To Top

Rare Husky Overdrive Nampa, ID **SOLD**

• CATEGORIES: OD Other, Transmissions

t90_18tx_huskyod_nampaUPDATE:  **SOLD** Was $750

The Husky Overdrives are very rare. Here are some overdrive links.

  1. Herm’s site has best history on overdrives on the web
  2. The CJ-3B site has some information on overdrives
  3. Here’s a thread on the Early CJ-5 site about Husky vs. Warn

“For sale: T90 Transmission, Dana 18 Transfer Case, & Husky overdrive out of a 1962 Willy’s Jeep CJ5. Comes with a bell housing and adaptor for a small block Chevy if you want it. All worked when pulled a couple of years ago.  Dana 18 overdrives are hard to come by. Husky copied Warns overdrive until Warn sued them and they had to stop. They are supposed to be just as good as the Warn unit.

To Top

1963 DJ-3A Gala Surrey Houston, Tx eBay


1963_dj3a_surrey_houstonThere are a TON of great pictures of this Surrey.  I don’t think I’ve seen this Surrey listed previously, but I might have missed it;  it looks like no expense was spared in it’s restoration.

“Purchaced by Wayne Davis because his wife liked the way it looked, this Gala-Surrey was purchaced at a small Jeep dealer in Cleveland, Texas, a full restoration began with an unlimited budget. The car was brought back to its original color scheme of pink and white as no detail was overlooked. The end result revealed a car ready for any show.  Contact Jose at 281 497 1000 with questions about this Jeep”

View all the images here

To Top

CJ-3B Stainless Windshield Frame Lacey, Wa $350

• CATEGORIES: stainless/jewels • TAGS: .

cj3b_stainless_windshieldHere’s a great price on an imperfect stainless windshield.


To Top

1957 FC-150 Sacramento, Ca $1000

• CATEGORIES: FC150-FC170-M677

1957_fc150_sacramentoThe rust doesn’t look all that bad.  This might be a decent price for it.

“This is a 1957 jeep fc 150. its all original but has some things missing and a little rust. things missing that i noticed are the distributar and speedometer. the passenger door is damage but could be fixed by a body guy, some rust but will be surface only and could all be taken off when sandblasted, nothing that bad, i would suggest removing the bed and cab to go through it, these trucks are very easy to pull apart. its got the original engine and was running about ten years ago. most of the parts are willy’s jeep and can be bought still through local dealers. the seats are there and there’s a few extra heads in the bed. i noticed a bunch of spare parts in the bed, i will get an inventory soon. call me if your interested, ill try to answer any questions, erik, 916-218-9187, $ is negotiable and i will deliver it!!…”

To Top

1944 MB Campbell, Ca no price


1944_mb_campbellThis seller is open to trades, including ex-wives — not exactly sure how that works …

“I have a 1944 Willy’s MB Jeep, AS you can tell from the photo it’s been sitting for a while. It was in great running order when I parked it so it would take some TLC to fire it up again. Great Project . MADE IN AMERICA ! Also have an EXTRA MOTOR, 2 fenders, front grill, hood, hood has a hole cut in it though. So i will be accepting any offers and or trades,other vehicles , skilled labor,landscaping, ex wives, etc. Let me know.”

To Top

1945 MB Santa Rosa, CA **SOLD**


1945_mb_santarosaUPDATE: **SOLD** Was $3000

“Here is a 1945 Jeep willys MB, it has a 327cu motor runs fine with a 4spd trans, 1976 CJ axles, 33″ tires, needs slave cylinder for clutch. it is a great four wheeler, stump puller, or ranch mule, will smoke all four tires any time, we have never got it stuck.”

To Top

Overdrive Windsor, Ca $500


I’m not sure if this is a warn overdrive or not. No pics and little description.  I’ve emailed the seller to learn more.

“m38a1 jeep overdrive ”

To Top

1942 MB/GPW Scotts Valley, Ca $4300


1942_mb_scottsvalleyInterestingly, the body appears to be a MB/GPW, but the driver side cutouts are missing.  So, I suspect there’s been some body work done at some point.


To Top

1962 FC-150 Hayden, Id $17,500

• CATEGORIES: FC150-FC170-M677

1962_fc150_haydenUPDATE:  The price of this FC-150 rose to $17,500 from $15,000 and is now on eBay.

This is a sweetly restored FC-150.

“1962 willys fc-150 willys jeep for sale.Been mostly redone except the engine still has the 3 speed in it.I ahve about 8000 in the interior alone.i tried to keep it all me with any questions”

View all the pics on eBay

To Top

1948 CJ-2A Silver Springs, NV **SOLD**


UPDATE:  **SOLD** Was $3000

Who needs a bored out monster engine to climb rocks?  I’m always amazed at these modified jeeps that still run L-head engines.  This CJ-2A looks to be wearing an MB/GPW body.

“Runs excellent, very mechanically sound. Features: Original L head four cylinder, power steering, 12 volt system with new alternator, brand new electronic ignition, new water pump, new wheel cylinders, 8000lb warn winch, both axles fully locked, lock right locker in front axle, detroit locker in rear axle, front axle completely rebuilt, highlift jack and more!! Have receipts.”

To Top

1949 CJ-2A Albion, NY **SOLD**


UPDATE:  **SOLD** Was $4900.

This jeep looks very straight and nicely accented.  It has some interesting headlight bezels.  It also apepars to have an overdrive setup.

“1949 Jeep Willys CJ2A in excellent condition. Beautiful charcoal grey exterior with purple accent stripe. 6 cylinder engine runs good and transmission shifts good too. 4 wheel drive works like it should. New tires and wheels. A very respectable Willys. Must see to appreciate. We have never driven it in rain or snow. Usually sits inside our barn and has antique insurance on it. Could take to shows if you wanted to.”

To Top

1946 CJ-2A Franktown, Co $1500


UPDATE:  The price has dropped to $1500.  It’s been for sale since June.  There are more pics this time.  It looks like it’s in pretty decent shape.

“Runs great/original Needs brake line. Call Mike @303-913-6453, leave msg if no answer.”

To Top

1946 CJ-2A San Diego, Ca $750


1946_cj2a_sandiego3This ad made me laugh, because the seller claims this “body has not rust”.  Now, the hat channels may in fact be in great condition and maybe it’s just my eyes, but isn’t there rust on this body?

“Great project or parts Jeep.No engine,trans or hood.One of the nicest body tubs I have ever seen.This body has no rust out,even the hat channels are solid.It’s a rolling chassis on 16″ wheels.Put your drivetrain in it or use the body on your Willys.No sense spending alot of time and money fixing up a rusty Jeep when you can get a rust free one.$750.858-705-1878”

To Top

2 10″ and 2 12″ wide 5×5.5 rims Silverdale, Wa $40

• CATEGORIES: Tires and Rims

mud_rims_silverdaleNeed some cheap 12″ x 15″ rims?  Here’s two of them along with two 10″ x 15″ rims.

“I have 4 of these 15″ wheels. These fit the old style DANA 44 axles. They are for some big mud tires. Two measure 10″ wide for the front and two measute 12″ wide for the back they have deep offsets. They would be perfect for Super Swampers, Terra Tires, Boggers, or any Mudders. Please call Stuart at (360) 698-2384.”

To Top

1951 CJ-3A Wellington, CO **SOLD**


1951_cj3a_wellingtonUPDATE: **SOLD* Was $900.

“1951 Willys 4X4 Jeep Project. Solid body, Floors been replaced. No engine. Nice project”


To Top

1947 CJ-2A Caldwell, Id **SOLD**


UPDATE:  The price on this jeep has dropped to $2500. **SOLD**

I was driving through Caldwell the other day and the dealer was just parking this jeep as I sped by the lot.  So, I couldn’t resist turning into the lot to take some pics.  Of course, after walking up to the jeep, it took only a couple seconds for a sales guy to come over and offer his help.  He tried making a couple points about the jeep, which I gently pointed out were incorrect.  I then provided him with some information about the year of the jeep and how it differed from a military version.  He got quiet after that. Though I didn’t tell him, I would say it’s way over priced.  I wouldn’t pay more than $1500 for it as, for starters, the front of the frame at the point of the grille on both sides has been welded, re-welded, and cross welded.  Here’s some pics.

Continue reading

To Top

1957 CJ-3B Pueblo, Co **SOLD**


1957_cj3b_puebloUPDATE: **SOLD** Was $2500.

“1947 willys with cj3b body civilian, 327 corvette engine, 4 speed muncie, overdrive, the new body hasn’t been cut or drilled for guages $2500.00. “

To Top

1965 CJ-3B Phoenix, Az **SOLD**


UPDATE:  This CJ-3B sold for $8000 on Jan 17, 2009

Very nice CJ-3B.  Check out the pictures.

“This ’65 CJ is all 100% stock and is the last year for this model offered in the US.  It was replaced by the more popular CJ5.  Kaiser, after purchasing Willys, dropped the embossment letters in 1963, but I have purchased exact repos and installed on the Jeep.  To a real Jeeper, even a Kaiser, is a Willys. This Jeep underwent an extensive 2-year restoration in 2000-2002 in the Seattle area by a Jeep enthusiast, who has done quite a few.  It was originally towed over from Montana.”

View all the pics here

To Top

1950 CJ-3A Flagstaff, Az $2500


1950_cj3a_flagstaffNot to make fun of the paint job, but I really thought something was creating shadows over the jeep.  Then, I looked at an interior pic and saw it had a strange camo paint job.  I thought, ‘wait, that’s not on the outside of the jeep’.  But, I was wrong, it is indeed some type of camo on the outside.

“1950 Willys Needs Title 4X4.  Priced to sell at $2500 or best offer.  I’ve had this for over a year… received it in a trade. New 327 engine. 205 Trasfer case. Dana 44. I am a professional mechanic owning my own shop for 15 years, and I can tell you this jeep is nice. Please no trades. Check out the pictures and give me a call at 928-527-8800 I prefer to be reached by phone not email, thanks.”

To Top

1948 CJ-2A Phoenix, Az $3200


1948_cj2a_phoenixHere’s a unique paint job.  That front sure is a bit higher than the back.

“Four bar coil spring suspension; sway bar; full roll cage with cloth top; high back bucket seats; dana 44 locker rear; new constant velocity rear drive shaft; power steering with tilt wheel; power brakes; extra disc brake kit; extra new under seat gas tank; late model transfer case adapted to recently rebuilt turbo 350 automatic; Mercury Marine 305 small block chevy; street rod headers with full exhaust out the back; Edelbrock Performer intake manifold with 600 cfm vacuum secondary carb (rebuilt); new fuel pump; transmission cooler with fan; Optima gel battery; 15x35x15LT Super Swampers; Waren locking hubs. 602-763-4539”

To Top

1951 CJ-3A Grants Pass, OR **SOLD**


UPDATE: UPDATE:  **SOLD** Was $1800. 

“im selling my 1951 willys jeep, it has a buick V6 and a snow plow on the front!! pleas call dutch”

To Top

1946 CJ-2A Central Point, OR **SOLD**


1946_cj2a_centralpoint1UPDATE:  Was $3200. **SOLD**

This CJ-2A has been highly modified. It sounds like a pretty good jeeping jeep.

“1946 Willys Jeep CJ2A. Frame off rebuild, everything new- body sandblasted, repainted. tube front fenders widened 3′ over stock. New poly bucket seats. 2×4 rec. Rec. tube chassis, new YJ springs outboarded, Dana 44 front and rear Wagoneer axles with new 4.56 gears/Powerlocks front/rear. Saginaw steering. New 4.3 Chevy V6, rebuilt stock with Edelbrock intake and carb. SM420 4 speed with Novak adapter to a Dana 20/18 hybrid. New Q78-15 (35”) Super Swampers on Chevy Rally wheels. New plates and tags. “

To Top

Reader Builds — Troy’s nicely modified CJ-3A & race jeep

• CATEGORIES: CJ-3A, Racing • TAGS: .

troy_shipman_racejeep1UPDATE:  Troy sent along a couple pics of his race jeep also.  There’s one to the right and one down below.

Below is Troy’s street and trail CJ-3A.  It’s been modified in a variety of ways, including a Dana 60 in the back, a Dana 44 in the front and lockers all around.  Troy buys and sells stainless steel in the Northwest and is trying to decide whether to start adding more stainless steel or not to this jeep.  His biggest concern is if he starts dressing it up too nice, he’ll be too afraid to bring it out to the trails.  If this jeep does start growing stainless steel fenders, I doubt he’ll suffer too much as  Troy will still have an opportunity to get dirty playing in his flat fender racing jeep that he calls “Twisted”.

Also, if you seek any stainless steel parts for your CJ-3A or CJ-3B, Troy assures me he can get them for you.  You can contact him at



To Top

Barrel Racing in the Tacoma Dome Jan 16 & Jan 17, 2009

• CATEGORIES: News, Racing • TAGS: .

racejeep_tacomadome2008This weekend, Friday January 16 & Saturday January 17th, 2009, members of  the PNW4WDA will be holding barrel races as part of a Monster Truck show at the Tacoma Dome in Tacoma Washington.   As you can see from the 2009 schedule, most of the races throughout the year tend to be in fairly remote locations, making them pretty private; This race provides a unique opportunity for the general public to see these unusual jeeps.  To the right is a link to a myspace video shot last year by a spouse of the racer  (I assumed it was from a spouse considering the ‘dumb ass’ comment heard in the accompanying audio).

Here’s a link to a TON of pictures from 2008 Tacoma Dome races on the Moonshiners’ Jeep Club website (though lots of dark and blurry ones too 🙂 ).

To Top

1952 M-38 Surakarta, Jawa Tengah, Indonesia eBay


1952_m38_indonesiaThis is for our Indonesian readers, of which there are probably zero ….  However, we have some great readers from India who might find this M-38 a rare opportunity.  NOTE:  This body does not have the battery opening on the cowl nor the cutouts on the passenger side!!

“This is a 1952 Willys GPW M38. It has been completely disassembled and rebuilt and restored from the ground up. Everthing on or in this Jeep has ethier  been rebuilt or replaced. The engine was rebuilt in the process. Everthing works as it should including all the gauges. The top and all the upholstery is new…..”

View all the pics here