To Top

SCAMP Jeep Batavia, OH **SOLD**

• CATEGORIES: Unusual, VEEP (VW Jeep), Scamp, Others This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD* Was $5000.

“made by hadley engineering in costa mesa california it is a 48-52 cj3/m38 built on 60s vwfront beam and rear torsion.has vw swingaxle with 1200cc engine runs and street legal.titled as vw”

 
To Top

1951 CJ-3A Sacramento, Ca $3750 obo

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

As I have mentioned before, finding a good quality, original CJ-3A is much more difficult than finding a CJ-2A.  This looks like a good one.

" 1951 Jeep Willys Cj3a. The only thing that is not 100% stock is the after market wheels and roll bar.
The original wheels with tires come with it. A small bimini top comes with it also. Tow bar and towing lights included. Other small extra items included. Very dependable jeep. Flat head 4 cyl, 6 volt charging system, vacuum wipers, oil bath air cleaner, glass fuel filter, it is all there and ready to restore. This is a great hunting rig. Will go anywhere. $3750 best offer. call 916 961 3200"

http://sacramento.craigslist.org/cto/788991304.html 

 
To Top

1953 CJ-3B Oakley, CA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** wAs $3500.

“I am selling a 1953 Willys CJ3B. This is a rare hi hood flatfender. This jeep is curently regestered and driven all the time.It runs great. It has F head engine and 3 speed tranny,everything works good.I am asking $3500.00 obo.I do not need to sale this jeep so no low ballers.”

 
To Top

Fiberglass Flat Fender Racing bodies — Southern Ca $1200

• CATEGORIES: Features, Racing, Vendors This site contains affiliate links for which I may be compensated.

I’m not sure what the exact story is here (might be a vendor?), but these look brand new.

Flat Fender Style One piece fiberglass Jeep bodies. Call Matt for complete details. (909)239-8463

 
To Top

1969 CJ-5 Portland, Or $3500 obo

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

The price will likely drop for this project, but the pictures suggest the seller is right:  This looks to be a good base for a project jeep.

"1969 CJ5 Jeep $3,500 Or Best Offer. Great start on an excellent jeep. Clear Oregon title, new mandrel bent box tube frame, new Rubicon Express springs, shackles and spring plates, small block chevy motor with turbo 400 transmission, locker rear end, complete tub that was media blasted with replaced floor and fire wall to fit motor. Has canvas top with doors and the wind shield is in excellent condition. This is a great foundation for anyone wanting to build a jeep. Contact Joe at 971-244-2755"

http://portland.craigslist.org/mlt/cto/786938691.html 

 
To Top

1946 CJ-2A Alabama eBay

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

I think this is the first jeep I've posted from Alabama.  Either that's a brand new body or someone has taken very good care of that jeep. 

"1946 Willys' Jeep Model CJ2A – civilian style. Yellow with black interior and black bikini top. All new (not rebuilt) front end, steering, tow ends, both transmissions and belts, hoses, etc. Parade ready."

View all the pics on eBay 

 
To Top

The PNW4WDA Summer Convention Starts Friday 8/08

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Tomorrow, the 2008 PNW4WDA summer convention starts.  This 3 day annual event used to be enormous, attracting clubs and hundreds of jeeps from all over the Pacific Northwest and Canada.  Now, it's a much more intimate event, but still fun.  

Obviously, I didn't get my jeep done in time for Summer Convention this year, but it will be ready next year for some jeeping and some racing!

 
To Top

1954 CJ-3B Denver , CO **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

“1954 Jeep Willys 3b project. This Jeep would make a perfect project or with a little work make the pefect Hunters Jeep. It has the High hood, Buick V6 motor and a PTO winch. It has been sitting for a few years and at this time does not run. If you have any questions give me a call and I will answer them the best I can.”

 
To Top

My Build – Fans

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

I went shopping at the junkyard today.  After a couple hours I came back with a steel fan and a flex fan (I couldn’t decided between them), a transmission cooler, some brake lines, and some other parts.  Yes, I had fun as usual and was only out $15.

I tried mounting the steel fan, but the bolt holes weren’t quite right.  I tried the flex fan and that will work, but I am worried about the integrity of it.  So, I decided to get online and learn more about fans.  One bit of info I ran across concerned horsepower vs. different types of fans.  Here’s the info from the site.

“Was reading the May 2000 ‘Car Craft’ and I came across something very interesting. They did a dyno test on a 496 horsepower chubby, {yes, I know — but we can still get some useful info on this…} and they tested different cooling fans to see what kind of drag each different type has.

Alternator, no fan: 496 hp
Black Magic electric fan:494 hp
Thermal clutch fan: 487 hp
Nonthermal clutch fan: 485 hp
Heavy duty thermal clutch fan: 476 hp
High performance flex fan: 476 hp
Stock four blade fan: 473 hp
Low profile flex fan: 466 hp
One piece plastic flex fan: 460 hp
OE replacement six blade rigid fan: 449 hp

They found the alternator alone, a 63 amp unit, only sucked 1 horsepower.”

 
To Top

1965 CJ-6 Tuxedo Park Mammoth Lakes, CA **SOLD**

• CATEGORIES: CJ-6 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

“very rare 1965 tuxedo park mark IV. there was only 459 of these jeeps ever produced and this model is the original long bed of jeeps. It has a very strong v-6 engine with 99,150 miles on it and it also has an extra gas tank for those long backcountry trips. The four wheel high and low work perfectly and the front lockers turn very smoothly.”

 
To Top

1972 CJ-5 Hillsboro, OR **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500

This is a nice looking CJ-5 at a reasonable price.

“6 cyl. 3 speed Jeep runs and drives. Needs a new windshield. Comes with old soft top and miscellaneous parts and pieces. Has 33×9.50×15 tires. 4” rancho lift. New windshield frame and tailgate. New fender flares and Turn signal switch. New tailights and side marker lights. All lights and turn signals work. New glove box and door. New spare tire carrier for tailgate. New seat belts.Need to be installed. Spare set of white spoke 15×8 wheels. Too many projects not enough time to enjoy it. “

 
To Top

1952 M-38 Missoula, MT **SOLD**

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

“Must Sell 1952 flat fender Jeep. 231 v6 auto. comes with 4 33-14.00-15 super swampers on wheels.. also have soft top and mech. jeep winch. offers and trades considered..”

 
To Top

1947 CJ-2A Columbus Grove, Ohio eBay

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

This is a sharp looking jeep.  I would guess the reserve is pretty high on this one.

"For Sale:  1947 Willys Jeep 4×4.  Spent most of its life in California.  Absolutely NO rust.  The paint is not perfect and has some chips.  It has a GM V-6 with roller rockers, aluminum high rise intake with 4 barrel carb, headers, spark arrester header mufflers, electronic ignition, high performance clutch with T-10 4 speed, big face tac, true-loc axles, 3 inch lift, aluminum wheels with 33 inch mud tires, 2 fuel tanks.  Grant steering wheel (also have original big Willys steering wheel and side mirrors), Bimini and full convertable top with canvas doors.  The motor has less than 5000 miles on it and is either built by Kenne Bell or has Kenne Bell parts (this information was provided by previous owner)…. Call Dave at (419)303-4918."

View all the pics on eBay 

 
To Top

1949 CJ-2A Sequim, Wa $3500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

It looks like the steps have been modified.  Probably should do a close rust check of that area.

"1949 willys jeep CJ2-A 78,412 miles. 3500$Firm. 4 cylinder F head engine, key start, 3 speed trans, w/ hi-lo range. 4 wheel drive with locking hubs. Newer fuel tank, and electronic fuel pump. Newer carb, Kay-line soft top, newer seats, padded roll bar, electronic wipers, and also comes with tow bar and wiring TOW READY!!!!! 15 years of service records, previously owned by a auto dealer. John @ (360) 461-2628"

http://seattle.craigslist.org/see/cto/806451756.html 

 
To Top

Blueprints for Willys

• CATEGORIES: Artists/Drawings, Features, Website This site contains affiliate links for which I may be compensated.

Here's an interesting site I found. Blueprints.com  claims to have over 24,000 automobile blueprints online (though they appear more like a single drawing rather than full blueprints), including a variety of jeeps.  To the right is a jeep labeled CJ-4.  The site manager states:

"I do not claim to have made, scanned or drawn all of the blueprints on this website. I did on the other collect, edit and host all of them, free of charge, in my spare time.

Continue reading

 
To Top

My Build – Fender Update

• CATEGORIES: Biscuit, Features This site contains affiliate links for which I may be compensated.

I made good progress over the weekend. As you can see, I was able to mount the fenders and take a few shots of the jeep with the fenders.  It will look good.

In order to fit the fenders, I had to make cutouts in the wheel wells for the headers.  But, as I mentioned in an earlier post, I wanted to fill around the headers.  So, I bought a little bit of stove pipe and used that as a form to wrap fiberglass around the headers.  

The last pic is the fenders with the new covers for the headers.  To match the rest of the underside of the body, I'm going to paint herculiner on the wheelwell of the fenders (which saves a bunch of finish work) and fill in the gaps and paint the top and inside of the headers.

Here are some pics below.

Continue reading

 
To Top

Reader Pix — David’s Parents at the Sand Dunes

• CATEGORIES: CJ-2A, Features, News This site contains affiliate links for which I may be compensated.

A reader named David has shared an old picture of his parents racing around the sand dunes in what looks to be a CJ-2A.  This picture is a good reminder that you don't need a fancy jeep to go out and enjoy a day in the sand.  David will be sending a few more pictures along with some background text soon.  Thanks David!

 
To Top

1953 CJ-3B Kimberly, Idaho eBay

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

This CJ-3B has about 23,000 miles on it.  The body looks in good shape, though the new paint job could possibly be hiding dings and rust. The rims are interesting — I'm not sure if those are newer or old rims.  Kimberly is 2 hours southeast of Boise.

"This is willy. a 1953 Willys CJ 3B 4cyl Jeep 4×4 in nice condition. This is a very fun Jeep to drive in the summer! It has been recently re-painted in a blue to purple coat/clear coat. New Bikini top & doors, new (USED) seats. All new Diamond plate was installed.  A very solid Jeep overall. Runs great with no mechanical issues. Has a very nice set of tires wrapped around a new set of rims. The tires have lots of tread life left. Pardon the mud! See the pictures!"

View all the pics on eBay 

 
To Top

1948 CJ-2A Arvada, CO **SOLD**

• CATEGORIES: CJ-2A, Mighty Mites, Unique Jeeps This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500

“1948 Willys Jeep CJ-2A. AS-IS parts or restore. No title. The drive train is complete But the chassis is shot. We do have a few other little parts in a box that we didn’t want to walk off in the wrong hands. Overall this truck has a whole lot of potential. We also have a few other jeeps and 3 1/2 Mighty Mites for sale as well. We are liquidating some of the collection. ”

 
To Top

1948 CJ-2A Portland, Or $2500

• CATEGORIES: Transfer Cases This site contains affiliate links for which I may be compensated.

This jeep's been family owned since 1955.  It's a bit rough and that poorly mounted roof doesn't help it's look.

"Original Willys Jeep that needs some TLC. Civilian model with tailgate. Been in my family since 1955 with only 2 owners before that. Have half hard top plus frame and canvas doors for canvas top. Doors have canvas with see through windows on frames now. Less than 5000 miles on engine rebuild. Odometer froze at 25,000 miles but probably only has 30,000 total miles if that. Never used for anything but hunting. E-mail for more pics. Call if interested, Ray 503-780-6968"

http://portland.craigslist.org/mlt/car/780107350.html 

 
To Top

1942 GPW + Bantam Trailer Bellingham, Wa $3800

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

There's definitely some work to be done on this package.

"Broken Leg forces sale! Serious buyers only please, no trades. Engine runs (134L head go devil) 4 combat rims & brand new military tires. Started to tear down for sheet metal work & paint, but unfinished. Box of spare parts goes with. Clear title, same owner last 8 years. Have Bantam trailer fender (is missing in pictures). Would be beautiful restored. Call 360-733-5911 or email aeschliman4@comcast.net for more photos or with questions."

http://bellingham.craigslist.org/car/780675621.html 

 
To Top

1945 MB North Dakota eBay

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

Ok, I like the big gun.  Hard to find jeeps with big guns in them anymore.  I know it says replica, but maybe it actually shoots?

"1945 Willys MB.  This army jeep is ready for parades, shows, or just driving around. Comes with everything as shown, including .50 cal replica. With the exception of a later hood and T-90 transmission, this is a very complete (original) MB. The steering is tight, brakes are good, engine runs fine, and the tires are three years old. The four wheel drive is fully operational."

View more pics at eBay 

 
To Top

1944 GPW Cincinnati, OH **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7000

“1944 ford willys jeep from world war II ,completly redone new top tire engine overhaul and more …original manuals ..runs great and good for parades or just to have if your a collector.miles are 23000 and to the best of our knowledge are to be correct as per the title states ..jeep is in great shape and with the 4 wheel drive will go any where offroad ..more pictures available upon request . we are asking 7000.00 but are open to any reasonable offers.”

 
To Top

Why a Roll Cage is a good idea

• CATEGORIES: Features, News This site contains affiliate links for which I may be compensated.

Take one look at this photo and you can see why having a good roll cage is smart.  The driver of this jeep, 63 year old Alvin Baldwin, died in the rollover after being ejected.  The link to the original article no longer exists.  It occurred outside Virginia City.

 
To Top

Drive Cycles and Emissions

• CATEGORIES: Features, News This site contains affiliate links for which I may be compensated.

Well, I learned something new today:  Drive Cycles …. 

A couple days ago my 1997 BMW 540i failed an emissions test (for the second year in a row).  Last year I had shown enough money spent on the engine to get a waiver.  This year, I was a little nervous because I didn't know whether they'd give me a second waiver or not.  (This vehicle is a blast to drive and a PIA to take care of or work on!!)

Well, I just got done speaking with the head of the Air Quality Testing for ADA County, my new friend Roger (I have to say that it's nice to be able to talk to the head of the department — that's one nice thing about living in a small populated state).  What happened was not that I failed, but that they couldn't read my car's computer.  The reason was that I have not completed a drive cycle since the last time I reset my car's computer codes (Any time I work on it, I reset the codes to see if I have fixed the problem).  I figured anytime I got into the car and drove it that the computer would be on and recording normally.  However, until a drive cycle is complete, none of my monitors (which are really groups of codes) are actually capable of being read.  So, Roger, who said he consulted with the EPA back in 1992, said he had a good deal of insight into what constituted a drive cycle.

Continue reading