10 years.  My Son needs a car and my wife insists on airbags.  I have over $15k in this at this point but it is time for it to go. There is no title as Vermont does not title vehicles over 15 years old.  Sold on a bill of sale.”

View all the pics on eBay

Here’s a before pic:

Here’s the after pics and an in progress pic:

To Top

1953 CJ-3A Coos Bay, Or $4900


1953_cj3a_coosbayUPDATE:  Price updated to $4900.  More pics below.

(11/02/09) I’m thinking this might have a replacement body.  It looks good.

“It’s a nice solid Jeep. Great Buick V-6, 5:28 gears, 4spd with overdrive, nice roll bar, nice BFG tires. Customize or use as a daily driver. make me an offer or trades. 541 297 3668

To Top

Dexter’s Slat Grille Purchase


UPDATE:  This slattie was bought in early 2010 and resold a few months later.  It demonstrates how a little work can go a long way.  Dexter found a variety of deals using craigslist and managed to improve this inexpensively.

Below are the before pics.  Here are some after pics.


To Top

1952 Truck Bayfield, CO **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .

UPDATE: **SOLD** Was $2000.

This looks solid for the price.

“1952 willys jeep truck runs great, everthing works crome is in very good shape there is two rust holes about the size of a quarter. the rest of the body is in good shape. all origenal. 4cyld motor.”

To Top

1948 CJ-2A Smithfield, NC **SOLD**


UPDATE: **SOLD** Was $300

For a parts jeep, this looks like a decent price.

“1948 willys jeep cj2a.  same body style as the ones you see in all the WWII movies (only this is the civilian version). has original L-134 Go Devil engine, has original trans, transfer case, front and rear ends, has original wheels. I have taken off the carb, intake and exhaust manifolds, the windsheild (with good glass), seats and original head.  head has been shaved and cleaned up by a guy off of US 70 E in LaGrange, NC, I replaced part if the rubber fuel line.  I have a new head gasket for it.  Needs body off, tub needs to be either replaced of the appropriate replacement body parts welded on.  Before I removed the head and replaced the fuel line, I figured out that the rubber fuel line was worn out so I wasn’t getting any fuel so I put gas in the carb and got it to move a little ways after I figured out the shift pattern and before the carb ran out of gas if you put it back together it will run.  all the parts you need are on this web site  I am willing to part out or sell the whole thing for $300.00 or best offer (serious offers only not junk e-mails please). If you want larger parts (i.e. engine, transmission, ect.) give me a call a head of time and you can help me pull them for you (I should have all the tools needed eccept a cherry picker) and Ill get what I need from my toolbox at work.  for smaller parts come by and pick them up”


To Top

1961 FC-170 Lake Wales, Fl **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: , .

UPDATE: **SOLD** Was on eBay.

“This “Go-anywhere,” “Tough-job traction” truck is on the market here for the first time in over 20 years.  Originally purchased from a glass co. in OHIO by the current owner.   He has done a complete frame off restoration as you can plainly see in the photos. Introduced in 1957 the Jeep Willys FC-170 was wider and carried a heavier load than the FC-150.  It has a Kaiser 6-226 motor inline 6 that is good on gas.  You won’t get stuck with high/low option 4WD and LT235/85R16 tires.

The bed is made of appatong wood said to be 5 times harder than oak for those heavy loads.  The truck has a 7,000 lb. GVW, a 103″ wheelbase with a 108″ bed.  The Cab-over design is very unique. There were approximately 2,000 FC-170’s built in ’61.  You will be guaranteed to be the hit of the car shows…”

To Top

1960 Truck Muskegon, Mi $3500

• CATEGORIES: Willys Trucks • TAGS: .

This looks very nice.

“1960 willys jeep pickup truck; stock willys hurricane motor; high & low gears run great; drives good; lost job, must sell; drives good; call Rick 231-578-6743”

To Top

1958(?) CJ-3B Tennyson, In $2000


This might be a good value if the body is in good shape. It’s sure not a 46 tub.

“i have a 46 willys tub it is a older resto.. no motor ar trans its on a 58 frame. has the low back seats with original window frame, gas tank, fender grill hood and tail gate.has unicersal 12 circuit painless wireing harness, really good shape for age. have open title.. just lost interst and the room for it. asking 2000 o.b.o might consider trade would like a decent 4 wheeler 350cc or bigger or anything of interest no fords though. can email pictures and any questions or call 3063063 after 3 p.m”

To Top

1957 CJ-5 Dallas, TX **SOLD**


UPDATE: **SOLD** Was $2300.

Not bad for a running CJ-5 that includes an overdrive.  At least, I’m assuming it still runs?

“1957 Jeep Willys CJ-5. 4×4, hurricane 4 cylinder, warn overdrive, good tires, new brakes. Hasn’t been on the road in a while. We used it for a farm and hunting rig. $2,300”

To Top

1952 CJ-3A Stanford, Ky $1300


UPDATE: Price dropped to $1300

(03/30/2010) Based on these pics I’d say the body on this is less than ok.

“1952 jeep willys cj3a. Seems to have all the original parts. Ran when i parked it three years ago. Body is ok considering the age. must sell so make an offer. i don’t check my email so call 859 583 1369”

To Top

1951 Wagon Ellensburg, Wa **SOLD**

• CATEGORIES: Willys Wagons • TAGS: .

UPDATE: **SOLD** Was $6200

(02/17/2010) Nice Wagon!

“A Cool 1951 Willys Wagon. It is a two wheel drive. The engine is a fuel injected Vortec V6 backed up by a 5 speed manual with about 45,000 miles on them. Just installed this summer is a heavy duty mustang II independent front suspension with tubular a arms power disk brakes and rack and pinion POWER steering. New shocks all around, just tuned up and oil change, does have a collectors license. Wipers, lights all work turn signals installed, high-back bucket seats in front, foldaway bench in back with 5 seat belts installed. guages work. Gets about 24 mpg and good power. cruses at 75 with no problems. get in and drive it. you don’t have to mess with mechanicals. ”

To Top

1970s Jeep Go-Kart Greenfield, Wi **SOLD**


UPDATE: **SOLD** Was $500.

Matt spotted this great find in Wisconsin.

“vintage 1970s pepsi soda jeep truck go kart has gas powered engine in great shape size 21 tall by 62 long and 33 wide 500.00 or best offer”

To Top

1957 CJ-5 Orange County, CA **SOLD**


UPDATE: **SOLD** Was $1100

The body looks in great shape.



To Top

1948 CJ-2A Los Angeles, CA **SOLD**


UPDATE: **SOLD** Was For Trade.

Here’s an interesting build.

“will trade for bass boat and trailer.”

To Top

1951 CJ-3A Salinas, CA **SOLD**


UPDATE:  **SOLD** Was $2800.

It needs a little work.

“1951 CJ3A Willys Jeep. The Good: Complete, mostly original, flat-four. Also includes full 6-point cage, new tires, new shocks, new gas tank and lines, and new brake lines. The Issues: It has been sitting for a while and was in the middle of a 12-volt conversion that was never finished (no generator or alternator currently) when I bought it, wiring needs attention, turns over and starts, has a couple rust-out spots under the rear tail lights, quater size hole under the drivers seat in the pan, and rust in the rigger body braces under the body near the frame (where the wood was located). No pink slip.

I bought it as a project and have not had the time to finish it. It had been sitting for a while prior to me buying it… I massaged the cylinders with some Marvel oil, added some fresh gas to the carb and it cranked over and it tried to run. Sputtered, puttered, but ran. Since then, I have replaced all the gas lines, cleaned the new tank (it had old gas in it), added two inline filters, new plugs, new wires, and there it sat. Thus, I know it’s not frozen and only needs minor tweaking to run.”

To Top

Year? CJ-3a San Jose, Ca $2900


This must be sold.  Someone may get a good price on this. I can’t tell if it runs or not.

“as is, we’re moving and its to be sold for asking price or b/o needs to be sold please call (no e-mails) Art (408) 648-3943 or Tony (408) 836-7360”

To Top

1947 CJ-2A Wenatchee, Wa $2000


Here’s a pretty good looking project.  It appears some good work has already been done.

“47 CJ2A needs to be assembled. 1.Frame needs brake cylinder kits installed. Have kits. 2 Body has section in tool box under passenger seat that needs patched otherwise it needs small dings fixed. Its in very good condition. 3. Has good windshield and grille and fenders and tailgate. Just need to be bolted on. 4. Engine was supposed to be rebuilt. I put new gaskets in it but ran into problems when I tried to put the oil pump in. It ruined the gears on the pump but have a pump that gears can be taken off of. Not sure what is the problem there. May need a new cam or just a better gear?. Flywheel has been turned and ready to install. Have 16″ rims with old tires for it, but the 15″ tires for pushing it around go with it. Have a steering wheel but needs to be epoxyed. I have too many projects right now so I decided to sell it, but will keep it if I can’t get what I have into it out of it. Body and parts are really nice condtion.”

To Top

1948 CJ-2A Southern New Jersey $4800


This looks pretty stock.

“1948 CJ2A Jeep willys…. 100% Frame restoration, New brake lines & hoses, New brake clyinders, New Clutch, New shocks, Rebuilt 134 4cyl Flathead (3 Miles on Engine).. Rebuilt T-90 trans w/ dana 18 transfercase… New universal joints front and rear.. Dana 41 rear, Dana 25 Front….. Runs and drives.. Needs very little body work.. Comes with a spare rolling frame in great shape.. Also lots of extra parts.. Non original seats!!! $4800 cash firm CLEAR NJ Title, or will trade for a Harley or older triumph or Indian.”

To Top

1958 Truck Reno, Nv **SOLD**

• CATEGORIES: Willys Trucks • TAGS: .


“For Sale:1958 Willys Jeep pickup 4×4, 226 ci super hurricane flathead 6 cyl engine,manual trans. Body is pretty good shape other than the rust in the floorboards(not a bad repair),little rust elsewhere in the truck. Rear window is cracked,otherwise glass is good.The engine should run with a good 6 volt battery, almost had it fired when the battery in it gave out comepletely. Good resto project or good to customize. Asking 1000.00 O.B.O”

To Top

1961 Wagon Omaha, Ne $5000

• CATEGORIES: Willys Wagons • TAGS: .

This is a good looking wagon.

“1961 Willys Wagon, Totally restored, 4 wheel drive, only driven on weekends, Lots of fun to drive! Call 402-571-7226

To Top

1946 CJ-2A Neenah, WI **SOLD**


UPDATE: **SOLD** Was $3600

“This is a 1946 Willys CJ2A Jeep with spare parts. The tub was taken from the frame and repaired a number of years ago.. Both tub and frame are solid. Has brand new fuel pump and gas tank. Carburetor needs cleaning or adjust because it wont stay running. It starts right up. Good tires and wheels. It has a farmer paint job you might want to redo. Front windshield is here. Newer wiring harness is installed. Lights work, but parking need to be hooked up. Brakes good. Clear title.”


To Top

1957 CJ-3B Gloucester, VA **SOLD**


UPDATE: **SOLD** Was $8000

ALWAYS DOUBLE CHECK THE VIN … THIS WAS A FUN ONE: The seller noted on ebay that this is a ’57, but it has the older, pre’57 dash.  That raised a flag.  So, I looked closely at the VIN:  The first set of numbers are 55268 instead of 453 GB2. That VIN actually belongs to a 1956 Pickup Truck 6 cyl (226 ci) with 4wd with a serial number of 33836.  See this service bulletin for the details.

“Very original Willys CJ3B. No body lift, original 4cyl engine, manual lockers on front, 3 speed trans. Color is Red, original upolstry in great shape and this has rear bench seat. Tool box under passenger seat. 4 good tires – spare is for decoration. Has AM/FM cassette and Jensen speakers under dash on firewall. Top is serviceable. No Bondo.”


To Top

1953 CJ-3B Redwood City, CA **SOLD**


1953_cj3b_redwoodcityUPDATE:  **SOLD** Was $5000

(09/03/09) It looks ready to go.

“1953 Willys hi hood.  4 cylinder, 3 speed, 2 inch lift, 31 inch tires, Warn 8274 winch, K-line soft top, roll cage, custom spare tire rack with fuel can holder, and connfer storage rearseat. 2nd owner. Accept cash only. $5000 obo.”

To Top

Motor Update #2


UPDATE: I called Steve (see below) and he had a perfect engine for me, a 1985 Buick 3.8L for only $199.  Unfortunately, I waited until Saturday to go see the engine and it was sold by then!  However, someone else responded to my Ad.  As part of a parts liquidation they bought, they have a pair of rebuilt heads that are exactly what I need.  So, this should work out perfectly (I should have them by Tuesday and will provide an update then). Hopefully, this resolves the issues with my engine!

(03/25/2010) I placed a I-need-heads-for-my-buick-v6 ad on Craigslist tonight.  I got responses right away. I also located an engine (and tranny) for $125, a brand new rebuild engine in Kennewick for $500, and a running engine in Tacoma for $100.  It’s been a good day for parts hunting!

Steve contacted me. He’s local (actually lives in Eagle, Id).  He’s liquidating a bunch of rebuild motors with new re-manufactured blocks.  They are all being sold for $199.  You can read more about these motors here:
If you like something you see in that list, let me know and I’ll check it out.

To Top

1940s CJ-2A Devore, Ca $600


It looks like a parts jeep.

“Project Willys CJ2a jeep. The wheels in it are not included, just there for rolling it around the yard. The wheels pictures in front of it are included, there should be a fourth. I haven’t tried to run it but engine and drive train appear to be there and intact. Please reply though craig’s list if you would like to come see it. Ed”