emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: Still Available.
(02/13/09) If this is running, it might not be a bad price.
“This is a 1943 Willys world war 2 Jeep. It has practically brand new seats and tires. if you have any questions please call Robert at 559-322-1321 or 559-797-5206. i am asking 2500 OBO. i am selling because i need the space. be sure to view picture below….”
http://fresno.craigslist.org/cto/1026468502.html
UPDATE: **SOLD** Was $4800.
(01/07/10) I believe the seller means that this jeep is running a Dana 30 in the Front end and utlizes a SM420 for the transmission.
“FOR SALE IS A 1951 WILLYS JEEP, IT HAS A 4.3 LTR V6 CHEVY MOTOR WITH A SMR4 TRANNY. IT HAS A DANA 18 TRANSFER CASE ,A WARN OVER DRIVE, THE “GRANNY GEAR” WITH THE OVERALL RATIO OF 94 TO 1. IT HAS THE DANA 20 IN THE FRONT WITH LOCK RITE LOCKERS, DANA 44 IN THE REAR WITH THE OX LOCK, cable is broke, IT HAS 538 GEARS. IT ALSO HAS A WARN WINCH,SOFT TOP WITH DOORS, AND EVEN HAS A HEATER IN IT. IT HAS 33 INCH MUD BRUTE TIRES ON 15 INCH CROME RIMS WITH A SPARE ON THE BACK. IT HAS A CD PLAYER WITH 6X9 SPEAKERS. IT DOES HAVE A LITTLE DAMAGE ON THE FRONT PASSENGER FENDER as shown in the pic, WHICH HAS BEEN STRAIGHTEND OUT, OTHER THAN THAT THIS JEEP IS IN GOOD CONDITION FOR BEING 59 YEARS OLD. IT RUNS GREAT AND SOUNDS GOOD TO. IT HAS EVERYTHING DONE TO IT AND IS READY TO GO JEEPIN. MY LOSS YOUR GAIN”
UPDATE: **SOLD** Was $2200.
(12/29/09) Here’s a highly modified CJ-2A.
“1947 Jeep Willys. 4 wheel drive, 302, 3 speed, lock rear front, tilt wheel, bucket seats, 35 inch tires, lifted, ready for the mud, trails, etc. 9,000 pound winch. all lights work, runs & drives. looking to trade or $2200 cash obo.”
UPDATE: This looks like a very good price.
(11/17/09) “1942 flat fender Ford Jeep Willys, F Head, T 90, model 44 rear end, 25 in front, 33’s call Max @ 916-203-7931”
http://sacramento.en.craigslist.org/cto/1542544957.html
UPDATE: Final word
After playing with this issue for days, I kept running into similar problems; no matter what code I used to create the submenu, it wouldn’t work. For reasons as yet unclear, users that are not logged in can’t access the code to make the menu run.
So, I have a big reminder to people that automatically pops up on all subpages when users are not logged, reminding you/them to log into the site to view the subpages. I’ve also reinstalled some side menu widgets as well.
Please let me know if you encounter any problems .. d@ewillys.com
– D
==============
I updated to the latest version of wordpress, which caused a couple glitches. I’ve fixed most of them, but one strange issue is that when you aren’t logged it, you can’t see any sub pages. Perhaps that’s been an ongoing issue about which i was unaware?
I’ll address this asap, but the front page works just fine.
Thanks,
– Dave
Here’s an event targeted primarily at Willys Truck and Wagon owners, so if you have a Wagon or Truck, read onward. Ken and Casey are organizing it, hoping to develop a stronger network of Truck and Wagon owners. I double checked this afternoon that the event is still happening and it’s a go.
“This is going to be a great time! We are really excited about this 1st annual event. Please RSVP so Casey and I know who is going to make it. Please feel free to call or email us anytime for more details.
Kevin Mereness 208 863-1718 / kmereness@powereng.com
Casey Dimmitt 714-478-1867 / caseydimmitt@yahoo.com
Please provide some basic information when you RSVP:
Full Name:
Phone Number:
Email Address:
Rig Info: Year, Make, Model, and some basic specs
We only ask that each of you donate $10 when you arrive at the event to help us cover some of the cost of the Saturday night BBQ. And if you feel like bringing something to share, please do. We really want this to be a relaxing time for everyone. This is a family event.
Over the next few months, we will gather up some information on hotels. We will also try to get a group rate if possible.
My jaw dropped as I opened the magazine. I was in my early teens (mid 70s). To this day, I’m unsure why my father hid a couple Playboy magazines in with my mother’s stash of old magazines (I’m guessing he never thought she would look there?). But, sure enough, in my hands was gold, my eyes were big, and it was coooool! And thus, that was my first introduction to Playboy.
I can’t say I’ve done much research into the history of Playboy, but during a search of vintage magazines in general, I came across a website called Stagmags.com, which appears to be a gathering and recording of many old ‘stag’ magazines that have since gone out of publication. It’s a reminder that Playboy had plenty of competition from day 1, but to Hef’s credit, managed to successfully carve out a successful niche, while many others failed.
Now, I only bring this up as a segway to one of two images I found on the page and which you can view below. Hopefully that provides a little more insight into the image.
Dan continues to make steady progress on restoring his grandfather’s CJ-5. You can see previous reports here.
He reports, “The Jeep is down to the frame and axles. I have a new rear cross member on order. The old one was all bent and rusted. The rear hitch was all bent as well. I found a vintage hitch that is actually straight that I will be using. Once the new rear cross member is on I’ll get all the frame welding completed and then coat it with some Interstate One Step Rust Killer. It is less expensive than POR15 and easier to use but still has impressive results. My goal was to get all the frame work done this winter and I just might get there.”
Here’s a couple pics:
Here’s the front of the jeep:
UPDATE: **SOLD** Was $3000.
This seems a bit high for a project. It’s hard to tell what’s all included though.
“Buick V6 Motor. Very Clean Body Ready for completion.”
UPDATE: **SOLD** Were $10 each.
I’m not familiar with the hubs on the left.
“10 spline early Jeep/Willys hubs. $10 per set”
UPDATE: **SOLD** Was $500.
Looks like a good price on a parts jeep. The body doesn’t look bad (from a distance).
“rolling body and frame”
Here’s a buyer for a CJ-2A windshield frame. The buyer also has some stuff for sale or trade.
“WANTED: Windshield frame for a 1948 Willys cj 2a flat fender jeep. Just need one that is semi straight for a trail rig. may have some parts in trade. All from 72′ cj 5, 3spd tranny, Dana 20 transfercase, and drive lines. All are sitting in a shop a little greasy but staying dry. Also have 98 blaster parts. both front A-arms with shocks and hubs, fullset of white plastic and seat, fuel tank, stock swing arm with rear axle (bearing froze). Motor that has been rebuilt but ben sitting for a year or so (would suggest to go through it again. Will also sell these items cheap, tired of tripping on stuff. Thanks for reading. Will send pics on request. Serious people only”
Here’s a buyer.
“I will buy Willys cj3a or cj3b jeeps in original condition. Also will buy cj3a and cj3b jeep parts. Call 336-957-3512”
UPDATE: **SOLD** was $6000
(11/14/09) Lots of updates to this CJ-3B.
“1958 Willys CJ3B High Hood Flat Fender Jeep. Set up for off-road. NO RUST! Total frame off restoration in 1995. MerCrusier 4.3L engine, with four barrel Holly Truck Avenger Carb. T-18 granny low 4-speed transmission, model 20 transfer case. Dana 44 axles out of an International Scout, with 4.88 gears and Detroit lockers front and rear. Four wheel disc brakes. Spring over conversion. 38×12.50 Super Swamper tires with little wear. Late model power steering with 1” solid tie rods and Hyme joints, tilt steering column out of late model Jeep. Custom roll cage, racing seats. Large removable storage box in place of rear seat. Filled with spare parts including; fr/rr drive shafts, complete set of spare axles, and other various parts. Also have rear seat which can be reinstalled easily. Custom storage box mounted in rear receiver hitch. Front mounted Warn 8274 winch and on board air compressor. Two tops: Full soft top and bikini half top. Also CB radio, battery cut-off switch, hydraulic clutch, optima battery, custom nerf bars/rock guards.”
Check out the unusual gas can carrier.
“For Sale: 1951 Willys CJ 3A, $3,500 OBO, has a rebuilt engine (approx. 4500 miles); hardened valve seats; rebuilt transmission (all new gears); new: leaf springs, non-directional tires (1000 miles) and carburetor ; rebuilt starter; boiled out radiator; converted from 6 volt to 12 volt; all new clutch, windshield, speedometer, gas tank and battery. Also included: oil filter, radiator hoses, gaskets etc. Needs master cylinder and possibly wheel cylinders (both provided new in box), exhaust pipe and muffler could be replaced (rusty), emergency brake could be adjusted.
435-472-0947 Between 9 am and 7 pm.”
http://provo.craigslist.org/cto/2146336509.html
James has his Stainless Grille for sale. You can contact him at 530.941.4399 if you are interested.
Any of you Pirate 4×4 readers might have seen this thread about a 1947 CJ-2A rebuild (and I should probably spend more time on Pirate as I really haven’t spent any time at all on the site), but this is a nice detailed review of an L-head rebuild, frame restoration, disk brake installation on the original running gear, and more. Lots of pics and thoughtful, intelligent discussions.
Click here to see the entire build process
Here’s a few pics: The beginning, a $2800 jeep from Port Angeles, Wa. It’s in good condition, but will benefit from a rebuild.
Here it is partially dissassembled:
Here the engine is going back together. BTW, did you know you can ‘borrow’ those pistron compressors through Schucks/Autozone as part of their lend a tool program:
The engine is more put together:
Here’s an updated master cylinder:
This is part of the brake discussion:
And here the jeep is back together:
Dave forwarded me this Tim-the-tool-man-Taylor version of a Snow Blower. I’d ask why, but I already know the answer: because he could. Below is an excerpt of the article. You can read it in its entirety and see more pics here.
“December 1, 2005 If you’re tired of anemic, one-lung snowblowers with their slipping drive belts, you might consider Kai Grundt’s V8 snow blower which raises the bar on the traditional snow blower in every respect. With electric start, electric block heater, antifreeze heater and eight cylinders, it has no drive belts to freeze up and you’ll never get bored with the job as the 454 cubic inch big block Chevrolet V8 produces 412 horsepower, 430 foot pounds of torque and can throw snow 50 feet at just 3500 rpm. Nor will you get cold as the machine has been ingeniously designed to route the engine coolant through the handle bars, with the rear mounted, enclosed radiator keeping the operator nice and cozy.
The first point to make is that this is not a V8 grafted on a traditional snow blower carriage but a purpose-built unit crafted around a motor of this magnitude. It functions very much like a traditional blower by way of operator input and feedback and offers effortless safe operation.
Maneuvering the massive beastie (it has a total wet weight of 912lbs) is a snack thanks to the hydraulic-drive 4WD skid steer on independent walking beams which offers a zero turning radius. It’s also as fast as you like, with an infinitely adjustable speed range on the drive wheels via dash mounted flow control. At the opposite end of the scale, it has more than enough torque to pull your car out of the ditch before the hydraulic motors stall! ….”
<a href=”http://www.liveleak.com/player.swf?autostart=false&token=568_1233111054″ mce_href=”http://www.liveleak.com/player.swf?autostart=false&token=568_1233111054″ target=”_blank”>http://www.liveleak.com/player.swf?autostart=false&token=568_1233111054</a>
UPDATE: **SOLD** Was $500.
Here’s some body parts from a Convertible DJ-3A. It appears in restorable, uncut shape. Certainly not perfect though.
“All thats there is tub, hood, fenders, grill and frame. I’m asking $500 OBO. Please give me a call at (719)9480229”
The Israeli bureau (Or Shahar) found this interesting project. I think this build works better than I might have expected. The builder blended the truck fenders with the front clip of the YJ rather nicely. There’s still plenty left to be done; I look forward to seeing the final product.
“Ed started with a 1991 YJ with 4” lift, 15×10 alloys and 31×11.50 Thornbirds. While using the YJ’s hood, grill, tub and inner fenders he gained access to a 1954 Willys pickup and was able to blend the old Willys front and rear fenders to the YJ body giving the Jeep that retro “flattie” look. He said “you won’t believe how well the 2 meld together. I was going to build flat fenders (myself), but after a friend of mine who has a Willys Pickup, Wagon, and a Jeepster said he had some extra fenders (that cinched it).”
See the rest of the pics at http://www.4-the-love-of-jeeps.com/jeep-project.html
UPDATE: **SOLD** Was $4000.
“1961 Willys Jeep Stationwagon in good condition. There is no back seat. Tires are in good condition, 4WD works, winch works, 4spd manual, inside needs some tlc but is functional. It belonged to my husband who is deceased. I am not able to drive it but it has been started regularly . Cash only no trades.”
UPDATE: **SOLD** Was $2400!!
(12/09/09) This looks in good condition. I’ll be heading down to Salt Lake (ogden is right on the way) in about 10 days and could look at it if it is still available.
1960 Willys CJ3B – 35K Original miles in Excellent Condition with All Original Running Gear. Frame and body are in exceptional condition, there is very little cancer. Has New Interior & Paint. Needs a top, new tires, and a tune up.From the looks of the vehicle the mileage which shows 40K is original and I think many are miles towed. There is very little rust in the front floors but it has plates bolted in, none in the bed. There is also some in the front fender supports. I don’t thinkit was preped to well butit is a decent paint job. It hasbeen converted to 12 volt. There is no overdrive but the tans and transfercase seem tight and do stay in gear. the seats are he original frames but have been recovered (I believe). It has original warn lockout hubs. The hard top was taken upto eugene and it is an original aluminum hardtop,I maybe able to get pictures.
Here’s a bunch of parts and parts jeeps.
“For sale 2 jeeps for the price of one-1st a 1946 Jeep CJ2-A complete ready to restore-great frame body is solid-needs rear floors-all orginal gauges-12 volt system-orginal windshield with perfect glass-hood-fenders-3 front grills-2 extra radiators-2-steering wheels-tailgate-1961 Jeep CJ-5 with all running gears-good frame with a 2-A flat head motor-engine was running 3 years ago when last used-needs tub has a warn spicer rear PTO. 2 complete motors. too many parts to list have an extra front & rear end. Also have for sale rebuilt tranny&transfer case with emergeny brakes and drum ready to go in storage since rebuilt-for a CJ-3A will sell for 600.00. I have been collecting for about 20 years with the intention of putting them on the road,but moving south and do not want to move these. The steering wheels are complete with column.The motor for the 1946 is in excellent running condition,purcased from orginal owner.Have over 5,000.00 in parts alone. Buyer is responsible for pick up and removal of jeeps and parts. Payment is due in full 7 days after the sale is complete. I reserve the right to end this sale at any time. These items are being sold as is with no warranty. I’am going to revise this item due to the surge of questions regarding the parts what I have for sale is 2-gas tanks $185.00 each-1-extra grill $100.00-2-radiators good condition 200.00 each -rebuilt T-90 transmission new 2nd gear &gaskets 500.00 -T-18 Transfer case rebuilt new brakes,seals,bushings rebuilt in 1995 never used has been in storage $500.00 -2-extra intake manifolds $300.00 each- 2-extra carter carbs $250.00 each. Front & rear ends complete gears-brakes-drums-lift suspension-front tirerods $300.00 each.if you want to make an offer on any part send an e-mail or buy the complete package for 2,000.00.”
UPDATE: **SOLD** Was $1500
This has some interesting parts, including a top loader 4 speed, 4.3 liter engine, extended leaf springs, dana 30 front end.
“47 willy’s project no time for 4.3l engine dana 30 front axle with lockright 41 rear axle locked new windshield holbrook long leaf springs dana 20 transfercase and model 18 transfercase and a toploader fourspeed or a t18 transmission”
